Muhib Ur Rehman

ELECTRICAL ENGINEER

Current Address: Kot abdul malik sheikhupura

road, Lahore
Home Address: Near Gate No. 2 kamra cantt
Tehsil Hazro, District Attock.
E-mail: [email protected]
Cell: (+92)3155368813

PEC Registration # ELECT/66968

PROFESSIONAL SUMMARY
Highly-Intelligent PLC Programmer and Electrical Engineer with extensive knowledge of
ABOUT ME
programmable logic controllers and their functions. Looking to fill a position in which my experience
can be asset to the company.
Learning to be a good
Over 3 years of diversified experience in the field of Electrical/Automation troubleshooting,
Engineer. Wanted to secure
a position within a well- installation, testing and PLC programming of Inverters, Servo Drivers, Stepper Motors, Control
established organization Panels, Field instruments installation.
with a stable environment
that will enable me to use EMPLOYMENT HISTORY
my skills and abilities to Management Trainee officer (MTO) (August 2017-- November 2019)
work well with peoples.
aimed to help out the
Infinity Engineering (Pvt.) Ltd Lahore (50001:2011
organization for better Certified)
Outcome with all of my
sincerity.
Responsibilities
➢ Implement effectively all applicable ISO 50001:2011 standards requirements in the
PERSONAL respective areas.
➢ Energy Monitoring devices installation with machines and Electrical panels.
INFORMATION ➢ Plan Predictive maintenance for industrial system (Motors, Transformer, Bearings,
Status: Committed
Panels, Compressed Air system, Water pumps, HVAC system).
Domicile: Punjab (Attock)
➢ Servo motor troubleshooting, installation and it’s complete PLC Programing along
with HMI screen designing.
INTERESTS ➢ Stepper motor installation and it’s complete PLC programing.
Seeking Automation ➢ VFDs/Inverters troubleshooting, installation and its complete PLC programming
along with parameter setting.
field (PLC, HMI, DCS &
➢ Control panels troubleshooting and installation (Star delta starter, reverse forward
SCADA System) related
circuit)
Knowledge, provide
➢ Startup Installation, execution, commissioning & Managing project.
trainings to the
➢ Ensuring all production activities related to electrical system aimed at achieving good
youngsters & attend
and consistent quality products, minimize complaints & non conformances and quick
workshops related to the response to fulfill planner demands.
Automation and Control. ➢ Provide trainings regarding PLC’s to youngster and employees.
➢ Perform thermography of different industrial i.e. HVAC system, Bearings, Motors,
Transformer, panels, Compressors and water system.
➢ Conduct energy audits to identify where system and operational changes can be
made to decrease the property’s energy consumption and Plan Preventive
Maintenance. Using instruments;
o Three Phase Analyzer (Harmonics, Voltage and current Unbalance
detection, Power factor measurements, Phase sequence detection)
 o Ultrasonic detector (Air and steam leakage detection, Motor Bearings
checking)
o Thermal imaging Camera (Thermography of transformer, motors,
building, cable trays, Power Panels, Compressors, Furnaces, Boilers, Heat
exchangers
o Earth tester (Checking Earth Point)
o Data logger (Air Pressure, current, Voltage, Electrical Powers and Power
Factor Monitoring)
o LUX meter (Lighting system Audit)
o Anemometer (Air flow measurement)
o PH and TDS meter (Water testing)
o IR Gun (Surface Temperature Identification)
o CO2 Meter (Carbon dioxide level Measurements)
(PLC Programmer) (December 2017—Present)
Automation Services Provider
Responsibilities
➢ Development of PLC program and HMI designing equipping with PLC/HMI
according to client’s requirement.
Certifications
Programmable Logic Projects Completed
Controller & Energy ➢ PID base Temperature control system using thermocouple.
Efficiency Managements ➢ Develop HVAC system control and Monitoring through cell phone (LAN/WAN).
➢ Develop Complete program for Automatic Needle assembling machine (Al-Badr
Pharmaceutical Company)
➢ Servo motor troubleshooting installed with Needle Assembling machine (Injection
System Pharmaceutical Company)
➢ Complete Programing of Blister Machine (Unisa Pharmaceutical Company)
➢ Troubleshooting of Blister Machine (Solaugh sun pharmaceutical Company)
➢ Printing Machine troubleshooting
➢ Injection Molding Machine
➢ Turbine Monitoring (Infinity Engineering Lahore)
➢ Paper Cutter Machine
➢ Brush Punching Machine

