We love that you are rocking JLab Audio!

We take pride in our products and fully stand behind them.

SFACTI
TI YOUR SATISFACTION IS GUARANTEED
30

ON
SA
DAY
You may exchange or return merchandise within 30 days of the purchase date.
U
ARAN T E Learn more at jlabaudio.com/guarantee

E
G

ED
TWO
YOUR WARRANTY
LIMIT

YE
AR
You may register your product at jlabaudio.com/register. All warranty claims are subject to JLab Audio
authorization and at our sole discretion. Retain your proof of purchase to ensure warranty coverage.

.S.
BASE
CONTACT US
EARBUDS
JBUDS AIR

D
RT

Reach out to us at [email protected] or visit jlabaudio.com/contact

C UST

PO

O
ME
R SU
P

FIRST TIME SETUP: BLUETOOTH PAIRING

AUTO-CONNECTING EARBUDS CONNECTING TO BLUETOOTH
1 Press and hold 3+ seconds on both buttons. 2 Once earbuds pair, the right earbud will flash blue and white
White lights will flash to indicate earbuds indicating the earbuds are ready to pair to your Bluetooth device.
are automatically pairing to each other. Left earbud will be solid white.

Settings

Bluetooth

CONNECTING TO BLUETOOTH
3 Select “JLab JBuds Air” in your device settings. Voice prompt “Bluetooth connected” followed by solid white lights
will indicate you are connected. You will now be ready to use your JBuds Air.

Settings

Bluetooth

JLab JBuds Air

PAIRING NEW / ADDITIONAL BLUETOOTH DEVICES:

When earbuds are powered off, press and hold Right Earbud button 10+ seconds. The earbud will flash blue and white
indicating it is ready to pair to your Bluetooth device. Once connected, turn on Left Earbud to auto connect both earbuds.

ACCESSORIES

3 GEL TIP 2 CUSH USB CABLE CHARGING

SIZES FINS™ CASE
BUTTON FUNCTIONS VOICE PROMPTS
“Hello”: Power ON
“Earbuds joined”:
Earbuds paired to each other
LEFT RIGHT “Ready to Pair”: JBuds Air are
EARBUD EARBUD ready to pair to Bluetooth device
“Bluetooth Connected”:
Earbud is connected to device
“Battery Full”: 100-75%
TURN ON / OFF: TURN ON / OFF: “Battery Medium”: 75-25%
Press & hold 5+ seconds. Press & hold 5+ seconds.
“Low Battery”: Less than 25%
VOLUME DOWN: 1 click. VOLUME UP: 1 click. When power decreases to 10%,
PLAY / PAUSE: 2 clicks. ANSWER: 1 click. HANGUP: 2 clicks. “Low Battery” will play
TRACK BACK: REJECT INCOMING CALLS: “Goodbye”: Power OFF
Press & hold 1+ second. Press & hold 1+ second.
SIRI (iOS) or “OK GOOGLE” (ANDROID):
2 clicks.
TRACK FORWARD:
Press & hold 1+ seconds.

EQUALIZER MODES
Click either the right or left earbud 3 times for different EQ settings (JBuds Air will cycle 3 EQ settings).

JLab SIGNATURE BALANCED BASS BOOST

JLab C3™ signature Even sound with Amplified bass
sound with amplified no additional and sub-bass
bass and vocals enhancements

CHARGING EARBUDS
The left and right earbud need to
match the corresponding L and R Removing the earbuds from the case will turn on
letters on the charging case for and auto connect to your device for next use.
proper charging and connection.

Placing the earbuds in the case will

auto power off the earbuds and
start charging.

Solid blue lights on the earbuds

will indicate charging and will turn
off after earbuds are fully charged.
LEFT RIGHT
Case will show blinking blue lights EARBUD EARBUD
while charging.

CHARGING CASE
Connect the JBuds Air to computer
or USB 5V output device.

LEDs pulse white when charging and

turn solid white when fully charged. OR
FITTING
Try the optional Cush Fins and all Hold the earbud Twist in the ear
ear tips for best fit and proper seal. 1 vertical to the ear. 2 canal to lock in.

CUSH FIN

EAR TIP

TROUBLESHOOTING
CAN YOU HEAR MUSIC FROM THE RIGHT EARBUD BUT NOT THE LEFT?
CONNECT/RECONNECT THE LEFT AND RIGHT EARBUDS
If the right earbud is working but no sound is coming out of the left, follow these steps to pair the two earbuds together.

Turn Bluetooth off on your When earbuds are off, press and
1 device.
2 hold 15+ seconds on the RIGHT
earbud button.
Turn both earbuds off (by Settings

pressing and holding each Bluetooth

While holding, earbud will flash
earbud button until voice blue and white.
prompt says ‘good bye’
or you see no lights). Release when earbud flashes white.

Repeat process with Turn your device Bluetooth

3 LEFT earbud: Press and 4 back on.
hold 15+ seconds on
earbud button. Select “JLab JBuds Air” Settings
to connect.
Release when earbud is Bluetooth

solid white. Once earbuds

connect, the right earbud JLab JBuds Air
will flash blue and white
indicating it is ready to
connect to Bluetooth.

Left earbud will be

solid white.

Note: To avoid having to reconnect the earbuds again, make sure you return the earbuds to the correct spot in the case.
See Charging Earbuds.

ECHOES ON CALLS
If you experience microphone echo/call quality with the JBuds Air, make sure the Cush Fin is not blocking the microphone port.

Microphone covered Microphone open

QUICK TIPS WARNING
• The Bluetooth connection is established from the right earbud. Fully dry off the earbuds before
For most stable connection, keep the device near right hand side putting in the charging case to
or in right pocket. avoid any damage to the case.

• When receiving/taking calls, only the right earbud will accept and The earbuds are sweat/water
play from your mobile device. The left earbud will mute during calls resistant but the case is not.
and continue playback after call ends.

• If you prefer to wear only one earbud, you must wear the right earbud.

WARM-UP YOUR HEADPHONES

Optional: Burn-in is the process for exercising new audio equipment. We recommend 40 hours of burn-in time for most headphones to reach
optimal performance. The main purpose of the process is to loosen the diaphragm of a newly crafted headphone and to stress the headphone
driver. Normal, everyday use can also burn-in the headphones though JLab’s proprietary burn-in provides an ideal mix of sounds and
frequency sweeps to achieve this.
Burn-in your audio equipment with the JLab Audio app available on the App Store and Google Play.
Or access the burn-in method at: jlabaudio.com/burnin

CAUTIONS
• Avoid extreme heat, cold, and humidity. • If you experience discomfort or pain, try lowering the volume
• Avoid dropping or crushing the earbuds. or discontinuing use temporarily.

• Wax may build up in the earbud tips, lowering the sound quality. • If you experience regular discomfort while using this product,
Carefully remove the wax with a cotton swab or other small tool to discontinue use and consult your physician.
improve the sound quality. • We recommend you treat your earbuds as you would a nice pair
of sunglasses and keep them in safe location when not in use.

JLABAUDIO.COM