Scribd
Upload
109 views2 pages

1.atm Security System

The document describes an ATM security system that uses fingerprint and RFID technologies to improve security and prevent forgery. The system requires customers to insert their individual RFID card and place their fingerprint on a sensor. If both the card number and fingerprint match the stored records, the ATM access is granted. Otherwise, an alert is sent via GSM to the customer's registered mobile number requiring them to enter a password via the ATM keypad. This additional verification step aims to prevent unauthorized access to the ATM.

Uploaded by

Crisp
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
109 views2 pages

1.atm Security System

The document describes an ATM security system that uses fingerprint and RFID technologies to improve security and prevent forgery. The system requires customers to insert their individual RFID card and place their fingerprint on a sensor. If both the card number and fingerprint match the stored records, the ATM access is granted. Otherwise, an alert is sent via GSM to the customer's registered mobile number requiring them to enter a password via the ATM keypad. This additional verification step aims to prevent unauthorized access to the ATM.

Uploaded by

Crisp
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
You are on page 1/ 2

ATM SECURITY SYSTEM

Objective:

The objective of this project is to improve the security performance in the


highly secured areas by using finger print, RFID and GSM. This project is designed to use the
finger print and RFID application in the ATM.

Scope:

In this project RFID card is used as ATM card. Now day’s some person makes
the duplicate ATM card. But in this project individual RFID card is used. So this project
improves the security performance and avoid forgery because we cannot make the duplicate
RFID card.

In this project human finger print is also used for ATM access. So this project improves
the security performance and avoid forgery because naturally one human finger print is different
from other human.

Brief methodology:

The Customer has to enter his/her RF ID card and finger print while accessing the ATM
card. RFID is the special type wireless card which has inbuilt the embedded chip along with loop
antenna. The inbuilt embedded chip represents the 12 digit card number.

RFID reader is the circuit which generates 125KHZ magnetic signal. This magnetic signal is
transmitted by the loop antenna connected along with this circuit which is used to read the RFID
card number.

In this project RFID card is used as ATM card. So each customer has the individual RFID card
which represents the ATM ID number. RFID reader is interfaced with microcontroller. RF id
reader is always waiting for a card.

When the customer show the RF ID card in front of reader. In PC we have already
stored the RFID card number. When the customer shows the RFID card in the reader, the reader
will read the number and send to microcontroller. The microcontroller received the card number
from the reader and send it to compares the stored number if the card is valid the microcontroller
displays the “Enter your Finger” on the LCD display. Now the customer can places the finger on
the finger print sensor, the sensor sends the corresponding data to microcontroller.
Microcontroller received the data from the finger print sensor. Then compared with stored data if
the person finger is valid for that student name mentioned in the student ID card, then the
attendance will be noted in PC data base. If the person finger print is not valid for that particular
voter name, the microcontroller will display the “Authentication Fail “on the LCD display and
also send the alert to PC. In pc we have connected a GSM modem or mobile phone. PC will
command the mobile to send password as SMS for that particular mobile number which is
already stored in PC data base. We need a data based(back end) software and front end software
to implement this project in real time. This Password is entered through keypad, if the password
is correct the ATM is accessed if wrong password is entered Alarm is switched ON.

BLOCK DIAGRAM

LCD

Finger print Rs232 Mobile


ARM
sensor processor ckt

Micro
controller Driver Relay
RF ID RF ID
reader card

Alarm

Keypad

You might also like