Repeater specifications

1. GSM Optical Fiber Repeater GZF900-III (43dBm)

Specification:
Specification
Item
Uplink Downlink

Frequency range* 890~915MHz 935~960MHz

Maximum output power -5dBm±2dB 43dBm±2dB
Gain ≥58dB ≥63dB
Max input power -40dBm 3dBm
Gain adjustment range ≥30dB
Gain adjustment step 1dB
≤±1.0dB within 0-20dB
Gain adjustment error
≤±1.5dB within 20-30dB
Ripple in band ≤3dB
Noise Figure ≤4dB
VSWR ≤1.4
Group Delay ≤5μsec
Spurious 9 KHz ~ 1 GHz ≤ -36 dBm/100KHz
Emission 1 GHz ~ 12.75 GHz ≤ -30 dBm/1 MHz
Inter-modulation ≤-50dBc/3kHz
Built-In Power Supply* AC220V±15%, -48V±10%
Door, Temperature, Power Supply, Output Power, etc
Monitoring and alarming* This function need extra GSM terminal per equipment for remote NMS
monitoring
Input/output impedance 50Ω
Operating temperature -25 ~ +55℃
Relative humidity 5%~95%
Connector N type(Female)
Optical wavelength 1.31um or 1.55um
Optical Connector FC/APC
Transmission distances (Max.) 15km

*Note: The star shows this item shall be customized.

 2. GSM Optical Fiber Repeater GZF900-III (40/37/33dBm)

Specification:
Specification
Item
Uplink Downlink
Frequency range* 890~915MHz 935~960MHz
Maximum output power -5dBm±2dB 40/37/33dBm±2dB
≥58dB(40/37dBm) ≥63dB(40/37dBm)
Gain
≥53dB(33dBm) ≥53dB(33dBm)
Gain adjustment range ≥30dB
Gain adjustment step 1dB
≤±1.0dB within 0-20dB
Gain adjustment error
≤±1.5dB within 20-30dB
Ripple in band ≤3dB
Noise Figure ≤4dB
VSWR ≤1.4
Group Delay ≤5μsec
Spurious 9 KHz ~ 1 GHz ≤ -36 dBm/100KHz
Emission 1 GHz ~ 12.75 GHz ≤ -30 dBm/1 MHz
Inter-modulation ≤-50dBc/3kHz
Built-In Power Supply* AC220V±15%, -48V±10%
Door, Temperature, Power Supply, Output Power, etc
Monitoring and alarming* This function need extra GSM terminal per equipment
for remote NMS monitoring
Input/output impedance 50Ω
Operating temperature -25 ~ +55℃
Relative humidity 5%~95%
Connector N type(Female)
Optical wavelength 1.31um or 1.55um
Optical Connector FC/APC
Transmission distances (Max.) 15km

*Note: The star shows this item shall be customized.

 3. GSM Optical Fiber Repeater GZF900-IV (43/40/37/33dBm)

Specification:
Specification
Item
Uplink Downlink

Frequency range* 890~915MHz 935~960MHz

Maximum output power -5dBm±2dB 43/40/37/33dBm±2dB
≥58 (40/37dBm) ≥63dB(40/37dBm)
Gain
≥53dB(33dBm) ≥53dB(33dBm)
Gain adjustment range ≥30dB
Gain adjustment step 1dB
≤±1.0dB within 0-20dB
Gain adjustment error
≤±1.5dB within 20-30dB
Ripple in band ≤3dB
Noise Figure ≤4dB
VSWR ≤1.4
Group Delay ≤5μsec
Spurious 9 KHz ~ 1 GHz ≤ -36 dBm/100KHz
Emission 1 GHz ~ 12.75 GHz ≤ -30 dBm/1 MHz
Inter-modulation ≤-50dBc/3kHz
Built-In Power Supply* AC220V±15%, -48V±10%
Door, Temperature, Power Supply, Output Power, etc
Monitoring and alarming* This function need extra GSM terminal per equipment
for remote NMS monitoring
Input/output impedance 50Ω
Operating temperature -25 ~ +55℃
Relative humidity 5%~95%
Connector N type(Female)
Optical wavelength 1.31um or 1.55um
Optical Connector FC/APC
Transmission distances (Max.) 15km

*Note: The star shows this item shall be customized.

 4. GSM Wireless Access High Power Repeater GZF900-V
(33dBm band selective)

Specification:
Specification
Item
Uplink Downlink

Frequency range* 890~915MHz 935~960MHz

Maximum output power 23dBm±2dB 33dBm±2dB
Gain ≥80dB
ALC(Auto Level Control) Within 2dB or shut off
Gain adjustment range ≥30dB
Gain adjustment step ≤2dB
≤±1.0dB within 0-20dB
Gain adjustment error
≤±1.5dB within 20-30dB
≥0.4MHz ≥15dB
Out-band ≥0.6MHz ≥35dB
suppression ≥1MHz ≥45dB
≥5MHz ≥50dB
Ripple in band ≤3dB
Noise Figure ≤4dB
VSWR ≤1.4
Group Delay ≤5.0 μsec
Spurious 9 KHz ~ 1 GHz ≤ -36 dBm/100 KHz
Emission 1 GHz ~ 12.75 GHz ≤ -30 dBm/1 MHz
In-band ≤-50dBc/3kHz
Inter-modulation 9 KHz ~ 1 GHz ≤ -36 dBm/100 KHz
Out- band
1 GHz ~ 12.75GHz ≤ -30 dBm/1 MHz
Built-In Power Supply AC220V±15%, -48V±10%
Door, Temperature, Power Supply, Output Power, etc
Monitoring and alarming* This function need extra GSM terminal per equipment
for remote NMS monitoring
Input/output impedance 50Ω
Operating temperature -25 ~ +55℃
Relative humidity 5%~95%
Connector N type(Female)

*Note: The star shows this item shall be customized. The frequency range shall be adjustable if required.
 5. GSM Wireless Access High Power Repeater GZF900-V
(43/37dBm band selective)

Specification:
Specification
Item
Uplink Downlink

Frequency range* 890~915MHz 935~960MHz

Maximum output power 33/30dBm±2dB 43/37dBm±2dB
Gain ≥85dB
ALC(Auto Level Control) Within 2dB or shut off
Gain adjustment range ≥30dB
Gain adjustment step ≤2dB
≤±1.0dB within 0-20dB
Gain adjustment error
≤±1.5dB within 20-30dB
≥0.4MHz ≥15dB
Out-band ≥0.6MHz ≥35dB
suppression ≥1MHz ≥45dB
≥5MHz ≥50dB
Ripple in band ≤3dB
Noise Figure ≤4dB
VSWR ≤1.4
Group Delay ≤5.0 μsec
Spurious 9 KHz ~ 1 GHz ≤ -36 dBm/100 KHz
Emission 1 GHz ~ 12.75 GHz ≤ -30 dBm/1 MHz
In-band ≤-50dBc/3kHz
Inter-modulation 9 KHz ~ 1 GHz ≤ -36 dBm/100 KHz
Out-band
1 GHz ~ 12.75 GHz ≤ -30 dBm/1 MHz
Built-In Power Supply* AC220V±15%, -48V±10%
Door, Temperature, Power Supply, Output Power, etc
Monitoring and alarming* This function need extra GSM terminal per equipment
for remote NMS monitoring
Input/output impedance 50Ω
Operating temperature -25 ~ +55℃
Relative humidity 5%~95%
Connector N type(Female)
*Note: The star shows this item shall be customized. The frequency range shall be adjustable if required.
 6. GSM Wireless Access High Power Repeater GZF900-V
(33dBm Downlink channel selective)

Specification:
Specification
Item
Uplink Downlink

Frequency range* 890~915MHz 935~960MHz

Maximum output power 23dBm±2dB 33dBm±2dB
Gain ≥80dB
Channel selective range - 2/4/6/8
ALC(Auto Level Control) Within 2dB or shut off
Gain adjustment range ≥30dB
Gain adjustment step ≤2dB
≤±1.0dB within 0-20dB
Gain adjustment error
≤±1.5dB within 20-30dB
≥0.4MHz ≥15dB -
Band ≥0.6MHz ≥35dB -
Out- band selective ≥1MHz ≥45dB -
suppression ≥5MHz ≥50dB -
Channel F0±400KHZ - ≤-40dBC
selective F0±600KHZ - ≤-45dBC
Ripple in band ≤3dB -
Noise Figure ≤4dB
VSWR ≤1.4
Group Delay ≤5μsec
Spurious 9 KHz ~ 1GHz ≤ -36 dBm/100 KHz
Emission
1 GHz ~ 12.75GHz ≤ -30 dBm/1 MHz
In-band ≤-50dBc/3kHz
Inter-modulation 9 KHz ~ 1 GHz ≤ -36 dBm/100 KHz
Out-band
1 GHz ~ 12.75GHz ≤ -30 dBm/1 MHz
Built-In Power Supply* AC220V±15%, -48V±10%
Door, Temperature, Power Supply, Output Power,
Monitoring and alarming* etc. This function need extra GSM terminal per
equipment for remote NMS monitoring
Input/output impedance 50Ω
Operating temperature -25 ~ +55℃
Relative humidity 5%~95%
Connector N type(Female)

*Note: The star shows this item shall be customized.