Experience
➢ SCADA screen designing for Allen Bradley PLC using ignition software.
➢ Experience in the installation, repair, testing and maintenance of electrical systems,
wiring, tools, appliances, and fixtures.
➢ Hand on Experience of installation of Star Delta base control system for induction
motor using Relays/Magnetic contactors and PLC controller.
➢ Development of PLC program for Speed and Direction control of Induction motor
using Analog signals and Digital signals.
➢ Hand on Experience of designing PLC program for temperature control using RTD
and Thermocouples (J-type and K-type).
➢ Hand on Practical experience of programming, installation and troubleshooting of
Different PLC brands such as
o Delta (ES2, EX2, SS2)
o Siemens (S7 1200)
o Allen Bradley (Micro Logic 1400)
o Mitsubishi (FX1S-20MT, FX1N, FX 2U, FX 3U, FX 3G and FX 5U)
 o LG (Master K 300s), Fatek FBs-10MA
➢ Ladder logic development of PID base control system for Temperature control
and Pressure Control system.
➢ D/A Modules, Proximity sensor, Limit switch, Load Cell modules, PT module,
TC modules, Invertors, Pneumatic Valves.

➢ Installation and Configuration different field Instruments and also did their
communication with PLC such as Flow transmitter, Pressure transmitter, A/D and
Rotary Encoder base control system designing i.e. direction detection, RPM
measurement and angle measurement using Encoder.
➢ Servo Motor control system designing while using different control techniques i.e.
Position Control Mode, Speed Control Mode and Torque Control mode
➢ Ladder logic development of VFD (Variable Speed Drive) base control system to
control direction and Speed of induction motor using Modbus Communication
(RS485) and Analog/digital pins.
➢ PLC Programming for Stepper Motor Control system.

➢ Link communication, Modbus Communication, Direct link Control system

designing using different Communication protocols includes; PLC Communication
o PLC to VFD control and Parameter setting using Modbus Communication
o PLC to PLC Control using Link Communication
o HMI with Multiple PLCs using Link communication
o PLC control through HMI using Direct link communication
o Security Setting
➢ Practical Hand on experience in HMI Designing and Installation that includes
different brands such as; Delta, Weintek, Siemens, Fatek. Technical Skills:
o Alarm Setting
o I/O’s Monitoring
o Micro Programming
o History DATA setup (USB backup)
o Bar Graph and Trend graph
o Security Setting.
o Wifi based monitoring

SOFTWARE SKILLS
➢ MATLAB software
➢ Arduino software
➢ MS Excel (Filters, Pivot Table, trend and forecasting, Solver etc.)
➢ Ignition (SCADA Software)
➢ WPL software, ISP software (for Delta PLC)
➢ DOP software (for Delta HMI)
➢ GX developer / GX Works 2 / GX Works 3 (for Mitsubishi PLC)
➢ Easy Builder Pro software (EB 6000, EB 8000 for Weintek HMI)
➢ Sematic Step 7 software (Siemens)
➢ WinProladder software (Fatek PLC)
➢ FvDesigner software (Fatek HMI)
➢ RS Logix 500 (Allen Bradley PLC)
➢ KGL WIN software (for LG PLC)
➢ ASDA software (for Delta Servo Driver)
➢ Microsoft Office (Word, PowerPoint, Visio)
➢ E-draw Max (Layout Designing)
➢ Proteus (for PCB designing)
➢ Power simulator (Power System Analysis)
DOCUMENTATION SKILLS
➢ Prepared following organizational documents as per ISO 29990:2010 standard:
• Weekly report (Obeya Meeting)
• Monthly reports (KPIs Meeting)
• Documents regarding additional scope
Single handedly maintained all documents in hard and soft form

PROFESSIONAL SKILLS
➢ Excellent work ethic and time management.
➢ Strong critical thinking ability to assess and diagnose issues.
➢ Flexibility to work non-traditional hours when required.

EDUCATION
(2013--2017)
BSc Engineering in Electrical Power (3.03 CGPA)
HITEC University Taxila Cantt
(2010--2013)
DAE - Diploma of Associate Engineer in Electrical
(A+ Grade)
Punjab Board of Technical Education
(2009--2010)
Matriculation in Computer Science (A Grade)
Rawalpindi Board