Scribd
Upload
487 views

1.point Lesson SL

This one point lesson sheet provides instructions for evaluating the squareness and parallelism of big end assemblies. It states that an assembly is OK if it freely rotates in a squareness gauge, indicating proper squareness and parallelism. If the assembly does not freely rotate, it is not OK due to issues with squareness or parallelism. The lesson was taught to several individuals, who were then evaluated on their understanding of how to check for these issues on big end assemblies.

Uploaded by

Prasanna Balaji
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
487 views

1.point Lesson SL

This one point lesson sheet provides instructions for evaluating the squareness and parallelism of big end assemblies. It states that an assembly is OK if it freely rotates in a squareness gauge, indicating proper squareness and parallelism. If the assembly does not freely rotate, it is not OK due to issues with squareness or parallelism. The lesson was taught to several individuals, who were then evaluated on their understanding of how to check for these issues on big end assemblies.

Uploaded by

Prasanna Balaji
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

One Point Lesson Learn Sheet

OP. NAME : - FINAL INSPECTION Date Created :- 13.01.2020


MODEL NAME MHI SL expires on :-
THEME: VISUAL AIDS BIG END SQUARENESS AND FACE PARALLELISM
OK MEANS - ASSEMBLY FREELY ROTATE IN SQUARENESS GAUGE.
Basic knowledge
NOT OK MEANS - ASSEMBLY NOT FREELY ROTATE IN SQUARENESS GAUGE.

LESSON LEARNT:-B.E. SQUARENESS AND FACE PARALLELISM FIRE ISSUE

NOT FREELY ROTATE FREELY ROTATE

NOT OK OK PART
ASSEMBLY NOT FREELY ROTATE IN SQUARENESS GAUGE DUE PARALLALISM
ASSEMBLY FREELY ROTATE IN SQUARENESS GAUGE.
AND SQUARNESS FIRE
Who SAMEER.P BHAGWAN BHAGWAN P.PANDI P.PANDI
To whom BHAGWAN P.PANDI DATIR SOMANATH VIKRAM
Evaluation of skills * 4 4 4 4 4
Date/Month 13.01.2020 13.01.2020 13.01.2020 13.01.2020 13.01.2020

PREPARED BY APROVED BY

BHAGWAN GUND SAMEER POTDAR

NOTE - * 1.does not understand, 2.understand intellectually ,3.can perform procedure partialy, 4 can perform procedure with confidence.

QR/MFG/32/One point lesson sheet.7.3.1 ,10.09.2017

You might also like