 7. GSM Wireless Access High Power Repeater GZF900-V
(43/37 dBm Downlink channel selective)

Specification:
Specification
Item
Uplink Downlink

Frequency range* 890~915MHz 935~960MHz

Maximum output power 33/30dBm±2dB 43/37dBm±2dB
Gain ≥90dB
Channel selective range - 2/4/6/8
ALC(Auto Level Control) Within 2dB or shut off
Gain adjustment range ≥30dB
Gain adjustment step ≤2dB
≤±1.0dB within 0-20dB
Gain adjustment error
≤±1.5dB within 20-30dB
≥0.4MHz ≥15dB -
Uplink Band ≥0.6MHz ≥35dB -
Out-band selective ≥1MHz ≥45dB -
supperssion ≥5MHz ≥50dB -
Downlink Channel F0±400KHZ - ≤-40dBC
selective F0±600KHZ - ≤-45dBC
Ripple in band ≤3dB -
Noise Figure ≤4dB
VSWR ≤1.4
Group Delay ≤5μsec
9 KHz ~ 1 GHz ≤ -36 dBm/100 KHz
Spurious
Emission
1 GHz ~ 12.75 GHz ≤ -30 dBm/1 MHz

In-band ≤-50dBc/3kHz
Inter-modulation 9 KHz ~ 1 GHz ≤ -36 dBm/100 KHz
Out-band
1 GHz ~ 12.75GHz ≤ -30 dBm/1 MHz
Built-In Power Supply* AC220V±15%, -48V±10%
Door, Temperature, Power Supply, Output Power, etc
Monitoring and alarming* This function need extra GSM terminal per equipment
for remote NMS monitoring
Input/output impedance 50Ω
Operating temperature -25 ~ +55℃
Relative humidity 5%~95%
Connector N type(Female)
*Note: The star shows this item shall be customized.
 8. GSM Wireless Access High Power Repeater GZF900-V
(33dBm Downlink/Uplink channel selective)

Specification:
Specification
Item
Uplink Downlink

Frequency range* 890~915MHz 935~960MHz

Maximum output power 23dBm±2dB 33dBm±2dB
Gain ≥80dB
Channel selective range 2/4/6/8
ALC(Auto Level Control) Within 2dB or shut off
Gain adjustment range ≥30dB
Gain adjustment step ≤2dB
≤±1.0dB within 0-20dB
Gain adjustment error
≤±1.5dB within 20-30dB
Out-band F0±400KHZ ≤-40dBC
suppression F0±600KHZ ≤-45dBC
Noise Figure ≤4dB
VSWR ≤1.4
Group Delay ≤5μsec
Spurious 9KHz ~ 1GHz ≤ -36 dBm/100 KHz
Emission 1GHz ~ 12.75GHz ≤ -30 dBm/1 MHz
In-band ≤-50dBc/3kHz
Inter-modulation 9KHz ~ 1GHz ≤ -36 dBm/100 KHz
Out-band
1GHz ~ 12.75GHz ≤ -30 dBm/1 MHz
Built-In Power Supply* AC220V±15%, -48V±10%
Door, Temperature, Power Supply, Output
Power, etc. This function need extra GSM
Monitoring and alarming*
terminal per equipment for remote NMS
monitoring
Input/output impedance 50Ω
Operating temperature -25 ~ +55℃
Relative humidity 5%~95%
Connector N type(Female)

*Note: The star shows this item shall be customized.

 9. GSM Wireless Access High Power Repeater GZF900-V
(43/37 dBm Downlink/Uplink channel selective)

Specification
Specification
Item
Uplink Downlink

Frequency range* 890~915MHz 935~960MHz

Maximum output power 33/30dBm±2dB 43/37dBm±2dB
Gain ≥90dB
Channel selective range 2/4/6/8
ALC(Auto Level Control) Within 2dB or shut off
Gain adjustment range ≥30dB
Gain adjustment step ≤2dB
≤±1.0dB within 0-20dB
Gain adjustment error
≤±1.5dB within 20-30dB
Out-band F0±400KHZ ≤-40dBC
suppression F0±600KHZ ≤-45dBC
Noise Figure ≤4dB
VSWR ≤1.4
Group Delay ≤5μsec
Spurious 9 KHz ~ 1 GHz ≤ -36 dBm/100 KHz
Emission 1GHz ~ 12.75GHz ≤ -30 dBm/1 MHz
In-band ≤-50dBc/3kHz
Inter-modulation 9 KHz ~ 1 GHz ≤ -36 dBm/100 KHz
Out-band
1GHz ~ 12.75GHz ≤ -30 dBm/1 MHz
Built-In Power Supply* AC220V±15%, -48V±10%
Door, Temperature, Power Supply, Output Power, etc
Monitoring and alarming* This function need extra GSM terminal per equipment
for remote NMS monitoring
Input/output impedance 50Ω
Operating temperature -25 ~ +55℃
Relative humidity 5%~95%
Connector N type(Female)

*Note: The star shows this item shall be customized.

 10. GSM Solar Power Repeater GZF900-VP (33/37dBm band selective)

Specification
Specification
Item
Uplink Downlink

Frequency range* 890~915MHz 935~960MHz

Maximum output power 30/23dBm±2dB 37/33dBm±2dB
Gain ≥80dB
ALC(Auto Level Control) Within 2dB or shut off
Gain adjustment range ≥30dB
Gain adjustment step ≤2dB
≤±1.0dB within 0-20dB
Gain adjustment error
≤±1.5dB within 20-30dB
≥0.4MHz ≥15dB
Out-band ≥0.6MHz ≥35dB
suppression ≥1MHz ≥45dB
≥5MHz ≥50dB
Ripple in-band ≤3dB
Noise Figure ≤4dB
VSWR ≤1.4
Group Delay ≤5.0μsec
Spurious 9 KHz ~ 1 GHz ≤ -36 dBm/100 KHz
Emission 1 GHz ~ 12.75 GHz ≤ -30 dBm/1 MHz
Inter-modulation ≤-36dBc/30KHz
Built-In Power Supply* Solar battery support
Working time in rainy days 4-5 days
Power consumption 60W(37dBm)； 45W(33dBm)
Door, Temperature, Power Supply, Output Power, etc
Monitoring and alarming* This function need extra GSM terminal per equipment for remote NMS
monitoring
Input/output impedance 50Ω
Operating temperature -25 ~ +55℃
Relative humidity 5%~95%
Connector N type(Female)

*Note: The star shows this item shall be customized. The frequency range shall be adjustable
if required
 11. GSM Solar Power Repeater GZF900-VP
(37/33dBm Downlink/Uplink channel selective)

Specification:
Specification
Item
Uplink Downlink

Frequency range* 890~915MHz 935~960MHz

Maximum output power 30/23dBm±2dB 37/33dBm±2dB
Gain ≥80dB ≥80dB
Channel selective range 2/4
ALC(Auto Level Control) Within 2dB or shut off
Gain adjustment range ≥30dB
Gain adjustment step ≤2dB
≤±1.0dB within 0-20dB
Gain adjustment error
≤±1.5dB within 20-30dB
Out-band F0±400KHZ ≤-40dBC
suppression F0±600KHZ ≤-45dBC
Noise Figure ≤4dB
VSWR ≤1.4
Group Delay ≤5μsec
Spurious 9 KHz ~ 1 GHz ≤ -36 dBm/100 KHz
Emission 1 GHz ~ 12.75 GHz ≤ -30 dBm/1 MHz
In-band ≤-36dBc/30KHz
Inter-modulation 9 KHz ~ 1 GHz ≤ -36 dBm/100 KHz
Out-band
1 GHz ~ 12.75GHz ≤ -30 dBm/1 MHz
Built-In Power Supply* Solar battery support
Working time in rainy days 4-5 days
Power consumption 60W(37dBm)；45W (33dBm)
Door, Temperature, Power Supply, Output Power, etc
Monitoring and alarming* This function need extra GSM terminal per equipment for remote
NMS monitoring
Input/output impedance 50Ω
Operating temperature -25 ~ +55℃
Relative humidity 5%~95%
Connector N type(Female)
*Note: The star shows this item shall be customized.
 12. GSM Wireless Access Low power Repeater GZF900-VIF-II
(27dBm band selective)

Specification:
Specification
Item
Uplink Downlink

Frequency range* 890~915MHz 935~960MHz

Maximum output power 20dBm±2dB 27dBm±2dB
Gain ≥75dB
ALC(Auto Level Control) Within 2dB or shut off
Gain adjustment range ≥30dB
Gain adjustment step ≤2dB
≤±1.0dB within 0-20dB
Gain adjustment error
≤±1.5dB within 20-30dB
≥0.4MHz ≥15dB
Out-band ≥0.6MHz ≥35dB
suppression ≥1MHz ≥45dB
≥5MHz ≥50dB
Ripple in-band ≤3dB
Noise Figure ≤6dB
VSWR ≤1.4
Group Delay ≤5.0μsec

Spurious 9 KHz ~ 1 GHz ≤ -36 dBm/100 KHz

Emission
1 GHz ~ 12.75 GHz ≤ -30 dBm/1 MHz
In-band ≤-50dBc/3kHz
Inter-modulation 9 KHz ~ 1 GHz ≤ -36 dBm/100 KHz
Out-band
1 GHz ~ 12.75 GHz ≤ -30 dBm/1 MHz
Built-In Power Supply* AC220V±15%, -48V±10%
Door, Temperature, Power Supply, Output Power, etc
Monitoring and alarming* This function need extra GSM terminal per equipment
for remote NMS monitoring
Input/output impedance 50Ω
Operating temperature -25 ~ +55℃
Relative humidity 5%~95%
Connector N type(Female)
*Note: The star shows this item shall be customized. The frequency range shall be adjustable if required
 13. GSM Wireless Access Low power Repeater GZF900-VIF-II
(27dBm Downlink/Uplink channel selective)

Specification:
Specification
Item
Uplink Downlink

Frequency range* 890~915MHz 935~960MHz

Maximum output power 20dBm±2dB
Gain ≥75dB
Channel selective range 2/4/6/8
ALC(Auto Level Control) Within 2dB or shut off
Gain adjustment range ≥30dB
Gain adjustment step ≤2dB
≤±1.0dB within 0-20dB
Gain adjustment error
≤±1.5dB within 20-30dB
Out-band F0±400KHZ ≤-40dBC
suppression F0±600KHZ ≤-45dBC
Noise Figure ≤6dB
VSWR ≤1.4
Group Delay ≤5μsec
Spurious 9 KHz ~ 1 GHz ≤ -36 dBm/100 KHz
Emission 1 GHz ~ 12.75 GHz ≤ -30 dBm/1 MHz
In-band ≤-50dBc/3kHz
Inter-modulation 9 KHz ~ 1 GHz ≤ -36 dBm/100 KHz
Out- band
1 GHz ~ 12.75 GHz ≤ -30 dBm/1 MHz
Built-In Power Supply* AC220V±15%, -48V±10%
Door, Temperature, Power Supply, Output Power, etc
Monitoring and alarming* This function need extra GSM terminal per equipment
for remote NMS monitoring
Input/output impedance 50Ω
Operating temperature -25 ~ +55℃
Relative humidity 5%~95%
Connector N type(Female)

*Note: The star shows this item shall be customized.

