PVC-U Window and Door Systems

The Total solution for Specifiers

UK & IRELAND SALES OFFICES

London, REHAU Ltd, The Building Centre, 26 Store Street, London WC1E 7BT Phone: 0207 580 6155 Fax: 0207 307 8595 Slough, Units 5 J & K, Langley Business Centre,
Station Road, Langley, Slough SL3 8DS Phone: 01753 588500 Fax: 01753 588501 Manchester, Brinell Drive, Irlam, Manchester M44 5BL Phone: 0161 777 7400
Fax: 0161 777 7401 Glasgow, Phoenix House, Phoenix Crescent, Strathclyde Business Park, Bellshill, North Lanarkshire ML4 3NJ Phone: 01698 503700 Fax: 01698 503701
Dublin, 9 St. Johns Court, Business Park, Swords Road, Santry, Dublin 9 Phone: 00353 (0)1 8165020 Fax: 00353 (0)1 8165021

This document is protected by copyright. All rights based on this are reserved. No part of this publication may be translated, reproduced or transmitted in any form or by any
similar means, electronic or mechanical, photocopying, recording or otherwise, or stored in a data retrieval system.

www.rehau.co.uk 700.781EN/017/E&T/08.10 www.rehau.co.uk Building Solutions

Automotive
Industry
PVC-U window and door systems
THE TOTAL SOLUTION FOR SPECIFIERS

Contents
1. . . . . . . Building The Future With Advanced Polymer Systems . . . . . . . . . . . . 5 The Choice for PVC-U Profiles
1.1 . . . . . . Three Principles of Energy Efficiency . . . . . . . . . . . . . . . . . . . . 7 REHAU’s extensive product range
offers a great variety of window, door,
1.2 . . . . . . REHAU Environmentally Friendly and Energy Efficient Products . . . . . . . . . . 8
conservatory and curtain walling systems,
1.3 . . . . . . REHAU Renewable Energy . . . . . . . . . . . . . . . . . . . . . . . . 10 all of which are displayed in this brochure.
1.4 . . . . . . REHAU as a Premium Brand - Quality as a Unity Factor . . . . . . . . . . . . . 12
1.5 . . . . . . REHAU Academy - Theory and Practical Training Courses . . . . . . . . . . . . 14 The details given about each product
are designed to enable you to select
2. . . . . . . PVC-U Window Systems . . . . . . . . . . . . . . . . . . . . . . . . . 16 the system most suitable for your
requirements.
2.1 . . . . . . Casement Windows - REHAU S706 70mm . . . . . . . . . . . . . . . . . . 16
2.2 . . . . . . Casement Windows - REHAU Tritec 60mm . . . . . . . . . . . . . . . . . . 18 Once you have chosen the system one
2.3 . . . . . . Tilt/turn Windows - REHAU S706 70mm . . . . . . . . . . . . . . . . . . . 20 of our Commercial Sales Managers
2.4 . . . . . . Tilt/turn Windows - REHAU Tritec 60mm . . . . . . . . . . . . . . . . . . . 21 can provide all the necessary technical
2.5 . . . . . . Fully Reversible Windows - REHAU S706 70mm . . . . . . . . . . . . . . . . 22 information in order to produce a full
2.6 . . . . . . Pivot Windows - REHAU Tritec 60mm . . . . . . . . . . . . . . . . . . . . 24 specification. Contact details including
the areas covered by each of our Sales
2.7 . . . . . . Vertical Sliding Windows - REHAU Heritage . . . . . . . . . . . . . . . . . . 26
Offices can be found at the back of this
brochure.
3. . . . . . . PVC-U Door Systems . . . . . . . . . . . . . . . . . . . . . . . . . . 28
3.1 . . . . . . Residential Doors - REHAU S706 70mm . . . . . . . . . . . . . . . . . . . 28
3.2 . . . . . . Residential Doors - REHAU Tritec 60mm . . . . . . . . . . . . . . . . . . . 30
3.3 . . . . . . French Doors - REHAU S706 70mm and REHAU Tritec 60mm . . . . . . . . . . 32
3.4 . . . . . . Tilt/Slide Patio Doors - REHAU S706 70mm and REHAU Tritec 60mm . . . . . . . 34
3.5 . . . . . . In-Line Patio Doors - REHAU S717 . . . . . . . . . . . . . . . . . . . . . 36
3.6 . . . . . . Multi-Fold Doors - REHAU S706 70mm and REHAU Tritec 60mm . . . . . . . . . 38
3.7 . . . . . . REHAU S706 RAUFERNO - Fire Rated PVC-U Doors and Windows . . . . . . . . 40

4. . . . . . . Conservatories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42

5. . . . . . . REHAU Polytec 50S Curtain Walling . . . . . . . . . . . . . . . . . . . . 44

6. . . . . . . Colours and Finishes . . . . . . . . . . . . . . . . . . . . . . . . . . 46

7. . . . . . . REHAU Underfloor Heating . . . . . . . . . . . . . . . . . . . . . . . . 48

8. . . . . . . Data Cable Management Systems . . . . . . . . . . . . . . . . . . . . 49

9. . . . . . . REHAU Window and Door Summary . . . . . . . . . . . . . . . . . . . . 50

3
REHAU 1.
building the future with advanced polymer systems

1 Head office, Ross-on-Wye

2 Blaenau Factory

1 2

REHAU are a global manufacturer of energy efficient building

solutions.
We bring innovative ideas from around the world to Along with two UK manufacturing plants, REHAU
illustrate how commercial applications can comply has a Head Office in Ross-on-Wye and regional
with the latest building regulations and sustainability offices in Slough, Manchester, Glasgow and
codes while, at the same time, minimising costs. Dublin. We are also supported by a Specification
Centre in the London Building Centre. Through
Best known in the UK for the manufacture of the REHAU Academy, staff and Authorised
windows and curtain walling systems, REHAU Partners are trained to give full support to clients,
offers renewable energy solutions such as ground specifiers and contractors.
source energy. We also provide underfloor heating
and cooling systems, district heating, plumbing Our team of Commercial Sales Managers provide
and data cable management systems. REHAU’s a specialised service to architects, consultants,
comprehensive range is ideal for fast, efficient and surveyors etc providing assistance with:
cost-effective installation in all types of buildings.
- Project feasibility studies
Formed in 1948, REHAU prides itself on its - Building regulation and British standard
technical expertise and is investing substantial compliance
resource on research and development for
- CAD detailing
innovative solutions for the commercial sector.
- Project specific specification development
The company’s outstanding reputation in this
market has been built not only on the quality of its - On-site project support
products but also on the value of the service and
technical advice we have provided to construction A truly global business, REHAU operates from
projects for over 40 years. 170 locations worldwide with more than 15,000
employees.

5
REHAU 1.
THREE PRINCIPLES OF ENERGY EFFICIENCY 1.1

With innovative developments for window and curtain walling

systems, heating and plumbing solutions as well as civil engineering
applications, REHAU significantly influences the construction market.
In this respect our main focus lies on Energy Efficiency, Water
Management and Infrastructure Solutions.

The holistic REHAU approach to energy efficient building solutions

is not just limited to renewable energy solutions. The perfect
combination between thermal insulation and heating and cooling
solutions minimises energy losses, reduces energy costs and
significantly cuts CO2 emissions.

Energy efficiency stands for our future.

We offer solutions which are sustainable and cost effective. REHAU Building Solutions and our project
support and design advice follows the three principles of energy efficiency:

Reduce Energy Losses

Window and Curtain Walling Systems with optimum thermal insulation standards enables energy losses
to be minimised through the building fabric for new build as well as refurbishment projects.

Distribute Energy Efficiently

Innovative surface heating and cooling solutions increase the comfort level of the occupants and reduces
the energy consumption.

Generate Energy Efficiently

With the move away from gas, alternative heat sources need to be applied. The use of water and air based
ground source solutions will provide a significant part of our energy generation mix.

The following pages will provide an overview of our wide range of REHAU Building Solutions. However, the
main focus of this specification guide is on our window, door and curtain walling systems, the added value and
design support we and our REHAU Authorised Partners can bring to your project.

7
1. REHAU
1.2 ENVIRONMENTALLY FRIENDLY AND ENERGY EFFICIENT PRODUCTS

2
1

5 4

1 REHAU Window and Door Systems

2 REHAU Curtain Walling Systems
3 REHAU Underfloor Heating
4 REHAU Heating and Plumbing
5 REHAU Ground Air Heat Exchanger
6 REHAU Ground Source Solutions
7 REHAU District Heating

5 6 7

8
REHAU Window and Door Systems REHAU Ground-Air Heat Exchanger
Energy Efficient Window and Door Systems up to The ground-air heat exchanger AWADUKT Thermo
Passive House Standard with an Uw-Value of exploits the energy stored in the ground. At a depth
0.8 W/m2K reduce energy losses through the of 1.5m the ground is a constant 7 – 12ºC.
building fabric and enable increased glazed areas By drawing air through an underground network of
to maximise the use of natural daylight. pipes it provides a source of fresh air for the building,
pre-heated in winter operation and pre-cooled in
REHAU Curtain Walling Systems summer operation at minimal running costs.
The thermal characteristics of the composite curtain
walling system REHAU Polytec 50S make it the REHAU Ground Source Solutions
ideal solution for large glazed areas on domestic Ground source heat pumps become more and more
as well as commercial projects (U f-Value up to popular in the UK market, as they offer reduced
0.88 W/m2K). The aesthetics of 50mm slim sight energy and CO2 emissions to heat and cool a building
lines and powder coated aluminium cover caps by extracting energy from the ground. REHAU offer
together with the structural strength of box steel a wide range of system solutions from vertical
sections allow architects a vast design freedom. probes, energy piles, spiral probes and horizontal
collectors. Therefore being able to offer the most
REHAU Underfloor Heating suitable solution for every application. All based on
REHAU underfloor heating systems and intelligent high performance PE-Xa material with a 10 year
controls provide cost effective comfort and safety in consequential loss guarantee.
a variety of installation options. REHAU underfloor
heating systems deliver the right amount of heat in REHAU District Heating
the right place at the right time. It can also be used There is a growing trend for remote energy centres,
for cooling to future proof the building. often using renewable heat sources such as ground-
source, biomass or combined heat and power (CHP)
REHAU Heating and Plumbing plants. These offer an efficient heating solution but
REHAU EVERLOCTM heating and plumbing system they are situated away from the main buildings.
is the ideal solution for hot and cold water, central
heating and underfloor heating solutions. The In locating the energy centre separate from the main
REHAU EVERLOCTM heating and plumbing system buildings, it is important to ensure that minimal heat
is an integrated range of reliable and high quality is lost between the energy centre and the building.
flexible polymer pipes and brass fittings. Our 10 year
consequential loss guarantee increased the popularity. RAUTHERMEX PE-Xa pre-insulated pipe offers
excellent thermal insulation and temperature
resistance up to 95ºC.

CD-Rom containing all information on our

energy saving products is available from
your regional Sales Office.

9
1. REHAU RENEWABLE ENERGY
1.3 environmentally friendly and energy efficienT

REHAU understands that today’s consumers are looking for

properties that enhance their quality of life while reducing energy
costs and CO2 emissions. But it’s not just about picking one or two
high performance products. While each product yields sustainable
benefits on its own, only successful integration can optimise
performance and minimise operation costs.

Our goal is to design integrated systems that enhance advice follow the three principles of energy efficiency
quality of life while conserving resources throughout the starting with reduction in energy losses, make
product life cycle. REHAU provides reliable, long lasting optimal use of energy and efficiently generate energy.
product solutions that address sustainable design priorities
such as energy efficiency, comfort, health and safety. Thanks to the outstanding insulation properties
of REHAU window, door and curtain walling
With the innovative systems offered by REHAU the systems, the most important step of reducing
zero carbon home is no longer merely a utopian energy losses can be achieved for both new build
fantasy. REHAU’s Building Solutions and design and refurbishment.

