1.1 1.2 1.3 1.4 1.5 1.6 1.7 1.8 1.9 1.10 1.11 1.12 1.13 1.14 1.

1.5 1.6 1.7 1.8 1.9 1.10 1.11 1.12 1.13 1.14 1.15 1.16 1.17 1.18 1.19
ARCHITECTS

GENERAL NOTES
COPYRIGHT OF THIS DRG REMAINS WITH HAO ARCHITECTS AND MAY NOT BE
REPRODUCED WITHOUT PRIOR WRITTEN CONSENT.
DO NOT SCALE DRGS. DIMENSIONS ON THE DRGS GOVERN
ALL DIMENSIONS ARE IN MILLIMETRES UNLESS NOTED OTHERWISE.
ALL DIMENSIONS SHALL BE CHECKED / VERIFIED ON SITE BEFORE PROCEEDING
WITH THE WORK.
ANY AREAS INDICATED ON THIS SHEET ARE APPROXIMATE AND INDICATIVE ONLY
CONTRACTOR SHALL NOTIFY IN WRITING OF ANY DISCREPANCIES 60 DAYS
BEFORE COMMENCEMENT OF WORK
ALL PROPOSED WORKS TO BE CARRIED OUT IN ACCORDANCE WITH HAO
ARCHITECTS DESIGN DRAWINGS, TECHNICAL SPECIFICATIONS AND SCHEDULES
FOR ARCHITECTURAL WORKS.
55300 ALL SPECIALIST CONSULTANTS AS LISTED BELOW SHOULD CO-ORDINATE THEIR
DESIGNS IN ACCORDANCE WITH HAO ARCHITECTS DESIGN DRAWINGS.
- STRUCTURAL DESIGN.
- LIFE AND SAFETY
350 2200 3700 5800 3700 3700 3700 3700 1850 1850 3700 3700 3700 3700 3700 3700 2200 350 - MEP SERVICES.
READ THIS DRAWING IN CONJUNCTION WITH ALL OTHER CONSULTANT'S AND
SPECIALIST'S DRAWINGS, DETAILS, SCHEDULES AND SPECIFICATIONS
FIT OUT CONTRACTOR MUST PREPARE FULL SHOP DRAWINGS AND MATERIALS
SUBMITTALS WITH SPECIFIC REFERENCE TO SITE CONDITIONS FOR H-AO
1 1 APPROVAL PRIOR TO MANUFACTURE INSTALLATION AND SHOULD BE CO-
ORDINATED WITH ALL CONSULTANTS INVOLVED.
A-T1-301 A-T1-303 ALL CONSULTANTS, SPECIALISTS, SUPPLIERS, MANUFACTURERS, ETC. MUST
REFER TO GENERAL LAYOUT PLANS FOR ACTUAL LOCATIONS OF APARTMENTS.
FIGURED DIMENSIONS ARE TO BE USED IN PREFERENCE TO SCALES. ALL
DIMENSIONS MUST BE CHECKED AGAINST SITE SIZES BEFORE COMMENCING
WORK.
DRAWING CONVEY THE DESIGN INTENT. CONTRACTOR TO PREPARE COORDINATED
SHOP DRAWINGS OF ALL DISCIPLINES BEFORE CONSTRUCTION ON SITE.
FIT OUT CONTRACTOR MUST APPLY FIRE RETARDANT LACQUER TO ALL
MILLWORKS AND VENEERED PANELS WITH A PRODUCT WHICH IS COMPLIANT TO
ALL CIVIL DEFENSE REQUIREMENTS FOR SURFACE SPREAD OF FLAME.
CONTRACTOR MUST SUBMIT APPROVED CERTIFICATES ON COMPLETION OF THE
WORKS ON SITE.
1.A 1.A
1550

1550
KEY PLAN

1.B 1.B
6250

6250
1.C 1.C
3050

3050
S.E. - 1600 x 2400 ELECTRICAL RM MECHANICAL SHAFT
P.E. - 1600 x 1550 P.E. - 1600 x 1550 5 m² 5 m²
P.E. - 1600 x 1550 P.E. - 1600 x 1550

1.D 1.D
900

900 900
23500

23500
1 BMS/CONTROL WATER TANK PUMP ROOM
A-T1-304 1.E LOBBY
27 m² ROOM/FCC 10.80M X 7.90M 10.8M X 7.80M
LOBBY
23 m² 1.E
900

3.40M x 7.90M

1.F UP 1.F

STAIRCASE 2
STAIRCASE 1
3050

3050
13 m²
13 m²

SERVICES
S.P.D. 7 m²
1 S.P.D.
2 m²
3 m²
A-T1-302

1.G 1.G
6250

6250
NON ACCESSIBLE AREA

R0 06/12/2019 FOR APPROVAL CLIENT

NO. DATE DESCRIPTION ISSUED TO

NOT FOR CONSTRUCTION

1.H 1.H
1550

1550
MAIN CONSULTANT / ARCHITECT / INTERIOR DESIGNER
STRUCURAL DESIGNER / MEP DESIGNER

1.J 1.J HAO ARCHITECTURAL & ENGINEERING CONSULTANCY

P.O. Box 25646, Dubai United Arab Emirates
T +9714-358 6660
F +9714-358 6663
E [email protected]

CLIENT

MR. PESHRAW AGHA

PROJECT

EMPIRE SQUARE
350 2200 3700 5800 3700 3700 3700 3700 1850 1850 3700 3700 3700 3700 3700 3700 2200 350 PARCEL 5
EMPIRE WORLD
55300 BLOCK 1
DRAWING TITLE

GA PLANS
BASEMENT LEVEL - 02
1.1 1.2 1.3 1.4 1.5 1.6 1.7 1.8 1.9 1.10 1.11 1.12 1.13 1.14 1.15 1.16 1.17 1.18 1.19
RESIDENTIAL FLOOR PLAN
SCALE DATE ISSUED BY

1 : 100 06/12/2019 MR
PROJECT NO. DRAWING NUMBER REVISION

H201504 A-T1-098 R0
ISSUED FOR

APPROVAL
ARCHITECTURE

SCHEMATIC DESIGN STAGE

© HAO 2019 PRINTED - 12/5/2019 8:27:00 PM
 1.1 1.2 1.3 1.4 1.5 1.6 1.7 1.8 1.9 1.10 1.11 1.12 1.13 1.14 1.15 1.16 1.17 1.18 1.19
ARCHITECTS

