Scribd
Upload
281 views2 pages

SSD Syllabus Ee8601

This document outlines the objectives and topics to be covered in the course EE8601 Solid State Drives. The course aims to impart knowledge on steady state operation and transient dynamics of motor loads, analysis of converter/chopper fed DC drives, operation of AC motor drives, and design of current and speed controllers for closed loop solid state DC motor drives. The course is divided into five units covering drive characteristics, converter/chopper fed DC drives, induction motor drives, synchronous motor drives, and design of controllers for drives. The expected outcomes include the ability to understand solid state drives, select suitable drives for applications, and analyze and design components of closed loop solid state drives.

Uploaded by

venki4you
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
281 views2 pages

SSD Syllabus Ee8601

This document outlines the objectives and topics to be covered in the course EE8601 Solid State Drives. The course aims to impart knowledge on steady state operation and transient dynamics of motor loads, analysis of converter/chopper fed DC drives, operation of AC motor drives, and design of current and speed controllers for closed loop solid state DC motor drives. The course is divided into five units covering drive characteristics, converter/chopper fed DC drives, induction motor drives, synchronous motor drives, and design of controllers for drives. The expected outcomes include the ability to understand solid state drives, select suitable drives for applications, and analyze and design components of closed loop solid state drives.

Uploaded by

venki4you
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 2

EE8601 SOLID STATE DRIVES LTPC

3 00 3

OBJECTIVES:

To impart knowledge on the following Topics

 Steady state operation and transient dynamics of a motor load system.


 Analyze the operation of the converter/chopper fed dc drive, both qualitatively and
quantitatively.
 Operation and performance of AC motor drives.
 Analyze and design the current and speed controllers for a closed loop solid state DC
motor drive.

UNIT I DRIVE CHARACTERISTICS 9


Electric drive – Equations governing motor load dynamics – steady state stability – multi
quadrant Dynamics: acceleration, deceleration, starting & stopping – typical load torque
characteristics – Selection of motor.

UNIT II CONVERTER / CHOPPER FED DC MOTOR DRIVE 9


Steady state analysis of the single and three phase converter fed separately excited DC motor
drive– continuous conduction – Time ratio and current limit control – 4 quadrant operation of
converter / chopper fed drive-Applications.

UNIT III INDUCTION MOTOR DRIVES 9


Stator voltage control–V/f control– Rotor Resistance control-qualitative treatment of slip
power recovery drives-closed loop control–– vector control- Applications.

UNIT IV SYNCHRONOUS MOTOR DRIVES 9


V/f control and self-control of synchronous motor: Margin angle control and power factor
control- Three phase voltage/current source fed synchronous motor- Applications.

UNIT V DESIGN OF CONTROLLERS FOR DRIVES 9


Transfer function for DC motor / load and converter – closed loop control with Current and
speed feedback–armature voltage control and field weakening mode – Design of controllers;
current controller and speed controller- converter selection and characteristics.
TOTAL : 45 PERIODS
OUTCOMES:
 Ability to understand and suggest a converter for solid state drive.
 Ability to select suitability drive for the given application.
 Ability to study about the steady state operation and transient dynamics of a motor
load system.
 Ability to analyze the operation of the converter/chopper fed dc drive.
 Ability to analyze the operation and performance of AC motor drives.
 Ability to analyze and design the current and speed controllers for a closed loop solid
state DC motor drive.

TEXT BOOKS:
1. Gopal K.Dubey, Fundamentals of Electrical Drives, Narosa Publishing House, 1992.
2. Bimal K.Bose. Modern Power Electronics and AC Drives, Pearson Education, 2002.
3. R.Krishnan, Electric Motor & Drives: Modeling, Analysis and Control, Pearson,
2001.

REFERENCES
1. Vedam Subramanyam, “ Electric Drives Concepts and Applications ”, 2e, McGraw
Hill, 2016
2. Shaahin Felizadeh, “Electric Machines and Drives”, CRC Press (Taylor and Francis
Group), 2013.
3. John Hindmarsh and Alasdain Renfrew, “Electrical Machines and Drives System,”
Elsevier 2012.
4. Theodore Wildi, “ Electrical Machines ,Drives and power systems ,6th edition,
Pearson Education ,2015
5. N.K. De., P.K. SEN” Electric drives” PHI, 2012.

You might also like