10
The Environment
REHAU has championed solutions for environmentally
friendly window and door products for many years.
We manufacture in accordance with BS EN ISO
14001 and recycle 80% of manufacturing off cuts
into new profiles. In addition, REHAU is working with
BRE to further minimise environmental impact of
manufacturing process.

BRE Green Guide

The environmental benefits of REHAU window and
door systems are supported by the BRE Green Guide
with an A Rating for residential and an A+ Rating for
commercial applications. Designers and consultants
can therefore maximise the performance of their
building project in regards to Code for Sustainable
Homes or BREEAM Rating. Another important factor
in this respect is the thermal performance with
Uw-Values for the whole window element of up to 0.8
W/m2K. Minimising the energy losses through the
building fabric making REHAU solutions suitable for
up to Code Level 6 or Passive House Developments.

Window Energy Rating

REHAU has been continually involved in thermal
efficiency of its windows and with window energy
ratings to ensure that our window systems and
therefore our customer base is well prepared for the Energy Saving Trust
future. REHAU Tritec 60mm and REHAU S706/Edge Currently C rated windows or better are included
70mm window systems are able to easily achieve A in the Energy Saving Trust scheme “Energy
ratings with double glazed units. All this is possible Saving Recommended”*. The “Energy Saving
without compromising on security or structural Recommended” certification mark was developed
performance. by the Energy Saving Trust to distinguish the most
energy efficient products on the market. Only
After extensive evaluation and development work products that meet the strict requirements will
REHAU has been able to achieve even higher thermal be endorsed and given the certification mark.
performance with REHAU’s S706 using a patented This logo is widely known to the public and used
thermal sleeve solution. This enables customers to by REHAU Authorised Partners to promote REHAU F or more information please consult
achieve higher U values and better window energy Window Solutions. our Energy Efficiency Brochure ref.
ratings without the need for expensive glass or triple 710.712EN/122.
glazed units. *It is expected to increase to B rated windows by 2011

11
1. REHAU as a premium brand
1.4 quality as a unity factor

Red areas indicate high heat loss. PVC-U

double glazed windows can help reduce
this loss.

Design Life and Recyclability Approvals

With an expected design life of in excess of 35 REHAU window and door systems, manufactured
years and the capability of recycling of all PVC parts using approved profiles extruded within ISO 9001
at the end of the service life, REHAU windows and Quality Management System in accordance with the
doors play a significant part in delivering a reliable requirements of BS EN 12608 (BSI Kitemark License
and sustainable future. KM 13358) and registered with BBA (Report No’s
1930, 1108 and 1309), have been type tested and
Third party
REHAU Tritec S706 REHAU Heritage certified to performance standards:
Approvals

n n n - BS 7412 - Specification for window and door sets

made from PVC-U

n n n - BS EN 14351-1 - Windows and doors – product

standard, performance characteristics
ASSESSED WINDOW SYSTEMS
REHAU-TRITEC, S706 AND S719

- BS 7950 - Specification for enhanced security

For detailed information of the elements of each profile covered
performance of windows
and nature of that cover please ask for our Test Reports.
- PAS 23 - General performance requirement for
door assemblies
- PAS 24 - Enhanced security performance
requirements for door assemblies.
- Secured By Design – UK wide police initiative to
encourage the adoption of Crime Prevention
measures covering a range of specific risk
technology. This status is held by a number of
our fabricators.

12
Building Regulations Material Properties
REHAU systems comply with the relevant Building REHAU systems are fabricated using profiles extruded
Regulations including Part L (England and Wales) from our own formulation, RAU-PVC 1406, which
and Part J (Scotland) - Conservation of Fuel and is impact modified and weather rated to the most
Power. The table below provides a guide to the onerous requirements within BS EN 12608 – Severe
regulations applicable to REHAU systems. rating. This means that they are durable and will keep
their looks for many years whatever the weather
REHAU Commercial Sales Managers will be able throws at them.
to help you with any further details you require
regarding REHAU systems and Building Regulations.

Cleaning and Maintenance

PVC-U can be cleaned with warm water, a gentle
household detergent and a soft cloth.

Specific maintenance requirements, especially for

finished products, fittings and hardware as issued by
manufacturers and fabricators, should be observed.
P
L
O
IA

L
IC

IC
FF

E
O
SE

E
V
C

TI
U

IA
R

IT
IT

ASSESSED WINDOW SYSTEMS

IN
Y

REHAU-TRITEC, S706 AND S719

BS EN 12608 www.securedbydesign.com

KM 13358

Approvals and Building Regulations

Subject England and Wales Scotland Northern Ireland

Fire Safety Part B Part E Part E
Resistance to moisture Part C Part G Part C
Resistance to the passage of sound Part E Part H Part G
Ventilation Part F Part K Part K
Conservation of Fuel and Power Part L Part J Part F
Access for disabled people Part M Part Q Part R
Glazing Safety Part N Part P Part V

13
1. REHAU Academy
1.5 Theory and Practical Training courses

14
The REHAU Academy offers training courses for all our system solutions, ranging from one-day
introduction courses to two-day installation and design courses. Our Academy is based at our Head
Office in Ross-on-Wye. We also offer Academy Courses at our regional Sales Offices or if required
on site at your premises.

The REHAU Academy forms an integral part of becoming an approved REHAU Authorised Partner, therefore
ensuring that REHAU systems are designed and installed in the best possible way.

The services we provide also help architects, consultants and specifiers to become more successful in their
market place. Our aim is to provide knowledge which will enable them to showcase their expertise to their
clients and demonstrate their abilities to provide a total solution.

In addition to the scheduled training courses, regional events are organised by our regional Sales Offices
to launch new products and inform about changes relevant to the UK market like Building Regulations,
Standards or Funding.

REHAU also offer RIBA and CIBSE approved CPD Seminars which can be arranged at your premises
on request.

Please contact one of our Commercial Managers, regional Sales Office or visit www.rehau.co.uk/company/
academy/academy.shtml to get further information and book your place on the next course or event of
interest to you.

15
2. PVC-U Window Systems
2.1 Casement windows – REHAU S706 70mm

Key Characteristics Appearance

- Ideal replacement for British timber casement - Available in White, Mahogany, Rosewood and Golden
windows due to 70mm depth Oak on White, Mahogany, Rosewood and Golden Oak
- Choice of chamfered profiles using REHAU S706 or both sides as standard
fully sculptured using the REHAU Edge system - For other non-standard laminate options and the
- Optional aesthetic features include run through sash range of RAL colours available using our Acryl II
horns, arched head inserts, clip-on georgian bars and colour system please refer to page 46.
low level glazing beads and gasket
Reinforcement
- Available with or without integral gaskets
- Totally separate reinforcement chambers in profiles
- French window style available
enables galvanised steels to be inserted for additional
- Compatible with fully reversible, entrance doors, strength when required
in-line tilt/slide patio and Multi-Fold doors
- For more information please consult our
- Can be incorporated into conservatory designs Reinforcement Guidelines ref. 700.620E.
- Full range of supplementary profiles available to suit and 706.695EN.
all installation requirements
- Able to achieve a BFRC ‘A’ Rating with standard and
full reinforcement.

16
 1 Patented Thermal Sleeve.
Insulation
- Complies with the requirements of the Building REHAU S706 Approvals
- BS EN 12608 (BS 7412) KM 13358
Regulations covering Conservation of Fuel and Power
- BS 7950 KM 76189
- Part L (England and Wales) and Part J (Scotland)
- PAS 23/24 KM 66461
when glazed using the correct type of sealed unit - BBA Report No’s 1108 and 1309
- Can achieve an enhanced thermal performance
through using the REHAU patented thermal sleeve*
- Sound insulation is dependent on glazing
specification. For more information please consult 1
one of our Commercial Sales Managers.

Fittings and Hardware Glazing

The REHAU S706 and REHAU Edge systems can - 4mm to 42mm double glazing
accommodate: - Internal or external glazing
- A wide range of friction stays including - Dry glazing with glazing bead and gasket or a
egress hinges co-extruded glazing bead
- Both espagnolette and shootbolt locking mechanisms - Low level glazing option available
- Manufacturers recommendations on maintenance - A security glazing gasket can be used for
should be followed. extra security.

Outward opening side hung Outward opening top hung

Maximum Sash Sizes Maximum Maximum

Sash Finish WxH cm m2 kg WxH cm m2 kg
Sash Z White 90x150 1.28 40 120x120 1.44 40
Sash T White 90x150 1.28 40 120x120 1.44 40
Sash Z Coloured/Foiled 90x150 1.28 40 120x120 1.44 40
Sash T Coloured/Foiled 90x150 1.28 40 120x120 1.44 40

These sizes are for guidance only and are dependent on fittings and hardware used.
Please consult REHAU for more detailed information.

* See BFRC Guide Energy Efficient windows and

doors for further information

17
PVC-U Window Systems 2.
Casement windows – REHAU S706 70mm 2.1

70mm Casement window - S706 70mm Casement window - REHAU Edge

Internally beaded chamfered sash Internally beaded sculptured sash

Slim outer frame

Slim outer frame Slim outer frame
Slim outer frame
42x10 42x10 42x10 42x10
Art. No. 546075
Art. No. 546075 Art. No. 546645
Art. No. 546645 Reinforcement
Reinforcement
Reinforcement
Reinforcement
Art. No. 261748
Art. No. 261748 Art. No. 261748
Art. No. 261748
99

99

99

99
20x35x20x1920x35x20x19 20x35x20x1920x35x20x19
Reinforcement
Reinforcement Reinforcement
Reinforcement
Casement T Casement
sash T sash Art. No. 261968
Art. No. 261968 Casement T Casement
sash T sash
Art. No. 261968
Art. No. 261968
Art. No. 546106
Art. No. 546106 Art. No. 546685
Art. No. 546685

18.5mm 18.5mm 18.5mm 18.5mm

Glazing beadGlazing bead Glazing beadGlazing bead
Art. No. 546131
Art. No. 546131 Art. No. 546571
Art. No. 546571

20x35x20x19 20x35x20x19 Casement T Casement

sash T sash 20x35x20x19 20x35x20x19 Casement T Casement
sash T sash
Reinforcement
Reinforcement Reinforcement
Reinforcement
Art. No. 546106
Art. No. 546106 Art. No. 546685
Art. No. 546685
Art. No. 261968
Art. No. 261968 Art. No. 261968
Art. No. 261968
116

116

116

116

Z Transom 69mm
Z Transom 69mm
Z Transom 69mm
Z Transom 69mm
42x10 Reinforcement
42x10 Reinforcement Art. No. 546095
Art. No. 546095 42x10 Reinforcement
42x10 Reinforcement Art. No. 546675
Art. No. 546675
Art. No. 261748
Art. No. 261748 Art. No. 261748
Art. No. 261748

18.5mm 18.5mm 18.5mm 18.5mm

Glazing beadGlazing bead Glazing beadGlazing bead
Art. No. 546131
Art. No. 546131 Art. No. 546571
Art. No. 546571

42x10 Reinforcement
42x10 Reinforcement 42x10 Reinforcement
42x10 Reinforcement
Art. No. 261748
Art. No. 261748 Slim outer frame
Slim outer frame
Slim outer frame
Slim outer frame Art. No. 261748
Art. No. 261748
Art. No. 546645
Art. No. 546645
52

52

52

52

Art. No. 546075

Art. No. 546075 150mm sill 150mm sill
150mm sill 150mm sill
Art. No. 246330
Art. No. 246330 Art. No. 246330
Art. No. 246330

30x20 30x20
reinforcing reinforcing
Art. No. 255924
Art. No. 255924 30x20 reinforcing
30x20 reinforcing
Art. No. 255924
Art. No. 255924

DETAILED DRAWINGS ARE AVAILABLE ON REQUEST

17
REHAU S706 70MM
CASEMENT WINDOWS
2. PVC-U Window Systems
2.2 Casement Windows – REHAU tritec 60mm

Key Characteristics
- A versatile system offering the benefits of slim
sight-lines
- Choice of chamfered or sculptured sashes
- French window style available
- Optional aesthetic features include run through
sash horns, arched head inserts, and clip-on
georgian bars
- Available with or without integral gaskets
- Compatible with tilt/turn and pivot windows,
entrance doors, in-line tilt/slide patio and
Multi-Fold doors
- Can be incorporated into conservatory designs
- Full range of supplementary profiles available to
suit all installation requirements
- Able to achieve a BFRC ‘A’ Rating with standard
and full reinforcement.

