PROJECT:

OWNER:
LOCATION:

BILL OF QUANTITIES

MATERIALS LABOR
ITEM ITEM DESCRIPTION UNIT QTY. TOTAL
U/COST COST U/COST COST

DIVISION 1 - GENERAL REQUIREMENTS

1.0 Staff Salaries lot 1.00 -
2.0 Overhead Expenses lot 1.00 -
3.0 Temfacil lot 1.00 -
4.0 Bonds lot 1.00 -
Sub-total - - -
TOTAL - DIVISION 1 - - -
DIVISION 2 - SITE WORKS
1.0 Clearing and grubbing sq.m. - 11.10 - -
2.0 Batterboard Installation l.m. 62.50 - 20.36 - -
3.0 Layouting grid line included
4.0 Soil Poisoning sq.m. - 5.90 - -
a Soil Poison lit 4,017.86 - - -
5.0 Excavation cu.m. - 246.96 - -
6.0 Backfilling & Compaction cu.m. - 177.50 - -
7.0 Disposal cu.m. - 172.43 - -
8.0 General Cleaning & Lot Leveling sq.m. - 41.32 - -
Sub-total - - -
TOTAL - DIVISION 2 - - -
DIVISION 3 - CONCRETE
Wall Concrete Footings
WF
1.0 Gravel Bed Laying cu.m. 840.00 - 73.26 - -
2.0 Reinforcement kgs. 50.00 - 10.00 - -
a Rebars 10 mm dia x 6m (Grade 40) pcs
b GI Tie Wire #16 kgs. 88.00 - -
3.0 Concrete Pouring ( one-bagger ) 3000 Psi cu.m. 711.97 - -
a Portland Cement (40 kg) bags 247.50 - -
b Sand cu.m. 770.00 - -
c Gravel, 3/4" cu.m. 825.00 - -
Sub-total - - -
Footing Tie Beam
1.0 Gravel Bed Laying cu.m. 840.00 - 73.26 - -
2.0 Reinforcement kgs. 50.00 - 10.00 - -
a GI Tie Wire #16 kgs. 88.00 - - -
3.0 Concrete Pouring ( one-bagger ) 3000 Psi cu.m. - - 711.97 - -
a Portland Cement (40 kg) bags 247.50 - - -
b Sand cu.m. 770.00 - - -
c Gravel, 3/4" cu.m. 825.00 - - -
Sub-total - - -
Column Footings
1.0 Gravel Bed Laying cu.m. 840.00 - 73.26 - -
2.0 Reinforcement kgs. 50.00 - 10.00 - -
a Rebars 16 mm dia x 6m (Grade 60) pcs
b GI Tie Wire #16 kgs. 88.00 - - -
3.0 Concrete Pouring ( one-bagger ) 3000 Psi cu.m. - - 711.97 - -
a Portland Cement (40 kg) bags 247.50 - - -
b Sand cu.m. 770.00 - - -
c Gravel, 3/4" cu.m. 825.00 - - -
Sub-total - - -
Suspended Floor Slab
1.0 Reinforcement kgs. 50.00 - 10.00 - -
Rebars 10 mm dia x 6m (Grade 40) pcs
a GI Tie Wire #16 kgs. 88.00 - - -
2.0 Formworks sq.m. 194.62 - 182.09 - -
3.0 Concrete Pouring ( one-bagger ) 3000 Psi cu.m. - 711.97 - -
a Portland Cement (40 kg) bags 247.50 - - -
b Sand cu.m. 770.00 - - -
c Gravel, 3/8" cu.m. 825.00 - - -
4.0 Concrete Floor Finishing (straight to finish) sq.m. - - -
5.0 Plain cement to protect waterproofing sq.m. - 22.51 - -
a Portland cement bags 247.50 - - -
b Sand cu.m. 770.00 - - -
6.0 drip moulds@deck m - - -
7.0 exposed slab soffit sq.m. - - -
a Portland cement bags - - - -
b Sand cu.m. - - - -
Sub-total - - -
Slab on Fill
1.0 Gravel Bed Laying cu.m. 840.00 - 73.26 - -
2.0 Reinforcement kgs. 50.00 - 10.00 - -
Rebars 10 mm dia x 6m (Grade 40)
a GI Tie Wire #16 kgs. 88.00 - - -
3.0 Formworks sq.m. 194.62 - 182.09 - -

