Scribd
Upload
459 views2 pages

Berflex: Description Method of Application

Berflex is a single component acrylic co-polymer liquid that can be used as a waterproof coating for both horizontal and vertical surfaces. It has excellent flexibility and adhesion properties allowing it to be used on new and older structures. Berflex is applied in two coats and dries within 1-6 hours, forming a waterproof protective film. It is suitable for roofing, terraces, and other applications.

Uploaded by

usama
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
459 views2 pages

Berflex: Description Method of Application

Berflex is a single component acrylic co-polymer liquid that can be used as a waterproof coating for both horizontal and vertical surfaces. It has excellent flexibility and adhesion properties allowing it to be used on new and older structures. Berflex is applied in two coats and dries within 1-6 hours, forming a waterproof protective film. It is suitable for roofing, terraces, and other applications.

Uploaded by

usama
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

Berflex is suited for horizontal vertical

BERFLEX surfaces.

Single component acrylic co – polymer Berflex can be used for waterproofing of


liquid waterproofing membrane new structures as well as old structures.

DESCRIPTION METHOD OF APPLICATION


Berflex is a single component acrylic co – The surface has to be cleaned thoroughly
polymer based water proof coating having so that all dirt, oil, laitance, dust etc. is
excellent flexibility and weatherproof removed. In case of metal surfaces, rust
characteristics. Due to its excellent and other contaminated and loose particles
adhesive nature, it is an ideal material for shall be removed. All cracks shall be treated
vertical and horizontal applications. and repaired properly before the application
of berflex. Berflex prime coat shall be
ADVANTAGES applied by diluting 1 kg with 2 liters of water
 Weatherproof protective coating. by means of sprayer, brush or roller.
 Excellent thermal insulation.
APPLICATION
 Can be used on a variety of
First coat of Berflex shall be applied over
substrates such as concrete,
the primed surface. Once the surface is able
asbestos sheets, cement, zinc and
to take next coat, apply the second coat. If
Gl sheet, timber, light weight
required, glass fiber reinforcement shall be
concrete PU Foam.
placed after the application of the first coat,
 High elasticity and tensile strength of
when the first coat is still in tacky position i.e
the cured membrane enables it to
first coat has not completely dried. Over this
accommodate roof movement.
glass fiber reinforcement, the above said
 Easy to use, single component and second coat shall be applied. Touch dry film
bio-friendly material
thickness of 310 micron can be achieved by
 Resistant to UV radiations. applying 0.5 liter Berflex per square meter.
 Anticorrosive and chemical resistant The touch drying time of such film is
coating. approximately 01 hour and 15 minutes.
Application temperature ranges between
USES
5°c to 30°c. Avoid application in windy and
Berflex can be used for roof slabs, terraces,
extreme temperature conditions.
balconies, sunshades, parapet walls, etc.
COLOR
Berflex is ideally suited for application on
Berflex is available in white color. Other
structures having complicated geometry like
colors shall be made available on request.
domes, arches, shells, folded plates,
paraboloids, and corrugated sheets.

Document No: BER.TDS.10


Edition Date: May, 2014
Issue # : 02
COVERAGE
1.5 kg Berflex covers one square meter in 2
coats (with dry film thickness of1mm).

CURING TIME
Touch dry 1 hour

Completely dry 4 – 6 hours

SHELF LIFE
Up to one year in closed container if stored
properly.

PACKING
5, 15 kg bucket

SAFETY PRECAUTIONS
Avoid contact with eyes or sensitive skin.
Wash thoroughly if eyes or sensitive skin
gets affected.

NOTICE

Berger Paints Pakistan Ltd. Is manufacturer


and supplier of materials and cannot
therefore act in an engineering capacity in
giving of advice or diagnosis of structural or
related problems. Thus it cannot accept any
liability arising either directly or indirectly
from the use of its products whether or not
in accordance with any advice
recommendation or information, written or
otherwise, supplied by it. The above
information is based on the present
available knowledge and may be changed/
amended with new developments.

Document No: BER.TDS.10


Edition Date: May, 2014
Issue # : 02

You might also like