Appearance
- Available in White, Mahogany, Rosewood and
Golden Oak on White, Mahogany, Rosewood and
Golden Oak both sides as standard
- F or other non-standard laminate options and the
range of RAL colours available using our Acryl II
colour system please refer to page 46.

Reinforcement
- Totally separate reinforcement chambers in
profiles enables galvanised steels to be inserted
for additional strength when required
- For more information please consult our
Reinforcement Guidelines ref. 700.620E.
and 703.695EN.

18
 1 Golden Oak casement window with
Insulation arched head insert
-C omplies with the requirements of the Building
Regulations covering Conservation of Fuel and Power REHAU Tritec Approvals
- BS EN 12608 (BS 7412) KM 13358
- Part L (England and Wales) and Part J (Scotland)
- BS 7950 KM 76189
when glazed using the correct type of sealed unit
- PAS 23/24 KM 66461
- Sound insulation is dependent on glazing - BBA Report No. 1930
specification. For more information please consult 1
one of our Commercial Sales Managers.

Fittings and Hardware Glazing

The REHAU Tritec system can accommodate: - 4 mm to 32mm glazing
- A wide range of friction stays up to a 17mm - Internal or external glazing
stack height - S ilver grey gasket with white profiles and like
- Both espagnolette and shootbolt locking coloured gasket with mahogany, rosewood and
mechanisms golden oak are less obtrusive
- Manufacturers recommendations on maintenance - Dry glazing with glazing bead and gasket or a
should be followed. co-extruded glazing bead
-C
 hoice of sloped or sculptured beads
- L ow level glazing option available
- A security glazing gasket can be used if required.

Outward opening side hung Outward opening top hung

Maximum Sash Sizes Maximum Maximum

Sash Finish WxH cm m2 kg WxH cm m2 kg
Sash Z White 90x160 1.2 40 120x120 1.0 40
Sash T White 90x160 1.2 40 120x120 1.0 40
Sash Z Coloured/Foiled 90x160 1.0 40 120x120 1.0 40
Sash T Coloured/Foiled 90x160 1.0 40 120x120 1.0 40

These sizes are for guidance only and are dependent on fittings and hardware used.
Please consult REHAU for more detailed information.

19
PVC-U Window Systems 2.
Casement Windows – REHAU tritec 60mm 2.2

60mm Casement window 60mm Casement window

Internally beaded sculptured sash Internally beaded chamfered sash

35x12x1.5mm
35x12x1.5mm
Outer
OuterFrame
Frame52mm
52mm Reinforcement
Reinforcement 35x12x2mm
35x12x2mm
Art.
Art.No.
No.503535
503535 Outer
OuterFrame
Frame52mm
52mm Reinforcement
Reinforcement
Art.
Art.No.
No.287798
287798 Art.
Art.No.
No.503535
503535
Art.
Art.No.
No.233711
233711

30.5x24x1.5mm
30.5x24x1.5mm 30.5x23x1.5mm
30.5x23x1.5mm
Reinforcement
Reinforcement Reinforcement
Reinforcement
94
94

100
100
Art.
Art.No.
No.287813
287813 Casement
Casementsash
sashT T76mm
76mm Art.
Art.No.
No.287806
287806
Casement
Casementsash
sashT T70mm
70mm Art.
Art.No.
No.503425
503425
(Sculptured)
(Sculptured)
Art.
Art.No.
No.503435
503435

14.5mm
14.5mm
14.5mm
14.5mm Glazing
Glazingbead
bead
Glazing
Glazingbead
bead
Art.
Art.No.
No.503451
503451
Art.
Art.No.
No.503451
503451

Casement
Casementsash
sashT T70mm
70mm Casement
Casementsash
sashT T76mm
76mm
(Sculptured)
(Sculptured)
Art.
Art.No.
No.503425
503425
Art.
Art.No.
No.503435
503435

30.5x24x1.5mm
30.5x24x1.5mm 30.5x23x1.5mm
30.5x23x1.5mm 35x12x1.5mm
35x12x1.5mm
118
118

Reinforcement
Reinforcement 35x12x1.5mm
35x12x1.5mm Reinforcement
Reinforcement
112
112

Reinforcement
Reinforcement
Art.
Art.No.
No.287813
287813 Reinforcement
Reinforcement
Art.
Art.No.
No.287806
287806 Art.
Art.No.
No.287798
287798
Art.
Art.No.
No.287798
287798

Z ZTransom/Mullion
Transom/Mullion70mm
70mm Z ZTransom/Mullion
Transom/Mullion70mm
70mm
14.5mm
14.5mm Art.
Art.No.
No.503565
503565
Art.
Art.No.
No.503565
503565 Glazing
Glazingbead
bead
Art.
Art.No.
No.503451
503451 14.5mm
14.5mm
Glazing
Glazingbead
bead
Art.
Art.No.
No.503451
503451
52
52

52
52

150mm
150mmSillSill
95mm
95mmSillSill
Art.
Art.No.
No.503920
503920 30x20x2mm
30x20x2mm
Art.
Art.No.
No.503910
503910 30x20x2mm
30x20x2mm
Reinforcement
Reinforcement Reinforcement
Reinforcement
Art.
Art.No.
No.255924
255924 Art.
Art.No.
No.255924
255924

DETAILED DRAWINGS ARE AVAILABLE ON REQUEST

19
REHAU Tritec 60MM
CASEMENT WINDOWS
2. PVC-U Window Systems
2.3 TILT/TURN Windows – REHAU S706 70mm

Key Characteristics Insulation

-C
 hoice of chamfered profiles using REHAU S706 - Complies with the requirements of the Building
or fully sculptured using the REHAU Edge system Regulations covering Conservation of Fuel and Power
- B oth systems offer extremely slim sight-lines and - Part L (England and Wales) and Part J (Scotland
enhanced aesthetic appeal when glazed using the correct type of sealed unit
- Inward opening for effective fire escape, easy - Sound insulation is dependent on glazing
cleaning and where restricted space outside specification. For more information please consult
makes outward opening hazardous one of our Commercial Sales Managers.
- F ull range of supplementary profiles available to
Fittings and Hardware
suit all installation requirements.
- 16mm eurogroove ensures maximum choice of
standard fittings, some of which include the tilt
Appearance
before turn option as well as restrictors
- Available in White, Mahogany, Rosewood and
Golden Oak on White, Mahogany, Rosewood and - Manufacturers recommendations on maintenance
Golden Oak both sides as standard should be followed.
- For other non-standard laminate options and the
Glazing
range of RAL colours available using our Acryl II
- 4mm to 42mm glazing
colour system please refer to page 46.
- Internally glazed
Reinforcement - Glazing depth can be extended to 42mm for triple
-G
 alvanised steel reinforcement for sashes over glazing using a special bead
1100mm wide by 1100mm high - Dry glazing with glazing bead and gasket or a
- F or more information please consult our co-extruded glazing bead.
Reinforcement Guidelines ref. 700.620E.
and 706.695EN.

Tilt/Turn

Maximum Sash Sizes Maximum

Sash Finish WxH cm m2 kg
Sash Z White 120x150 1.8 60
Sash Z Coloured/Foiled 120x150 1.8 60

These sizes are for guidance only and are dependent on fittings and hardware used.
Please consult REHAU for more detailed information.

20
PVC-U Window Systems 2.
TILT/TURN Windows – REHAU tritec 60mm 2.4

Key Characteristics Fittings and Hardware

- Chamfered sash and outer frame provide extremely - 1 6mm eurogroove ensures maximum choice of
slim sight-lines and enhanced aesthetic appeal standard fittings, some of which include the tilt
- Inward opening for effective fire escape, easy before turn option as well as restrictors
cleaning and where restricted space outside -M
 anufacturers recommendations on maintenance
makes outward opening hazardous should be followed.
- Full range of supplementary profiles available to
suit all installation requirements. Glazing
- 4 mm to 32mm glazing
Appearance - Internally glazed
- Available in White, Mahogany, Rosewood and -G
 lazing depth can be extended to 42mm for triple
Golden Oak On White, Mahogany, Rosewood and glazing using a special bead
REHAU S706 Approvals
Golden Oak both sides as standard
- S ilver grey gasket with White profiles and like - BS EN 12608 (BS 7412) KM 13358
- For other non-standard laminate options and the coloured gasket with Mahogany, Rosewood and - BS 7950 KM 76189
range of RAL colours available using our Acryl II Golden Oak are less obtrusive - PAS 23/24 KM 66461
colour system please refer to page 46. - BBA Report No’s 1108 and 1309
- Dry glazing with glazing bead and gasket or a
co-extruded glazing bead REHAU Tritec Approvals
Reinforcement
-C
 hoice of sloped or sculptured beads - BS EN 12608 (BS 7412) KM 13358
- Galvanised steel reinforcement for sashes over - BS 7950 KM 76189
800mm wide by 800mm wide - L ow level glazing option available - PAS 23/24 KM 66461
- For more information please consult our - A security glazing gasket can be used if required. - BBA Report No. 1930

reinforcement guidelines ref. 700.620E.

and 703.695EN.
Tilt/Turn
Insulation
-C omplies with the requirements of the Building
Regulations covering Conservation of Fuel and Power
- Part L (England and Wales) and Part J (Scotland) Maximum Sash Sizes Maximum
when glazed using the correct type of sealed unit Sash Finish WxH cm m2 kg
- Sound insulation is dependent on glazing Large Sash Z White 150x170 2.1 100
Slim Sash Z White 100x150 1.3 40
specification. For more information please consult
Large Sash Z Coloured/Foiled 150x170 2.1 100
one of our Commercial Sales Managers. Slim Sash Z Coloured/Foiled 100x150 1.3 40

These sizes are for guidance only and are dependent on fittings and hardware used.
Please consult REHAU for more detailed information.