Page 1 of 11 03/06/2020
 PROJECT:
OWNER:
LOCATION:

BILL OF QUANTITIES

MATERIALS LABOR
ITEM ITEM DESCRIPTION UNIT QTY. TOTAL
U/COST COST U/COST COST
4.0 Concrete Pouring ( one-bagger ) 3000 Psi cu.m. - 711.97 - -
a Portland Cement (40 kg) bags 247.50 - - -
b Sand cu.m. 770.00 - - -
c Gravel, G-1 cu.m. 825.00 - - -
5.0 Concrete Floor Finishing (straight to finish) sq.m. - - -
Sub-total - - -

Page 2 of 11 03/06/2020
 PROJECT:
OWNER:
LOCATION:

BILL OF QUANTITIES

MATERIALS LABOR
ITEM ITEM DESCRIPTION UNIT QTY. TOTAL
U/COST COST U/COST COST
Beams
1.0 Reinforcement kgs. 50.00 - 10.00 - -
Rebars 10 mm dia x 6m (Grade 40) pcs
Rebars 16 mm dia x 6m (Grade 60) pcs
a GI Tie Wire #16 kgs. 88.00 - - -
2.0 Formworks sq.m. 194.62 - 182.09 - -
3.0 Concrete Pouring ( one-bagger ) 3000 Psi cu.m. - 711.97 - -
a Portland Cement (40 kg) bags 247.50 - - -
b Sand cu.m. 770.00 - - -
c Gravel, 3/4" cu.m. 825.00 - - -
Sub-total - - -
Lintel Beams
1.0 Reinforcement kgs. 39.93 - 5.90 - -
a GI Tie Wire #16 kgs. 88.00 - -
2.0 Formworks sq.m. 194.62 - 171.79 - -
3.0 Concrete Pouring ( one-bagger ) 3000 Psi cu.m. 678.06 - -
a Portland Cement (40 kg) bags 247.50 - -
b Sand cu.m. 770.00 - -
c Gravel, 3/4" cu.m. 825.00 - -
Sub-total - - -
Column
1.0 Reinforcement kgs. 50.00 - 10.00 - -
Rebars 10 mm dia x 6m (Grade 40) pcs
Rebars 16 mm dia x 6m (Grade 60) pcs
a GI Tie Wire #16 kgs. 88.00 - - -
2.0 Formworks sq.m. 194.62 - 182.09 - -
3.0 Concrete Pouring ( one-bagger ) 3000 Psi cu.m. - 711.97 - -
a Portland Cement (40 kg) bags 247.50 - - -
b Sand cu.m. 770.00 - - -
c Gravel, 3/4" cu.m. 825.00 - - -
Sub-total - - -
Stairs
1.0 Reinforcement kgs. 50.00 - 10.00 - -
a GI Tie Wire #16 kgs. 88.00 - - -
2.0 Formworks sq.m. 194.62 - 182.09 - -
3.0 Concrete Pouring ( one-bagger ) 3000 Psi cu.m. - 678.06 - -
a Portland Cement (40 kg) bags 247.50 - - -
b Sand cu.m. 770.00 - - -
c Gravel, 3/4" cu.m. 825.00 - - -
Sub-total - - -
Concrete Ledge
1.0 Reinforcement kgs. -
a GI Tie Wire #16 kgs. - -
2.0 Formworks sq.m. -
included in Suspended Slab
3.0 Concrete Pouring ( one-bagger ) 3000 Psi cu.m. -
a Portland Cement (40 kg) bags - -
b Sand cu.m. - -
c Gravel, 3/4" cu.m. - -
Sub-total - - -
TOTAL - DIVISION 3 - - -
DIVISION 4 - MASONRY
EXTERIOR/INTERIOR CHB Walls
1.0 CHB (6") Laying including Rebars sq.m. - 172.08 - -
a CHB 6" - 400 psi pcs 25.00 - - -
b Portland Cement (40 kg) bags 225.00 - - -
c Rebars 12 mm dia x 6m (Grade 40) pcs 174.07 - - -
d Rebars 10 mm dia x 6m (Grade 40) pcs 120.94 - - -
e Tie wires #16 kgs 88.00 - - -
f Sand cu.m. 650.00 - - -
2.0 Reinforcement to openings kgs - - -
a Rebars 16 mm dia x 6m (Grade 40) pcs - - -
b GI Tie Wire #16 kgs. - - -
3.0 Plastering (16mm thick); Class B sq.m. - 125.15 - -
a Portland Cement (40 kg) bags 225.00 - - -
b Sand cu.m. 650.00 - - -
INTERIOR CHB Walls
1.0 CHB (6") Laying including Rebars sq.m. - 172.08 - -
a CHB 6" - 400 psi pcs 25.00 - - -
b Portland Cement (40 kg) bags 225.00 - - -
c Rebars 12 mm dia x 6m (Grade 40) pcs 174.07 - - -
d Rebars 10 mm dia x 6m (Grade 40) pcs 120.94 - - -
e Tie wires #16 kgs 88.00 - - -
f Sand cu.m. 650.00 - - -
2.0 Reinforcement to openings kgs - - -

