SRT・SRTB・SRT-C SRT・SRTB

Ratchets・Pawls Ratchets & Pawls

Gears

Gears
Spur

Spur
Application
* The illustration is a design example, not a design for machinery or a device in actual use.
Helical

Helical
Gears

Gears
SRT-C Pawls
Internal

Internal
Gears

Gears
Racks

Racks
Lifting Device
■ Features
Characteristics of Pawls and Ratchets ■ Bending strength of Ratchets
Motor
CP Racks

CP Racks
& Pinions

& Pinions
● A simple structure used to restrict the rotational direction in The allowable transmission forces F b (N) of ratchets is the value cal-
one-way. culated by the following formula.
● The tips of pawls and the teeth of ratchets are induction
hardened and therefore have superior durability. b・e 2 1 1
F b ＝ ı b・ ・ ・
SRT Ratchet
6 h SF
Gears

Gears
■ Points to observe during use
Miter

Miter
Also, the SRT Ratchet's allowable torque T (N・m) for bending
● No secondary operations can be performed on tooth ar- strength is calculated by the following formula.
eas including the bottom land (approx. 2 to 3 mm), due
to gear teeth induction hardened. T = F b・rf
Gears

Gears
Bevel

Bevel
● The pawls are designed to prevent reverse rotation. They
are not suitable for use as driving ratchets or driving rota- Where
tion. ı b ＝ Bending stress (Assumed 225.55MPa)
● SRT2/ 3-C is manufactured using a lost wax casting method. b ＝ Face width E (mm) Example: SRT Ratchets used as a free-fall prevention mechanism of a lift device*
● Regarding SRTB ratchets with hubs, please note the e ＝ Root length (mm)
Screw

Screw
Gears

Gears
direction of teeth, viewing from the hub side. KHK can e ＝ Depth of teeth (h) × tan §60 −     
360
·
produce ratchets which have the teeth pointed in the © No. of teeth (z) ¹
opposite direction as a custom order item. h ＝ Depth of teeth (H) (mm)
S F ＝ Safety factor (Assumed 2) SRT-C Pawls
Products Gearboxes Gear Pair

Products Gearboxes Gear Pair

rf ＝ Tooth root radius (m)
Worm

Worm
Outside dia. D ー（2・h）
→ rf ＝           
2000
Bevel

Bevel
SRT Ratchet
Other

Other
Example: ratchets used for complete reverse prevention of worm gears *
Assembly example: KHK Stock Gears Sample Units

412 Please see our web site for corrections on KHK Catalogs. 413
 SRT Pitch 2.09 ∼ 12.57 SRT
Ratchets Series Ratchets
Specifications E Newly added
E

H
Angle of teeth 60°

H
Material S45C

J
I

J
Gears

Gears
Heat treatment Induction hardened teeth
Spur

Spur
I

D
A
Tooth hardness 50 ∼ 60HRC

D
A
T4K
T4
Helical

Helical
Gears

Gears
To order J Series products, please specify; Catalog No. + J + BORE
Bore ＊ The product shapes of J Series items are identified by background color.
Internal

Internal
Keyway Js9 10 12 14 15 16 17 18 19 20 22 25 28 30 32 35 40 45 50
Gears

Gears
No. of Bore Hub dia. Outside dia. Face width Hub width Total length Depth of teeth Center distance Mounting distance Allowable torque (N・m) Allowable torque (kgf・m) Weight Screw size 4 × 1.8 5 × 2.3 6 × 2.8 8 × 3.3 10 × 3.3 12 × 3.3 14 × 3.8
Catalog No. Pitch Shape
teeth A B D E F G H I J Bending strength Bending strength （kg） Catalog No. ―
SRT2/3-50 50 10 33.3 33.84 15.67 3.07 0.31 0.035 SRT2/3-50 J BORE
SRT2/3-60 60 10 40 35.51 19 4.10 0.42 0.053 SRT2/3-60 J BORE
SRT2/3-80 2.09 80 T4 12 ― 53.3 6 ― 6 1 39.48 25.67 6.00 0.61 0.096
Racks

Racks
SRT2/3-90 90 12 60 41.73 29 7.11 0.73 0.12 SRT2/3-80 J BORE
SRT2/3-100 100 12 66.6 44.11 32.33 8.24 0.84 0.15 SRT2/3-90 J BORE
SRT1-50 50 12 50 45.48 23.4 14.7 1.50 0.16 SRT2/3-100 J BORE
SRT1-60 60 15 60 48.24 28.4 19.5 1.99 0.24
SRT1-80 3.14 80 T4 15 ― 80 12 ― 12 1.6 54.73 38.4 29.4 3.00 0.44 SRT1-50 J BORE
SRT1-90 3.52 0.56
CP Racks