14. GSM Wireless Access Low power Repeater GZF900-VIF-III (23/20/17dBm)

Specification:
Specification
Item
Uplink Downlink

Frequency range* 890~915MHz 935~960MHz

Maximum output power 20/17/17dBm±2dB 23/20/17dBm±2dB
Gain ≥70dB
ALC(Auto Level Control) Within 2dB or shut off
Gain adjustment range ≥30dB
≤±1.0dB within 0-20dB
Gain adjustment error
≤±1.5dB within 20-30dB
≥0.4MHz ≥15dB
Out-band ≥0.6MHz ≥35dB
suppression ≥1MHz ≥45dB
≥5MHz ≥50dB
Ripple in-band ≤3dB
Noise Figure ≤6dB
VSWR ≤1.6
Group Delay ≤5.0μsec
9 KHz ~ 1 GHz ≤ -36 dBm/100 KHz
Spurious
Emission
1 GHz ~ 12.75 GHz ≤ -30 dBm/1 MHz

Inter-modulation ≤-36dBm/30KHz @+14dBm/ch/2ch

Built-In Power Supply* AC220V±15%, -48V±10%
Door, Temperature, Power Supply, Output Power, etc
Monitoring and alarming* This function need extra GSM terminal per equipment
for remote NMS monitoring
Input/output impedance 50Ω
Operating temperature -25 ~ +55℃
Relative humidity 5%~95%
Connector N type(Female)

*Note: The star shows this item shall be customized. The frequency range shall be adjustable if required
 15. GSM Trunk Repeater GZF900-VIB (37/33dBm)

Specification:
Specification
Item
Uplink Downlink

Frequency range* 890~915MHz 935~960MHz

Maximum output power -5dBm±2dB 37/33dBm±2dB
Gain ≥40dB ≥40dB
ALC(Auto Level Control) Within 2dB or shut off
Gain adjustment range ≥20dB
Gain adjustment step ≤2dB
≤±1.0dB within 0-10dB
Gain adjustment error
≤±1.0dB within 10-20dB
Out-band rejection ≥70dB
Ripple in-band ≤3dB
Noise Figure ≤5dB -
VSWR ≤1.6
Group Delay ≤1.5μsec
Spurious 9 KHz ~ 1 GHz ≤ -36 dBm/100 KHz
Emission 1 GHz ~ 12.75 GHz ≤ -30 dBm/1 MHz
Inter-modulation ≤-50dBc/3KHz
Built-In Power Supply* AC220V±15%, -48V±10%
Door, Temperature, Power Supply,
Output Power, etc
Monitoring and alarming* This function need extra GSM terminal
per equipment
for remote NMS monitoring
Input/output impedance 50Ω
Operating temperature -25 ~ +55℃
Relative humidity 5%~95%
Connector N type(Female)

*Note: The star shows this item shall be customized. The frequency range shall be adjustable if required.
 16. GSM Cable Access Frequency Shifting Repeater GZF918-V
(band selective)

Specification(master unit)
Specification
Item
Uplink Downlink

Frequency range* 890~915MHz 935~960MHz

Shifting/Transmission Frequency * 1710～1755MHz 1805～1850MHz
Maximum output power -10±2dBm 33±2dBm
Gain ≥40dB
ALC(Auto Level Control) Within 2dB or shut off
Gain adjustment range ≥20dB
Max input power +10dBm
Gain adjustment step ≤2dB
≤±1.0dB within 0-10dB
Gain adjustment error
≤±1.0dB within 10-20dB
Frequency error ±5×10-8
Ripple in-band ≤3dB
Noise Figure ≤4dB -
VSWR ≤1.4
Group Delay ≤10μsec(system delay)
9 KHz ~ 1 GHz ≤ -36 dBm/100 KHz
Spurious
Emission
1 GHz ~ 12.75 GHz ≤ -30 dBm/1 MHz

Inter-modulation ≤-50dBc/3kHz
Built-In Power Supply* AC220V±15%, -48V±10%
Door, Temperature, Power Supply, Output Power, etc
Monitoring and alarming* This function need extra GSM terminal per equipment
for remote NMS monitoring
Input/output impedance 50Ω
Operating temperature -25 ~ +55℃
Relative humidity 5%~95%
Connector N type(Female)
Specification (slave unit)
Specification
Item
Uplink Downlink

Frequency range* 890~915MHz 935~960MHz

Shifting/Transmission Frequency* 1710～1755MHz 1805～1850MHz
Maximum output power 27dBm±2dBm 43/40/37±2dBm
Gain ≥90dB
ALC(Auto Level Control) Within 2dB or shut off
Gain adjustment range ≥30dB
Gain adjustment step ≤2dB
≤±1.0dB within 0-20dB
Gain adjustment error
≤±1.5dB within 20-30dB
Frequency error ±5×10-8
Ripple in-band ≤3dB
Noise Figure ≤4dB
VSWR ≤1.4
Group Delay ≤10μsec(System delay)
9 KHz ~ 1 GHz ≤ -36 dBm/100 KHz
Spurious
Emission
1 GHz ~ 12.75 GHz ≤ -30 dBm/1 MHz

Inter-modulation ≤-45dBc/3KHz ≤-50dBc/3kHz

≥0.4MHz ≥15dB -
Out-band ≥0.6MHz ≥35dB -
suppression ≥1MHz ≥45dB -
≥5MHz ≥50dB -
Built-In Power Supply* AC220V±15%, -48V±10%
Door, Temperature, Power Supply, Output Power, etc
Monitoring and alarming* This function need extra GSM terminal per equipment
for remote NMS monitoring
Input/output impedance 50Ω
Operating temperature -25 ~ +55℃
Relative humidity 5%~95%
Connector N type(Female)

*Note: The star shows this item shall be customized.

 17. GSM Wireless Access Frequency Shifting Repeater GZF918-V
(band selective)

Specification (master unit)

Specification
Item
Uplink Downlink

Frequency range* 890~915MHz 935~960MHz

Shifting/Transmission Frequency * 1710～1755MHz 1805～1850MHz
Maximum output power 27dBm±2dBm 33±2dBm
Gain ≥80dB
ALC(Auto Level Control) Within 2dB or shut off
Gain adjustment range ≥30dB
Max input power -10dBm
Gain adjustment step ≤2dB
≤±1.0dB within 0-20dB
Gain adjustment error
≤±1.5dB within 20-30dB
Frequency error ±5×10-8
Ripple in-band ≤3dB
Noise Figure ≤4dB
VSWR ≤1.5
Group Delay ≤10μsec（System delay）

Spurious 9 KHz ~ 1 GHz ≤ -36 dBm/100 KHz

Emission 1 GHz ~ 12.75 GHz ≤ -30 dBm/1 MHz
Inter-modulation ≤-50dBc/3kHz ≤-45dBc/3kHz
≥0.4MHz - ≥15dB
Out-band ≥0.6MHz - ≥35dB
suppression ≥1MHz - ≥45dB
≥5MHz - ≥50dB
Built-In Power Supply* AC220V±15%, -48V±10%
Door, Temperature, Power Supply, Output Power, etc
Monitoring and alarming* This function need extra GSM terminal per equipment for
remote NMS monitoring
Input/output impedance 50Ω
Operating temperature -25 ~ +55℃
Relative humidity 5%~95%
Connector N type(Female)
Specification (slave unit)
Specification
Item
Uplink Downlink

Frequency range* 890~915MHz 935~960MHz

Shifting/Transmission Frequency* 1710～1755MHz 1805～1850MHz
Maximum output power 27dBm±2dBm 43/40/37±2dBm
Gain ≥90dB
ALC(Auto Level Control) Within 2dB or shut off
Gain adjustment range ≥30dB
Gain adjustment step ≤2dB
≤±1.0dB within 0-20dB
Gain adjustment error
≤±1.5dB within 20-30dB
Frequency error ±5×10-8
Ripple in-band ≤3dB
Noise Figure ≤4dB
VSWR ≤1.4
Group Delay ≤10μsec(System delay)

Spurious 9 KHz ~ 1 GHz ≤ -36 dBm/100 KHz

Emission 1 GHz ~ 12.75 GHz ≤ -30 dBm/1 MHz
Inter-modulation ≤-45dBc/3KHz ≤-50dBc/3kHz
≥0.4MHz ≥15dB -
Out-band ≥0.6MHz ≥35dB -
suppression ≥1MHz ≥45dB -
≥5MHz ≥50dB -
Built-In Power Supply* AC220V±15%, -48V±10%
Door, Temperature, Power Supply, Output Power, etc
Monitoring and alarming* This function need extra GSM terminal per equipment
for remote NMS monitoring
Input/output impedance 50Ω
Operating temperature -25 ~ +55℃
Relative humidity 5%~95%
Connector N type(Female)

*Note: The star shows this item shall be customized.