Page 3 of 11 03/06/2020
 PROJECT:
OWNER:
LOCATION:

BILL OF QUANTITIES

MATERIALS LABOR
ITEM ITEM DESCRIPTION UNIT QTY. TOTAL
U/COST COST U/COST COST
a Rebars 16 mm dia x 6m (Grade 40) pcs - - -
b GI Tie Wire #16 kgs. - - -
3.0 Plastering (16mm thick); Class B sq.m. - 125.15 - -
a Portland Cement (40 kg) bags 225.00 - - -
b Sand cu.m. 650.00 - - -
Sub-total - - -
Pantry Counter Base & Sink
1.0 Formworks sq.m. 194.62 - 171.79 - -
2.0 Reinforcement kgs 5.90 - -
a Rebars, 10 mm dia x 6m (Grade 40) pcs 134.38 - -
b Tie wires #16 kgs 88.00 - -
3.0 Concrete Slab Base & Counter (Assume 2500psi) cu.m. - -
a Portland Cement (40 kg) bags 247.50 - -
b Sand cu.m. 770.00 - -
c Gravel cu.m. 825.00 - -
4.0 CHB Laying 4" including Rebars sq.m. 162.34 - -
a CHB 4" - 400psi pc 20.13 - -
b Portland Cement (40 kg) bags 247.50 - -
c Rebars 10 mm dia x 6m (Grade 40) pcs 134.38 - -
d Tie wires #16 kgs 88.00 - -
e Sand cu.m. 770.00 - -
5.0 Plastering (16mm thick); Class B sq.m. 228.31 - -
a Portland Cement (40 kg) bags 247.50 - -
b Sand cu.m. 770.00 - -
Sub-total - - -
Toilet Counter
1.0 Formworks sq.m. 194.62 - 171.79 - -
2.0 Reinforcement kgs 5.90 - -
a Rebars, 10 mm dia x 6m (Grade 40) pcs 134.38 - -
b Tie wires #16 kgs 88.00 - -
3.0 Concrete Slab counter (Assume 2500psi) cu.m. - -
a Portland Cement (40 kg) bags 247.50 - -
b Sand cu.m. 770.00 - -
c Gravel cu.m. 825.00 - -
Sub-total - - -
TOTAL - DIVISION 4 - - -

Page 4 of 11 03/06/2020
 PROJECT:
OWNER:
LOCATION:

BILL OF QUANTITIES

MATERIALS LABOR
ITEM ITEM DESCRIPTION UNIT QTY. TOTAL
U/COST COST U/COST COST
DIVISION 5 - METALS
Roofing
a Rib type Long Span lm 1,500.00 - 450.00 - -
b Consumables lot - - -

Structural Steel (Roof Framing)