21
PVC-U Window Systems 2.
TILT/TURN Windows – REHAU S706 70mm 2.3
TILT/TURN Windows – REHAU tritec 60mm 2.4

35x35x1.5mm
70mm Tilt & Turn 70mm Sash 60mm Tilt & Turn 72mm Sash Reinforcement
Art. No. 287799
Internally beaded chamfered sash Internally beaded chamfered sash

Outer Frame 62mm

135.5
42x10 Reinforcement Outer frame 62mm 35x22x2mm
Art. No. 546605 Reinforcement Art. No. 503545
Art. No. 261748
Art. No. 200023
42x9.8 Reinforcement
Art. No. 232822
18x40x18 35x21.5x1.5mm
Reinforcement Reinforcement Tilt & turn sash

106
104

Art. No. 287814 Z 88.5mm

Art. No. 287779
Art. No. 503835
Tilt & turn sash
Tilt & turn sash profile Z Z 72mm
Art. No. 546776 Art. No. 503845

Tilt & turn sash

Z 88.5mm
14.5mm Art. No. 503835
18.5mm
Glazing bead Glazing bead
Art. No. 546131 Tilt & turn sash Z 72mm Art. No. 503451
Weather rail
Tilt & turn sash profile Z Art. No. 503845
35x21.5x1.5mm Art. No. 561510
Art. No. 546776
Reinforcement
Art. No. 287814
Weather rail
18x40x18 Weather rail
Art. No. 561510 Reinforcement Art. No. 561510
Art. No. 287779

135.5
42x9.8 Reinforcement 35x35x1.5mm
106

Art. No. 232822 35x22x2mm Reinforcement

104

Reinforcement Art. No. 287799

Art. No. 200023
42x10 Reinforcement
Art. No. 261748 Outer frame 62mm Outer Frame 62mm
Art. No. 546605 Art. No. 503545 150mm Sill
150mm Sill 95mm Sill
Art. No. 503920
Art. No. 246330 Art. No. 503910 30x20x2mm
Reinforcement
Art. No. 255924

30x20 Reinforcing
Art. No. 255924

DETAILED DRAWINGS ARE AVAILABLE ON REQUEST

21
REHAU S706 70MM / REHAU TRITEC 60MM
TILT/TURN WINDOWS
2. PVC-U Window Systems
2.5 Fully Reversible windows – REHAU S706 70mm

Key Characteristics Appearance

- Allows easy manufacture of fully reversible - Available in White, Mahogany, Golden Oak and
windows in combination with fixed lights, tilt Rosewood both sides as standard
and turn and casement windows from the - For other non-standard laminate options and the
REHAU S706 system range of RAL colours available using our - Acryl II
-D
 esigned to meet all common specifications colour system please refer to page 46.
- P ossible combinations include: top turn or side
turn with fixed lights, tilt and turn and casement Reinforcement
windows - Totally separate reinforcement chambers in
profiles enables galvanised steels to be inserted
- 7 0mm profile depth matches British architecture
for additional strength when required
and is the ideal replacement for timber sections
- For more information please consult our
- All external sections have a 50° chamfer for optimal
Reinforcement Guidelines ref. 700.620E.
aesthetic appearance and to match putty-line
and 706.695EN.
- Integrates with the range of REHAU S706
supplementary profiles and sills.

22
 1 Side Swing Option
Fittings and Hardware
- Accepts a wide range of popular hinge types REHAU S706 Approvals
- BS EN 12608 (BS 7412) KM 13358
-C
 ockspur handles, espagnolette or shootbolt
- BS 7950 KM 76189
locking options
- PAS 23/24 KM 66461
- All fittings can be fastened into metal - BBA Report No’s 1108 and 1309
reinforcement for additional strength/security
-M
 anufacturers recommendations on maintenance
should be followed.

Glazing
- 4 mm to 42mm glazing
1
- Internally beaded for security and ease of glazing
- S loped, semi-sloped or featured co-extruded
Insulation glazing beads for choice of aesthetics
- Complies with the requirements of the Building -C
 o-extruded solid and cellular EPDM casement
Regulations covering Conservation of Fuel and seal for optimum performance
Power - Part L (England and Wales) and Part J
- Integral head-drip for high performance and
(Scotland) when glazed using the correct type of
improved aesthetics.
sealed unit
- Sound insulation is dependent on glazing
specification. For more information please consult
one of our Commercial Sales Managers.
Fully reversible window

Maximum Sash Sizes Maximum

Sash Finish WxH cm kg
Top Turn White 138x138 60
Side Turn White 90x120 60
Top Turn Coloured/Foiled 138x138 60
Side Turn Coloured/Foiled 90x120 60

These sizes are for guidance only and are dependent on fittings and hardware used.
Please consult REHAU for more detailed information.

23
PVC-U Window Systems 2.
Fully Reversible windows – REHAU S706 70mm 2.5

70mm Fully reversible window 70mm Fully reversible window

Top swing Top swing with fixed light

42x21 Outer frame42x21

62mm
Reversible Reversible outer frame
42x10 Reinforcement Reinforcement
Reinforcement Art. No. 546605
outer frame Art. No. Art. No. 546370
261748 Art. No. 264464
Art. No. 264464
Art. No. 546370
42x9.8 Reinforcement
Art. No. Head
232822drip seal Co-ex Seal
Head drip seal Co-ex Seal 18x40x18
104 Art. No. 865250 Art. No. 865260
Reinforcement

126
Art. No. 865250 Art. No. 865260
126

Art. No. 287779

27x42x17 Tilt & turn sash profile Z 27x42x17
Reinforcement Reinforcement
Art. No. 546776
Art. No. 264434 Reversible sash profile Art. No. 264434
Reversible
sash profile Art. No. 546540
Art. No. 546540
18.5mm
Glazing bead
18.5mm
Art. No. 546131
18.5mm Glazing bead
Glazing bead Art. No. 546131
Art. No. 546131
Reversible sash profile
Art. No. 546540
Reversible sash profile
Reversible Art. No. 546540 27x42x17
sash profile Reinforcement
27x42x17
Art. No. 264434
Reinforcement
Art. No. 546540 27x42x17 Art. No. 264434
136

Reinforcement
Art. No. 264434
136
126

Co-ex Seal
Art. No. 865260 Mullion T profile
42x16 Reinforcement
42x16 Reinforcement Mullion Z profile
Art. No. 546530
Reversible Art. No. 264454
Art. No. 264454 Art. No. 546530
outer frame 42x21
Art. No. 546370 Reinforcement
Art. No. 264464
18.5mm
18.5mm
Glazing bead
Glazing bead
30x20 Reinforcing Art. No. 546131
Art. No. 546131
Art. No. 255924
150mm sill
Art. No. 246330 UniversalUniversal
frame profile
frame profile
Art. No. Art.
546185
No. 546185
72

72

42x30
150mm150mmsill sill 42x30 Reinforcement
Art. No. Art.
246330No. 246330 Reinforcement
Art. No. 261958
Art. No. 261958

30x20 Reinforcing
30x20 Reinforcing
Art. No. 255924
Art. No. 255924

DETAILED DRAWINGS ARE AVAILABLE ON REQUEST

23
REHAU S706 70MM
FULLY REVERSiBLE WINDOWS
2. PVC-U Window Systems
2.6 Pivot windows – REHAU Tritec 60mm

Key Characteristics Appearance

- Ideal window for high rise applications - Available in White as standard
- S lim sight-lines to match timber - Mahogany, Rosewood and Golden Oak laminate
- All style combinations available: pivot window with options are available to special order
fixed light tilt and turns and casement windows - For other non-standard laminate options and the
-C
 hoice of outer frame widths to match sight-line range of RAL colours available using our Acryl II
requirements or building detail without the need of colour system please refer to page 46.
clip-on profiles
- Wide range of supplementary profiles and sills to
suit most building requirements.

24
Reinforcement 1 S706 Pivot Window
- Reinforced with galvanised steel
- For more information please consult our
Reinforcement Guidelines ref. 700.620E.
and 703.695EN.

Insulation
- Complies with the requirements of the Building
Regulations covering Conservation of Fuel and
Power - Part L (England and Wales) and Part J
(Scotland) when glazed using the correct type of 1
sealed unit
- Sound insulation is dependent on glazing
Glazing
specification. For more information please consult
- 4 mm to 32mm double glazed units can be
one of our Commercial Sales Managers.
accommodated

Fittings and Hardware - Wide choice of sloped, sculptured semi-sloped

- Perimeter locking operated from one handle or square edged glazing beads with or without
ensures continued weather performance co-extruded glazing seals.

- Variety of handles, locking systems and hinges to

suit most specification requirements
- Manufacturers recommendations on maintenance
should be followed.

Slimline Pivot Window

Maximum Sash Sizes Maximum

Sash Finish WxH cm m2 kg
Sash T White 160x120 1.9 100

These sizes are for guidance only and are dependent on fittings and hardware used.
Please consult REHAU for more detailed information.

25
PVC-U Window Systems 2.
Pivot windows – REHAU Tritec 60mm 2.6

60mm Pivot window

Internally beaded chamfered sash

35x22x2mm
Reinforcement
Outer Frame 62mm Art. No. 200023
Art. No. 503540

Pivot adapter
Art. No. 541210
165

35x42x2
Reinforcement
Art. No. 350193
Pivot sash T 94mm
Art. No. 541170

14.5mm
Glazing bead
Art. No. 503451

Pivot sash T 94mm

Art. No. 541170 35x42x2
Reinforcement
Art. No. 350193
165

Pivot adapter
Outer Frame 62mm Art. No. 541210
Art. No. 503540
35x22x2mm
Reinforcement
150mm Sill Art. No. 200023
Art. No. 503920
30x20x2mm
Reinforcement
Art. No. 255924

DETAILED DRAWINGS ARE AVAILABLE ON REQUEST

25
REHAU TRITEC 60MM
PIVOT WINDOWS
2. PVC-U Window Systems
2.7 VERTICAL Sliding Windows – REHAU Heritage

Key Characteristics
- REHAU Heritage profiles developed following
extensive consultation with conservation bodies
and housing associations
- Traditional timber aesthetics can be replicated
by combining sight-lines of the 42mm, 52mm
or 62mm heritage sashes with the deep 81mm
heritage bottom rail. The 10mm incrementally
stepped sash profiles allow for equal glazing
sight-lines to run from top to bottom sash creating
an aesthetically pleasing finished product
- Exterior of sash has putty-line aesthetics with
matching astragal bar and inside is sculptured
with matching astragal bar
- A stepped frame with either mechanically jointed
sill or fully welded options
- Optional heritage style horn replicates traditional
timber aesthetics
- Triple brush seals for superior draught proofing
- Anti-jemmy Security Bar for optimum security
- Sizes up to 1800 X 3500mm
- Dummy mullion option for keeping slim sight-lines
when joining multiple windows.

Appearance
- An all white finish for the traditional appearance is
possible using REHAU high performance silicone
and EPDM seals
- A Georgian style shaped glazing bar available both
internally and externally.

Reinforcement
Galvanised steel reinforcement are required above
the following parameters:
- Where frames cannot be adequately anchored
to masonry
- Sashes must always be reinforced.

26
Insulation
-C omplies with the requirements of the Building
Regulations covering Conservation of Fuel and Power
- Part L (England and Wales) and Part J (Scotland)
when glazed using the correct type of sealed unit.
- Sound insulation is dependant on glazing
specification. For more information please consult
one of our Commercial Sales Managers.

Fittings and Hardware

- The REHAU Heritage vertically sliding system can
accommodate a wide variety of standard fittings
- Sliding latches enable the sashes to be tilted inwards
for ease of cleaning and to be restricted for safety
- Hardware manufacturer’s recommendations on
maintenance should be followed.

Glazing
- 24mm and 28mm glazing
- Internally glazed sculptured bead for traditional
internal joinery detail
- Dry glazed with co-extruded glazing bead.

1 REHAU Heritage Vertical Sliding

Window - Golden Oak

REHAU Heritage Approvals

- BS EN 12608 (BS 7412) KM 13358
1 - BS 7950 KM 76189

Vertical Sliding Window These sizes are for guidance

only and are dependent on
fittings and hardware used.
Please consult REHAU for more detailed
information.
Maximum Frame Sizes Maximum
Sash Finish WxH cm *it is not permissible to manufacture the
Slim/Intermediate Sash White 1500 X 3000* product to both maximum height and width.
Intermediate/Large Sash White 1800 X 3500* *The maximum sash weight for slim/
Slim/Intermediate Sash Foiled 1500 X 2500* intermediate option is 40kg and
Intermediate/Large Sash Foiled 1650 X 2500*
intermediate/large Sash option is 50kg.