GENERAL NOTES
COPYRIGHT OF THIS DRG REMAINS WITH HAO ARCHITECTS AND MAY NOT BE
REPRODUCED WITHOUT PRIOR WRITTEN CONSENT.
DO NOT SCALE DRGS. DIMENSIONS ON THE DRGS GOVERN
ALL DIMENSIONS ARE IN MILLIMETRES UNLESS NOTED OTHERWISE.
ALL DIMENSIONS SHALL BE CHECKED / VERIFIED ON SITE BEFORE PROCEEDING
WITH THE WORK.
ANY AREAS INDICATED ON THIS SHEET ARE APPROXIMATE AND INDICATIVE ONLY
CONTRACTOR SHALL NOTIFY IN WRITING OF ANY DISCREPANCIES 60 DAYS
BEFORE COMMENCEMENT OF WORK
ALL PROPOSED WORKS TO BE CARRIED OUT IN ACCORDANCE WITH HAO
ARCHITECTS DESIGN DRAWINGS, TECHNICAL SPECIFICATIONS AND SCHEDULES
FOR ARCHITECTURAL WORKS.
55300 ALL SPECIALIST CONSULTANTS AS LISTED BELOW SHOULD CO-ORDINATE THEIR
DESIGNS IN ACCORDANCE WITH HAO ARCHITECTS DESIGN DRAWINGS.
- STRUCTURAL DESIGN.
- LIFE AND SAFETY
350 2200 3700 5800 3700 3700 3700 3700 1850 1850 3700 3700 3700 3700 3700 3700 2200 350 - MEP SERVICES.
READ THIS DRAWING IN CONJUNCTION WITH ALL OTHER CONSULTANT'S AND
SPECIALIST'S DRAWINGS, DETAILS, SCHEDULES AND SPECIFICATIONS
FIT OUT CONTRACTOR MUST PREPARE FULL SHOP DRAWINGS AND MATERIALS
SUBMITTALS WITH SPECIFIC REFERENCE TO SITE CONDITIONS FOR H-AO
1 1 APPROVAL PRIOR TO MANUFACTURE INSTALLATION AND SHOULD BE CO-
ORDINATED WITH ALL CONSULTANTS INVOLVED.
A-T1-301 A-T1-303 ALL CONSULTANTS, SPECIALISTS, SUPPLIERS, MANUFACTURERS, ETC. MUST
REFER TO GENERAL LAYOUT PLANS FOR ACTUAL LOCATIONS OF APARTMENTS.
FIGURED DIMENSIONS ARE TO BE USED IN PREFERENCE TO SCALES. ALL
DIMENSIONS MUST BE CHECKED AGAINST SITE SIZES BEFORE COMMENCING
WORK.
DRAWING CONVEY THE DESIGN INTENT. CONTRACTOR TO PREPARE COORDINATED
SHOP DRAWINGS OF ALL DISCIPLINES BEFORE CONSTRUCTION ON SITE.
FIT OUT CONTRACTOR MUST APPLY FIRE RETARDANT LACQUER TO ALL
MILLWORKS AND VENEERED PANELS WITH A PRODUCT WHICH IS COMPLIANT TO
ALL CIVIL DEFENSE REQUIREMENTS FOR SURFACE SPREAD OF FLAME.
CONTRACTOR MUST SUBMIT APPROVED CERTIFICATES ON COMPLETION OF THE
WORKS ON SITE.
1.A 1.A
1550

1550
KEY PLAN

1.B 1.B
6250

6250
1.C 1.C
3050

3050
S.E. - 1600 x 2400 ELECTRICAL RM
5 m² MECHANICAL SHAFT
P.E. - 1600 x 1550 P.E. - 1600 x 1550 5 m² P.E. - 1600 x 1550 P.E. - 1600 x 1550
1.D PMRS ROOM (LPG) ELE. CABINATE
3.40M x 7.90M 3.50M X 4.85M

1.D
900

900 900
23500

23500
1 WATER TANK LVSG ROOM
A-T1-304 1.E LOBBY
27 m² 10.80M X 7.90M 7.10M X 7.80M
LOBBY
21 m² 1.E
900

1.F
1.F UP
STAIRCASE 1
3050

3050
GARBAGE RM
4 m²
13 m²

S.P.D. S.P.D.
1 2 m² 3 m²
A-T1-302 UP

1.G 1.G
6250

6250
R0 06/12/2019 FOR APPROVAL CLIENT
NO. DATE DESCRIPTION ISSUED TO

NOT FOR CONSTRUCTION

1.H 1.H
1550

1550
MAIN CONSULTANT / ARCHITECT / INTERIOR DESIGNER
STRUCURAL DESIGNER / MEP DESIGNER

1.J 1.J HAO ARCHITECTURAL & ENGINEERING CONSULTANCY

P.O. Box 25646, Dubai United Arab Emirates
T +9714-358 6660
F +9714-358 6663
E [email protected]

CLIENT

MR. PESHRAW AGHA

PROJECT

EMPIRE SQUARE
350 2200 3700 5800 3700 3700 3700 3700 1850 1850 3700 3700 3700 3700 3700 3700 2200 350 PARCEL 5
EMPIRE WORLD
55300 BLOCK 1
DRAWING TITLE

GA PLANS
BASEMENT LEVEL - 01
1.1 1.2 1.3 1.4 1.5 1.6 1.7 1.8 1.9 1.10 1.11 1.12 1.13 1.14 1.15 1.16 1.17 1.18 1.19 LOWER AND UPPER BASEMENT
RESIDENTIAL FLOOR PLAN
SCALE DATE ISSUED BY

1 : 100 06/12/2019 MR
PROJECT NO. DRAWING NUMBER REVISION

H201504 A-T1-099 R0
ISSUED FOR

APPROVAL
ARCHITECTURE

SCHEMATIC DESIGN STAGE

© HAO 2019 PRINTED - 12/5/2019 8:27:02 PM
 1.1 1.2 1.3 1.4 1.5 1.6 1.7 1.8 1.9 1.10 1.11 1.12 1.13 1.14 1.15 1.16 1.17 1.18 1.19
ARCHITECTS

