Scribd
Upload
3K views2 pages

ATR4518R4: Antenna Specifications

This document summarizes the specifications of the ATR4518R4 EasyRET Tri-Band Antenna, which includes: - Frequency ranges of 790-960 MHz, 1710-2690 MHz (left array), and 1710-2690 MHz (right array) - Electrical properties including gain, side lobe suppression, beamwidth, isolation, and maximum power - Mechanical properties such as antenna dimensions, weight, wind load, and connector type - Integrated RET specifications including adjustment time, power consumption, protocols, and lightning protection.

Uploaded by

Dmytrii Nikulin
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
3K views2 pages

ATR4518R4: Antenna Specifications

This document summarizes the specifications of the ATR4518R4 EasyRET Tri-Band Antenna, which includes: - Frequency ranges of 790-960 MHz, 1710-2690 MHz (left array), and 1710-2690 MHz (right array) - Electrical properties including gain, side lobe suppression, beamwidth, isolation, and maximum power - Mechanical properties such as antenna dimensions, weight, wind load, and connector type - Integrated RET specifications including adjustment time, power consumption, protocols, and lightning protection.

Uploaded by

Dmytrii Nikulin
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

ATR4518R4

DXXX-790-960/1710-2690/1710-2690-65/65/65-16i/18i/18i-M/M/M-R
EasyRET Tri-Band Antenna with 3 Integrated RCUs - 2.0m

Antenna Specifications
Electrical Properties
790 - 960 2 x (1710 - 2690)
Frequency range (MHz)
790 - 862 824 - 894 880 - 960 1710 - 1990 1920 - 2200 2200 - 2490 2490 - 2690
Polarization +45° , -45°
Electrical downtilt (°) 0 - 10 , continuously adjustable 0 - 10 , continuously adjustable
0° 5° 10° 0° 5° 10° 0° 5° 10° 0° 5° 10° 0° 5° 10° 0° 5° 10° 0° 5° 10°
Gain (dBi)
15.7 15.9 15.6 16.0 16.1 15.6 16.1 16.3 15.8 17.5 17.3 17.0 17.8 17.8 17.3 18.0 18.0 17.6 17.8 18.2 17.7
Side lobe suppression (Typ.) (dB) 0° 5° 10° 0° 5° 10° 0° 5° 10° 0° 5° 10° 0° 5° 10° 0° 5° 10° 0° 5° 10°
-for first side lobe above main beam 18 18 18 18 18 18 18 18 18 16 16 17 17 17 17 17 18 18 17 18 18
-within 0° - 15° sector above horizon 17 17 16 17 17 16 17 17 17 15 15 15 16 16 16 16 16 16 15 15 15
Horizontal 3dB beam width (°) 65 64 62 65 62 60 60
Vertical 3dB beam width (°) 10.1 9.8 9.3 5.8 5.4 4.8 4.3
VSWR < 1.5
Intra-system: ≥ 28
Isolation between ports (dB)
Inter-system: ≥ 30
Front to back ratio, copolar (dB) Typ. 28
0° Typ. 18
Cross polar ratio (dB)
±60° Typ. 10
Max. power per input (W) 500 (at 50℃ ambient temperature) 250 (at 50℃ ambient temperature)
Intermodulation IM3 (dBc) ≤ -153 (2 x 43 dBm carrier)
Impedance (Ω) 50
Grounding DC Ground

Mechanical Properties 106


Antenna dimensions (H x W x D) (mm) 1999 x 349 x 166
Packing dimensions (H x W x D) (mm) 2350 x 415 x 240
Antenna weight (kg) 25
Clamps weight (kg) 3.56 (2 units)
Antenna packing weight (kg) 39.8 (Included clamps)
Mast diameter supported (mm) 50 - 115
Radome material Fiberglass
Radome colour Light grey
Operational temperature (℃) -40 .. +65
1892
1999

Frontal: 705 (at 150 km/h)


Wind load (N) Lateral: 230 (at 150 km/h)
Rear side: 730 (at 150 km/h)
Max. operational wind speed (km/h) 150
Survival wind speed (km/h) 200
Connector 6 x 7/16 DIN Female
Connector position Bottom

Accessories
Item Model Description Weight Units per antenna

Downtilt kit ASMDT0D01 Mechanical downtilt: 0 - 12 ° 2 kg 1 (Separate packing)

1
ATR4518R4
DXXX-790-960/1710-2690/1710-2690-65/65/65-16i/18i/18i-M/M/M-R
EasyRET Tri-Band Antenna with 3 Integrated RCUs - 2.0m

Integrated RCU Specifications


Properties
RET type Integrated RET
RET protocols* AISG 2.0 / 3GPP
Input voltage range (V) 10 - 30 DC
< 10 (motor activated)
Power consumption (W)
< 0.5 (stand by)
Adjustment time (full range) (s) < 50 (typically, depending on antenna type)
2 x 8 pin connector according to IEC 60130-9
RET connector
Daisy chain in: Male / Daisy chain out: Female
1 2 3 4 5 6 7 8
Pin assignment according AISG
DC n/c RS-485B n/c RS-485A DC DC return n/c
3 (10/350 μs)
Lightning protection (kA)
10 (8/20 μs)

* Please confirm the AISG protocol of primary station is compatible with RET antenna protocol interface. The protocol of RET antenna software
interface is switchable between AISG 2.0/3GPP and AISG 1.1 with a vendor defined command. For more details about protocol swi tching function,
contact Huawei before system installation.

Standards: EN 60950-1 (Safety), EN 55022 (Emission), EN 55024 (Immunity), ETSI EN300386 (1.4.1), FCC part15
Certification: CE, FCC, RoHS, WEEE

Integrated RCU S/N: HWMxxx..….r


HWMxxx….yL
HWMxxx..yyR

r - Red y - Yellow
L - Left array R - Right array

790 - 960 MHz 1710 - 2690 MHz 1710 - 2690 MHz


(Left) (Right)

Huawei Technologies Co., Ltd. Bantian, Longgang District, Shenzhen 518129, P.R.China www.huawei.com
Any previous datasheet issues become invalid. 2 Issue: 2014-04-22

You might also like