1.0 Rafters, cleats and runners
a W21 x 50 kgs -
b W16 x 31 kgs -
c W8 x 15 kgs -
d 100x 400x3mm tubular kgs -
e 100x 300x3mm tubular kgs -
f L 75 x 75 x 6mm thick kgs -
i Consumables lot -
2.0 Stiffeners, Gusset Plates, & Plates
a 10mm thick plate kgs -
b Consumables lot -
3.0 Purlins
a C 2" x 4" kg 100.00 - -
b Consumables lot - - -
4.0 Hooks & Tie Bars
a 10mm diameter, sag rods kg -
b 16mm diameter x 400mm long Anchor bolts pcs -
c 10mm diameter x 25mm long machine bolts pcs -
d Standard turnbuckle pcs -
e 25mmthk Non shrink levelling grout m2 -
5.0 Tie Bars
a 12mm diameter kg included included -
Stairs
1.0 Fabrication of Steel Stringer & Treads lot -
a L 100 x 100 x 6mm thick kgs 55.47 - 14.15 - -
b L 38 x 38 x 6mm thick kgs 55.47 - 14.15 - -
c L 50 x 50 x 6mm thick kgs 55.47 - 14.15 - -
d 8mm thick plate kgs 77.97 - 14.15 - -
e 6mm thick plate kgs 77.97 - 14.15 - -
f 16mm diameter x 150mm long A325 bolt pcs 55.00 - 10.84 - -
g 10mm diameter A325 bolt pcs 35.20 - 10.84 - -
h 12mm diameter machine bolt pcs 27.50 - 10.84 - -
i Consumables lot - - -
Column
a. 250x250x6mmthk tubular steel column kgs 91.71 - 14.15 - -
b. 200mmØ GI pipe kgs 55.47 - 14.15 - -
c Consumables lot - - -
Ledge
a. 100x200x3mmthk tubular steel stiffener ledge kgs 91.71 - 14.15 - -
b Consumables lot - - -
Lattice
a. 50mmx50mm tubular steel lattice m2 12,320.00 - included -
Trellis
a. 1/8"x3x6" tubular steel trellis kgs 91.71 - 14.15 - -
b Consumables lot - - -
Railings
1.0 Stainless Steel Railing
50x100mm stainless steel on 25x25mm tubular
a. m 10,411.56 - included -
steel vertical railings; 600mmH
b 50mm stainless steel; 1000mmH ramp railing m 5,791.67 - included -
2.0 Steel Railing @ stair tower
3/8"x2" vertical and 1/2"x2" flat bar railings;
a. m2 5,925.92 - included -
600mmH
3.0 Stainless Steel Railing @ stair to poooldeck
50x100mm stainless steel on 25x25mm tubular
a. m 10,411.56 - included -
steel vertical railings; 600mmH
Sub-total - - -
TOTAL - DIVISION 5 - - -
DIVISION 6 - WOOD & PLASTIC
Carpentry Works
1.0 Beam cladding 1" KD wood m2 - - -
Sub-total - - -
TOTAL - DIVISION 6 - - -
DIVISION 6 - THERMAL & MOISTURE PROTECTION

1.0 Prepainted metal roofing 0.50mm seamless longspan lot 484,780.74 - 168,300.00 - -
including guter and flashing (A=919.81m2)
2.0 Fascia Installation l.m 51.65 - -

Page 5 of 11 03/06/2020
 PROJECT:
OWNER:
LOCATION:

BILL OF QUANTITIES

MATERIALS LABOR
ITEM ITEM DESCRIPTION UNIT QTY. TOTAL
U/COST COST U/COST COST
a Fascia board, 12mm thick x 10" x 8' pc 319.00 - -
b Fascia board, 12mm thick x 12" x 8' pc 357.50 - -
3.0 Waterproofing sq.m 195.00 - included included -
Sub-total - - -
TOTAL - DIVISION 6 - - -
DIVISION 7 - DOORS & WINDOWS
Doors
1.0 D1 pc 33,500.00 - 6,700.00 - -
2.0 D2 pc 23,500.00 - 4,700.00 - -
3.0 D3 pc 2,800.00 - 840.00 - -
4.0 D4 pc 4,000.00 - 1,200.00 - -
5.0 D5 pc 2,100.00 630.00 - -
6.0 Gate lot 30,000.00 - 9,000.00 - -
Sub-total - - -
Ironmongeries
1.0 Cylindrical lockset (surelockset) pc - - -
2.0 Hinges; to doors pc - - -
Sub-total - - -
Windows
1.0 W1 pc 50,375.00 - -
2.0 W2 pc 37,200.00 - -
3.0 W3 pc 23,250.00 - -
4.0 W4 pc 7,750.00 - -
5.0 W5 pc 6,000.00 - -
6.0 W6 pc 10,075.00 - -
7.0 W7 pc 3,900.00 - -
8.0 W8 pc 37,125.00 - -
9.0 W9 pc 37,125.00 - -
Sub-total - - -
TOTAL - DIVISION 7 - - -
DIVISION 8 - FINISHES
Interior Ceiling on metal furring
1.0 Ceiling Frame (light metal frame) sq.m. 467.43 - 93.86 - -
2.0 Ceiling Board Installation (at t&b) sq.m. 122.02 - -
a Moisture Resistant Cement board pc 506.00 - - -
b Consumables lot - - - -
3.0 Ceiling Board Installation - interior sq.m. 115.12 - -
a 12mm thick Gypsum board pc 396.00 - -
b Consumables lot - - -
4.0 Ceiling Board Installation - exterior
a 12mm thick Gypsum board pc 396.00 - -
b Consumables lot - - -
Sub-total - - -
T & B Tileworks
Floor Tiles (300x300 Ceramic Tiles) sq.m. 180.64 - -
a Floor Tiles pc 60.00 - - -
b ABC Tile Grout (2kg/bag) bag 147.84 - - -
c Cement Adhesive (25 kg) bag 348.81 - - -
d Tile Trim m - - -
Wall Tiles (300x300 Ceramic Tiles) sq.m. 180.64 - -
a Wall Tiles pc 60.00 - - -
b ABC Tile Grout (2kg/bag) bag 147.84 - - -
c Cement Adhesive (25 kg) bag 348.81 - - -
d Tile Trim m - - -
Sub-total - - -
Floor Finishes
1.0 Homogeneous ceramic tiles sq.m. 180.64 - -
a Homogeneous Tiles (600x600) pc 200.00 - - -
b ABC Tile Grout (2kg/bag) bag 147.84 - - -
c Cement Adhesive (25 kg) bag 348.81 - - -
2.0 Non-skid Homogenous Tiles sq.m. - 180.64 - -
a Homogeneous Tiles (600x600) pc 200.00 - - - -
b ABC Tile Grout (2kg/bag) bag 147.84 - - - -
c Cement Adhesive (25 kg) bag 348.81 - - - -
Sub-total - - -
Exterior wall