GENERAL NOTES
COPYRIGHT OF THIS DRG REMAINS WITH HAO ARCHITECTS AND MAY NOT BE
REPRODUCED WITHOUT PRIOR WRITTEN CONSENT.
DO NOT SCALE DRGS. DIMENSIONS ON THE DRGS GOVERN
ALL DIMENSIONS ARE IN MILLIMETRES UNLESS NOTED OTHERWISE.
ALL DIMENSIONS SHALL BE CHECKED / VERIFIED ON SITE BEFORE PROCEEDING
WITH THE WORK.
55300 ANY AREAS INDICATED ON THIS SHEET ARE APPROXIMATE AND INDICATIVE ONLY
CONTRACTOR SHALL NOTIFY IN WRITING OF ANY DISCREPANCIES 60 DAYS
BEFORE COMMENCEMENT OF WORK
2400 47550 ALL PROPOSED WORKS TO BE CARRIED OUT IN ACCORDANCE WITH HAO
ARCHITECTS DESIGN DRAWINGS, TECHNICAL SPECIFICATIONS AND SCHEDULES
FOR ARCHITECTURAL WORKS.
350 2200 3700 5800 3700 3700 3700 3700 1850 1850 3700 3700 3700 3700 3700 900 ALL SPECIALIST CONSULTANTS AS LISTED BELOW SHOULD CO-ORDINATE THEIR
DESIGNS IN ACCORDANCE WITH HAO ARCHITECTS DESIGN DRAWINGS.
RETAIL24 - STRUCTURAL DESIGN.
- LIFE AND SAFETY
- MEP SERVICES.
READ THIS DRAWING IN CONJUNCTION WITH ALL OTHER CONSULTANT'S AND
SPECIALIST'S DRAWINGS, DETAILS, SCHEDULES AND SPECIFICATIONS

8050

8050
FIT OUT CONTRACTOR MUST PREPARE FULL SHOP DRAWINGS AND MATERIALS
SUBMITTALS WITH SPECIFIC REFERENCE TO SITE CONDITIONS FOR H-AO
1 1 APPROVAL PRIOR TO MANUFACTURE INSTALLATION AND SHOULD BE CO-
ORDINATED WITH ALL CONSULTANTS INVOLVED.
A-T1-301 A-T1-303 ALL CONSULTANTS, SPECIALISTS, SUPPLIERS, MANUFACTURERS, ETC. MUST
A-T1-203 REFER TO GENERAL LAYOUT PLANS FOR ACTUAL LOCATIONS OF APARTMENTS.
FIGURED DIMENSIONS ARE TO BE USED IN PREFERENCE TO SCALES. ALL
DIMENSIONS MUST BE CHECKED AGAINST SITE SIZES BEFORE COMMENCING
WORK.
3 DRAWING CONVEY THE DESIGN INTENT. CONTRACTOR TO PREPARE COORDINATED
RETAIL23 SHOP DRAWINGS OF ALL DISCIPLINES BEFORE CONSTRUCTION ON SITE.
FIT OUT CONTRACTOR MUST APPLY FIRE RETARDANT LACQUER TO ALL
MILLWORKS AND VENEERED PANELS WITH A PRODUCT WHICH IS COMPLIANT TO
ALL CIVIL DEFENSE REQUIREMENTS FOR SURFACE SPREAD OF FLAME.
CONTRACTOR MUST SUBMIT APPROVED CERTIFICATES ON COMPLETION OF THE
WORKS ON SITE.
1.A 1.A
1550

1550

1550
KEY PLAN

1.B 1.B
6250

6250
EXIT PASSAGE SERVICES ENT.LOBBY ENT.LOBBY MAIN TELEPHONE TRANSFORMER ROOM ENT LOBBY SERVICES RETAIL22
1.50M WIDE 7.50M X 5.80M 7.10M X 10.85M 7.10M X 10.85M 7.10M x 10.85M 7.10M X 10.85M 7.10M X 5.80M
ROOM / GSM ROOM
3.40M X 6.85M

31550
1.C 1.C
3050

3050
ELECTRICAL RM
S.E. - 1600 x 2400 5 m² MECHANICAL SHAFT
P.E. - 1600 x 1550 P.E. - 1600 x 1550 P.E. - 1600 x 1550 P.E. - 1600 x 1550
1.D 5 m²
1.D
900

900 900
23500

23500
1
A-T1-304 1.E A-T1-204 4 1.E
2 A-T1-202
900
21950

1.F EXIT PASSAGE 1.F

STAIRCASE 1

1.50M WIDE
3050

3050
GARBAGE RM
12 m²

4 m²
S.P.D. S.P.D.
1 2 m² 3 m²
A-T1-302 UP

1.G 1.G
6250

6250
R0 06/12/2019 FOR APPROVAL CLIENT
NO. DATE DESCRIPTION ISSUED TO

NOT FOR CONSTRUCTION

1.H 1.H
1550

1550
MAIN CONSULTANT / ARCHITECT / INTERIOR DESIGNER
STRUCURAL DESIGNER / MEP DESIGNER

1.J 1.J HAO ARCHITECTURAL & ENGINEERING CONSULTANCY

P.O. Box 25646, Dubai United Arab Emirates
T +9714-358 6660
F +9714-358 6663
E [email protected]

CLIENT
1 MR. PESHRAW AGHA
A-T1-201
PROJECT

350 2200 3700 5800 3700 3700 3700 3700 1850 1850 3700 3700 3700 3700 3700 3700 2200 350 1650 EMPIRE SQUARE
PARCEL 5
2400 54550 EMPIRE WORLD
55300 1650 BLOCK 1
DRAWING TITLE

GA PLANS
GROUND LEVEL
1.1 1.2 1.3 1.4 1.5 1.6 1.7 1.8 1.9 1.10 1.11 1.12 1.13 1.14 1.15 1.16 1.17 1.18 1.19 LOWER AND UPPER GROUND
RESIDENTIAL FLOOR PLAN
SCALE DATE ISSUED BY

