CETPA INFOTECH PVT. LTD.

CURRICULUM FOR PLC & SCADA

MODULE : 1
(PLC & SCADA) LADDER LOGIC PROGRAMMING

 Comparison b/w Gates, Relay Logic& ladder

logic
INTRODUCTION TO AUTOMATION
 Description of using Memory bit in a
programming
 Brief Description of a Control System
 Mathematical Concept ADD,SUB,MUL,DIV and
 Pneumatic Controller, PID Controller, PLC
etc
Controller
 Logical Concept AND,ANI,OR,ORI, EXOR,NOT
 History & Need of Industrial Automation
etc
 Application of Industrial Automation
 Special Function MOV,SET,RST,CMP,INC,DEC
 Basic Components of Automation
 Programming based on Timer And Counter
 Hardware Classification of Automation
GETTING FAMILIAR WITH SCADA OF
GETTING FAMILIAR WITH PLCOF ALLEN BRADLEY WONDERWARE

 Type of PLC
 Introduction to SCADA Software
 Hardware & Architecture of PLC
 Creating new SCADA Project
 Application and Advantage of PLCs
 GUI Designing
 Sourcing and Sinking concept
 Tag Substitutions
 Programming Language of a PLC
 Dynamic Process Mimic
 Introduction to field Device(Input/output)
 Real Time Trend
 Data files in PLC Programming
 Historical Trend
 Brief Description of a Logic Gates
 How to create Alarms & Event
 Simulator analysis of a PLC Programming
 Recipe Management
 Communication with PLC
 Introduction to graphic Properties like Sizing,
 Wiring different field device to PLC Blinking, Filling, Analog Entry, Movement of
 Uploading, Downloading & Monitoring Objects ,Visibility etc.
programs  Net DDE Communication
 Introduction to SFC  Application of scripts
 Introduction to Instruction List  Communication with PLC
 Introduction to Ladder Logic

ADVANCE PROGRAMMING IN PLC

 Introduction to jump and label instruction.

 Introduction to SBR and JSR instruction.
 Forcing of I/O
 Monitoring/Modifying Data table values
 Hands on experience on real time applications
 Fault finding/troubleshooting and
documentation
 Interfacing proximity sensor with PLC
 Interfacing with Relay
 Control circuit designing with feedback concept.
 MODULE 2
(RELAY & SENSOR INTERFACING) SENSOR AND PROCESS
INSTRUMENTATION

RELAY LOGIC
 Introduction to various
 Basic principle of Relay working Sensors/Instrumentation used in a Industry
 Making AND ,OR gate ,NOT gate logic circuit  Temperature measurement (Thermocouple,
 Interfacing relay with sensor RTD, thermistor )
 Relay based Control designing  Working on the proximity sensor
 Interconnection between Different Relay &  Introduction to limit switch
Switch`s  Working on the photo electric sensor
 Temperature controller
 Level sensor
CONTACTOR WORKING  Flow measurement and its working principle
 Pressure measurement and its working
principle
 DOL Starter
 LVDT Displacement Sensor
 Forward And Reverse DOL
 Star Delta Starter(including timer)  Load and level measurement
 Solenoid valve working and it`s Principle
 Interlocking Circuit
 Making Switches by using Sensor
 Inching process

 Contactor Based control Diagram
MOTION CONTROL SYSTEM(VFD OF ALLEN
BRADLEY))
TIMER INTERFACING
 AC Motor and its working
 Basic Principle of Industrial Timer  Introduction to Stepper and Servo motor
 Delay generation  Motor control circuit, interlocking circuit
 Wiring connection of timer to the different  Introduction to AC Drives & application
device  Drive Parameter programming
 Controlling switching between different  VFD controlling through Keypad ,External switch
devices and PLC
 Interfacing with relay and contactor  Basic Criteria for drives selection
 Alarm generation  Drive Control Panel system designing
 CONTROL PANEL DESIGNING
AUTOCAD DESIGNING ( 2D Drafting)

