EAR DRIVE O-RING SEAL
TYPE 5610V/5610VQ/5620VP
Technical Specification
A – Face/Primary Ring
B – Ear Drive Retainer
C – Nonclogging Wave
Spring
E
D – Anti-Extrusion Ring
(Only sizes above
75mm / 3.000".)
E – O-ring
5610V seal
head shown
Product Description Performance Capabilities
The specially engineered, fully interchangeable ear drive O-ring • Temperature:
seal head extends the functionality of the 5600 series product -30˚C to 205˚C / -20˚F to 400˚F
line for standard ANSI and large bore pumps. • Pressure: up to 75mm / 3.000": 21 bar g/300 psig max.
The Type 5610V is a single cartridge using the ear drive over 75mm / 3.000": 13 bar g/200 psig max.
O-ring pusher seal head. • Speed: up to 25 m/s / 5000 fpm
The Type 5610VQ is a single cartridge arrangement using the
• End play/axial float allowance: 0.13mm/0.005"
ear drive O-ring pusher seal head along with a quench gland
containing a carbon ring throttle bushing. • Runout/out of squareness: 0.05mm/0.002"
The Type 5620VP is a dual cartridge arrangement using the ear
drive O-ring pusher seal head.
Design Features
• Ear driven primary ring ensures maximum seal life under a
wider range of operating conditions
• Retrofits with existing 5600 seal heads
• Optimized primary ring design provides greater reliability
• Nonclogging wave spring is located outside of the product
EAR DRIVE O-RING SEAL
TYPE 5610V/5610VQ/5620VP
Technical Specification
Type 5610V Type 5620VP
Type 5610VQ Type 5610V Seal Head
Materials of Construction
SEAL COMPONENTS MATERIALS
Description Standard Options
Face/Primary Ring Resin-Impregnated Carbon Sintered Silicon Carbide
Nickel Binder Tungsten Carbide
Retainer 316 Stainless Steel Alloy 20CB3 SS (UNS N8020)
Anti-Extrusion Ring Alloy C-276 (UNS N10276)
Titanium
O-ring Fluoroelastomer Perfluoroelastomer
Ethylene Propylene Buna-N
Neoprene
Spring Alloy C-276 (UNS N10276) —
North America Europe Latin America Middle East & Africa Asia Pacific
United States of America United Kingdom Brazil United Arab Emirates Singapore
Tel: 1-847-967-2400 Tel: 44-1753-224000 Tel: 55-11-3371-2500 Tel: 971-481-27800 Tel: 65-6518-1800
Fax: 1-847-967-3915 Fax: 44-1753-224224 Fax: 55-11-3371-2599 Fax: 971-488-62830 Fax: 65-6518-1803
If the products featured will be used in a potentially dangerous and/or hazardous process, your John Crane representative should be consulted prior to
their selection and use. In the interest of continuous development, John Crane Companies reserve the right to alter designs and specifications without
prior notice. It is dangerous to smoke while handling products made from PTFE. Old and new PTFE products must not be incinerated. ISO 9001 and
ISO14001 Certified, details available on request.
©2015 John Crane Revised 10/15 www.johncrane.com TD-5610V/5610VQ/5620VP