1 : 100 06/12/2019 MR
PROJECT NO. DRAWING NUMBER REVISION

H201504 A-T1-100 R0
ISSUED FOR

APPROVAL
ARCHITECTURE

SCHEMATIC DESIGN STAGE

© HAO 2019 PRINTED - 12/5/2019 8:27:04 PM
 1.1 1.2 1.3 1.4 1.5 1.6 1.7 1.8 1.9 1.10 1.11 1.12 1.13 1.14 1.15 1.16 1.17 1.18 1.19
ARCHITECTS

GENERAL NOTES
COPYRIGHT OF THIS DRG REMAINS WITH HAO ARCHITECTS AND MAY NOT BE
REPRODUCED WITHOUT PRIOR WRITTEN CONSENT.
DO NOT SCALE DRGS. DIMENSIONS ON THE DRGS GOVERN
ALL DIMENSIONS ARE IN MILLIMETRES UNLESS NOTED OTHERWISE.
ALL DIMENSIONS SHALL BE CHECKED / VERIFIED ON SITE BEFORE PROCEEDING
WITH THE WORK.
ANY AREAS INDICATED ON THIS SHEET ARE APPROXIMATE AND INDICATIVE ONLY
CONTRACTOR SHALL NOTIFY IN WRITING OF ANY DISCREPANCIES 60 DAYS
BEFORE COMMENCEMENT OF WORK
ALL PROPOSED WORKS TO BE CARRIED OUT IN ACCORDANCE WITH HAO
ARCHITECTS DESIGN DRAWINGS, TECHNICAL SPECIFICATIONS AND SCHEDULES
FOR ARCHITECTURAL WORKS.
ALL SPECIALIST CONSULTANTS AS LISTED BELOW SHOULD CO-ORDINATE THEIR
46150 DESIGNS IN ACCORDANCE WITH HAO ARCHITECTS DESIGN DRAWINGS.
- STRUCTURAL DESIGN.
11250 34900 - LIFE AND SAFETY
- MEP SERVICES.
READ THIS DRAWING IN CONJUNCTION WITH ALL OTHER CONSULTANT'S AND
350 2200 3700 5800 3700 3700 3700 3700 1850 1850 3700 3700 3700 3700 3700 3700 2200 350 SPECIALIST'S DRAWINGS, DETAILS, SCHEDULES AND SPECIFICATIONS
FIT OUT CONTRACTOR MUST PREPARE FULL SHOP DRAWINGS AND MATERIALS
SUBMITTALS WITH SPECIFIC REFERENCE TO SITE CONDITIONS FOR H-AO
1 1 APPROVAL PRIOR TO MANUFACTURE INSTALLATION AND SHOULD BE CO-
ORDINATED WITH ALL CONSULTANTS INVOLVED.
A-T1-301 A-T1-303 ALL CONSULTANTS, SPECIALISTS, SUPPLIERS, MANUFACTURERS, ETC. MUST
A-T1-203 REFER TO GENERAL LAYOUT PLANS FOR ACTUAL LOCATIONS OF APARTMENTS.
FIGURED DIMENSIONS ARE TO BE USED IN PREFERENCE TO SCALES. ALL
DIMENSIONS MUST BE CHECKED AGAINST SITE SIZES BEFORE COMMENCING
WORK.
3 DRAWING CONVEY THE DESIGN INTENT. CONTRACTOR TO PREPARE COORDINATED
SHOP DRAWINGS OF ALL DISCIPLINES BEFORE CONSTRUCTION ON SITE.
FIT OUT CONTRACTOR MUST APPLY FIRE RETARDANT LACQUER TO ALL
MILLWORKS AND VENEERED PANELS WITH A PRODUCT WHICH IS COMPLIANT TO
ALL CIVIL DEFENSE REQUIREMENTS FOR SURFACE SPREAD OF FLAME.
CONTRACTOR MUST SUBMIT APPROVED CERTIFICATES ON COMPLETION OF THE
W02 W03 W03 W02 W03 W02 WORKS ON SITE.
1.A BALCONY BALCONY BALCONY
1.A
1550
1550

1550
1550
3.25M X 1.30M 3.25M X 1.30M 3.25M X 1.30M
KEY PLAN
W03 W04 W02 W01 W01 W01
1.B 1.B

BALCONY BATH-01 BEDROOM-01

1.80M X 2.25M 1.60M X 2.30M 3.75M X 3.40M

LIVING AND DINING LIVING AND DINING LIVING AND DINING

3.60M X 5.70M 3.60M X 5.70M 3.60M X 5.70M
BEDROOM-01 BEDROOM-01 BEDROOM-01
6250

6250
3.40M X 4.10M 3.40M X 4.10M
LIVING AND DINING 3.40M X 4.10M
3.40M X 5.85M
LIVING AND DINING LIVING AND DINING
LIVING AND DINING 3.40M X 5.85M 3.40M X 5.85M
3.60M X 6.00M PASSAGE
1.60M X 2.1M
STUDY ROOM
3.75M X 2.30M
BATH-01 BATH-01 BATH-01
2.30M X 1.60M 2.30M X 1.60M 2.30M X 1.60M

LAUNDRY KITCHEN
11800

W/M DR
KITCHEN KITCHEN 3.40M X 2.10M
DW

KITCHEN KITCHEN DW

KITCHEN
1.65M X 1.20M 3.40M X 2.1M
2.10M X 2.70M 2.10M X 2.70M 3.40M X 2.1M 2.10M X 2.70M
DW

1.C D/W D/W D/W

1.C
3050

3050
KITCHEN VESTIBULE BATH VESTIBULE VESTIBULE BATH
S.E. - 1600 x 2400 VESTIBULE STORAGE/UTILITY STORAGE/UTILITY VESTIBULE STUDY ROOM VESTIBULE BATH 2.10M X 2.20M STORAGE/UTILITY VESTIBULE
2.10M X 2.70M 1.20M WIDE ELECTRICAL RM 1.20M WIDE 2.10M X 1.80M 2.10M X 1.80M 1.20M WIDE 1.20M WIDE 1.20M WIDE 2.10M X 2.20M MECHANICAL SHAFT
3.40M X 2.85M 1.20M WIDE 2.20M X 2.10M 2.10M X 1.80M 1.20M WIDE
1.D DW
P.E. - 1600 x 1550 P.E. - 1600 x 1550 5 m²
LAUNDRY LAUNDRY LAUNDRY
5 m² P.E. - 1600 x 1550 P.E. - 1600 x 1550
1.D
0.70MW/M
X 0.80M 0.70MW/MX 0.80M 0.70MW/M
X 0.80M
900