 Creating and managing workspace  Discussion on Type of Switches;- PB, E- PB,

 Erasing Object,Cancelling & Undoing a Toggle Switches, Selector switches, Limit
command Switches
 Object selection method  Introduction to Contactor and it’s Working
 Setting unit and limits  Miniature Circuit Breaker
 Drawing arc,rectangle,ellipses,polygon  Molded Case Circuit Breaker
 Edit ,Move,copy& paste command  Over Load Relay
 Offset,rotate,&scale,fillet,Chamfering,trim ,  Motor Protection Circuit Breaker
ExtendStretch & lengthen command  Basic of Control & power drawing
 Zooming & Panning drawing  General wiring guidelines in a panel Designing
 Electrical Wiring Designing through Autocad  Panel Indicator (Multifunction meter
 Control panel designing through Autocad ,ammeter, Voltmeter)
 Preparation of general arrangement diagrams,
busbar sizing
HMI (HUMAN MACHINE INTERFACE) OF  Electrical Protection
ALLEN BRADLEY  General wiring guidelines / practices
 Load management (connected load, running
 Getting started with HMI load ,load factor)
 Creating applications, creating tags  Maintenance & troubleshooting of control
 Downloading and uploading Programs circuit in live panels.
 Creating GUI screen on the HMI
 Alarm Messages INDUSTRIAL NETWORKING
 Communicating with PLC
Fault diagnostics and Troubleshooting  Taking different device through network
 Different Networking Topologies and their
importance
 Communicating with Nodes, Ports, drivers and
Hardware
 DH-485, Eternet , DeviceNet , ControlNet,
Modbus, Profibus, fieldBus
 MODULE 3:
WORKING WITH OTHER PLC’S(DELTA AND
HMI (HUMAN MACHINE INTERFACE) OF MITSUBISHI)
DELTA
 Working with number of other PLC
 Getting started with HMI  Hardware overview of that PLC
 Creating applications, creating tags  Description of Programming language
 Downloading and uploading Programs  Uploading /Downloading and Monitoring the
 Creating GUI screen on the HMI program
 Alarm Messages  Data files in used in a PLC
 Communicating with PLC  Interfacing with Relay
Fault diagnostics and Troubleshooting  Control circuit designing with feedback concept
 Interfacing proximity sensor with PLC
 Communication with PC
MOTION CONTROL SYSTEM(VARIABLE  Wiring different field device to PLC
FREQUENCY DRIVE OF DELTA)  Simulator analysis of a PLC Programming
 Fault finding and Troubleshooting
 AC Motor and its working  Description of using Memory bit in a
 Introduction to Stepper and Servo motor programming
 Motor control circuit, interlocking circuit  Mathematical & logical concept
 Introduction to AC Drives & application  Compare and jump statement
 Drive Parameter programming  Advance control function operation
 VFD controlling through Keypad ,External  Fault diagnostics and Troubleshooting
switch and PLC
 Basic Criteria for drives selection WORKING WITH DIFFERENT SCADA TOOLS (RS VIEW
 Drive Control Panel system designing 32 – ALLEN BRADLEY )

 Introduction to other SCADA

AUTOCAD DESIGNING ( 2D ADVANCE)  Communication through DDE/OPC/DIRECT
driver
• Arraying ,Mirroring, Breaking, dividing &joining  Various other related properties
 Hatch and gradient  Features – recipe , security, trends, data
 Tool palette Base connectivity, alarm
 Region , explode

HEAD OFFICE: 200, Purwavali , 2nd Floor ,(Opp. Railway Ticket Agency), Railway Road , Ganeshpur,
Roorkee – 247667 Ph.No.: 09219602769, 01332-270218 , Fax – 1332- 274960
CORPORATE OFFICE: D-58, Sector-2, Near Red FM. Noida -201301, Uttar Pradesh
Contact Us: +91-9212172602 , 0120-4535353
BRANCH OFFICE: 401 A, 4th Floor, LekhrajKhazana, Faizabad Road, Indira Nagar, Lucknow-226016 (U.P.)
Ph. No: +91-522-6590802, +91-9258017974, Fax No: +91-522-6590802
BRANCH OFFICE: 105, MohitVihar, Near Kamla Palace, GMS Road, Dehradun-248001, UK
Contact: +91-9219602771, 0135-6006070
Toll Free- 1800-8333-999 (from any network)