Assignment 1
Submit the soft copy and hard copy of assignment 1 on or before 20th Feb 2020 12pm.
Group 1: Roll No. 17691A0201-17691A0208, Solve Q. No. 1.
Group 2: Roll No. 17691A0209-17691A0215, Solve Q. No. 2.
Group 3: Roll No. 17691A0217-17691A0223, Solve Q. No. 3.
Group 4: Roll No. 17691A0224-17691A0230, Solve Q. No. 4.
Group 5: Roll No. 17691A0231-17691A0238, Solve Q. No. 5.
Group 6: Roll No. 17691A0239-17691A0246, Solve Q. No. 6.
Group 7: Roll No. 17691A0247-17691A0253, Solve Q. No. 7.
Group 8: Roll No. 17691A0254-17691A0260, Solve Q. No. 8.
Group 9: Roll No. 18695A0201-17691A0207, Solve Q. No. 9.
Group 10: Roll No. 17691A0208-17691A0215, 16691A0235, Solve Q. No. 10.
Q. No. 1. Form the Ybus matrix by using (a) Direct inspection method (b) singular
transformation method for the network shown in Fig. 1 including the generator buses and
compare the results.
Fig. 1
Q. no. 2. Consider the linear graph shown in Fig. 2 below which represents a 4 bus
transmission system with all the shunt admittance lumped together. Each line has a series
impedance of (0.02 + j 0.08) and half line charging admittance of jO.02. Compute the Ybus
by singular transformation. Compute the Ybus matrix also by direct inspection method and
compare the results.
Fig.2
Q. No. 3 A power system consists of 4 buses. Generators are connected at buses 1 and 3
reactances of which are jO.2 and jO.l respectively. The transmission lines are connected
between buses 1-2, 1-4, 2-3 and 3-4 and have reactances jO.25, jO.5, jO.4 and j 0.1
respectively. Find the bus admittance matrix (i) by direct inspection method and (ii) using
singular transformation method, then compare the results.
Q. No. 4 Compute the bus admittance matrix for the power system as shown in figure.3
below by (i) direct inspection method and (ii) by using singular transformation method, then
compare the results.
Fig.3
5. The parameter of a 4-bus system are as under, Find the bus admittance matrix using direct
inspection method.
Bus Code Line Impedance (pu) Charging admittance( Ypq/2)
(pu)
1-2 0.2+j0.8 j0.02
2-3 0.3+j0.9 j0.03
2-4 0.25+j1 j0.04
3-4 0.2+j0.8 j0.02
1-3 0.1+j0.4 J0.01
6. The parameter of a 3-bus system are as under, Find the bus admittance matrix using direct
inspection method.
Bus Code Impedance (pu) Half line Charging admittance
(pu)
1-2 0.06+j0.18 j0.005
1-3 0.02+j0.06 j0.006
2-3 0.04+j0.12 j0.005
7. Form the Zbus matrix for the data given for the network using Zbus building algorithm.
Bus code Impedance (pu)
1-2 0.1
1-3 0.1
2-3 0.1
0-1 0.25
0-2 0.25
8. Form the Zbus matrix for the data given for the network using Zbus building algorithm.
Bus code Impedance (pu)
1-2 j0.2
1-4 j0.25
2-3 j0.3
2-4 j0.4
3-4 j0.15
0-1 j0.1
0-2 j0.1
9. Form the Zbus matrix for the data given for the network using Zbus building algorithm.
Bus code Impedance (pu)
1-2 j0.8
1-3 j0.4
2-3 j0.4
0-1 j0.2
0-2 j0.4
10. Form the Zbus matrix for the network shown below using Zbus building algorithm. Take
bus 1 as the reference bus.
Fig.3
