CASED SPRING MOUNT

- 25mm Standard Deflection

Laterally stable steel springs housed in telescoping close-grain cast iron casing. Effective for isolation of high
and low frequency vibrations produced by floor mounted mechanical equipment, industrial machinery, piping.

Product Features
" Springs have a deflection of 25mm at rated load
External Leveling Bolt

and are designed with 50% overload capacity, to

compensate for unexpected load variations and
to reduce operating stress.
" Springs are laterally stable, with diameter to
operating height ratios ranging from 0.85 to 1.0
" WEICCO SMC mount design provides horizontal
stability, high loading capacity and protective
spring enclosure.
" All mounts have a built-in leveling arrangement,
capable of compensating for full static deflection.
" Inner walls of lower casing have resilient rubber
snubbers which :
a) Limit lateral movement, particularly due to
start-up, shut-down and horizontal wind load.
b) Eliminate possibility of binding by providing a Cased Spring Mount with External Adjustment
smooth guide path for the top casing. (supplied as standard)
c) Prevent isolator short-circuiting by avoiding
metal to metal contact.
" Neoprene inserts below springs and 7 - 10mm
Acoustic Friction Pad

thick ribbed base pad act as noise breaks for

high frequencies in the audible range, which can Rubber Snubbers
otherwise get transmitted to building structure.
" Base pad eliminates need for bolting down in
most applications.
" Color coded springs to facilitate identification.
" Corrosion resistant, epoxy powder coated
Internal Leveling Bolt

springs and body.

Compliance - Springs designed according to

BS 1726 (Part 1) : 1987 and recommendations
made by SAE (US) Acoustic Friction Pad

Cased Spring Mount with Internal Adjustment

Typical Applications and Neoprene Pad on top (add suffix 'IR')
SMC series mounts are suitable for installation under
all types of equipment. Since the springs are laterally
restrained in cased mounts, they are particularly Options Available
recommended for outdoor installations subject to wind " Mounts with external leveling arrangement are
pressure and under equipment likely to generate supplied as standard. These offer maximum
horizontal thrust. convenience of installation and leveling. Bolt
Application examples include : Chillers, AHUs, Pumps, passes through locating holes of equipment.
Centrifugal / Axial fans, Condensing Units, Rooftop Suitable for most applications.
Packaged Units, Reciprocating Compressors, DG Sets, " Mounts with internal leveling arrangement and
Punch Presses, Drop Hammers, floor Pipe Supports extra neoprene acoustic friction pad on top (add
(normally at first few pipe support points leading from suffix 'IR'). Used when accessibility for external
isolated equipment) leveling is limited or under flat surfaces without
locating holes.
Installation
Spring mount cartons contain detailed installation guide.

Please refer overleaf for selection table..

Stockist : SMC 2B0504

Product specifications are subject to change without prior notice

 CASED SPRING MOUNT
- 25mm Standard Deflection

Selection Guidelines
Equipment Base
or frame
" The calculated weight or
External Leveling Bolt 'D' published point-load data of
Acoustic Friction Pad
equipment should ideally be
Internal Leveling Bolt 'D'
increased by a safety factor
Rubber Snubbers
of 10 to 15% and the next
higher model of isolator
Neoprene Insert selected.
" In calculating the load, please
Acoustic Friction Pad
take care to consider
variables such as weight of
Cased Spring Mount with Internal Adjustment
water and attached pipe
and Neoprene Pad on top (add suffix 'IR')
fittings / valves, inertia base
d
etc.

Cased Spring Mount with External Adjustment

(supplied as standard)

SELECTION TABLE FOR 25MM DEFLECTION CASED SPRING MOUNTS

Isolator Rated Spring Dimensions (mm)
Model Load (kg) Color(s) L W H* HIR* A BC D d
SMC-A50 50 Black
SMC-A100 100 Blue
137 55 98 114 87 120 3/8" 12
SMC-A150 150 Grey
SMC-A200 200 Orange
SMC-B200 200 Black
SMC-B250 250 Yellow
165 67 112 132 107 145 1/2" 14
SMC-B300 300 Blue
SMC-B400 400 Grey
SMC-C400 400 Brown
SMC-C500 500 Grey 187 80 134 158 129 165 5/8" 14
SMC-C600 600 Orange
SMC-C700 700 Green
SMC-C800 800 Pink
SMC-C1000 1000 White
187 80 146 170 129 165 5/8" 14
SMC-C1200 1200 Purple
SMC-C1400 1400 Purple / Yellow
SMC-C1600 1600 Purple / White
SMC-2C2000 2000 White
SMC-2C2400 2400 Purple
277 80 156 185 219 255 7/8" 14
SMC-2C2800 2800 Purple / Yellow
SMC-2C3200 3200 Purple / White
SMC-4C4000 4000 White
SMC-4C4800 4800 Purple
261 155 165 199 203 239 1" 14
SMC-4C5600 5600 Purple / Yellow
SMC-4C6400 6400 Purple / White

* Represents average free height in each grouping of models. Height of some models in group may vary slightly from this figure.

Please refer overleaf for product details..

Stockist : SMC 2B0504

Product specifications are subject to change without prior notice