27
PVC-U Window Systems 2.
VERTICAL Sliding Windows – REHAU Heritage 2.7

Horizontal
Horizontal SectionSection
throughthrough
mullionmullion
detail detail
VerticalVertical
SectionSection

Vertical Section Horizontal Section through mullion detail

137 137
Outerframe
TOP SASH
TOP SASH
Outerframe
Fixing Cover Reinforcement
Fixing Cover Reinforcement Outerframe
Outerframe Cover StopCover Stop Profile
Profile
Art. No. 219180
Art. No. 219180 Art. No. 233721
Art. No. 233721 Art. No. 559500
Art. No. 559500 Art. No. 559610
Art. No. 559610
Outerframe
Outerframe
Slim Sash Slim Sash Art. No. 559500
Art. No. 559500 Int. SashInt. Sash
Art. No. 559510
Art. No. 559510 Reinforcement
Reinforcement Slim Sash Slim Sash
Art. No. 219010
Art. No. 219010 Art. No. 559510
Art. No. 559510
Cover
Cover Stop Stop Profile
Profile
99
99

Slim SashSlim Sash Art. No. 559610

Art. No. 559610
Reinforcement
Reinforcement
24mm 24mm
Art. No. 219000
Art. No. 219000 Sculptured
Sculptured Bead Bead Fixed Sliding
Fixed Sliding
Art. No. 559590
Art. No. 559590 Fixing Cover
Fixing Cover Sash Sash Fixed Sash Fixed Sash Sash Sash
Art. No. 219180
Art. No. 219180
Int. Slim Int. Slim
Sash Interlock
Sash Interlock 100 x 6mm Slim Sash
Slim Sash
Slim Sash 100 x 6mm Slim Sash
Art. No. 559550
Art. No. 559550 Reinforcement Reinforcement
Reinforcement Reinforcement
Reinforcement
Reinforcement Slim SashSlim Sash
Art. No. 252384
Art. No. 252384 Art. No. 219000
Art. No. 219000
Int. SashInt. Sash Art. No. 219000 Art. No. 559510
Art. No. 219000Art. No. 559510
24mm 24mm Art. No. 559520
Art. No. 559520
AluminiumAluminium
bead bead
54,5
54,5

Int. SashInt. Sash

Art. No. 219140
Art. No. 219140 Reinforcement
Reinforcement 161,2 161,2
Art. No. 219010
Art. No. 219010

24mm 24mm
Sculptured
Sculptured Bead Bead 161,2 161,2
BOTTOM
Art. No. 559590
Art. No. 559590 BOTTOM
SASH SASH Int. SashInt. Sash
Int. SashInt. Sash Reinforcement
Reinforcement
Deep Rail
Deep Bottom Rail Outerframe Reinforcement
BottomOuterframe Reinforcement
Int. SashInt. Sash Art. No. 219010
Art. No. 219010
Art. No. 559540 Art. No. 559500
Art. No. 559500 Art. No. 219010
Art. No. 219010 Art. No. 559520
Art. No. 559520 Int. SashInt. Sash
Art. No. 559540 Reinforcement
Reinforcement
DBR DBR Art. No. 219010
Art. No. 219010
Reinforcement
Reinforcement
Art. No. 219050
Art. No. 219050
121
121

Fixed Fixed Sliding Sliding

50x20 50x20 Sash Sash Fixed Sash Fixed Sash Sash Sash
reinforcement
reinforcement
Art. No. 259772
Art. No. 259772

Stub SillStub Sill

Art. No. 559570
Art. No. 559570
Fixing Cover
Fixing Cover
Art. No. 219180
Art. No. 219180

Cover
Cover Stop Stop Profile
Profile Mullion adaptor
Mullion adaptor profile profile
Art. No. 559610
Art. No. 559610 Art. No. 219170
Art. No. 219170

DETAILED DRAWINGS ARE AVAILABLE ON REQUEST

27
REHAU HERITAGE
VERTICAL SLIDING WINDOWS
3. PVC-U Door Systems
3.1 Residential Doors – REHAU S706 70mm

Key Characteristics Appearance

-C
 hoice of chamfered profiles using REHAU S706 - Available in White, Mahogany, Rosewood and
or fully sculptured using the REHAU Edge system Golden Oak On White, Mahogany, Rosewood and
- Available in open-in and open-out styles for a Golden Oak both sides as standard
variety of installations - For other non-standard laminate options and the
-C
 ompatible with casement, fully reversible, pivot range of RAL colours available using our Acryl II
and tilt/turn windows and French tilt/slide and colour system please refer to page 46.
Multi-Fold doors
Reinforcement
-C
 an be incorporated into conservatory designs.
- Fully reinforced sash using galvanised steel
- Pre-routed on locking side ensures continuous
reinforcement
- REHAU’s innovative weldable corner joint system
can be incorporated to increase rigidity of the door
- For more information please consult our Reinforcement
Guidelines ref. 700.620E. and 706.695EN.

28
 1 REHAU S706 70mm Residential Door

2 REHAU Weldable corner joint system

REHAU S706 Approvals

- BS EN 12608 (BS 7412) KM 13358
- PAS 23/24 KM 66461

1 2

Insulation Glazing
- Complies with the requirements of the Building - 4 mm to 42mm glazing
Regulations covering Conservation of Fuel and -G
 lazing depth can be extended to 42mm
Power - Part L (England and Wales) and Part J
- Must be fitted with safety glass, which meets BS 6262
(Scotland) when glazed using the correct type of
-D
 ry glazing with glazing bead and gasket or a
sealed unit
co-extruded glazing bead
- Sound insulation is dependent on glazing
-C
 hoice of sloped or sculptured beads
specification. For more information please consult
one of our Commercial Sales Managers. - L ow level glazing option available.

Fittings and Hardware Composite Doors

- Can accommodate most standard locking REHAU offers a dedicated Composite Door
mechanism including high security bolt systems outerframe profile for the REHAU S706/REHAU Edge
70mm window/door system. The outerframe profile
- Flag or butt hinges
is suitable for use with a standard 44mm door blank,
- Manufacturers recommendations on maintenance
and has an extra wide glazing upstand which gives a
should be followed.
2mm closing seal gap. The profile is designed to take
two brushpiles for weather performance.

Residential Door

Maximum Sash Sizes Maximum

Sash Finish WxH cm kg
Sash Z White 100x220 100
Sash T White 100x220 100
Sash Z Coloured/Foiled 100x210 100
Sash T Coloured/Foiled 100x210 100

Sash width shown not less than 590mm.

Butt hinges should be used when producing door sashes under 850mm widths.

29
PVC-U Door Systems 3.
Residential Doors – REHAU S706 70mm 3.1

70mm Residential door 70mm Residential door

Low threshold with midrail Outward opening with midrail

42x30 Universal
42x30 Universal 42x30 Reinforcement Universal
frame profile
Reinforcement Universal frame profile
Reinforcement frame profile 42x30 Reinforcement
Art. No. 261958 frame profile Art. No. 261958 Art. No. 546185
Art. No. 261958 Art. No. 546185 Art. No. 261958 Art. No. 546185
Art. No. 546185
149,5

149,5
149,5

149,5
40x40 Door T chamfered Door T chamfered
40x40 Door T chamfered 40x40 Door T chamfered
Reinforcement Art. No. 546635 40x40
Reinforcement Art. No. 546635
Reinforcement Art. No. 546635 Reinforcement Art. No. 546635
Art. No. 258841 Art. No. 258841
Art. No. 258841 Art. No. 258841

18.5mm
18.5mm Glazing bead 18.5mm
Glazing bead
18.5mm Glazing bead Glazing bead
Art. No. 546131 Art. No. 546131
Art. No. 546131 Art. No. 546131

40x40 40x40
40x40
Reinforcement 40x40
Reinforcement
Reinforcement Door T chamfered Reinforcement Door T chamfered
Art. No. 258841 Door T chamfered Art. No. 258841
Art. No. 258841 Art. No. 546635 Art. No. 258841 Door T chamfered
105,5

Art. No. 546635

105,5

Art. No. 546635

105,5

Art. No. 546635

105,5

18.5mm
18.5mm Glazing bead 18.5mm
Glazing bead
18.5mm
Art. Glazing bead
No. 546131 Glazing bead
Art. No. 546131 Art. No. 546131
Art. No. 546131
Door T chamfered
Door T chamfered
Art. No. 546635
40x40 Art. No. 546635 40x40
40x40
Reinforcement 40x40
Reinforcement
Reinforcement Low Threshold Reinforcement Door T chamfered
Art. No. 258841 Art. No. 258841
Low Adaptor
Sash Threshold Art. No. 258841 Door T chamfered
Art. No. 258841 Sash Adaptor Art. No. 546635
112,5

Art. No. 200309 Art. No. 546635

112,5

Art. No. 200309

Silicon Gasket
149,5

Silicon Gasket
149,5

Art. No. 837310

Art. No. 837310 42x30 Universal
42x30
Reinforcement Universal
frame profile
Reinforcement
Art. No. 261958 frame profile
15mm Low threshold Art. No. 261958 Art. No. 546185
15mm Low threshold Art. No. 546185
Art. No. 233214 150mm sill
Art. No. 233214 150mm sill
Art. No. 246330
Art. No. 246330

30x20 Reinforcing
30x20 Reinforcing
Art. No. 255924
Art. No. 255924

DETAILED DRAWINGS ARE AVAILABLE ON REQUEST

29
REHAU S706 70mm
RESIDENTIAL DOORS
3. PVC-U Door Systems
3.2 Residential Doors – REHAU Tritec 60mm

Key Characteristics Appearance

- Available in open-in and open-out styles for a - Available in White, Mahogany, Rosewood and
variety of installations Golden Oak On White, Mahogany, Rosewood and
- L ow threshold complies with the requirements of Golden Oak both sides as standard
Part M Building Regulations for disabled access - For other non-standard laminate options and the
-M
 idrail can incorporate a standard letterplate range of RAL colours available using our Acryl II
colour system please refer to page 46.
-C
 ompatible with casement, tilt/turn, French
and pivot windows, French tilt/slide and
Reinforcement
Multi-Fold doors
- Fully reinforced sash using galvanised steel
-C
 an be incorporated into conservatory designs.
- Pre-routed on locking side ensures continuous
reinforcement
- REHAU’s innovative weldable corner joint system
can be incorporated to increase rigidity of the door
- For more information please consult our Reinforcement
Guidelines ref. 700.620E. and 703.695EN.

30
 Fittings and Hardware REHAU Tritec Approvals
-C
 an accommodate most standard locking - BS EN 12608 (BS 7412) KM 13358
- PAS 23/24 KM 66461
mechanism including high security bolt systems
- F lag or butt hinges
-M
 anufacturers recommendations on maintenance
should be followed.

Glazing
- 4 mm to 32mm glazing
-M
 ust be fitted with safety glass, which meets
BS 6262
- S ilver grey gasket with White profiles and like
coloured gasket with Mahogany, Rosewood and
Golden Oak are less obtrusive
-D
 ry glazing with glazing bead and gasket or a
co-extruded glazing bead
-C
 hoice of sloped or sculptured beads
- L ow level glazing option available.

Insulation
-C omplies with the requirements of the Building
Regulations covering Conservation of Fuel and Power
- Part L (England and Wales) and Part J (Scotland
when glazed using the correct type of sealed unit
- Sound insulation is dependent on glazing
specification. For more information please consult
one of our Commercial Sales Managers.