 18. GSM Cable Access Frequency Shifting Repeater GZF918-V
(channel selective)

Specification (master unit)

Specification
Item
Uplink Downlink

Frequency range* 890~915MHz 935~960MHz

Shifting/Transmission Frequency* 1710～1755MHz 1805～1850MHz
Maximum output power -10±2dBm 33±2dBm
Gain ≥40dB
Channel number 2/4/6/8
ALC(Auto Level Control) Within 2dB or shut off
Gain adjustment range ≥20dB
Max input power +10dBm
Gain adjustment step ≤2dB
≤±1.0dB within 0-10dB
Gain adjustment error
≤±1.0dB within 10-20dB
Frequency error ±5×10-8
Noise Figure ≤4dB -
VSWR ≤1.4
Group Delay ≤10μsec(System delay)
Spurious 9 KHz ~ 1 GHz ≤ -36 dBm/100 KHz
Emission 1 GHz ~ 12.75 GHz ≤ -30 dBm/1 MHz
Inter-modulation ≤-50dBc/3kHz ≤-45dBc/3kHz
Built-In Power Supply* AC220V±15%, -48V±10%
Door, Temperature, Power Supply, Output Power, etc
Monitoring and alarming* This function need extra GSM terminal per equipment for
remote NMS monitoring
Input/output impedance 50Ω
Operating temperature -25 ~ +55℃
Relative humidity 5%~95%
Connector N type(Female)
Specification (slave unit)
Specification
Item
Uplink Downlink

Frequency range* 890~915MHz 935~960MHz

Shifting/Transmission Frequency * 1710～1755MHz 1805～1850MHz
Maximum output power 27dBm±2dBm 43/40/37±2dBm
Maximum Gain ≥90dB
ALC(Auto Level Control) Within 2dB or shut off
Channel number 2/4/6/8
Gain adjustment range ≥30dB
Gain adjustment step ≤2dB
≤±1.0dB within 0-20dB
Gain adjustment error
≤±1.5dB within 20-30dB
Frequency error ±5×10-8
Ripple in-band ≤3dB
Noise Figure ≤4dB
VSWR ≤1.4
Group Delay ≤10μsec(System delay)
9 KHz ~ 1 GHz ≤ -36 dBm/100 KHz
Spurious Emission
1 GHz ~ 12.75 GHz ≤ -30 dBm/1 MHz
Inter-modulation ≤-45dBc/3KHz
≥400KHz ≥15dB -
Out-band suppression
≥600KHz ≥45dB -
Built-In Power Supply* AC220V±15%, -48V±10%
Door, Temperature, Power Supply, Output Power, etc
Monitoring and alarming* This function need extra GSM terminal per equipment
for remote NMS monitoring
Input/output impedance 50Ω
Operating temperature -25 ~ +55℃
Relative humidity 5%~95%
Connector N type(Female)

*Note: The star shows this item shall be customized.

 19. GSM Wireless Access Frequency Shifting Repeater GZF918-V
(channel selective)

Specification (master unit)

Specification
Item
Uplink Downlink

Frequency range* 890~915MHz 935~960MHz

Shifting/Transmission Frequency* 1710～1755MHz 1805～1850MHz
Maximum output power 27dBm±2dBm 30±2dBm
Gain ≥80dB
ALC(Auto Level Control) Within 2dB or shut off
Channel number 2/4/6/8
Gain adjustment range ≥30dB
Max input power -10dBm
Gain adjustment step ≤2dB
≤±1.0dB within 0-20dB
Gain adjustment error
≤±1.5dB within 20-30dB
Frequency error ±5×10-8
Noise Figure ≤4dB
VSWR ≤1.5
Group Delay ≤10μsec(System delay)
Spurious 9 KHz ~ 1 GHz ≤ -36 dBm/100 KHz
Emission 1 GHz ~ 12.75 GHz ≤ -30 dBm/1 MHz
Inter-modulation ≤-50dBc/3kHz ≤-45dBc/3kHz
Out-band ≥400KHz - ≥15dB
suppression ≥600KHz - ≥35dB
Built-In Power Supply* AC220V±15%, -48V±10%
Door, Temperature, Power Supply, Output Power, etc
Monitoring and alarming* This function need extra GSM terminal per equipment
for remote NMS monitoring
Input/output impedance 50Ω
Operating temperature -25 ~ +55℃
Relative humidity 5%~95%
Connector N type(Female)
Specification (slave unit)
Specification
Item
Uplink Downlink

Frequency range* 890~915MHz 935~960MHz

Shifting/Transmission Frequency * 1710～1755MHz 1805～1850MHz
Maximum output power 27dBm±2dBm 43/40/37±2dBm
Maximum Gain ≥90dB
ALC(Auto Level Control) Within 2dB or shut off
Channel number 2/4/6/8
Gain adjustment range ≥30dB
Gain adjustment step ≤2dB
≤±1.0dB within 0-20dB
Gain adjustment error
≤±1.5dB within 20-30dB
Frequency error ±5×10-8
Ripple in-band ≤3dB
Noise Figure ≤4dB
VSWR ≤1.4
Group Delay ≤10μsec(System delay)
Spurious 9 KHz ~ 1 GHz ≤ -36 dBm/100 KHz
Emission 1 GHz ~ 12.75 GHz ≤ -30 dBm/1 MHz
Inter-modulation ≤-45dBc/3KHz
Out-band ≥400KHz ≥15dB -
suppression ≥600KHz ≥45dB -
Built-In Power Supply* AC220V±15%, -48V±10%
Door, Temperature, Power Supply, Output Power, etc
Monitoring and alarming* This function need extra GSM terminal per equipment
for remote NMS monitoring
Input/output impedance 50Ω
Operating temperature -25 ~ +55℃
Relative humidity 5%~95%
Connector N type(Female)

*Note: The star shows this item shall be customized.

 20. GSM Wireless Access Frequency Shifting Repeater GZF909-V
(channel selective)

Specification (master unit)

Specification
Item
Uplink Downlink

Frequency range* 890~915MHz 935~960MHz

Shifting/Transmission Frequency * 890~915MHz 935~960MHz
Maximum output power 33dBm±2dBm 37±2dBm
Maximum Gain ≥90dB
ALC(Auto Level Control) Within 2dB or shut off
Channel number 2/4
Gain adjustment range ≥30dB
Max input power -10dBm
Gain adjustment step ≤2dB
≤±1.0dB within 0-20dB
Gain adjustment error
≤±1.5dB within 20-30dB
Frequency error ±5×10-8
Noise Figure ≤5dB
VSWR ≤1.5
Group Delay ≤10μsec(System delay)
Out-band F0±400KHz ≤-40dBc
suppression F0±600KHz ≤-45dBc
Spurious 9 KHz ~ 1 GHz ≤ -36 dBm/100 KHz
Emission 1 GHz ~ 12.75 GHz ≤ -30 dBm/1 MHz
In-band ≤-50dBc/3kHz
Inter-modulation 9kHz-1GHz: -36dBm/100kHz
Out-band
1GHz-12.75GHz: -30dBm/1MHz
Built-In Power Supply* AC220V±15%, -48V±10%
Door, Temperature, Power Supply, Output Power, etc
Monitoring and alarming* This function need extra GSM terminal per equipment
for remote NMS monitoring
Input/output impedance 50Ω
Operating temperature -25 ~ +55℃
Relative humidity 5%~95%
Connector N type(Female)
Specification (slave unit)
Specification
Item
Uplink Downlink

Frequency range* 890~915MHz 935~960MHz

Shifting/Transmission Frequency * 890~915MHz 935~960MHz
Maximum output power 25dBm±2dB 43/40/37dBm±2dB
Maximum Gain ≥90dB
ALC(Auto Level Control) Within 2dB or shut off
Channel number 2/4/
Gain adjustment range ≥30dB
Gain adjustment step ≤2dB
≤±1.0dB within 0-20dB
Gain adjustment error
≤±1.5dB within 20-30dB
Frequency error ±5×10-8
Ripple in band ≤3dB
Noise Figure ≤5dB
VSWR ≤1.4
Group Delay ≤10μsec(System delay)
Out band F0±400KHz ≤-40dBc
suppression F0±600KHz ≤-45dBc
Spurious 9 KHz ~ 1 GHz ≤ -36 dBm/100 KHz
Emission 1 GHz ~ 12.75 GHz ≤ -30 dBm/1 MHz
In-band ≤-50dBc/3kHz
Inter-modulation 9kHz-1GHz: -36dBm/100kHz
Out-band
1GHz-12.75GHz: -30dBm/1MHz
Built-In Power Supply* AC220V±15%, -48V±10%
Door, Temperature, Power Supply, Output Power, etc
Monitoring and alarming* This function need extra GSM terminal per equipment
for remote NMS monitoring
Input/output impedance 50Ω
Operating temperature -25 ~ +55℃
Relative humidity 5%~95%
Connector N type(Female)

*Note: The star shows this item shall be customized.

