Scribd
Upload
1K views2 pages

BMW E90 Cablu Plus - Ramane Fara Curent Masina Rezolvare 2

The document provides a 7-step procedure to replace a cable and fuse box if discoloration is evident. The steps include removing the old cable from the harness, routing the replacement cable in the same position, ensuring the new cable is secure and not touching sharp edges, properly routing the harness through the rear passenger area and into the trunk, and connecting the harness to the power distribution box and tightening the retaining nut to 15 Nm.

Uploaded by

MariusŢanu
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
1K views2 pages

BMW E90 Cablu Plus - Ramane Fara Curent Masina Rezolvare 2

The document provides a 7-step procedure to replace a cable and fuse box if discoloration is evident. The steps include removing the old cable from the harness, routing the replacement cable in the same position, ensuring the new cable is secure and not touching sharp edges, properly routing the harness through the rear passenger area and into the trunk, and connecting the harness to the power distribution box and tightening the retaining nut to 15 Nm.

Uploaded by

MariusŢanu
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

B61 08 11 Attachment July 2011

PROCEDURE

1. Replace the cable and fuse box if any discoloration is evident, as shown in the picture below.

2. Please remove the old


cable from the harness.
3. Route the replacement
cable in the same
position as the existing
one. The front passenger
door opening area is
shown with the
passenger seat removed
and the carpet moved
aside.
Note: The carpet does
not need to be fully
removed.
4. Ensure that the new
cable is not touching or
near any sharp edges,
and secure in the
harness as needed.
2

5. The harness routes


through the passenger
rear seat area into the
trunk, as shown in the
picture. Ensure that the
harness is properly
routed through the
grommet.

6. Route the harness into


the trunk and connect to
the Power distribution
box mounted on the
battery (an E90 vehicle is
shown as an example).
7. Torque the battery cable
retaining nut to 15 Nm.

You might also like