Residential Door

Maximum Sash Sizes Maximum

Sash Finish WxH cm kg
Sash Z Slimline White 100x220 100
Sash T Slimline White 100x220 100
Sash Z Slimline Coloured/Foiled 100x210 100
Sash T Slimline Coloured/Foiled 100x210 100

Sash width shown not less than 590mm.

Butt hinges should be used when producing door sashes under 850mm widths.

31
PVC-U Door Systems 3.
Residential Doors – REHAU Tritec 60mm 3.2

35x35x1.5mm
Reinforcement
Outer Frame 75mm
Art. No. 287799
60mm Residential door 60mm Residential door Art. No. 503825
Low threshold inward opening Outward opening

Door casement 35x40x2mm

sash Reinforcement

154
Outer Frame 75mm Art. No.35x35x1.5mm
503815 Art. No. 233671
35x35x1.5mm
Reinforcement Art. No. 503825 Reinforcement
Outer Frame 75mm
Art. No. 287799 Art. No. 287799
Art. No. 503825

Door casement 35x40x2mm

35x40x2mm 154 sash Reinforcement
154

Reinforcement Art. No. 503815 Art. No. 233671

35x35x1.5mm Outer Frame 75mm
Door casement sash Art. No. 233671
Reinforcement Art. No. 503825 14.5mm
Art. No.Art.
503805
No. 287799 Glazing bead
Art. No. 503451

Door casement sash

35x40x2mm Art. No. 503815 35x40x2mm
154

Reinforcement
Reinforcement
Door casement sash Art. No. 233671
14.5mm Art. No.14.5mm
233671
Art. No. 503805 Glazing bead Glazing bead
Art. No. 503451 Art. No. 503451
154

Door casement sash

Art. No.
Outer Frame 503815
75mm 35x40x2mm
Door casement sash
Reinforcement
Art. No. 503800 Art. No. 503825
14.5mm Art. No. 233671
35x35x1.5mm
Glazing bead Reinforcement
114

35x40x2mm
Art. No. 503451 Art. No. 287799
Low threshold sash adapter Reinforcement 150mm Sill
Art. No. 238364 Art. No. 233671 Art. No. 503920 30x20x2mm
154

Reinforcement
Art. No. 255924

Silicone gasket Outer Frame 75mm

Door casement sash 15mm
Art. No.837310 Art. No. 503825
Art. No. 503800 Low threshold
Art. No. 232982 35x35x1.5mm
Reinforcement
114

35x40x2mm Art. No. 287799

Low threshold sash adapter Reinforcement 150mm Sill
Art. No. 238364 Art. No. 233671 Art. No. 503920 30x20x2mm
Reinforcement
Art. No. 255924

Silicone gasket
Art. No.837310 15mm
Low threshold
Art. No. 232982

DETAILED DRAWINGS ARE AVAILABLE ON REQUEST

31
REHAU TRITEC 60mm
RESIDENTIAL DOORS
3. PVC-U Door Systems
3.3 French Doors – REHAU S706 70mm and REHAU Tritec 60mm

Key Characteristics Reinforcement

- Available in 60mm and 70mm options - Fully reinforced sash using galvanised steel
-C
 hamfered or fully sculptured profiles available - Pre-routed on locking side ensures continuous
using REHAU Edge reinforcement
-O
 pen-in or open-out styles offer - REHAU’s innovative weldable corner joint system
increased versatility can be incorporated to increase rigidity of the door
-D
 ummy mullion allows full aperture opening - REHAU Tritec 60mm system offers chamfered
-C
 an be constructed for equal or non-equal split. profiles.
- For more information please consult our
Appearance Reinforcement Guidelines ref. 700.620E. and
- Available in White, Mahogany, Rosewood and 706.695EN. (REHAU S706), 703.695EN. (REHAU
Golden Oak on White, Mahogany, Rosewood and Tritec).
Golden Oak both sides as standard
- F or other non-standard laminate options and the Insulation
range of RAL colours available using our Acryl II - Complies with the requirements of the Building
colour system please refer to page 46. Regulations covering Conservation of Fuel and Power
- Part L (England and Wales) and Part J (Scotland)
when glazed using the correct type of sealed unit
- Sound insulation is dependent on glazing
specification. For more information please consult
one of our Commercial Sales Managers

32
 Fittings and Hardware REHAU S706 Approvals
- F lag, butt or cranked hinges - BS EN 12608 (BS 7412) KM 13358
- PAS 23/24 KM 66461
- A wide range of locking mechanisms
- R estrictor stays and ventilator positions
-M
 anufacturers recommendations on maintenance
should be followed.

Glazing
- 4 mm to 32mm glazing
- F or REHAU S706 and REHAU Edge systems
glazing depth can be extended to 42mm by
using a special bead
-M
 ust be fitted with safety glass which meets
requirements of BS 6262
-D
 ry glazed with glazing bead with gasket or
co-extruded glazing beads in shaped, sloped or
sculptured shapes.

French Door French Door

70mm System 60mm System

Maximum Maximum
Maximum Sash Sizes Maximum Sash Sizes
Sash Finish WxH cm kg Sash Finish WxH cm kg
Sash Z White 85x220 100 Sash Z White 80x220 100
Sash T White 85x220 100 Sash Z Slimline White 80x220 60
Sash Z Coloured/Foiled 70x210 100 Sash T White 80x220 100
Sash T Coloured/Foiled 70x210 100 Sash Z Coloured/Foiled 70x210 100
Sash Z Slimline Coloured/Foiled 70x210 60
Sash width shown not less than 590mm. Sash T Coloured/Foiled 70x210 100
Butt hinges should be used when producing door
sashes under 850mm widths. Sash width shown not less than 590mm.
Butt hinges should be used when producing door
sashes under 850mm widths.

33
PVC-U Door Systems 3.
French Doors – REHAU S706 70mm and REHAU Tritec 60mm 3.3

70mm French Door Outward Opening

Universal Door T 18.5mm 42x10 18.5mm Door T Universal

frame profile chamfered Glazing Bead Door T chamfered Reinforcement Door T chamfered Glazing Bead chamfered frame profile
Art. No. 546185 Art. No. 546635 Art. No. 546131 Art. No. 546635 Art. No. 261748 Art. No. 546635 Art. No. 546131 Art. No. 546635 Art. No. 546185

40x40 40x40 40x40 42x30

42x30 40x40 Reinforcement Reinforcement Reinforcement Reinforcement
Reinforcement Reinforcement Art. No. 258841 Art. No. 252827 Art. No. 258841 Art. No. 261958
T Mullion 69mm
Art. No. 261958 Art. No. 258841 French door spacer Art. No. 546085
Art. No. 200367
149,5 224 149,5

60mm French Door Inward Opening

Door casement 14.5mm 35x40x2mm French Door Dummy Mullion 35x50x2mm 14.5mm Door casement
sash Glazing bead Reinforcement Spacer 70mm Reinforcement Glazing bead sash
Outer Frame Outer Frame
75mm Art. No. 503805 Art. No. 503451 Art. No. 233671 Art. No. 200384 Art. No. 503555 Art. No. 233611 Art. No. 503451 Art. No. 503805 75mm
Art. No. 503825 Art. No. 503825

35x40x2mm
Reinforcement Z Door sash Z Door 35x40x2mm
35x35x1.5mm 35x12x1.5mm 35x35x1.5mm
Art. No. 233671 107mm sash 107mm Reinforcement Reinforcement
Reinforcement Reinforcement
Art. No. 287799 Art. No. 503805 Art. No. 287798 Art. No. 503805 Art. No. 233671 Art. No. 287799

154 228 154

DETAILED DRAWINGS ARE AVAILABLE ON REQUEST

33
REHAU S706 70mm & REHAU TRITEC 60MM
FRENCH DOORS
3. PVC-U Door Systems
3.4 Tilt/slide patio doors –
REHAU S706 70mm and REHAU Tritec 60mm

Key Characteristics Reinforcement

- Available in both 70mm or 60mm profiles - Fully reinforced sashes using galvanised steel
- Tilt position facilitates ventilation. - Pre-routed steel on locking side ensures
continuous reinforcement
Appearance - REHAU’s innovative weldable corner joint system
- Available in White, Mahogany, Rosewood and can be incorporated to increase rigidity of the door
Golden Oak on White, Mahogany, Rosewood and
- For more information please consult our
Golden Oak both sides as standard
Reinforcement Guidelines ref. 700.620E.
- F or other non-standard laminate options and the and 706.695EN. (REHAU S706), 703.695EN.
range of RAL colours available using our Acryl II (REHAU Tritec).
colour system please refer to page 46.

34
Insulation Glazing
- Complies with the requirements of the Building - 4 mm to 32mm glazing
Regulations covering Conservation of Fuel and - F or REHAU S706 and REHAU Edge systems
Power - Part L (England and Wales) and Part J glazing depth can be extended to 42mm by
(Scotland) when glazed using the correct type of using a special bead
sealed unit
-M
 ust be fitted with safety glass which meets
- Sound insulation is dependent on glazing requirements of BS 6262
specification. For more information please consult
-D
 ry glazed with glazing bead with gasket or
one of our Commercial Sales Managers.
co-extruded glazing beads in shaped, sloped or
sculptured shapes.
Fittings and Hardware
- Multi-point perimeter locking mechanism
- Internal only or internal/external handles
- Manufacturers recommendations on maintenance
should be followed.

Tilt/Slide Patio Door

Maximum Sash Sizes Maximum

Sash Finish WxH cm kg
Sash Z White 150x230 100
Sash Z Coloured/Foiled 110x230 100

These sizes are for guidance only and are dependent on fittings and hardware used.
Please consult REHAU for more detailed information.

35
PVC-U Door Systems 3.
Tilt/slide patio doors – 3.4
REHAU S706 70mm and REHAU Tritec 60mm

70mm Tilt and slide door

42x30 42x23 42x30

Reinforcement Door Z chamfered 18.5mm Glazing Bead Door Z chamfered Reinforcement 18.5mm Glazing Bead Reinforcement
Art. No. 261958 Art. No. 546625 Art. No. 546131 Art. No. 546625 Art. No. 287776 Art. No. 546131 Art. No. 261958

40x40
40x40 Reinforcement
Universal Reinforcement Universal
Art. No. 258841 Mullion profile T frame profile
frame profile Art. No. 258841 Art. No. 546475 Art. No. 546185
Art. No. 546185

149,5 159,5 72

60mm Tilt and slide door

Door casement sash 14.5mm Glazing bead 35x40x2mm Reinforcement 14.5mm Glazing bead Outer Frame 75mm
Art. No. 503805 Art. No. 503451 Art. No. 233671 Art. No. 503451 Art. No. 503825
Outer Frame 75mm
Art. No. 503825

35x40x2mm
Reinforcement 35x30x2mm
35x35x1.5mm Reinforcement
Reinforcement Art. No. 233671 Z Door sash 107mm 35x35x1.5mm
T Transom/ Art. No. 250219 Reinforcement
Art. No. 287799 Art. No. 503805
Mullion 88mm Art. No. 287799
Art. No. 503795

154 167 75

DETAILED DRAWINGS ARE AVAILABLE ON REQUEST

35
REHAU S706 70mm & REHAU TRITEC 60MM
TILT/SLIDE PATIO DOORS
3. PVC-U Door Systems
3.5 In-line patio doors – REHAU S717

Key Characteristics Reinforcement

- All welded construction offers greater durability - Fully reinforced using galvanised steel.
- 2 , 3 and 4 pane options available
Insulation
-D
 ouble brush seals on all four sides ensures
- Complies with the requirements of the Building
excellent sealing properties
Regulations covering Conservation of Fuel and
- 7 0mm frame depth enables coupling to both the
Power - Part L (England and Wales) and Part J
REHAU Tritec and REHAU S706 systems
(Scotland) when glazed using the correct type of
- S lim visible faces. sealed unit
- Sound insulation is dependent on glazing
Appearance
specification. For more information please consult
- Available in White and Mahogany woodgrain
one of our Commercial Sales Managers.
as standard
- F or other non-standard laminate options and the
range of RAL colours available using our Acryl II
colour system please refer to page 46.