 21. GSM Dual band Repeater GZF04-VIF-C (Dual band)

Specification(two sub-bands):
Specification
Item
Uplink Downlink

Frequency range* 898.2－906.2MHz/1722~1724MHz 943－951MHz/1816~1818MHz

Maximum output power 19dBm±2dB
Gain ≥70dB
ALC(Auto Level Control) Within 2dB or shut off
Gain adjustment range ≥31dB
Gain adjustment step ≤1dB
≤±1.0dB within 0-20dB
Gain adjustment error
≤±1.5dB within 20-30dB
Frequency error ±5×10-8
Ripple in-band ≤4dB
Noise Figure ≤5dB
VSWR ≤1.6
Group Delay ≤10μsec(System delay)
≥0.4MHz ≥15dB
Out-band ≥0.6MHz ≥35dB
suppression ≥1MHz ≥45dB
≥5MHz ≥50dB
Spurious 9 KHz ~ 1 GHz ≤ -36 dBm/100 KHz
Emission 1 GHz ~ 12.75 GHz ≤ -30 dBm/1 MHz
Inter-modulation ≤-36dBm ≤-30dBm
Built-In Power Supply* AC220V±15%

Monitoring and alarming* Output Power Alarm

Input/output impedance 50Ω

Operating temperature -5 ~ +55℃
Relative humidity 5%~95%
Connector N type(Female)
Specification (three sub-bands):

Item Specification

Continuous 8Mhz in GSM band

GSM 900: ARFCN 41-80
Frequency range*
Two uncontinuous 2Mhz in DCS band
GSM 1800: ARFCN 512-521 & ARFCN 571-580

Maximum output(each band) 20dBm

Maximum gain 70dB

Gain adjustability 30dB in step of 1dB
≤±1.0dB within 0-20dB
Gain adjustment error
≤±1.5dB beyond 20dB
8MHz in 900MHz band
Bandwidth
2MHz in 1800MHz band (total 4Mhz)
Ripple In-band (Typical) ≤3dB
Noise Figure(Uplink) ≤6dB

VSWR ≤1.5

Group Delay ≤5μs

Spurious Emission & 9KHz--1GHz: ≤-36dBm/100KHz
Inter-modulation 1GHz--12.75GHz: ≤-30dBm/1MHz
Out-band Suppression
≥ 50dB @ 1MHz from edge of operation band
(Typical Value)
Filter Used Highly selective SAW Filter

Power Supply AC 220V, 50Hz

Power Consumption 100W

Operating temperature -5 ~ +55°C

RF Connector N-Female
Visual Indication Equipment Failure, AC/DC Failure, Transmit Power Low

*Note: The star shows this item shall be customized.

 22. CDMA Optical Fiber Repeater GZF800-III (43/40/37/33dBm)

43dBm 40/37/33dBm

Specification:
Specification
Item
Uplink Downlink

Frequency range* 825MHz~835MHz 870MHz~880MHz

Maximum output power -2dBm±2dB 43/40/37/33dBm±2dB
≥68dB (43dBm)
Gain ≥58dB
≥63dB (40/37/33dBm)
Max input power -40dBm 10dBm
Frequency error ≤40Hz
Gain adjustment range ≥30dB ≥40dB
Gain adjustment step ≤2dB
≤±1.0dB within 0dB~20dB
Gain adjustment error
≤±1.5dB within 20dB~30dB
Waveform Quality ≥0.96 ≥0.95
≥2.5MHz：≤-40dB OR ≤-13dBm/30KHz
≤2.5MHz：≤-40dB OR ≤-13dBm/30KHz
Out-band suppression
≥10MHz： ≤-60dB OR ≤-33dBm/30KHz
≤10MHz： ≤-60dB OR ≤-33dBm/30KHz
Ripple In-band ≤3dB
Noise Figure ≤5dB
VSWR ≤1.4
Group Delay ≤5μsec
⊿f ≥900kHz:≤-42dBc/30kHz
Spurious
or ≤-32dBm/30kHz ⊿f ≥750kHz: ≤ -45dBc/30kHz
In each carrier
Emission ⊿f≥1.98MHz:≤-54dBc/30kHz ⊿f ≥1.98MHz: ≤-60dBc/30kHz
or ≤-44dBm/30kHz
In working band ≤-15dBm/30kHz
Out of 1MHz 9kHz~150kHz ≤-36dBm/1kHz (peak value)
transition band from 150kHz~30MHz ≤-36dBm/10kHz(peak value)
edge of working band
30MHz~1GHz (excluding
806MHz～821MHz、
≤-36dBm/100kHz(peak value)
885MHz-915MHz and
930MHz-960MHz)
 1GHz~12.75GHz(excluding
1.71GHz-1.92GHz and ≤-30dBm/1MHz(peak value)
3.4GHz-3.53GHz)
806MHz~821MHz ≤-67dBm/100kHz(effective value)
885MHz~915MHz ≤-67dBm/100kHz(effective value)
930MHZ~960MHz ≤-47dBm/100kHz(peak value)
1.71GHz~1.92GHz ≤-47dBm/100kHz(peak value)
3.4GHz~3.53GHz ≤-47dBm/100kHz(peak value)
Within 1MHz
transition band from ≤-22dBm/100kHz(effective value)
edge of working band
In working band ≤-15dBm/30kHz
Inter-
modulation 1MHz away from 9kHz~1GHz( Including 1GHz): -36dBm/100kHz
edge of working band 1GHz ~12.75GHz: -36dBm/1MHz
Built-In Power Supply* AC220V±15%, -48V±10%
Relative humidity 5%~95%
Connector N type(Female)
Optical wavelength 1.31um or 1.55um
Transmission distances (Max.) 15km
Optical Connector FC/APC
Input/output impedance 50Ω
Door, Temperature, Power Supply, Output Power, etc.
Monitoring and alarming* This function need extra CDMA terminal per equipment for remote
NMS monitoring
Operating temperature -25°C ~ +55°C

*Note: The star shows this item shall be customized.

 23. CDMA Optical Fiber Repeater GZF800-IV (43/40/37/33dBm)

43dBm 40/37/33dBm

Specification:
Specification
Item
Uplink Downlink

Frequency range* 825 MHz~835MHz 870 MHz~880MHz

Maximum output power -2dBm±2dB 43/40/37/33dBm±2dB
≥68dB (43dBm)
Gain ≥58dB
≥63dB (40/37/33dBm)
Max Input Power -40dBm 10dBm
Frequency error ≤40Hz
Gain adjustment range ≥30dB ≥40dB
Gain adjustment step ≤2dB
≤±1.0dB within 0dB~20dB
Gain adjustment error
≤±1.5dB within 20dB~30dB
Waveform Quality ≥0.96 ≥0.95
≥2.5MHz：≤-40dB OR ≤-13dBm/30kHz
≤2.5MHz：≤-40dB OR ≤-13dBm/30kHz
Out-band suppression
≥10MHz： ≤-60dB OR ≤-33dBm/30kHz
≤10MHz： ≤-60dB OR ≤-33dBm/30kHz
Ripple In-band ≤3dB
Noise Figure ≤6dB
VSWR ≤1.4
Group Delay ≤5μsec
⊿f ≥900kHz:≤-42dBc/30kHz ⊿f ≥750kHz:
Spurious
or ≤-32dBm/30kHz ≤ -45dBc/30kHz
In each carrier
Emission ⊿f≥1.98MHz:≤-54dBc/30kHz ⊿f ≥1.98MHz:
or ≤-44dBm/30kHz ≤-60dBc/30kHz
In working band ≤-15dBm/30kHz
Out of 1MHz 9kHz~150kHz ≤-36dBm/1kHz(peak value)
transition band from 150kHz~30MHz ≤-36dBm/10kHz(peak value)
edge of working 30MHz~1GHz (excluding
band 806MHz~821MHz、885MHz~915MHz ≤-36dBm/100kHz(peak value)
and 930MHz~960MHz)
1GHz~12.75GHz(excluding
1.71GHz~1.92GHz and ≤-30dBm/1MHz(peak value)
3.4GHz~3.53GHz)
 806MHz~821MHz ≤-67dBm/100kHz(effective value)
885MHz~915MHz ≤-67dBm/100kHz(effective value)
930MHZ~960MHz ≤-47dBm/100kHz(peak value)
1.71GHz~1.92GHz ≤-47dBm/100kHz(peak value)
3.4GHz~3.53GHz ≤-47dBm/100kHz(peak value)
Within 1MHz
transition band from
≤-22dBm/100kHz(effective value)
edge of working
band
In working band ≤-15dBm/30kHz
Inter- 1MHz away from
modulation 9kHz~1GHz( Including 1GHz): -36dBm/100kHz
edge of working
1GHz~12.75GHz: -36dBm/1MHz
band
Built-In Power Supply* AC220V±15% , -48V±10%
Relative humidity 5%~95%
Connector N type(Female)
Optical wavelength 1.31um or 1.55um
Transmission distances (Max.) 15km
Optical Connector FC/APC
Input/output impedance 50Ω
Door, Temperature, Power Supply, Output Power, etc
Monitoring and alarming* This function need extra CDMA terminal per equipment
for remote NMS monitoring
Operating temperature -25°C ~ +55°C
*Note: The star shows this item shall be customized.
 24. CDMA Wireless Access Low Power Repeater GZF800-VID (27/23/17dBm)

