Scribd
Upload
126 views

Seeflex 040E

Seeflex 040E is a clear thermoplastic polyurethane alloy used on stationary, vibratory, and gyratory sifters, screeners, feeders, bin discharges, hoppers, conveyors, and packing equipment. It has a Shore A hardness of 90, is chemically resistant, abrasion resistant, and dust control sleeves and transitions made from it are the first choice for dust-free factories.

Uploaded by

Arst
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
126 views

Seeflex 040E

Seeflex 040E is a clear thermoplastic polyurethane alloy used on stationary, vibratory, and gyratory sifters, screeners, feeders, bin discharges, hoppers, conveyors, and packing equipment. It has a Shore A hardness of 90, is chemically resistant, abrasion resistant, and dust control sleeves and transitions made from it are the first choice for dust-free factories.

Uploaded by

Arst
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

| PRODUCT SPEC SHEET

Seeflex 040E
• Used on all types of stationary, vibratory and Physical Properties
gyratory sifters, screeners, feeders, bin discharges,
Surface Finish Gloss/Gloss
hoppers, conveyors, packing equipment or any
product handling equipment. Hardness (Shore A) 90

• Seeflex 040E is a clear ether based thermoplastic Wall Thickness 0.9 mm / 1/32 inch
polyurethane alloy. Having no memory Seeflex
Tensile Strength (MPa) 40
040E will not fracture as a result of constant
flexing. -25 to 110˚C
Operating Temp Range
-13 to 230˚F
• Superior chemical resistance for CIP and washing.
Max. Surge Temp 120˚C / 248˚F

• Excellent abrasion resistance. Low Temp / Flexibility Good

• Smooth welded seam. Ultimate Elongation (%) 593

• Dust control sleeves and transitions, the 1st choice Tear Strength – Die C (N) 67
for dust free factories.
Surface Resistivity (0hms)* 1010

100% Modulus (Mpa) 8.0

300% Modulus (Mpa) 15.6

Air Permeability 0

Atex Compliant: IBExU tested. Can be used in all


dust explosion hazardous areas.
(Some restrictions apply - a copy of certification is
available on request).
Complies with the following regulations:
FDA CFR 177.1680 and 177.2600
(EC) 1935/2004, 2023–2006, 10/2011 USDA
and 3A (20-).

* Tested to ASTM D-257

BFM® GLOBAL LTD. | EMAIL: [email protected] | WEB: BFMfitting.com PRODUCT SPEC SHEET- SEEFLEX 040E
V5 MAY 2017 PAGE 1 OF 1

You might also like