36
 3.
3.5

In-line Patio door

REHAU S717

Outer Frame
40x20 Reinforcement Art. No. 557000
Art. No. 256013

Weather Rail
Sash
Art. No. 557001
140 Art. No. 557140

34 x 37
Reinforcement
Art. No. 261838

Fittings and Hardware

- Adjustable tandem rollers
- A wide range of multi-point locking mechanisms 6.5mm Glazing Bead
Art. No. 560580
- Traditional D style or tilt/turn style handles
34 x 37
- Manufacturers recommendations on maintenance Reinforcement Sash
should be followed. Art. No. 261838 Art. No. 557140

Glazing Frame Drainage

Cover
140

- 20, 24 or 28mm double glazing Art. No. 241282

Outer Frame
- Must be fitted with safety glass which meets 40x20 reinforcement
Art. No. 256013 Art. No. 557000
requirements of BS 6262
150mm sill
- Dry glazed with a co-extruded glazing bead. Art. No. 246330

30x20 Reinforcing
In-Line Patio Door
Art. No. 255924

x o

Maximum Sash Sizes Maximum

Sash Finish WxH cm kg DETAILED DRAWINGS ARE AVAILABLE ON REQUEST
Sash White 120x210 40

Sash width shown not less than 590mm. REHAU S717 Approvals
Butt hinges should be used when producing door Performance tested to requirements
sashes under 850mm widths. - BS 6375 Parts 1, 2, 3
- Reports - 261/40404994 and
Max. element size: 242x221 2 Pane 261/4095711
Max. element size: 362x221 3 Pane
Max. element size: 400x221 4 Pane

37
3. PVC-U Door Systems
3.6 REHAU Multi-fold doors –
REHAU S706 70mm and REHAU Tritec 60mm

The REHAU Multi-Fold Door is available in both multi-fold allowing greater flexibility. This is ideal for
REHAU Tritec 60mm and S706 70mm. connecting any rooms in the house or the house to
the garden outside, where they provide additional
Great appearance and advanced performance mean natural light to the room. The door concertinas
inevitable demand for a modern and sophisticated smoothly and is remarkably easy to open.
door system full of benefits.
- It is vital that the doors are able to endure UK
The REHAU Multi-Fold Door boasts superior design weather conditions therefore REHAU Multi-Fold Doors
and engineering to complement outstanding versatility. have been subject to vigorous in-house testing.

- Panels can be connected in a number of - Suitable for both domestic and commercial
configurations so that the doors can be bi-fold or applications as they create openings and partitions.

38
- White, Mahogany and Golden Oak finishes are Surface Finish
available to meet individual tastes. REHAU is renowned for its quality; it maintains a
lasting gloss finish and reduced maintenance.
- REHAU Multi-Fold Doors can be an alternative to
French and Patio Doors but can also be used in 3 Chamber Profiles
conjunction with them to accentuate open plan living. All REHAU 60mm and 70mm profiles have three
chambers for improved thermal performance and
As with all REHAU products the specification, efficiency.
fabrication and installation are results of quality
engineering, placing our products firmly at the Easy Glazing
forefront of the market. REHAU’s proven single leg glazing ensures that
on-site glazing is easy and secure when fitted.
REHAU systems have superb aesthetics, easy
fabrication and excellent performance. Specification
REHAU 60mm and 70mm systems fully adhere to
any commercial specification.

Maximum overall frame for a Maximum overall frame for a

White Multi-Fold Door coloured or foiled Multi-Fold Door
WIDTH
Opening to the outside 4m 3m
For an internal door 5m 4m

HEIGHT 2.3m 2.2m

Maximum sash width 900mm 900mm

39
PVC-U Door Systems 3.
Multi-fold doors – 3.6
REHAU S706 70mm and REHAU Tritec 60mm

70mm Multi-Fold Door 60mm Multi-Fold Door

15mm Frame Extension
15mm (optional)
Frame
15mm Extension
Frame Extension
(optional)
Art.(optional)
No. 546200
Art. No. 546200
Art. No. 546200 10mm Frame Extension
10mm (optional)
Frame
10mm Extension
Frame Extension
(optional) (optional)
Art. No. 561290
Art. No. 561290
Art. No. 561290

Universal frame profile 35x35 Reinforcement

Universal
Art.frame
Universal
profile
frame profile
No. 546185 35x35 Art.
Reinforcement
35x35 Reinforcement
No. 287799
Art. No. 546185
Art. No. 546185 Art. No. 287799
Art. No. 287799
42x30 Reinforcement
153

42x30 Art.
Reinforcement
42x30 Reinforcement 75mm Outer frame profile
No. 261958
153

153

75mm Art.
Outer
75mm
No.frame
Outer
profile
frame profile
Art. No. 261958
Art. No. 261958 181 503825
181

181
Art. No. 503825
Art. No. 503825
35x42 Reinforcement 35x42 Reinforcement
35x42 Art.
Reinforcement
35x42 Reinforcement
No. 350193 35x42 Art.
Reinforcement
35x42 Reinforcement
No. 350193
Art. No. 350193
Art. No. 350193 Art. No. 350193
Art. No. 350193
Door Z sash
Door Z Art.
sash
Door Z sash Door Z sash
No. 550510 Door Z Art.
sash
Door Z sash
Art. No. 550510
Art. No. 550510 No. 541160
Art. No. 541160
Art. No. 541160
18.5mm
18.5mm 18.5mm
Glazing bead
GlazingArt.
bead
Glazing bead 14.5mm
No. 546131 14.5mm 14.5mm
Glazing bead
Art. No. 546131
Art. No. 546131 Glazing bead
Glazing bead
Art. No. 503451
Art. No. 503451
Art. No. 503451
Door Z sash
Door Z Art.
sash
Door Z sash Door Z sash
No. 550510 Door Z Art.
sash
Door Z sash
Art. No. 550510
Art. No. 550510 No. 541160
Art. No. 541160
Art. No. 541160
35x42 Reinforcement 35x42 Reinforcement
35x42 Art.
Reinforcement
35x42 Reinforcement
No. 350193 35x42 Art.
Reinforcement
35x42 Reinforcement
No. 350193
Art. No. 350193
Art. No. 350193 Art. No. 350193
Art. No. 350193
42x30 Reinforcement 75mm Outer frame profile
42x30 Art.
Reinforcement
42x30 Reinforcement
No. 261958 75mm Art.
Outer
75mm
No.frame
Outer
profile
503825 frame profile
183

181

Art. No. 261958

Art. No. 261958 Art. No. 503825
Art. No. 503825
183

183

181

181

Universal frame profile 35x35 Reinforcement

Universal
Art.frame
Universal
profile
frame profile
No. 546185 35x35 Art.
Reinforcement
35x35 Reinforcement
No. 287799
Art. No. 546185
Art. No. 546185 Art. No. 287799
Art. No. 287799
40x30 Reinforcement 40mm Frame Extension
40x30 Art.
Reinforcement
40x30 Reinforcement
No. 258358 40mm Art.
Frame
40mm
No.Extension
Frame Extension
561014
Art. No. 258358
Art. No. 258358 Art. No. 561014
Art. No. 561014
45mm Frame Extension 35x25 Reinforcement
45mm Art.
Frame
45mm
No.Extension
Frame Extension
546280 35x25 Reinforcement
35x25 Reinforcement
Art. No. 252775
Art. No. 546280
Art. No. 546280 Art. No. 252775
Art. No. 252775

Multi-Fold Door Schemes

Multi-Fold
Multi-Fold
Door Schemes
Multi-Fold Door Schemes
Door Schemes
Scheme 321:
Scheme 321:
Scheme 321: Scheme 651:
Scheme 651:
Scheme 651:
Scheme 330:
Scheme 330:
Scheme 330: Scheme 633:
Scheme 633:
Scheme 633:
Scheme 431:
Scheme 431:
Scheme 431: Scheme 761:
Scheme 761:
Scheme 761:
Scheme 541:
Scheme 541:
Scheme 541: Scheme 770:
Scheme 770:
Scheme 770:
Scheme 550:
Scheme 550:
Scheme 550: Scheme 743:
Scheme 743:
Scheme 743:
Scheme 523:
Scheme 523:
Scheme 523:

DETAILED DRAWINGS ARE AVAILABLE ON REQUEST

39
REHAU S706 70mm & REHAU TRITEC 60MM
MULTI-FOLD DOORS
3. PVC-U Door Systems
3.7 REHAU S706 RAUFERNO – FIRE RATED DOORS AND WINDOWS

No longer restricted by traditional fire rated materials and construction techniques, RAUFERNO gives you
the freedom to use PVC-U fire resistant windows and fire resistant doors and still comply fully with 2006
Building Regulations for most protected areas, due to full certification to BS 476 Parts 20 and 22.

The RAUFERNO PVC-U fire resistant windows and - Fire escape routes
fire resistant door system, a patented industry - Entrance halls
first, is based upon and has all of the design
- Deck access flats
and security benefits of the REHAU S706 70mm
- Fixed windows (close to other buildings)
profile. The system provides an array of design
options for you to install throughout a building in - Windows (fixed) / doors between a house and
the following areas:- integral garage
- Fixed fanlights (and sidelights coupled to doors).

40
 RAUFERNO provides you with all the safety and 1 Fixed Light
security of traditional fire rated products, but with
PVC-U’s added inherent benefits of: 2 Fixed Light Testing

3 Door and Sidelight

- Improved thermal insulation
- Sound proofing

- Characteristic low maintenance

- Excellent security options.

Fixed Light Testing (Integrity Glass)

- BS 476: Part 22 1987 – clauses 6 and 7 (30 minutes)
- Warrington Fire Research Certificate No. C81844
- Maximum sizes (Figure 2).

Fixed Light Testing (Insulated Glass)

- BS 476: Part 22 1987 – 30 minute assessment
- Warrington Report 185641
- 604mm width or 1072mm height and maximum
glazing area of 0.563m2.

Door and Sidelight Testing

- B S 476: Part 22 1987 – clauses 6 and 7
1 Door and Sidelight - 30 minutes
Single door - 60 minutes
- Warrington Fire Research Certificate
Allowable Glass Sizes
Pane Height
No. 71058-WSH and 102174.
(mm)

1200

1000

Any aspect ratio is

acceptable within
800
the boundaries
shown dotted

600

400 Tested
sizes
shown
200 thus --------

0 200 400 600 800 1000 1200

Pane Width (mm)
2

41
 PVC-U Door Systems 3.
REHAU S706 RAUFERNO – Fire Rated Doors and Windows 3.7

Specification
- 70mm frame depth
- Fire rated composite door panel
- Door opens towards fire hazard.

Door Options
- Variety of colours
Max. 2138mm

- Choice of letterboxes available in Silver, Gold,

White, Black, Brass and Stainless Steel finishes
- Choice of fire rated viewers available in Black,
White or Gold
- Choice of panel styles and colours
- Fixed panel with and without midrail.
Max. 611mm

Installation Max. 1536mm

- REHAU S706 RAUFERNO must be installed by

installers trained in recognised scheme for ‘fire
products’.
See table

2138mm

See table

611mm

41
REHAU S706 RAUFERNO
FIRE RATED DOORS AND WINDOWS
4. COnservatories

Whatever style, design and finish you choose, REHAU conservatories offer optimum structural capability
matched by stylish appearance.