1.0 Façade Treatment sq.m. - - -

Sub-total - - -

Page 6 of 11 03/06/2020
 PROJECT:
OWNER:
LOCATION:

BILL OF QUANTITIES

MATERIALS LABOR
ITEM ITEM DESCRIPTION UNIT QTY. TOTAL
U/COST COST U/COST COST
Painting Works
1.0 Exterior Wall - textured sq.m. 105.10 - -
a Flat Latex gal 600.00 - - -
b Textured Latex gal 700.00 - - -
c Consumables lot - - - -
2.0 Interior Wall sq.m. 105.10 - -
a Flat Latex gal 600.00 - - -
b Semi-gloss Latex gal 700.00 - - -
c Consumables lot - - - -
3.0 Interior Wall sq.m. 73.92 - -
a Flat Latex gal - - -
b Semi-gloss Latex gal - - -
c Consumables lot - - -
3.0 Ceiling sq.m. 105.10 - -
a Flat Latex gal 500.00 - - -
c Consumables lot - - - -
7.0 Doors sq.m. 98.56 - -
a Flat Wall Enamel gal 548.63 - -
b Quick Drying Enamel gal 612.15 - -
c Consumables lot - - -
8.0 Jambs - enamel l.m. 15.40 - -
a Flat Wall Enamel gal 548.63 - -
b Quick Drying Enamel gal 612.15 - -
c Consumables lot - - -
9.0 Pantry Counter Concrete sq.m. 73.92 - -
a Flat Latex gal 473.00 - -
b Semi-gloss Latex gal 544.50 - -
c Consumables lot - - -
10.0 Steel railing/louvers sq.m. 98.56 - -
a Flat Lacquer gal 792.05 - -
b Consumables lot - - -
Sub-total - - -
TOTAL - DIVISION 8 - - -
DIVISION 9 - SPECIALTIES
Mirrors
6mm Mirror with plywood backing and aluminum frame
1.0
in anodized finish
a. 3150mm wide x 900mm high m2
b. 2100mm wide x 900mm high m2
c 2850mm wide x 900mm high m2
Ledge
3.0 Pre-cast Ledge m2
Modular Counter / Cabinetry
4.0 Installation of Kitchen Cabinets m
5.0 Kitchen Counter sq.m.
a 2.4mm china granite countertop and splashboard sq.m.
Metal Louvers
8.0 Tubular metal Louvers sq.m.
Shower Enclosure
8.0 Glass Shower Enclosure lot
Sub-total - - -
TOTAL - DIVISION 9 - - -
DIVISION 10 - SANITARY
lot
A. WATERLINE
PIPES
20mm (1/2") x 4.0 meters pc. / s 295.00 - 88.50 - -
- - -
FITTINGS - PPR - - -
ELBOW - - -
Plain Elbow - - -
20mm pc. / s 24.00 - 7.20 - -
Threaded Elbow - - -
20mm pc. / s 28.00 - 8.40 - -
- - -
ADAPTOR - - -
Male Threaded Adaptor - - -
20mm pc. / s 185.00 - 55.50 - -
Female Threaded Adaptor - - -
20mm pc. / s 185.00 - 55.50 - -
- - -
TEE - - -
Plain Tee - - -
20mm pc. / s 25.00 - 7.50 - -

