Scribd
Upload
311 views3 pages

Wideband DTV UHF Antenna TV Amplifier

This document provides instructions for building a wideband UHF antenna amplifier for digital TV signals between 400-850 MHz. It uses a 2SC3358 transistor with a gain of 10-15 dB. The amplifier must be enclosed in a metal box and placed close to the TV antenna. It connects to a 12V power supply and TV set via coaxial cables. Adjustment involves setting the potentiometer P1 to the middle and adjusting for best image quality. It includes a circuit diagram and part list for the amplifier.

Uploaded by

Raymond Kandall
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
311 views3 pages

Wideband DTV UHF Antenna TV Amplifier

This document provides instructions for building a wideband UHF antenna amplifier for digital TV signals between 400-850 MHz. It uses a 2SC3358 transistor with a gain of 10-15 dB. The amplifier must be enclosed in a metal box and placed close to the TV antenna. It connects to a 12V power supply and TV set via coaxial cables. Adjustment involves setting the potentiometer P1 to the middle and adjusting for best image quality. It includes a circuit diagram and part list for the amplifier.

Uploaded by

Raymond Kandall
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 3

Wideband DTV UHF Antenna TV Amplifier

This HD TV UHF wideband amplifier(Ultra High Frequency amplifier) has a total gain
of 10 to 15 dB in the 400 – 850 MHz domain frequency so it can be used where the tv
signal is weak. For this UHF antenna tv amplifier to work correctly you need to cut
the components pins as short as possible. C1, C2, C6, C7 are SMD type ( surface
mounted ). This antenna tv amplifier or uhf wideband amplifier need to be build
inside of a metal box and then connected close to the tv antenna.

Antenna HD TV UHF band amplifier circuit schematic

PCB layout for Wideband HD TV UHF Antenna TV Amplifier Circuit using transistor
2sc3358

uhf antenna amplifier pcb layout Wideband DTV UHF Antenna TV Amplifier Circuit
using transistor 2sc3358 Antenna amplifier for digital tv banddtv antenna amplifier
parts placement 2sc3358 Wideband DTV UHF Antenna TV Amplifier Circuit using
transistor 2sc3358 Antenna amplifier for digital tv band

The power supply is a simple 12V stabilized source. The antenna tv amplifier can be
connected directly to the power supply thru coaxial cable of the tv antenna but you
need a 10 – 100uH coil on the alimentation line. The tv set will be connected to the
uhf amplifier thru a small coupling capacitor.
Adjusting is easy, just bring the P1 to the middle and then adjust it untill you obtain
the best tv image quality.
Digital Tv antenna UHF amplifier components:

T1 -Transistor 2sc3358
C1 – 10µF/35v
C2,C9 – 1nF
C3 ,C4 – 10nF
C5,c6,c7,c8 – 10pF
R1 – 470 Ohms
R2 – 2.2 K
R3 – 1Kohms
P1 – 5Kohms
L1,L2 – 2 turns 22AWG / 0.5mm , 3mm Ø.
L3,L4 – 10uH or 10 turns, 0.2mm Ø on ferrite..
12 volts special power supply.

Users electronic tags:


2SC3358, Build TV antenna booster, scematic rf tv uhf, schematic diagram rf
amplifier uhf, transistor antener circuit for tv, UHF tv filter

You might also like