REHAU window and door systems are compatible When very large spaces are required, then portal
with all major conservatory roof systems to provide frames would be considered in conjunction with
a complete product solution. your windows, doors and roof. This combination
allows structures such as swimming pool
REHAU window and door systems offer the opportunity enclosures and large function rooms for hotels or
to choose a conservatory from a variety of shapes and nursing homes to be possible and these are well
designs. Anything from the straightforward lean-to suited to adding our multi fold door offering to truly
conservatory to the more elaborate Victorian or Edwardian bring the outside, inside.
designs all rely on the structural capability that the REHAU
windows and doors provide to support the roof.

42
 4.

REHAU fabricators and installers have a reputation

for a thoroughly professional approach and pride
themselves on the friendly and knowledgeable
guidance they are able to offer at every stage of
design and installation.

The service is complete right through from helping you

plan and choose the conservatory that best matches
your needs and project, to the attention to details like
planning permission and building regulation.

43
5. REHAU Polytec 50S CURTAIN WALLING
ENERGY-EFFICIENT GLAZING SOLUTIONS

Composite curtain walling system REHAU Polytec 50S combines the benefits of Aluminium, Steel and Polymer
materials providing an outstanding thermal performance with an Uf-Value of up to 0.88 W/m2K.

Characteristics
The REHAU Polytec 50S curtain walling system is suitable for both new build and replacement, vertical or
inclined curtain walling and single or multi-storey buildings. Straight or polygon construction is also possible.

It is a slim system with face profiles measuring just - Reduced thermal losses through the building shell
50mm and combines the economics of polymer and CO2 emissions
materials with the advantages of conventional transom/ - Beneficial to meet the more stringent
mullion construction. Using a wide range of commercial requirements of Part L (Oct 2010)
steel profiles can accommodate variable static load
- Cost saving on the M&E package
factors. There is a corresponding selection of Snap-On
- System is certified by the Passive House Institute
profiles for design purposes. Other benefits include:
and suitable for Zero Carbon Buildings with an
Uf-Value up to 0.88 W/m2K.

44
 1 Isometric Transom / Mullion

2 Cross section

Appearance Structural Strength

REHAU Polytec 50S is available in white and a vast Because of the use of box steel reinforcement
range of RAL colours using the REHAU Acryl II colour sections (3 times stronger than Aluminium, ESteel =
coating system for PVC-U profiles and powder coating 210,000 N/mm2, EAlu = 70,000 N/mm2)
for aluminium profiles. Please refer to page 46. - Achieving a greater unsupported span
- Reduced profile depth for increased floor space
Insulation
- Suitable for exposed locations.
Outstanding thermal performance with Uf-Value up
to 0.88 W/m2K, enabling cost effective large glazed
Maximum Sizes
areas with reduced energy losses and for increased
Maximum mullion and transom sizes, spans and
use of natural day light.
dimensions depend on design loads. Project specific
calculations need to be carried out. Please contact
Glazing
one of our Commercial Manager or our regional Sales
The system is designed to work with glazing units
Office for further advice.
or panels from 6 – 40mm. All types of opening
elements can be included including both REHAU
Tritec and REHAU S706 window system.

45
REHAU Polytec 50S CURTAIN WALLING 5.
TECHNICAL DETAIL

REHAU POLYTEC 50S / Mullion detail

Encapsulates both REHAU 60mm and 70mm Systems

REHAU Tritec REHAU S706

Profile Design and Technical Data

Sight Lines 50mm

Range of Profile Depth 71 - 134mm
Range of Glazing Weight up to 180kg
Thermal Performance Uf = 0.88 - 1.3 W/m2K (depending on profile combination)
Max. ”I“ Value (Steel) Ix Steel up to 221 cm4 (equivalent of 663 cm4 in Aluminium)
Weather Performance (EN 12154/ENV 13050) RE 1950
Wind Resistance (EN 13116) ± 2.0kN/m2 (safety test ± 3.0kN/m2) Approvals
Air Permeability (EN 12152) AE The REHAU Polytec 50S curtain walling
system has been type tested at IFT
Impact Resistance (EN 14019) E5/I5
Rosenheim to meet with BS EN 13830.
Sound Insulation (EN ISO 140-3) RWP up to 43dB (depending on glass specification) Reports can be made available on request.

45
REHAU POLYTEC 50S
CURTAIN WALLING
6. Colours and Finishes
REHAU OFFERS ITS PVC-U SYSTEMS
IN OVER 170 DIFFERENT COLOUR OPTIONS

REHAU offers its PVC-U systems in over 170 different colour options through the use of two distinctive
systems, Acryl II colour coating and lamination.

Acryl II
The Acryl II colour coating system is the result of a There is a choice of over 150 RAL colours and the
development by our automotive division, which has system allows for optimum versatility and creative
used a similar system for many years to produce use of colour. For example, the frame and the sash
colour matched polymer car bumpers. or the inside and the outside can be finished in two
different colours. Alternatively, sills or beading can
It is a two component acrylic coating system, which be finished to contrast with the frame. Due to the
involves tightly controlled preparation, application of flexibility of the system it is suitable for both small
the cross-linking polyurethane acrylic by wet spraying and large-scale installations.
and then air curing. The finish is durable, colour fast
and weather resistant. Acryl II coating does not affect
the impact resistance of the PVC-U profile.

46
 Example laminate PVC-U options 1 Golden Oak

2 Rosewood

3 Mahogany

1 2 3 4 Cream (REHAU Heritage only)

5 Schwartz Brawn (Black)

6 Anthracite Grey

4 5 6
7 Grey

8 Natural Oak

9 White Ash
7 8 9

Laminate PVC-U
REHAU have a range of standard laminate options. For more details of availability of these systems
For most systems they are Mahogany, Golden Oak please contact your nearest REHAU Sales Office and
and Rosewood on White and Mahogany, Rosewood ask to talk to our of our Commercial Sales Managers.
and Golden Oak both sides.

A further range of 25 non-standard laminate options

are available to special order. Laminate can be
applied to the inside or outside or both sides of
white base profile and to both sides of brown and
acorn base profiles. The finish is colourfast, weather
resistant and durable.

47
7. REHAU UNDERFLOOR HEATING
THE FAVOURED CHOICE FOR INDUSTRIAL PROFESSIONALS

Underfloor heating is increasingly being specified over traditional radiator systems as the
preferred modern-day heating solution.

Underfloor Heating System REHAU EVERLOCTM - Heating and Plumbing Systems

The REHAU underfloor heating systems are The REHAU flexible pipe system consists of an
currently providing cost-effective comfort and integrated range of flexible high density cross-
safety in a variety of installations across the world, linked polyethylene (PE-Xa) pipes and slim, neat
1
including offices, factories, hospitals and schools. brass fittings. The system allows the engineer to
achieve an effective, quiet system, with features
REHAU underfloor heating provides the right making it easy to conceal and ideal for hot and cold
amount of heat in the right place and the right time systems, central heating and Underfloor Heating.
with a solution for all applications, and an intelligent A unique REHAU jointing system means the joints
control system that reduces energy wastage. are made quickly, with the result being permanent
and secure. The pipe can be supplied on a roll, or
Floor Systems: in long lengths. The REHAU pipe-in-pipe system
2 REHAU Railfix/Raufix System removes the need for a conventional ducting system
REHAU Tacker System resulting in a time saving, and maximises efficiency
REHAU Diffusion Plate System by reducing the number of joints and waste from
REHAU Floating Floor System off cuts.
REHAU Sprung Floor System
REHAU Industrial System All applications are covered: one pipe serves all
service applications from 16 to 32mm, with a
REHAU Intelligent Controls System 40 to 63mm option for mains, risers and other
3 Designed specifically for underfloor heating systems applications.
with a user-friendly control system
- F ull range of low-voltage thermostats and SOLELEC - Low cost solution and rapid installation
master control units, which can be wired up in a Whether you are planning to install underfloor
‘daisy-chain’ configuration, specifically reducing heating in houses, flats, public buildings, large
installation costs commercial sites or small conservatories you will
- Weather compensation available with REHAU FS benefit from the features of the REHAU SOLELEC
controller system.

4 - Intelligent system uses self-learning capabilities to

optimise its performance, reaching optimum levels - For more information
1 Underfloor Heating System after 3-10 days. This allows minimum overshoot
and higher comfort levels, unlike the ‘hunting’
please contact your
2 REHAU Tacker System
behaviour associated with other systems. regional Sales Office.
3 REHAU EVERLOCTM - Compression
Sleeve Joint

4 SOLELEC - Low cost solution and

rapid installation

48
Data cable management systems 8.
fast and simple

Being a leading European brand name in cable management gives REHAU a distinct edge in terms of - For more information
functional design and expertise. The development of products specifically for the UK market reflects
REHAU’s strong commitment to its UK customers. please contact your
regional Sales Office.
Whether for new build, refurbishment or retro-fit The range includes:-
into existing properties, REHAU has all the answers - 140 x 50mm and 180 x 65mm two compartment
for professional cable management systems. systems
- Designed to meet the latest standards and regulations for
PROFILA and COMPACT Data are a family of data the installation of Cat 6, Cat 6A and Cat 7 data cabling
cabling trunking systems. Both offer compartment
- Fast and simple to install
profile for fast and easy installation.
- Variable angle internal and external corners
REHAU has a portfolio that meets every need, from - Quiet aesthetics, trunking disappears into a building
office environments to specialist, commercial and - Adapter to join different sized systems together
heavy duty installations. - Adjustable depth socket box to help compliance
with BS EN 50174 requirements
-M
 odular accessories for fast installation and
reduced stock
- Compliant with all relevant regulations and standards.

49
9. REHAU window and door Summary

Product Type REHAU Tritec S706 S717 REHAU Heritage REHAU Polytec 50S

Casement Windows n n

French Windows n n

Tilt/Turn Windows n n

Fully Reversible Windows n

Pivot Windows n

Vertical Sliding Windows n

Residential Doors n n

French Doors n n

Tilt/Slide Patio Doors n n

In-Line Patio Doors n

Multi-Fold Doors n n

Composite Doors n

RAUFERNO n

Curtain Walling n

Energy Efficiency n n n n

50
 PVC-U Window and Door Systems
The Total solution for Specifiers

UK & IRELAND SALES OFFICES

London, REHAU Ltd, The Building Centre, 26 Store Street, London WC1E 7BT Phone: 0207 580 6155 Fax: 0207 307 8595 Slough, Units 5 J & K, Langley Business Centre,
Station Road, Langley, Slough SL3 8DS Phone: 01753 588500 Fax: 01753 588501 Manchester, Brinell Drive, Irlam, Manchester M44 5BL Phone: 0161 777 7400
Fax: 0161 777 7401 Glasgow, Phoenix House, Phoenix Crescent, Strathclyde Business Park, Bellshill, North Lanarkshire ML4 3NJ Phone: 01698 503700 Fax: 01698 503701
Dublin, 9 St. Johns Court, Business Park, Swords Road, Santry, Dublin 9 Phone: 00353 (0)1 8165020 Fax: 00353 (0)1 8165021

This document is protected by copyright. All rights based on this are reserved. No part of this publication may be translated, reproduced or transmitted in any form or by any
similar means, electronic or mechanical, photocopying, recording or otherwise, or stored in a data retrieval system.

www.rehau.co.uk 700.781EN/017/E&T/08.10 www.rehau.co.uk Building Solutions

Automotive
Industry