900 900
M01 M02 M03 M04 M05 M06 M07
23500

20400
23500
1
A-T1-304 1.E A-T1-204 4 SERVICE AREA
LOBBY
80 m² 1.E
2 A-T1-202
900

20 m²

1.F 1.F

STAIRCASE 2
STAIRCASE 1

GARBAGE RM
3050

3050
13 m²
4 m²
13 m²

S.P.D. S.P.D.
1 2 m² 3 m²
A-T1-302

1.G 1.G
8600
6250

6250
RETAIL01 RETAIL02 RETAIL05 RETAIL05 RETAIL05 RETAIL05 RETAIL05 RETAIL05

R0 06/12/2019 FOR APPROVAL CLIENT

NO. DATE DESCRIPTION ISSUED TO

NOT FOR CONSTRUCTION

1.H 1.H
1550
1550

1550
1550
MAIN CONSULTANT / ARCHITECT / INTERIOR DESIGNER
STRUCURAL DESIGNER / MEP DESIGNER

1.J 1.J HAO ARCHITECTURAL & ENGINEERING CONSULTANCY

P.O. Box 25646, Dubai United Arab Emirates
T +9714-358 6660
F +9714-358 6663
E [email protected]

CLIENT
1 MR. PESHRAW AGHA
A-T1-201
PROJECT

350 2200 3700 5800 3700 3700 3700 3700 1850 1850 3700 3700 3700 3700 3700 3700 2200 350 EMPIRE SQUARE
2050 54550 PARCEL 5
EMPIRE WORLD
56950 BLOCK 1
DRAWING TITLE

GA PLANS
TYPICAL FLOOR PLAN - 01M
1.1 1.2 1.3 1.4 1.5 1.6 1.7 1.8 1.9 1.10 1.11 1.12 1.13 1.14 1.15 1.16 1.17 1.18 1.19 LEVEL MEZZANINE
RESIDENTIAL FLOOR PLAN
SCALE DATE ISSUED BY

1 : 100 06/12/2019 MR
PROJECT NO. DRAWING NUMBER REVISION

H201504 A-T1-101 R0
ISSUED FOR

APPROVAL
ARCHITECTURE

SCHEMATIC DESIGN STAGE

© HAO 2019 PRINTED - 12/5/2019 8:27:07 PM
 1.1 1.2 1.3 1.4 1.5 1.6 1.7 1.8 1.9 1.10 1.11 1.12 1.13 1.14 1.15 1.16 1.17 1.18 1.19
ARCHITECTS

GENERAL NOTES
COPYRIGHT OF THIS DRG REMAINS WITH HAO ARCHITECTS AND MAY NOT BE
REPRODUCED WITHOUT PRIOR WRITTEN CONSENT.
DO NOT SCALE DRGS. DIMENSIONS ON THE DRGS GOVERN
ALL DIMENSIONS ARE IN MILLIMETRES UNLESS NOTED OTHERWISE.
ALL DIMENSIONS SHALL BE CHECKED / VERIFIED ON SITE BEFORE PROCEEDING
WITH THE WORK.
ANY AREAS INDICATED ON THIS SHEET ARE APPROXIMATE AND INDICATIVE ONLY
CONTRACTOR SHALL NOTIFY IN WRITING OF ANY DISCREPANCIES 60 DAYS
BEFORE COMMENCEMENT OF WORK
ALL PROPOSED WORKS TO BE CARRIED OUT IN ACCORDANCE WITH HAO
ARCHITECTS DESIGN DRAWINGS, TECHNICAL SPECIFICATIONS AND SCHEDULES
FOR ARCHITECTURAL WORKS.
55300 ALL SPECIALIST CONSULTANTS AS LISTED BELOW SHOULD CO-ORDINATE THEIR
DESIGNS IN ACCORDANCE WITH HAO ARCHITECTS DESIGN DRAWINGS.
- STRUCTURAL DESIGN.
11250 44050 - LIFE AND SAFETY
- MEP SERVICES.
READ THIS DRAWING IN CONJUNCTION WITH ALL OTHER CONSULTANT'S AND
350 2200 3700 5800 3700 3700 3700 3700 1850 1850 3700 3700 3700 3700 3700 3700 2200 350 SPECIALIST'S DRAWINGS, DETAILS, SCHEDULES AND SPECIFICATIONS
FIT OUT CONTRACTOR MUST PREPARE FULL SHOP DRAWINGS AND MATERIALS
SUBMITTALS WITH SPECIFIC REFERENCE TO SITE CONDITIONS FOR H-AO
APPROVAL PRIOR TO MANUFACTURE INSTALLATION AND SHOULD BE CO-
ORDINATED WITH ALL CONSULTANTS INVOLVED.
ALL CONSULTANTS, SPECIALISTS, SUPPLIERS, MANUFACTURERS, ETC. MUST
1 1 A-T1-203 REFER TO GENERAL LAYOUT PLANS FOR ACTUAL LOCATIONS OF APARTMENTS.