90 15

CP Racks
90 58.35 43.4 34.5
& Pinions

& Pinions
SRT1-60 J BORE
SRT1-100 100 15 100 62.16 48.4 39.4 4.02 0.70
SRT1-80 J BORE
SRT2-30 30 15 60 61.23 26.9 29.0 2.96 0.28
5.02 0.53 SRT1-90 J BORE
SRT2-40 6.28 40 15 80 66.23 36.9 49.2
SRT2-50 50 T4 15 ― 100 15 ― 15 3.1 72.28 46.9 70.8 7.22 0.85 SRT1-100 J BORE
SRT2-60 60 15 120 79.14 56.9 94.3 9.61 1.24 SRT2-30 J BORE
SRT3-30 30 15 90 76.32 40 92.6 9.44 0.86 SRT2-40 J BORE
SRT3-40 9.42 40 T4 20 ― 120 20 ― 20 5 85.15 55 158 16.1 1.58
Gears

Gears
Miter

Miter
SRT3-50 50 20 150 95.52 70 229 23.3 2.54 SRT2-50 J BORE
SRT2-60 J BORE
SRT4-30 30 20 120 95.74 52.6 226 23.0 1.89
SRT4-40 12.57 40 T4 20 ― 160 25 ― 25 7.4 108.03 72.6 385 39.3 3.53 SRT3-30 J BORE
SRT4-50 50 20 200 122.37 92.6 559 57.0 5.66 SRT3-40 J BORE
〔Caution on Product Characteristics〕 ① Regarding SRTB ratchets with hubs, please note the direction of teeth, viewed from the hub side. KHK can produce ratchets that have teeth pointed in SRT3-50 J BORE
the opposite direction as a custom order item.
Gears

Gears
Bevel

Bevel
SRT4-30 J BORE
② Due to heat treating, some deformation of the bore may occur. It may be necessary to ream the bore to bring to the stated dimensions. SRT4-40 J BORE
SRT4-50 J BORE
[Caution on Secondary Operations] ① Due to gear teeth induction hardened, no secondary operations can be performed on tooth areas including the bottom land (approx. 2 to 3 mm).
[Caution on J series] ① As available-on-request products, requires a lead-time for shipping within 2 working-days (excludes the day ordered), after placing an order.
Please allow additional shipping time to get to your local distributor.
Screw

Screw
Gears

Gears
② Number of products we can process for one order is 1 to 20 units. For quantities of 21 or more pieces, we need to quote price and lead time.
③ Keyways are made according to JIS B1301 standards, Js9 tolerance.
④ Certain products which would otherwise have a very long tapped hole are conterbored to reduce the length of the tap.
⑤ Areas of products which have been re-worked will not be black oxide coated.
⑥ For products having a tapped hole, a set screw is included.
Products Gearboxes Gear Pair

Products Gearboxes Gear Pair

Worm

Worm
SRT-C Pitch 2.09 ∼ 12.57 SRT-C
Pawls Pawls
Bevel

Bevel
Specifications (N)

Angle of teeth 60° M P

FD
Material S45C 60°
(L)
Other

Other
Heat treatment Induction hardened teeth
K

Tooth hardness 50 ∼ 60HRC

＊ FD has die-forged finish. T5

Weight
Catalog No. Shape K (L) M (N) P
（kg）
SRT2/3-C 5 (8) 30 (38) 6 0.020
SRT1-C 8 (10) 39 (49) 12 0.057
SRT2-C T5 10 (12.5) 55 (67.5) 15 0.13
SRT3-C 12 (15) 65 (80) 20 0.23
SRT4-C 13 (18) 80 (98) 25 0.38

〔Caution on Product Characteristics〕 ① The pawls are designed to prevent reverse rotation. They are not suitable for use as
driving ratchets or driving rotation.
② SRT2/3-C is manufactured using a lost wax casting method.

414 Please see our web site for corrections on KHK Catalogs. 415
 SRTB Pitch 2.09 ∼ 12.57 SRTB
Ratchets Series Ratchets
G Newly added
Specifications E F G
E F

H
Angle of teeth 60°
K

H
Material S45C

J
Gears

Gears
Heat treatment Induction hardened teeth I I
Spur

Spur
D
A
B
Tooth hardness 50 ∼ 60HRC

D
A
B
Screw offset (K) Half of (F)

T9K
T9
Helical

Helical
Gears

Gears
To order J Series products, please specify; Catalog No. + J + BORE
Bore ＊ The product shapes of J Series items are identified by background color.
Internal

Internal
Keyway Js9 10 12 14 15 16 17 18 19 20 22 25 28 30 32 35 40 45 50
Gears

Gears
No. of Bore Hub dia. Outside dia. Face width Hub width Total length Depth of teeth Center distance Mounting distance Allowable torque (N・m) Allowable torque (kgf・m) Weight Screw size 4 × 1.8 5 × 2.3 6 × 2.8 8 × 3.3 10 × 3.3 12 × 3.3 14 × 3.8
Catalog No. Pitch Shape
teeth A B D E F G H I J Bending strength Bending strength （kg） Catalog No. ―
SRTB2/3-50 50 10 25 33.3 33.84 15.67 3.07 0.31 0.067 SRTB2/3-50 J BORE
SRTB2/3-60 60 10 30 40 35.51 19 4.10 0.42 0.10 SRTB2/3-60 J BORE
SRTB2/3-80 2.09 80 T9 12 35 53.3 6 10 16 1 39.48 25.67 6.00 0.61 0.16
Racks