Specification:
Specification
Item
Uplink Downlink

Frequency range* 825MHz~835MHz 870 MHz~880MHz

Maximum output power 27/23/17dBm±2dB
≥80dB (27/23dBm)
Gain
≥75dB (17dBm)
When the input increases 10dB, the output should not exceed 2dB
ALC(Auto Level Control)
or it is shut off automatically.
Frequency error ≤40Hz
Gain adjustment range 0dB~30dB
Gain adjustment step ≤1dB
≤±1.0dB within 0dB~20dB
Gain adjustment error
≤±1.5dB within 20dB~30dB
Waveform Quality ≥0.96 ≥0.95
≥2.5MHz：≤-40dB OR ≤-13dBm/30kHz
≤2.5MHz：≤-40dB OR ≤-13dBm/30kHz
Out-band suppression
≥10MHz： ≤-60dB OR ≤-33dBm/30kHz
≤10MHz： ≤-60dB OR ≤-33dBm/30kHz
Ripple In-band ≤3dB
Noise Figure ≤6dB
VSWR ≤1.5
Group Delay ≤5μsec
⊿f ≥900kHz:≤-42dBc/30kHz
Spurious
or ≤-32dBm/30kHz ⊿f ≥750kHz: ≤ -45dBc/30kHz
In each carrier
Emission ⊿f≥1.98MHz:≤-54dBc/30kHz ⊿f ≥1.98MHz: ≤-60dBc/30kHz
or ≤-44dBm/30kHz
In working band ≤-15dBm/30kHz
Out of 1MHz 9kHz~150kHz ≤-36dBm/1kHz(peak value)
transition band from 150kHz~30MHz ≤-36dBm/10kHz(peak value)
edge of working band
30MHz~1GHz(excluding
806MHz~821MHz、885MHz~915 ≤-36dBm/100kHz(peak value)
MHz and 930 MHz~960MHz)
1GHz~12.75GHz(excluding
1.71GHz~1.92GHz and ≤-36dBm/1MHz(peak value)
3.4 GHz~3.53GHz)
 806MHz~821MHz ≤-67dBm/100kHz(effective value)
885MHz~915MHz ≤-67dBm/100kHz(effective value)
930MHZ~960MHz ≤-47dBm/100kHz(peak value)
1.71GHz~1.92GHz ≤-47dBm/100kHz(peak value)
3.4GHz~3.53GHz ≤-47dBm/100kHz(peak value)
Within 1MHz
transition band from ≤-22dBm/100kHz(effective value)
edge of working band
In working band ≤-15dBm/30kHz
Inter-
modulation 1MHz away from 9kHz~1GHz( Including 1GHz): -36dBm/100kHz
edge of working band 1GHz ~12.75GHz: -36dBm/1MHz
Built-In Power Supply* AC220V±15%, -48V±10%
Relative humidity 5%~95%
Connector N type(Female)
Input/output impedance 50Ω
Door, Temperature, Power Supply, Output Power, etc
Monitoring and alarming* This function need extra CDMA terminal per equipment for remote NMS
monitoring
Operating temperature -25°C ~ +55°C
*Note: The star shows this item shall be customized.
 25. CDMA Wireless Access High Power Repeater GZF800-V (43/40/37dBm)

43dBm 40/37dBm

Specification:
Specification
Item
Uplink Downlink

Frequency range* 825MHz~835MHz 870 MHz~880MHz

Maximum output power 37/33/33±2dBdBm (43/40/37dBm) 43/40/37 dBm ±2dB(43/40/37dBm)
≥100dB (43dBm)
Gain ≥98dB (43/40/37dBm)
≥95dB (40/37dBm)
Frequency error ≤40Hz
Gain adjustment range ≥30dB
Gain adjustment step ≤2dB
≤±1.0dB within 0dB~20dB
Gain adjustment error
≤±1.5dB within 20dB~30dB
Waveform Quality ≥0.96 ≥0.95
≥2.5MHz：≤-40dB OR ≤-13dBm/30kHz
≤2.5MHz：≤-40dB OR ≤-13dBm/30kHz
Out- band suppression
≥10MHz： ≤-60dB OR ≤-33dBm/30kHz
≤10MHz： ≤-60dB OR ≤-33dBm/30kHz
Ripple In-band ≤3dB
Noise Figure ≤5dB
VSWR ≤1.4
Group Delay ≤5μsec
⊿f ≥900kHz:≤-42dBc/30kHz
Spurious
or ≤-32dBm/30kHz ⊿f ≥750kHz: ≤ -45dBc/30kHz
In each carrier
Emission ⊿f≥1.98MHz:≤-54dBc/30kHz ⊿f ≥1.98MHz: ≤-60dBc/30kHz
or ≤-44dBm/30kHz
In working band ≤-15dBm/30kHz
Out of 1MHz 9kHz~150kHz ≤-36dBm/1kHz(peak value)
transition band from 150kHz~30MHz ≤-36dBm/10kHz(peak value)
edge of working band
30MHz~1GHz(excluding
806 MHz~821MHz 、
≤-36dBm/100kHz(peak value)
885 MHz~915MHz and
930 MHz~960MHz)
 1GHz~12.75GHz(excluding
1.71GHz~1.92GHz and ≤-36dBm/1MHz(peak value)
3.4GHz~3.53GHz)
806MHz~821MHz ≤-67dBm/100kHz(effective value)
885MHz~915MHz ≤-67dBm/100kHz(effective value)
930MHZ~960MHz ≤-47dBm/100kHz(peak value)
1.71GHz~1.92GHz ≤-47dBm/100kHz(peak value)
3.4GHz~3.53GHz ≤-47dBm/100kHz(peak value)
Within 1MHz
transition band from ≤-22dBm/100kHz(effective value)
edge of working band
In working band ≤-15dBm/30kHz
Inter-
modulation 1MHz away from 9kHz~1GHz( Including 1GHz): -36dBm/100kHz
edge of working band 1GHz~12.75GHz: -36dBm/1MHz
Built-In Power Supply* AC220V±15%, -48V±10%
Relative humidity 5%~95%
Connector N type(Female)
Input/output impedance 50Ω
Door, Temperature, Power Supply, Output Power, etc
Monitoring and alarming* This function need extra CDMA terminal per equipment for remote NMS
monitoring
Operating temperature -25°C~+55°C
*Note: The star shows this item shall be customized.
 26. CDMA Wireless Access High Power Repeater GZF800-V
(43/40/37dBm Channel Selective)

43dBm 40/37dBm

Specification:
Specification
Item
Uplink Downlink

Frequency range* 825 MHz ~835MHz 870 MHz ~880MHz

Maximum output power 37/33/33±2dBdBm (43/40/37dBm) 43/40/37 dBm ±2dB(43/40/37dBm)
≥105dB (43dBm)
Gain ≥100dB (43/40/37dBm)
≥100dB (40/37dBm)
Channel number* Support 2 CDMA channels
Frequency error ≤40Hz
Gain adjustment range ≥30dB
Gain adjustment step ≤2dB
≤±1.0dB within 0dB~20dB
Gain adjustment error
≤±1.5dB within 20dB~30dB
Waveform Quality ≥0.96 ≥0.95
≥2.5MHz：≤-40dB OR≤-13dBm/30kHz
≤2.5MHz：≤-40dB OR≤-13dBm/30kHz
In each carrier
≥10MHz： ≤-60dB OR≤-33dBm/30kHz
Out-band ≤10MHz： ≤-60dB OR≤-33dBm/30kHz
suppression In each channel
(Out of 1.98MHz
band from edge ≤－38dBc/30kHz OR ≤－44dBc/30kHz OR
of assigned ≤－13dBm/30kHz ≤－17dBm/30kHz
CDMA
frequency)
Noise Figure ≤5dB
VSWR ≤1.4
Group Delay ≤5μsec
Spurious ⊿f ≥900kHz:≤-42dBc/30kHz ⊿f ≥750kHz: ≤ -45dBc/30kHz
In each carrier
Emission ⊿f≥1.98MHz:≤-54dBc/30kHz ⊿f ≥1.98MHz: ≤-60dBc/30kHz
In working band ≤-15dBm/30kHz
Out of 1MHz 9kHz~150kHz ≤-36dBm/1kHz(peak value)
transition band from 150kHz~30MHz ≤-36dBm/10kHz(peak value)
 edge of working band 30MHz~1GHz(excluding
806MHz~821MHz 、
≤-36dBm/100kHz(peak value)
885MHz~915Mhz and
930MHz~960MHz)
1GHz~12.75GHz(excluding
1.71 GHz~1.92GHz and ≤-36dBm/1MHz(peak value)
3.4 GHz~3.53GHz)
806MHz~821MHz ≤-67dBm/100kHz(effective value)
885MHz~915MHz ≤-67dBm/100kHz(effective value)
930MHZ~960MHz ≤-47dBm/100kHz(peak value)
1.71GHz~1.92GHz ≤-47dBm/100kHz(peak value)
3.4GHz~3.53GHz ≤-47dBm/100kHz(peak value)
Within 1MHz
transition band from ≤-22dBm/100kHz(effective value)
edge of working band
In working band ≤-15dBm/30kHz
Inter-
modulation 1MHz away from 9kHz~1GHz( Including 1GHz): -36dBm/100kHz
edge of working band 1GHz ~12.75GHz: -36dBm/1MHz
Built-In Power Supply* AC220V±15%, -48V±10%
Relative humidity 5%~95%
Connector N type(Female)
Input/output impedance 50Ω
Door, Temperature, Power Supply, Output Power, etc
Monitoring and alarming* This function need extra CDMA terminal per equipment for remote NMS
monitoring
Operating temperature -25°C ~ +55°C
*Note: The star shows this item shall be customized.
 27. CDMA Cable Access Frequency Shifting Repeater GZF808-V
(Channel selective)