Page 7 of 11 03/06/2020
 PROJECT:
OWNER:
LOCATION:

BILL OF QUANTITIES

MATERIALS LABOR
ITEM ITEM DESCRIPTION UNIT QTY. TOTAL
U/COST COST U/COST COST
Threaded Tee - - -
20mm pc. / s 30.00 - 9.00 - -
- - -
COUPLING - - -
Coupling - - -
20mm pc. / s 15.00 - 4.50 - -
- - -
CAP - - -
End Cap - - -
20mm pc. / s 15.00 - 4.50 - -
- - -
OTHERS - - -
Hose Bibb pc. / s 284.50 - 85.35 - -
Gate Valve pc. / s 255.00 - 76.50 - -
Check Valve pc. / s 272.50 - 81.75 - -
Shower Valve pc. / s 282.60 - 84.78 - -
Shower Head pc. / s 725.00 - 217.50 - -
Ordinary Faucet pc. / s 300.00 - 90.00 - -
Consumbales (Teflon, Solvent etc.) lot 2,621.60 - - -
- - -
- - -

Page 8 of 11 03/06/2020
 PROJECT:
OWNER:
LOCATION:

BILL OF QUANTITIES

MATERIALS LABOR
ITEM ITEM DESCRIPTION UNIT QTY. TOTAL
U/COST COST U/COST COST
- - -
B. SANITARY AND VENT - - -
- - -
PIPES - - -
63mm x 3.0 meters PVC Pipe pc. / s 420.00 - 126.00 - -
110mm x 3.0 meters PVC Pipe pc. / s 980.00 - 294.00 - -
160mm x3.0 meters PVC Pipe pc. / s 1,125.50 - 337.65 - -
- - -
FITTINGS - - -
1/4 BEND - - -
110mm pc. / s 91.56 - 27.47 - -
160mm pc. / s 456.40 - 136.92 - -
1/8 BEND - - -
63mm pc. / s 42.50 - 12.75 - -
110mm pc. / s 92.15 - 27.65 - -
160mm pc. / s 92.15 - 27.65 - -
TEE - - -
63mm x 63mm pc. / s 43.40 - 13.02 - -
160mm x 160mm pc. / s 667.52 - 200.26 - -
WYE (Single Branch) - - -
63mm x 110mm pc. / s 121.80 - 36.54 - -
110mm x 110mm pc. / s 146.44 - 43.93 - -
110mm x 160mm pc. / s 1,193.36 - 358.01 - -
FLOOR CLEAN OUT - - -
110mm pc. / s 175.25 - 52.58 - -
160mm pc. / s 217.36 - 65.21 - -
P-TRAP - - -
63mm pc. / s 373.56 - 112.07 - -
Consumables lot 6,238.95 - - -
- - -
- - -
C. STORM DRAINAGE - - -
- - -
PIPES - - -
160mm x 3.0 meters PVC Pipe pc. / s 1,125.50 - 337.65 - -
Downspout 110mm pc. / s 367.64 - 110.29 - -
- - -
FITTINGS - - -
1/4 BEND - - -
160mm pc. / s 456.40 - 136.92 - -
COUPLING - - -
160mm pc. / s 410.76 - 123.23 - -
110mm pc. / s 287.53 - 86.26 - -
- - -
OTHERS - - -
Catch Basin pc. / s 3,930.40 - 1,965.20 - -
Consumbales lot 2,647.83 - - -
- - -
D. PLUMBING FIXTURES - - -
- - -
Supply and Installation of: - - -
- - -
Water Closet set / s 8,550.00 - 2,565.00 - -
- - -
Lavatory set / s 5,725.00 - 1,717.50 - -
- - -
Lavatory Faucet set / s 625.00 - 187.50 - -
- - -
Kitchen Sink set / s 3,450.00 - 1,035.00 - -
- - -
Kitchen Sink Faucet set / s 1,850.00 - 555.00 - -
- -
Shower enclosure sets 10,000.00 - -
- - -
MISCELLANEOUS - - -
- - -
4" X 4" Stainless Strainer for Floor Drain pc. / s 350.00 - 105.00 - -
- - -
Stainless Grease Trap for Kitchen Sink pc. / s 3,750.00 - 1,125.00 - -
- - -
E. SEPTIC TANK - - -
- - -
EARTHWORKS - - -
Excavation m3 - 340.26 - -