Racks
SRTB2/3-90 90 12 40 60 41.73 29 7.11 0.73 0.21 SRTB2/3-80 J BORE
SRTB2/3-100 100 12 40 66.6 44.11 32.33 8.24 0.84 0.24 SRTB2/3-90 J BORE
SRTB1-50 50 12 35 50 45.48 23.4 14.7 1.50 0.24 SRTB2/3-100 J BORE
SRTB1-60 60 15 40 60 48.24 28.4 19.5 1.99 0.34
SRTB1-80 3.14 80 T9 15 50 80 12 12 24 1.6 54.73 38.4 29.4 3.00 0.61 SRTB1-50 J BORE
SRTB1-60 J BORE
CP Racks

CP Racks
SRTB1-90 90 15 50 90 58.35 43.4 34.5 3.52 0.73
& Pinions

& Pinions
SRTB1-100 100 15 50 100 62.16 48.4 39.4 4.02 0.87 SRTB1-80 J BORE
SRTB2-30 30 15 50 60 61.23 26.9 29.0 2.96 0.47 SRTB1-90 J BORE
SRTB2-40 40 15 60 80 66.23 36.9 49.2 5.02 0.82
6.28 T9 15 14 29 3.1 SRTB1-100 J BORE
SRTB2-50 50 15 60 100 72.28 46.9 70.8 7.22 1.14
SRTB2-60 60 15 65 120 79.14 56.9 94.3 9.61 1.59 SRTB2-30 J BORE
SRTB3-30 30 15 75 90 76.32 40 92.6 9.44 1.40 SRTB2-40 J BORE
SRTB3-40 9.42 40 T9 20 80 120 20 16 36 5 85.15 55 158 16.1 2.17
Gears

Gears
Miter

SRTB2-50 J BORE

Miter
SRTB3-50 50 20 85 150 95.52 70 229 23.3 3.22
SRTB2-60 J BORE
SRTB4-30 30 20 90 120 95.74 52.6 226 23.0 2.75
SRTB4-40 12.57 40 T9 20 90 160 25 18 43 7.4 108.03 72.6 385 39.3 4.38 SRTB3-30 J BORE
SRTB4-50 50 20 100 200 122.37 92.6 559 57.0 6.72 SRTB3-40 J BORE
〔Caution on Product Characteristics〕 ① Regarding SRTB ratchets with hubs, please note the direction of teeth, viewed from the hub side. KHK can produce ratchets that have teeth pointed in SRTB3-50 J BORE
the opposite direction as a custom order item.
Gears

Gears
Bevel

Bevel
SRTB4-30 J BORE
② Due to heat treating, some deformation of the bore may occur. It may be necessary to ream the bore to bring to the stated dimensions. SRTB4-40 J BORE
SRTB4-50 J BORE
[Caution on Secondary Operations] ① Due to gear teeth induction hardened, no secondary operations can be performed on tooth areas including the bottom land (approx. 2 to 3 mm).
[Caution on J series] ① As available-on-request products, requires a lead-time for shipping within 2 working-days (excludes the day ordered), after placing an order.
Please allow additional shipping time to get to your local distributor.
Screw

Screw
② Number of products we can process for one order is 1 to 20 units. For quantities of 21 or more pieces, we need to quote price and lead time.
Gears

Gears
③ Keyways are made according to JIS B1301 standards, Js9 tolerance.
④ Certain products which would otherwise have a very long tapped hole are conterbored to reduce the length of the tap.
⑤ Areas of products which have been re-worked will not be black oxide coated.
⑥ For products having a tapped hole, a set screw is included.
Products Gearboxes Gear Pair

Products Gearboxes Gear Pair

Worm

Worm
SRT-C Pitch 2.09 ∼ 12.57 SRT-C
Pawls Pawls
Bevel

Bevel
Specifications (N)

Angle of teeth 60° M P

FD
Material S45C 60°
(L)
Other

Other
Heat treatment Induction hardened teeth
K

Tooth hardness 50 ∼ 60HRC

＊ FD has die-forged finish. T5

Weight
Catalog No. Shape K (L) M (N) P
（kg）
SRT2/3-C 5 (8) 30 (38) 6 0.020
SRT1-C 8 (10) 39 (49) 12 0.057
SRT2-C T5 10 (12.5) 55 (67.5) 15 0.13
SRT3-C 12 (15) 65 (80) 20 0.23
SRT4-C 13 (18) 80 (98) 25 0.38
〔Caution on Product Characteristics〕 ① The pawls are designed to prevent reverse rotation. They are not suitable for use as
driving ratchets or driving rotation.
② SRT2/3-C is manufactured using a lost wax casting method.

416 Please see our web site for corrections on KHK Catalogs. 417