Specification(master unit):
Specification
Item
Uplink Downlink

Frequency range* 825MHz~835MHz 870MHz~880MHz

Maximum output power -15±2dBdBm 25dBm±2dB
Gain ≥40dB
Ripple In-band ≤3 dB
Channel number* Support 1/2 CDMA channels
Frequency error ≤40Hz
Gain adjustment range 30dB
Waveform Quality ≥0.95
≥2.5MHz：≤-40dB
≤2.5MHz：≤-40dB
Out--band suppression
≥10MHz： ≤-60dB
≤10MHz： ≤-60dB
Noise Figure ≤4dB
VSWR ≤1.4
Group Delay ≤5μsec
⊿f ≥900kHz: ≤-42dBc/30kHz ⊿f ≥750KHz: ≤-45dBc/30kHz
In each carrier
⊿f≥1.98MHz:≤-59dBc/30kHz ⊿f ≥1.98MHz: ≤-65dBc/30kHz
In working band ≤-22dBm/30kHz
9kHz~150kHz ≤-36dBm/1kHz(peak value)
150kHz~30MHz ≤-36dBm/10kHz(peak value)
Spurious
30MHz~1GHz ≤-36dBm/100kHz(peak value)
Emission Out of 1MHz 1GHz~12.75GHz ≤-30dBm/1MHz(peak value)
transition band from 806MHz~821MHz ≤-67dBm/100kHz(effective value)
edge of working band 885MHz~915MHz ≤-67dBm/100kHz(effective value)
930MHZ~960MHz ≤-47dBm/100kHz(peak value)
1.71GHz~1.92GHz ≤-47dBm/100kHz(peak value)
3.4GHz~3.53GHz ≤-47dBm/100kHz(peak value)
Inter-modulation -15dBm
Built-In Power Supply* AC220V±15%, -48V±10%
Relative humidity 5%~95%
 Connector N type(Female)
Input/output impedance 50Ω
Door, Temperature, Power Supply, Output Power, etc
Monitoring and alarming* This function need extra CDMA terminal per equipment for remote NMS
monitoring
Operating temperature -25°C~+55°C

Specification(slave unit):
Specification
Item
Uplink Downlink

Frequency range* 825MHz~835MHz 870MHz~880MHz

Maximum output power 25dBm±2dB 43/40/37/33dBm±2dB
Maximum Gain ≥90dB
Channel number* Support 1/2 CDMA channels
Frequency error ≤5*10-8
Gain adjustment range 30dB
Waveform Quality ≥0.95
≥2.5MHz：≤-40dB
≤2.5MHz：≤-40dB
Out-of-band suppression
≥10MHz： ≤-60dB
≤10MHz： ≤-60dB
Noise Figure ≤4dB
VSWR ≤1.4
Group Delay ≤5μsec
⊿f ≥900kHz:≤-42dBc/30kHz ⊿f ≥750kHz: ≤ -45dBc/30kHz
In each carrier
⊿f≥1.98MHz:≤-58dBc/30kHz ⊿f ≥1.98MHz: ≤-65dBc/30kHz
In working band ≤-22dBm/30kHz
9kHz~150kHz ≤-36dBm/1kHz(peak value)
150kHz~30MHz ≤-36dBm/10kHz(peak value)
Spurious
30MHz~1GHz ≤-36dBm/100kHz(peak value)
Emission Out of 1MHz 1GHz~12.75GHz ≤-30dBm/1MHz(peak value)
transition band from 806MHz~821MHz ≤-67dBm/100kHz(effective value)
edge of working band 885MHz~915MHz ≤-67dBm/100kHz(effective value)
930MHZ~960MHz ≤-47dBm/100kHz(peak value)
1.71GHz~1.92GHz ≤-47dBm/100kHz(peak value)
3.4GHz~3.53GHz ≤-47dBm/100kHz(peak value)
Inter-modulation -15dBm
Built-In Power Supply* AC220V±15%, -48V±10%
Relative humidity 5%~95%
Connector N type(Female)
Input/output impedance 50Ω
Door, Temperature, Power Supply, Output Power, etc
Monitoring and alarming* This function need extra CDMA terminal per equipment for remote NMS
monitoring
Operating temperature -25°C~+55°C

*Note: The star shows this item shall be customized.

 28. CDMA Wireless Access Frequency Shifting Repeater GZF808-V
(Channel selective)

Specification(master unit)
Specification
Item
Uplink Downlink

Frequency range* 825MHz~835MHz 870MHz~880MHz

Maximum output power 25dBm±2dB
Maximum Gain ≥90dB
Channel number* Support 1/2 CDMA channels
Frequency error ≤40Hz
Gain adjustment range ≥30dB
Ripple In-band ≤3 dB
Waveform Quality ≥0.950
≥2.5MHz：≤-40dB
≤2.5MHz：≤-40dB
Out-band suppression
≥10MHz： ≤-60dB
≤10MHz： ≤-60dB
Noise Figure ≤4dB
VSWR ≤1.4
Group Delay ≤5μsec
⊿f ≥900kHz:≤-42dBc/30kHz ⊿f ≥750kHz: ≤ -45dBc/30kHz
In each carrier
⊿f≥1.98MHz:≤-59dBc/30kHz ⊿f ≥1.98MHz: ≤-65dBc/30kHz
In working band ≤-22dBm/30kHz
9kHz~150kHz ≤-36dBm/1kHz(peak value)
150kHz~30MHz ≤-36dBm/10kHz(peak value)
Spurious
30MHz~1GHz ≤-36dBm/100kHz(peak value)
Emission Out of 1MHz 1GHz~12.75GHz ≤-30dBm/1MHz(peak value)
transition band from 806MHz~821MHz ≤-67dBm/100kHz(effective value)
edge of working band 885MHz~915MHz ≤-67dBm/100kHz(effective value)
930MHZ~960MHz ≤-47dBm/100kHz(peak value)
1.71GHz~1.92GHz ≤-47dBm/100kHz(peak value)
3.4GHz~3.53GHz ≤-47dBm/100kHz(peak value)
Inter-modulation ≤-15dBm
Built-In Power Supply* AC220V±15%, -48V±10%
Relative humidity 5%~95%
Connector N type(Female)
 Input/output impedance 50Ω
Door, Temperature, Power Supply, Output Power, etc
Monitoring and alarming* This function need extra CDMA terminal per equipment for remote NMS
monitoring
Operating temperature -25°C ~ +55°C

Specification(slave unit)
Specification
Item
Uplink Downlink

Frequency range* 825MHz~835MHz 870MHz~880MHz

Maximum output power 25dBm±2dB 43/40/37/33dBm±2dB
Maximum Gain ≥90dB
Channel number* Support 1/2 CDMA channels
Frequency error ≤5*10-8
Gain adjustment range 30dB
Waveform Quality ≥0.950
≥2.5MHz：≤-40dB
≤2.5MHz：≤-40dB
Out-band suppression
≥10MHz： ≤-60dB
≤10MHz： ≤-60dB
Noise Figure ≤4dB
VSWR ≤1.4
Group Delay ≤5μsec
⊿f ≥900kHz:≤-42dBc/30kHz ⊿f ≥750kHz: ≤ -45dBc/30kHz
In each carrier
⊿f≥1.98MHz:≤-58dBc/30kHz ⊿f ≥1.98MHz: ≤-65dBc/30kHz
In working band ≤-22dBm/30kHz
9kHz~150kHz ≤-36dBm/1kHz(peak value)
150kHz~30MHz ≤-36dBm/10kHz(peak value)
Spurious
30MHz~1GHz ≤-36dBm/100kHz(peak value)
Emission Out of 1MHz 1GHz~12.75GHz ≤-30dBm/1MHz(peak value)
transition band from 806MHz~821MHz ≤-67dBm/100kHz(effective value)
edge of working band 885MHz~915MHz ≤-67dBm/100kHz(effective value)
930MHZ~960MHz ≤-47dBm/100kHz(peak value)
1.71GHz~1.92GHz ≤-47dBm/100kHz(peak value)
3.4GHz~3.53GHz ≤-47dBm/100kHz(peak value)
Inter-modulation -15dBm
Built-In Power Supply* AC220V±15%, -48V±10%
Relative humidity 5%~95%
Connector N type(Female)
Input/output impedance 50Ω
Door, Temperature, Power Supply, Output Power, etc
Monitoring and alarming* This function need extra CDMA terminal per equipment for remote NMS
monitoring
Operating temperature -25°C~ +55°C

*Note: The star shows this item shall be customized.

