Scribd
Upload
443 views2 pages

Perform Calibration Certification On Your Own Eddy Current Instrument Without Costly Shipments and Down Time !

The document discusses a new Gain Test Box that allows users to certify their eddy current instrument's calibration without sending it to the manufacturer, saving on costs and downtime. The Gain Test Box verifies factors like frequency, amplitude, gain, and linearity when used with an oscilloscope, frequency counter, and appropriate adapter cable for the specific instrument. It provides an easy, on-site way to meet annual calibration requirements according to Boeing specifications.

Uploaded by

sakin hoitm
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
443 views2 pages

Perform Calibration Certification On Your Own Eddy Current Instrument Without Costly Shipments and Down Time !

The document discusses a new Gain Test Box that allows users to certify their eddy current instrument's calibration without sending it to the manufacturer, saving on costs and downtime. The Gain Test Box verifies factors like frequency, amplitude, gain, and linearity when used with an oscilloscope, frequency counter, and appropriate adapter cable for the specific instrument. It provides an easy, on-site way to meet annual calibration requirements according to Boeing specifications.

Uploaded by

sakin hoitm
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

Perform Calibration Certification

on Your Own Eddy Current


Instrument without Costly
Shipments and Down Time !

VM Products, Inc. now provides a new, easy to use, “Gain Test Box” to measure and verify your eddy
current instrument’s calibration. Using the VMGTB-100 Gain Test Box, in conjunction with a standard
oscilloscope and frequency counter, you can CERTIFY that your Eddy Current instrument meets the
requirements of Boeing Specification BSS 7048. Eliminate the need and expense of sending the instru-
ment to the manufacturer every year for calibration certification. Approved test procedures for each
specific instrument are included with the system.

VMGTB-100 Test System will Verify: Required Equipment:

• Internal Oscillator Frequency • VMGTB-100 Gain Test Box


• Internal Oscillator Amplitude • Oscilloscope and Frequency Counter with
• Receiver Amplification Gain current NIST Certification. The FLUKE 123 is
• Receiver Linearity recommended and provides both features in a
• Receiver Stability single instrument
• Alarms • Fischer Triaxial Adapter for specific instrument
• Certification Procedure

VM Products, Inc. P.O. Box 44926, Tacoma, WA 98444


Specialists in Eddy Current Probes, Tel: (253) 841-2939 / Fax: (253) 841-3016
Reference Standards, Applications,
Research & Development www.vmproducts.net * [email protected]
VMGTB-100 Test System Required Equipment List
The following equipment is required to perform the Calibration Certification:
• VMGTB-100 Gain Test Box (includes one VM99BB-2 BNC/BNC cable)
• *Oscilloscope, minimum 20 MHz and 10mV sensitivity
• *Frequency Counter capable of measuring frequencies from 100Hz to 2MHz
• Fischer Triaxial cable for specific eddy current instrument (listed below)
*Fluke 123 SCOPEMETER is the recommended instrument. It provides both the oscilloscope
and frequency counter in one instrument.
Electronics
INSTRUMENT MANUFACTURER AND MODEL
VM Products, Inc.
VMGTB-100 GAIN TEST BOX
(INCLUDES 1, VM99BB-2, 2 FOOT LONG BNC/BNC CABLE)

FLUKE
123 SCOPEMETER
Cables
INSTRUMENT VM PART
MANUFACTURER CONNECTOR NUMBER
AND MODEL

OPTIONAL REPLACEMENT BNC to BNC Cable VM99BB-2

NORTEC
19e and 19eII 8-Pin Burndy to Fischer Triaxial VM99BDY-102F
24 8-Pin Burndy to Fischer Triaxial VM99BDY-102F
1000S Lemo 14-Pin to Fischer Triaxial VM99L14-102F
2000S & 2000D Lemo 16-Pin to Fischer Triaxial VM99L16-102F
ZETEC
MIZ-20 & MIZ-22 4-Pin Amphenol to Fischer Triaxial VM99MS-102F
MIZ-21, 21A, 21B & 21SR 4-Pin Fischer to Fischer Triaxial VM99Z21-102F
HOCKING
2200 Lemo 12-Pin to Fischer Triaxial VM99L12-102F
Phasec 2D Lemo 12-Pin to Fischer Triaxial VM99L12-102F
Phasec 2S Lemo 12-Pin to Fischer Triaxial VM99L12-102F
Locator 2S Lemo 7-Pin to Fischer Triaxial VM99L7-102F

You might also like