Scribd
Upload
2K views2 pages

Hacking An ATM Machine Is Something That Has Been There For A Very Long Time

Hackeo atmmm

Uploaded by

eduardo
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
2K views2 pages

Hacking An ATM Machine Is Something That Has Been There For A Very Long Time

Hackeo atmmm

Uploaded by

eduardo
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 2

Hacking an ATM machine is something that has been there for a very long

time, currently many ofthe developed countries do have an idea of how it is


done so have taken security measure to preventthat from happening
changing the default configurations and customizing the device.

From the ATM Guideline PDF:

To access the Operator Function menu, hold the <Cancel> <Clear> and <Enter> keys
simultaneously for 2 seconds, release them and press 1, then press 2, then
press 3. The timing of this procedure can be difficult at first.Note: The
Operator Function menu can only be accessed when the machine is either in
service (“ swipe your card“ screen) or out of service. If the machine is
attempting to connect the host or initializing, you will not be able to use the
key commands to access the Operator Function Menu.

“The Denomination is the type of bill that each cassette will be dispensing.
The ATM offers a second cassette as an option. This second cassette can be
programmed to dispense notes, it can also dispense a preset number of bill
sized coupons with each transaction and finally it can dispense a “ value
coupon“ , where you would set the value of the coupon and the customer
could purchase this using their card.To set denomination on the first cassette,
press the First CST Denomination button and then using the main keypad
enter the type of bill. Options are $1, $5, $10, $50and $100.To set
denomination on the second cassette, press the Second CST Denomination
button and then using the main keypad enter the type of bill. Options are $0,
$1,$5, $10, $50 and $100.”

So I guess it is simple and self explanatory, the $1 bill cassette can be


programmed to issue $100 bills. so after the programming, you insert your
ATM card and withdraw $1, the ATM will issue you with a $100 bill and give
you the receipt for a $1 transaction because it will think that it issues only
$1.
To save you from a lot of hustle, these are the default codes to the ATM
machines..

 Master = 555555
 Service = 222222
 Operator = 111111

Rather than risk the illegitimate transaction being linked to the only atm
card I have (mine), here’s why I’ll be on the lookout for a Tranny 1500:

1. Step one: turn off the damn surcharge (pg. 3.23) I hate that
*****.
2. Step two: change greeting (3.25) to something questionably witty
(All your….)
3. Step three: Set fast cash to an extremely high amount. C’mon
people, do you really need to save the extra TEN SECONDS it
takes to complete a full ATM transaction? Is pressing the buttons
aworkout? You suck.
4. Final step: create “value coupon” (3.30) to be received by next
ATM customer for “half off your pwned-ass ATM”

And if you think it’ll take me too long to do this, I’m just going to dress up
as an old person. Those people take forever at the cash machine anyway,
and then I can act senile, too, so it won’t look suspicions when I am trying
the default num-code for the cash box.

You might also like