0% found this document useful (0 votes)
236 views2 pages

Syntime

This document describes a GPS time synchronization equipment that provides precise timing references for power utilities and industrial applications. It features continuous GPS synchronization, IRIG B and E time code outputs, programmable pulse outputs, and a large digital display of time of day. The core components include a GPS receiver, time code generator, control unit and optional distance view display.
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
236 views2 pages

Syntime

This document describes a GPS time synchronization equipment that provides precise timing references for power utilities and industrial applications. It features continuous GPS synchronization, IRIG B and E time code outputs, programmable pulse outputs, and a large digital display of time of day. The core components include a GPS receiver, time code generator, control unit and optional distance view display.
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

GPS TIME SYNCHRONIZATION EQUIPMENT

DS
SAN
DISTANCE VIEW DISPLAY UNIT

DIGITAL DISTANCE VIEW DISPLAY

GPS LOCK

SYNtime
GPS : Locked
TIME: 16:18:57
Date: 21/08/06
GPS FAIL
GPS TIME SYNCHRONIZER CONFIGURE-SET
DAYS HOURS MINUTES SECONDS
RTC ON

ANTENNA CONTROL UNIT

TIME CODE GENERATOR

Features Time Reference Applications


n Continuous IST reference
n SCADA
n IRIG B & E Time Code output
n Energy Management System
n Programmable Pulse Output
n Dynamic Demand Management System
n Solid State relays for fast pulse response
n Energy Meters - HT Consumers & Feeders
n Large size Time of Day (TOD) display
n ABT / Boundary meters
n All weather water proof antenna
n Disturbance Recorders
n Synchronization software for Server
n Event Loggers
n Applications

Technical Specification
ANTENNA
Model: SS/ANT/03
n Type : 35 dB rooftop Bullet Antenna OPTIONAL
n Power : 5 volt, 25 mA n Remote unit/Signal Booster :For Distance above 100 meters
n Cable : RG-11 co-axial cable, 50 meters

GPS RECEIVER DIGITAL DISTANCE VIEW DISPLAY


Model: SS/GPS/03 Model: HMS-100-7S
GPS Receiver
n L1 frequency, C/A code (1575.42MHz), DS
n 8-channel, continuous tracking receiver, 32 correlators SAN
n Timing Accuracy : ±95 ns UTC/USNO DISTANCE VIEW DISPLAY UNIT

of 1pps output
LED Display
Acquisition n Height : 100 mm (144 mm optional)
n Cold start : less than 160 seconds (90%) n Type : Numeric LED
n Warm start : less than 45 seconds (90%) n Digits : 6 (HH MM SS)
n Hot start : less than 20 seconds (90%)
Input : RS 422 / RS 232 / RS 485
Special features Size (L x B x H) : 745mm x 73mm x 160mm
n Short Circuit Protection
Power : AC: 85-264V, DC:120-370V
n Feed Line Fault Detection Operating Temp. : 0 - 500C

Memory & RTC Battery Optional Inputs : Ethernet, IRIG-B, Wireless


n Type : Lithium 3.5V
n Life : 15000 Hrs with Power-OFF
Self life 10 years when powered

ISO 9001:2008 Certified Company

www.sandsindia.com
TIME CODE GENERATOR

GPS LOCK

SYNtime
GPS : Locked
TIME: 16:18:57
Date: 21/08/06
GPS FAIL
GPS TIME SYNCHRONIZER CONFIGURE-SET
DAYS HOURS MINUTES SECONDS
RTC ON

CONTROL UNIT

Programmable Pulse Outputs Serial Outputs (RS232 / RS422 / RS485)


n Pulses per second/ minute/ quarter hour/ half hour/ hour/ day. n Time string in broadcast/extended ASCII mode 9600,N,8,1
n Pulse outputs : PFC & PC types
n Connector : BNC / Phoenix connectors RS232 : DOY & Time (Connector: 9-pin D Female)
n Signal type : 0-220Vdc,150mA (PFC) RS485 : DOY & Time (Connector: Phoenix)
0-5Vdc, 150mA (PC) Baud Rate : Programmable
n Relay type : Solid State Relay Optional : Meinberg standard time string, ABB-SPA,
n Optional : PFC 3A (Electro Mechanical Relay) HOPF, Aribiter
n RS422 : NMEA String (Connector: Phoenix)
Time Code output
Display
n IRIG-B Modulated
n IRIG-B Pulse Width Modulated n Time Display : LED, 7 Segment 0.5”, 9 digits, DOY HH MM SS
n IRIG-E Modulated n Data Display : 4 x 20 Alphanumeric
n IRIG-E Pulse Width Modulated Date & IST
n Optional : IEEE1344, AFNOR-NFS Receiver & Clock Status
Position - Latitude, Longitude
Optional Time Code Ouputs n Status LED : Size 5mm
GPS Locked - Green
1. SNTP - (Simple Network Time Protocol) 10 Mbits with RJ-45
GPS failed / Local RTC ON - Red
2. SNTP, NTP:
n Keypad : 3 keys
Setup menu & Display functions
n 10/100 Mbits with RJ-45 upto 3 Independent Ethernet ports
n Alarm Contact : GPS Fail contact in PFC
n i386 Compatible 650 MHz CPU, 256 MB SD RAM, CF Card Drive
n Linux OS (Inclusive of PPS Kit)
Physical Characteristics
n Network Protocols - TCP, UDP, Telnet, FTP, SSH, HTTP
n IP Protocols - IPv4, IPv6 n Size :19” rack mountable (2U Height)
n Network Time Protocol - NTPv2, NTPv3, SNTPv3, SNTPv4 (480 mm x 245 mm x 85mm)
n IEC61850 Compliant
n Secure Shell - SSHv1.3, SSHv1.5, SSHv2 Environmental Characteristics
n SNMP - SNMPv1, SNMPv2c, SNMPv3 n Operating Temp. : 0 to 550C
n Humidity : 10-90% Non Condensing
3. Optical Output n Radiated : IEC 61000 - 4 / 3,1995 Compliant
Susceptibility

REDUNDANT MASTER CLOCK SYSTEM FOR GENERATING PLANTS

SUBSYSTEMS

n GPS receiver
n Master Clocks
n Redundant Comparator with
Time Code Generator
n Signal Conditioners for RS 232,
IRIG-B, Pulse, Ethernet
n Redundant Power Supply
with Diode Oring
n Slave Clocks (DDVD)
n Signal Converters
n 19" Rack Mountable 42U Height
Industrial Rack, 800mm Depth

MF-7, CIPET Hostel Road, Thiru.Vi.Ka. Industrial Estate, Ekkaduthangal,Chennai - 600 032.
Tel : (044) 2225 3832 / 33 / 34, Fax: (044) 2225 3831,
E-mail: [email protected].

Product developement is continuous process - Specification subject to change


EDITION : 09-09’
www.sandsindia.com

You might also like