 32. GSM 1900 Bandwidth Adjustable Repeater GZF1900-V

Specification
 ITEMS SPECIFICATION

A&D 1940.90~1949.90MHz 1860.90~1869.90MHz

Frequency Range*
F 1970.10~1974.90MHz 1890.10~1894.90MHz
F & C1 1970.10~1979.90MHz 1890.10~1899.90MHz
Bandwidth Selective Range ADF or ADFC1
Frequency Tolerance ≤5×10-8
Repeater Gain 96dB ± 6%
Output Power 37dBm (downlink)/33dBm(uplink)
F0 ±400KHz: ≤-12dB
Out-Band Rejection
F0 ±2.5MHz: ≤-45dB
Flatness In-Band ≤5dB
Gain Adjustable Range 31dB
Gain Adjustable Step 0~31dB step by 1dB
0dB ~ 10dB: ≤1dB
HARDWARE Gain Adjustable Tolerance 10dB ~ 20dB: ≤1.5dB
20dB ~ 30dB: ≤1.5dB
ALC Auto Level Control
Inter-modulation ≤-45dBc/30KHz
≤-36dBm/100KHz@9kHz~1GHz
Spurious Emission
≤-30dBm/1MHz@1GHz~12.75GHz
Noise Figure ≤5 (Max Gain)
VSWR ≤1.4: 1
Ambient temperature -20°C ~ +55°C
Storage temperature -40°C ~ +85°C
Relative humidity 5%~95%
Air Pressure 70~106kPa
Power Supply* 110VAC ± 15%
Forward Power Detect
PA Enable
General Alarm PA Over Power
PA Over Temperature
SOFTWARE Door Open
VSWR Over Limit (≥2: 1)
PLL Unlock
Serious Alarm DC Power Lost
AC Power Lost
 33.GSM 1900 Bandwidth Adjustable Repeater GZF19002-V

Specification
 ITEMS SPECIFICATION

A&D 1940.90~1949.90MHz 1860.90~1869.90MHz

Frequency Range
F 1970.10~1974.90MHz 1890.10~1894.90MHz
F & C1 1970.10~1979.90MHz 1890.10~1899.90MHz
Bandwidth Selective Range ADF or ADFC1
Frequency Tolerance ≤5×10-8
Repeater Gain 96dB ± 6%
Output Power 37dBm (downlink)/33dBm(uplink)
F0 ±400KHz: ≤-12dB
Out-Band Rejection
F0 ±2.5MHz: ≤-45dB
Flatness In Band ≤5dB
Gain Adjustable Range 31dB
Gain Adjustable Step 0~31dB step by 1dB
0dB ~ 10dB: ≤1dB
HARDWARE Gain Adjustable Tolerance 10dB ~ 20dB: ≤1.5dB
20dB ~ 30dB: ≤1.5dB
ALC Auto Level Control
Inter-modulation ≤-45dBc/30KHz
≤-36dBm/100KHz@9kHz~1GHz
Spurious Emission
≤-30dBm/1MHz@1GHz~12.75GHz
Noise Figure ≤5 (Max Gain)
VSWR ≤1.4: 1
Ambient temperature -20°C ~ +55°C
Storage temperature -40°C ~ +85°C
Relative humidity 5%~95%
Air Pressure 70~106kPa
Power Supply* 110VAC ± 15%
Forward Power Detect
PA Enable
General Alarm PA Over Power
PA Over Temperature
SOFTWARE Door Open
VSWR Over Limit (≥2: 1)
PLL Unlock
Serious Alarm DC Power Lost
AC Power Lost
 35.GSM 1900 Bandwidth Adjustable Repeater GZF1900-V

Specification:

ITEMS SPECIFICATION

A&D 1940.90~1949.90MHz 1860.90~1869.90MHz

Frequency Range
F 1970.10~1974.90MHz 1890.10~1894.90MHz
F & C1 1970.10~1979.90MHz 1890.10~1899.90MHz
Bandwidth Selective Range ADF or ADFC1
Frequency Tolerance ≤5×10-8
Repeater Gain 101dB ± 6%
Output Power 43dBm (downlink)/36dBm(uplink)
F0 ±400KHz: ≤-12dB
Out-Band Rejection
F0 ±2.5MHz: ≤-45dB
Flatness In-Band ≤5dB
Gain Adjustable Range 31dB
Gain Adjustable Step 0~31dB step by 1dB
0dB ~ 10dB: ≤1dB
HARDWARE Gain Adjustable Tolerance 10dB ~ 20dB: ≤1.5dB
20dB ~ 30dB: ≤1.5dB
ALC Auto Level Control
Inter-modulation ≤-45dBc/30KHz
≤-36dBm/100KHz@9kHz~1GHz
Spurious Emission
≤-30dBm/1MHz@1GHz~12.75GHz
Noise Figure ≤5 (Max Gain)
VSWR ≤1.4: 1
Ambient temperature -20°C ~ +55°C
Storage temperature -40°C ~ +85°C
Relative humidity 5%~95%
Air Pressure 70~106kPa
Power Supply* 110VAC ± 15%
Forward Power Detect
PA Enable
General Alarm PA Over Power
PA Over Temperature
SOFTWARE Door Open
VSWR Over Limit (≥2: 1)
PLL Unlock
Serious Alarm DC Power Lost
AC Power Lost
 30.WCDMA Repeater GZF2100-V (40/37/33dBm)

Specification
Specification
Item
Uplink Downlink

Frequency range* 1920~1980MHZ 2110~2170MHZ

Maximum output power 33/30/27±2 dBm 40/37/33±2dBm

Gain ≥96dBm ≥96dBm

Frequency error 20Hz(±0.01ppm)(Max output)

ALC(Auto Level Control) Within 2dB or shut off
Gain adjustment range ≥30dB
Gain adjustment step ≤2dB
≤±1.0dB within 0-20dB
Gain adjustment error
≤±1.5dB within 20-30dB
2.7 ≤f_offset < 3.5 MHz ≤60 dB
Out-band 3.5 ≤f_offset < 7.5 MHz ≤45 dB
suppression 7.5 ≤f_offset < 12.5 MHz ≤45 dB
12.5 MHz ≤f_offset ≤35 dB
Ripple in band ≤2dB/3.84MHz
Noise Figure ≤5dB
Input/output VSWR ≤1.5
Group Delay ≤5μsec
In-band Complied with 3GPP standard
9KHz~150 KHz ≤-36dBm/1 kHz 9KHz~150KHz ≤-36dBm/1 kHz
150 KHz~30MHz ≤-36dBm/10 kHz 150 KHz~30MHz ≤-36dBm/10 kHz
Spurious
Emission 30MHz~1GHz ≤-36dBm/100kHz 30MHz~1GHz ≤-36dBm/100kHz
Normal band
1GHz~1910MHz ≤-30dBm/1 MHz 1 GHz~2100MHz ≤-30dBm/1 MHz
1910MHz~1990MHz ≤-15dBm/1 MHz 2100MHz~2180MHz ≤-15dBm/1 MHz
1990MHz~12.75GHz ≤-30dBm/1 MHz 2180MHz~12.75GHz ≤-30dBm/1 MHz
At the central frequency point, the output increase should not exceed 10dB
Inter- Input IMD
when adding interference signal
modulation
Output IMD - Meet the Spurious Emission requirement
33dB@ ±5MHz
P≥31dBm
ACRR 33dB@ ±10MHz
20dB@ ±5MHz
P<31dBm
20dB@ ±5MHz
EVM ≤12.5% @ Test Model 1 (At max gain)
 PCDE ≤-35 dB @ Test Model 3(At max gain)
Frequency step spacing 200KHz(Max output)
Built-In Power Supply* AC220V±15%
Door, Temperature, Power Supply, Output Power, etc
Monitoring and alarming*
This function need extra GSM terminal per equipment for remote NMS monitoring
Input/output impedance 50Ω
Operating temperature -25 ~ +55℃
Relative humidity ≤95%
Connector N type(Female)

*Note: The star shows this item shall be customized.

 31. WCDMA Optical Repeater GZF2100-IV (40/37/33dBm)

Specification

Specification
Item
Uplink Downlink
Frequency range* 1920~1980MHZ 2110~2170MHZ
Maximum output power 0dBm±2dBm 40/37/33dBm
+3
Maximum Gain 56 − 3 dBm

Frequency error 20Hz(±0.01ppm)(Max output)

ALC(Auto Level Control) Within 2dB or shut off
Gain adjustment range ≥30dB
Gain adjustment step ≤2dB
≤±1.0dB within 0-20dB
Gain adjustment error
≤±1.5dB within 20-30dB
2.7 ≤f_offset < 3.5 MHz ≤60 dB
Out band 3.5 ≤f_offset < 7.5 MHz ≤45 dB
Gain 7.5 ≤f_offset < 12.5 MHz ≤45 dB
12.5 MHz ≤f_offset ≤35 dB
Ripple in band ≤2dB/3.84MHz
Noise Figure ≤5dB
VSWR ≤1.5
Group Delay ≤5μsec
In-band Complied with 3GPP standard

9KHz~150 KHz ≤-36dBm/1 kHz 9KHz~150KHz ≤-36dBm/1 kHz

150 KHz~30MHz ≤-36dBm/10 kHz 150 KHz~30MHz ≤-36dBm/10 kHz
30MHz~1GHz ≤-36dBm/100kHz 30MHz~1GHz ≤-36dBm/100kHz
Spurious 1 GHz~1910MHz ≤-30dBm/1 MHz 1 GHz~2100MHz ≤-30dBm/1 MHz
Emission ≤-15dBm/1 MHz
Normal band 1910MHz~1990MHz ≤-15dBm/1 MHz 2100MHz~2180MHz

≤-30dBm/1 MHz
1990MHz~12.75GHz ≤-25dBm/1 MHz 2180MHz~12.75GHz

≤-36dBm/1 kHz
9KHz~150 KHz ≤-36dBm/1 kHz 9KHz~150KHz

Inter- At the central frequency point, the output increase should not exceed 10dB
Input IMD
modulation when adding interference signal
 Meet the Spurious Emission
Output IMD -
requirement
≥20dBc @ ±5 MHz ≥33dBc @ ±5 MHz
ACRR
≥20dBc @ ±10MHz ≥33dBc @ ±10MHz
EVM ≤12.5% @ Test Model 1 (At max gain)
PCDE ≤-35 dB @ Test Model 3(At max gain)
Frequency step spacing 200KHz(Max output)
Built-In Power Supply* AC220V±15%, -48V±10%
Door, Temperature, Power Supply, Output Power, etc
Monitoring and alarming* This function need extra GSM terminal per equipment for remote NMS
monitoring
Input/output impedance 50Ω
Operating temperature -25 ~ +55℃
Relative humidity 5%~95%
Connector N type(Female)

*Note: The star shows this item shall be customized.