A-T1-301 A-T1-303 FIGURED DIMENSIONS ARE TO BE USED IN PREFERENCE TO SCALES. ALL

DIMENSIONS MUST BE CHECKED AGAINST SITE SIZES BEFORE COMMENCING
WORK.
3 DRAWING CONVEY THE DESIGN INTENT. CONTRACTOR TO PREPARE COORDINATED
SHOP DRAWINGS OF ALL DISCIPLINES BEFORE CONSTRUCTION ON SITE.
FIT OUT CONTRACTOR MUST APPLY FIRE RETARDANT LACQUER TO ALL
MILLWORKS AND VENEERED PANELS WITH A PRODUCT WHICH IS COMPLIANT TO
ALL CIVIL DEFENSE REQUIREMENTS FOR SURFACE SPREAD OF FLAME.
CONTRACTOR MUST SUBMIT APPROVED CERTIFICATES ON COMPLETION OF THE
W03 W02 W02 W03 W02 W03 W02 WORKS ON SITE.
1.A 1.A
1550
1550

1550
BALCONY BALCONY BALCONY

2000
3.25M X 1.30M 3.25M X 1.30M 3.25M X 1.30M KEY PLAN
W02 W04 W03 W01 W01 W01 W01
1.B BALCONY
1.B
3.25M X 1.30M
2000

BALCONY BATH-01 BEDROOM-01

1.80M X 2.25M 1.60M X 2.30M 3.75M X 3.40M
LIVING AND DINING
LIVING AND DINING LIVING AND DINING LIVING AND DINING 3.60M X 5.70M
3.60M X 5.70M 3.60M X 5.70M 3.60M X 5.70M
BEDROOM-01 BEDROOM-01 LIVING AND DINING BEDROOM-01 BEDROOM-01
6250

6250
3.40M X 4.10M 3.40M X 4.10M 3.40M X 5.85M 3.40M X 4.10M 3.40M X 4.10M

LIVING AND DINING LIVING AND DINING LIVING AND DINING

3.60M X 6.00M PASSAGE 3.40M X 5.85M 3.40M X 5.85M
1.60M X 2.1M
STUDY ROOM
L1 3.75M X 2.30M 2 L1
1 BATH-01 BATH-01 BATH-01 A-T1-705
BATH-01
A-T1-705 2.30M X 1.60M 2.30M X 1.60M 2.30M X 1.60M 2.30M X 1.60M

LAUNDRY KITCHEN KITCHEN KITCHEN KITCHEN

KITCHEN KITCHEN KITCHEN
DW DW
W/M DR
1.65M X 1.20M
2.10M X 2.70M 2.10M X 2.70M 3.40M X 2.10M 3.40M X 2.1M 3.40M X 2.1M 2.10M X 2.70M 2.10M X 2.70M
DW

1.C D/W D/W

VESTIBULE
D/W W/D

1.C
VESTIBULE VESTIBULE VESTIBULE
1.20M WIDE 1.20M WIDE
1.20M WIDE 1.20M WIDE
3050

3050
KITCHEN VESTIBULE STORAGE/UTILITY STORAGE/UTILITY STUDY ROOM VESTIBULE BATH BATH VESTIBULE VESTIBULE BATH
2.10M X 2.70M 1.20M WIDE S.E. - 1600 x 2400 ELECTRICAL RM 3.40M X 2.85M 1.20M WIDE 2.10M X 2.20M 1.20M WIDE 1.20M WIDE 2.10M X 2.20M
STORAGE/UTILITY STORAGE/UTILITY
5 m² 2.10M X 1.80M 2.10M X 1.80M 2.20M X 2.10M 2.10M X 1.80M MECHANICAL SHAFT 2.10M X 1.80M
P.E. - 1600 x 1550 P.E. - 1600 x 1550 P.E. - 1600 x 1550 P.E. - 1600 x 1550
1.D 1.D
DW
5 m²
L2 LAUNDRY LAUNDRY LAUNDRY L2
0.70MW/M
X 0.80M 0.70M W/M
X 0.80M 0.70MW/M
X 0.80M
900

900 900
101 102 103 104 105 106 107 108
23500
16400

19500
23500
1
LOBBY
A-T1-304 1.E A-T1-204 4 SERVICE AREA
31 m² 1.8M WIDE
SERVICE AREA
36 m² 1.E
2 A-T1-202
900

116 115 114 113 112 111 110 109

LAUNDRY LAUNDRY LAUNDRY

W/M W/M
W/M

1.F L1
0.70M X 0.80M 0.70M X 0.80M 0.70M X 0.80M
L1 1.F
STAIRCASE 1

STAIRCASE 2
DW

BATH BATH BATH

3050

3050
KITCHEN VESTIBULE GARBAGE RM
STORAGE/UTILITY STORAGE/UTILITY STUDY ROOM VESTIBULE VESTIBULE VESTIBULE STORAGE/UTILITY STORAGE/UTILITY
13 m²

13 m²
4 m² 2.20M X 2.10M 2.10M X 2.20M 2.10M X 2.20M
2.10M X 2.70M 1.20M WIDE 2.10M X 1.80M 3.40M X 2.85M 1.20M WIDE 1.20M WIDE 1.20M WIDE 2.10M X 1.80M 2.10M X 1.80M
S.P.D. 2.10M X 1.80M S.P.D.
1 2 m² 3 m²
VESTIBULE VESTIBULE
A-T1-302 UP VESTIBULE VESTIBULE 1.20M WIDE 1.20M WIDE
1.20M WIDE 1.20M WIDE

1.G LAUNDRY
KITCHEN
D/W D/W

KITCHEN
2.10M X 2.70M
DW
KITCHEN KITCHEN
D/W

KITCHEN KITCHEN
D/W

1.G
2.10M X 2.70M 2.10M X 2.70M 2.10M X 2.70M
KITCHEN 3.40M X 2.1M 3.40M X 2.1M
W/M DR

1.65M X 1.20M DW DW

3.40M X 2.10M
BATH-01 BATH-01 BATH-01 BATH-01
STUDY ROOM 2.30M X 1.60M 2.30M X 1.60M 2.30M X 1.60M 2.30M X 1.60M
L2 3.75M X 2.30M
L2
PASSAGE
LIVING AND DINING 1.60M X 2.1M LIVING AND DINING LIVING AND DINING
3.60M X 6.00M 3.40M X 5.85M 3.40M X 5.85M
6250

6250
LIVING AND DINING BEDROOM-01 BEDROOM-01
BEDROOM-01 BEDROOM-01 3.40M X 5.85M 3.40M X 4.10M
3.40M X 4.10M 3.40M X 4.10M 3.40M X 4.10M
LIVING AND DINING LIVING AND DINING LIVING AND DINING
3.60M X 5.70M 3.60M X 5.70M
3.60M X 5.70M LIVING AND DINING
3.60M X 5.70M
BALCONY BATH-01 BEDROOM-01
1.80M X 2.25M 1.60M X 2.30M 3.75M X 3.40M R0 06/12/2019 FOR APPROVAL CLIENT
NO. DATE DESCRIPTION ISSUED TO
2000