Page 9 of 11 03/06/2020
 PROJECT:
OWNER:
LOCATION:

BILL OF QUANTITIES

MATERIALS LABOR
ITEM ITEM DESCRIPTION UNIT QTY. TOTAL
U/COST COST U/COST COST
Backfill m3 - 178.83 - -
Hauling and Disposal m3 - 545.45 - -
Gravel Bedding m3 950.00 - 168.83 - -
- - -
- - -
- - -
CONCRETE WORKS - - -
Formworks m2 584.82 - 519.48 - -
1/2" ordinary plywood and rough lumber - - -
Rebars kgs 58.44 - 15.58 - -
12mm dia. Deformed bar - - -
Pouring of Concrete m3 4,935.00 - 1,376.62 - -
3000 psi - - -
- - -
MASONRY WORKS - - -
4" CHB Layout m2 649.35 - 358.44 - -
including mortar and 10mm rebar - - -
Plastering m2 324.68 - 298.70 - -
one side - inside surface only

Sub-total - - -
TOTAL - DIVISION 10 - - -
DIVISION 11 - ELECTRICAL

WIRING METHODS
Conductors and Cables - - -
- - -
Main and Sub main Distribution - - -
THHN, 30sq mm m 217.60 - 62.14 - -
THHN, 14sq mm (G) m 102.00 - 62.14 - -
- - -
Lighting & Small Power Cables - - -
THHN, 2.0sq mm m 17.00 - 36.40 - -
THHN, 3.5sq mm m 25.50 - 36.40 - -
THWN, 2.0sq mm (G) m 17.00 - 36.40 - -
THWN, 3.5sq mm (G) m 25.50 - 36.40 - -
- - -
- - -
Raceways - - -
- - -
PVC, 25mm dia lght 97.20 - 72.00 - -
PVC, 25 Adapter w/ Locknut nr 8.00 - 5.00 - -
RSC, 32mm dia lght 1,187.31 - 159.00 - -
RSC, 32mm Elbow nr 185.00 - 90.00 - -
Octagonal Box nr 35.00 - 31.92 - -
Utility Box nr 35.00 - 31.92 - -
- - -
Wiring Devices - - -
- - -
1 gang switch, Panasonic/ National set 280.00 - 127.68 - -
2 gang switch, Panasonic/National set 310.00 - 127.68 - -
3 gang switch, Panasonic/National set 350.00 - 127.68 - -
Duplex Convenience Outlet, Panasonic/National set 270.00 - 127.68 - -
Range Outlet set 2,500.00 - 127.68 - -
REF Outlet set 270.00 - 127.68 - -
ACU Outlet set 330.00 - 127.68 - -
- - -
- - -
- - -
Panelboards - - -
Main: 100AT, 125AF, 2P set 15,000.00 - 1,500.00 - -

Page 10 of 11 03/06/2020
 PROJECT:
OWNER:
LOCATION:

BILL OF QUANTITIES

MATERIALS LABOR
ITEM ITEM DESCRIPTION UNIT QTY. TOTAL
U/COST COST U/COST COST
Branches: 7- 15AT, 100AF, 2P - - -
10-20AT, 100AF, 2P - - -
4-30AT, 100AF, 2P - - -
Nema 1 - - -
- - -
KWHR Meter (by Meralco) set 3,500.00 - 1,500.00 - -
- - -
LIGHTING SUM - - -
Incandescent Bulb/ as per owner specs set 750.00 - 220.00 - -
Pinlight, 4" Horizontal Downlight 1xE27 with Center set 519.00 - 220.00 - -
Moisture/Dust Proof Fluorescent Lamp (Garage) set 1,500.00 - 220.00 - -
- - -
- - -

Sub-total - - -
TOTAL - DIVISION 11 - - -

GRAND TOTAL - - -

Page 11 of 11 03/06/2020