BALCONY NOT FOR CONSTRUCTION

3.25M X 1.30M
1.H W02 W04 W03 W01 W01 W01 W01 1.H

2000
1550
1550

1550
BALCONY BALCONY BALCONY MAIN CONSULTANT / ARCHITECT / INTERIOR DESIGNER
3.25M X 1.30M 3.25M X 1.30M 3.25M X 1.30M STRUCURAL DESIGNER / MEP DESIGNER

1.J W03 W02 W02 W03 W02 W03 W02 1.J HAO ARCHITECTURAL & ENGINEERING CONSULTANCY
P.O. Box 25646, Dubai United Arab Emirates
T +9714-358 6660
F +9714-358 6663
E [email protected]

CLIENT
1 MR. PESHRAW AGHA
A-T1-201
PROJECT

350 2200 3700 5800 3700 3700 3700 3700 1850 1850 3700 3700 3700 3700 3700 3700 2200 350 EMPIRE SQUARE
11250 44050 PARCEL 5
EMPIRE WORLD
55300 BLOCK 1
DRAWING TITLE

GA PLANS
TYPICAL FLOOR PLAN - 01A
1.1 1.2 1.3 1.4 1.5 1.6 1.7 1.8 1.9 1.10 1.11 1.12 1.13 1.14 1.15 1.16 1.17 1.18 1.19 LEVEL 1
RESIDENTIAL FLOOR PLAN
SCALE DATE ISSUED BY

1 : 100 06/12/2019 MR
PROJECT NO. DRAWING NUMBER REVISION

H201504 A-T1-110 R0
ISSUED FOR

APPROVAL
ARCHITECTURE

SCHEMATIC DESIGN STAGE

© HAO 2019 PRINTED - 12/5/2019 8:27:11 PM
 1.1 1.2 1.3 1.4 1.5 1.6 1.7 1.8 1.9 1.10 1.11 1.12 1.13 1.14 1.15 1.16 1.17 1.18 1.19
ARCHITECTS

GENERAL NOTES
COPYRIGHT OF THIS DRG REMAINS WITH HAO ARCHITECTS AND MAY NOT BE
REPRODUCED WITHOUT PRIOR WRITTEN CONSENT.
DO NOT SCALE DRGS. DIMENSIONS ON THE DRGS GOVERN
ALL DIMENSIONS ARE IN MILLIMETRES UNLESS NOTED OTHERWISE.
ALL DIMENSIONS SHALL BE CHECKED / VERIFIED ON SITE BEFORE PROCEEDING
WITH THE WORK.
ANY AREAS INDICATED ON THIS SHEET ARE APPROXIMATE AND INDICATIVE ONLY
CONTRACTOR SHALL NOTIFY IN WRITING OF ANY DISCREPANCIES 60 DAYS
BEFORE COMMENCEMENT OF WORK
ALL PROPOSED WORKS TO BE CARRIED OUT IN ACCORDANCE WITH HAO
ARCHITECTS DESIGN DRAWINGS, TECHNICAL SPECIFICATIONS AND SCHEDULES
FOR ARCHITECTURAL WORKS.
55300 ALL SPECIALIST CONSULTANTS AS LISTED BELOW SHOULD CO-ORDINATE THEIR
DESIGNS IN ACCORDANCE WITH HAO ARCHITECTS DESIGN DRAWINGS.
- STRUCTURAL DESIGN.
11250 44050 - LIFE AND SAFETY
- MEP SERVICES.
READ THIS DRAWING IN CONJUNCTION WITH ALL OTHER CONSULTANT'S AND
350 2200 3700 5800 3700 3700 3700 3700 1850 1850 3700 3700 3700 3700 3700 3700 2200 350 SPECIALIST'S DRAWINGS, DETAILS, SCHEDULES AND SPECIFICATIONS
FIT OUT CONTRACTOR MUST PREPARE FULL SHOP DRAWINGS AND MATERIALS
SUBMITTALS WITH SPECIFIC REFERENCE TO SITE CONDITIONS FOR H-AO
1 1 APPROVAL PRIOR TO MANUFACTURE INSTALLATION AND SHOULD BE CO-
ORDINATED WITH ALL CONSULTANTS INVOLVED.
A-T1-301 A-T1-303 ALL CONSULTANTS, SPECIALISTS, SUPPLIERS, MANUFACTURERS, ETC. MUST
A-T1-203 REFER TO GENERAL LAYOUT PLANS FOR ACTUAL LOCATIONS OF APARTMENTS.
FIGURED DIMENSIONS ARE TO BE USED IN PREFERENCE TO SCALES. ALL
DIMENSIONS MUST BE CHECKED AGAINST SITE SIZES BEFORE COMMENCING
WORK.
3 DRAWING CONVEY THE DESIGN INTENT. CONTRACTOR TO PREPARE COORDINATED
SHOP DRAWINGS OF ALL DISCIPLINES BEFORE CONSTRUCTION ON SITE.
FIT OUT CONTRACTOR MUST APPLY FIRE RETARDANT LACQUER TO ALL
MILLWORKS AND VENEERED PANELS WITH A PRODUCT WHICH IS COMPLIANT TO
ALL CIVIL DEFENSE REQUIREMENTS FOR SURFACE SPREAD OF FLAME.
CONTRACTOR MUST SUBMIT APPROVED CERTIFICATES ON COMPLETION OF THE
W02 W03 W03 W02 W03 W02 W03 WORKS ON SITE.
1.A 1.A
1550
1550

1550
BALCONY BALCONY BALCONY

2000
3.25M X 1.30M 3.25M X 1.30M 3.25M X 1.30M KEY PLAN
W03 W04 W02 W01 W01 W01 W01
1.B BALCONY
1.B
3.25M X 1.30M
2000

BATH-01 BEDROOM-01
BALCONY 1.60M X 2.30M 3.75M X 3.40M
1.80M X 2.25M
LIVING AND DINING
LIVING AND DINING LIVING AND DINING LIVING AND DINING 3.60M X 5.70M
3.60M X 5.70M 3.60M X 5.70M 3.60M X 5.70M
BEDROOM-01 BEDROOM-01 LIVING AND DINING BEDROOM-01 BEDROOM-01
6250

6250
3.40M X 4.10M 3.40M X 4.10M 3.40M X 5.85M 3.40M X 4.10M 3.40M X 4.10M

LIVING AND DINING LIVING AND DINING LIVING AND DINING

3.60M X 6.00M PASSAGE 3.40M X 5.85M 3.40M X 5.85M
1.60M X 2.1M
STUDY ROOM
L1 3.75M X 2.30M L1
BATH-01 BATH-01 BATH-01 BATH-01
2.30M X 1.60M 2.30M X 1.60M 2.30M X 1.60M 2.30M X 1.60M

LAUNDRY KITCHEN KITCHEN KITCHEN

KITCHEN KITCHEN KITCHEN KITCHEN
DW DW
W/M
1.65M X 1.20M
DR
3.40M X 2.10M
3.40M X 2.1M 3.40M X 2.1M
2.10M X 2.70M 2.10M X 2.70M 2.10M X 2.70M 2.10M X 2.70M
DW

1.C D/W D/W D/W W/D

1.C
3050

3050
KITCHEN VESTIBULE STUDY ROOM VESTIBULE BATH VESTIBULE VESTIBULE BATH
S.E. - 1600 x 2400 ELECTRICAL RM VESTIBULE STORAGE/UTILITY STORAGE/UTILITY VESTIBULE 3.40M X 2.85M 1.20M WIDE BATH STORAGE/UTILITY VESTIBULE VESTIBULE STORAGE/UTILITY
2.10M X 2.70M 1.20M WIDE 5 m² 1.20M WIDE 2.10M X 1.80M 2.10M X 1.80M 1.20M WIDE 2.20M X 2.10M 2.10M X 2.20M 1.20M WIDE 1.20M WIDE 2.10M X 2.20M MECHANICAL SHAFT
DW
P.E. - 1600 x 1550 P.E. - 1600 x 1550 2.10M X 1.80M 1.20M WIDE P.E. - 1600 x 1550 P.E. - 1600 x 1550 1.20M WIDE 2.10M X 1.80M
5 m²
L1 LAUNDRY LAUNDRY LAUNDRY L1
1.D 0.70MW/M
X 0.80M 0.70M W/M
X 0.80M 0.70MW/M
X 0.80M 1.D
900

900 900
201 202 203 204 205 206 207 208
23500
16400

19500
23500
1
LOBBY
A-T1-304 1.E A-T1-204 4 SERVICE AREA 1.8M WIDE SERVICE AREA 1.E
2 A-T1-202
900

31 m² 36 m²
216 215 214 213 212 211 210 209

LAUNDRY LAUNDRY LAUNDRY

W/M W/M

1.F
W/M

0.70M X 0.80M 0.70M X 0.80M 0.70M X 0.80M

1.F L1 L1
STAIRCASE 1

STAIRCASE 2
DW
GARBAGE RM
BATH BATH BATH
3050

3050
KITCHEN VESTIBULE VESTIBULE STORAGE/UTILITY STORAGE/UTILITY VESTIBULE STUDY ROOM VESTIBULE VESTIBULE VESTIBULE STORAGE/UTILITY VESTIBULE VESTIBULE STORAGE/UTILITY
13 m²

4 m²

13 m²
2.10M X 2.70M 1.20M WIDE 3.40M X 2.85M 1.20M WIDE 2.20M X 2.10M 2.10M X 2.20M 1.20M WIDE 1.20M WIDE 2.10M X 2.20M 1.20M WIDE 2.10M X 1.80M
S.P.D. 1.20M WIDE 2.10M X 1.80M 2.10M X 1.80M 1.20M WIDE 2.10M X 1.80M 1.20M WIDE
S.P.D.
1 2 m² 3 m²
A-T1-302 UP

1.G LAUNDRY
KITCHEN
D/W D/W

KITCHEN
2.10M X 2.70M
DW
KITCHEN KITCHEN
D/W

KITCHEN KITCHEN
D/W

1.G
2.10M X 2.70M 2.10M X 2.70M 2.10M X 2.70M
KITCHEN 3.40M X 2.1M 3.40M X 2.1M
W/M DR

1.65M X 1.20M DW DW

3.40M X 2.10M BATH-01

BATH-01 BATH-01 BATH-01 2.30M X 1.60M
STUDY ROOM 2.30M X 1.60M 2.30M X 1.60M
L1 2.30M X 1.60M L1
3.75M X 2.30M
PASSAGE
LIVING AND DINING 1.60M X 2.1M
3.60M X 6.00M LIVING AND DINING LIVING AND DINING
3.40M X 5.85M 3.40M X 5.85M
6250

6250
LIVING AND DINING BEDROOM-01 BEDROOM-01
BEDROOM-01 BEDROOM-01 3.40M X 5.85M 3.40M X 4.10M
3.40M X 4.10M 3.40M X 4.10M 3.40M X 4.10M
LIVING AND DINING LIVING AND DINING LIVING AND DINING
3.60M X 5.70M 3.60M X 5.70M
3.60M X 5.70M LIVING AND DINING
3.60M X 5.70M
BALCONY BEDROOM-01
1.80M X 2.25M BATH-01 3.75M X 3.40M R0 06/12/2019 FOR APPROVAL CLIENT
1.60M X 2.30M NO. DATE DESCRIPTION ISSUED TO
2000

W04 BALCONY NOT FOR CONSTRUCTION

3.25M X 1.30M
1.H W03 W04 W02 W01 W01 W01 W01 1.H

2000
1550
1550

BALCONY

1550
BALCONY BALCONY MAIN CONSULTANT / ARCHITECT / INTERIOR DESIGNER
3.25M X 1.30M 3.25M X 1.30M 3.25M X 1.30M STRUCURAL DESIGNER / MEP DESIGNER

1.J W02 W03 W03 W02 W03 W02 W03 1.J HAO ARCHITECTURAL & ENGINEERING CONSULTANCY
P.O. Box 25646, Dubai United Arab Emirates
T +9714-358 6660
F +9714-358 6663
E [email protected]

CLIENT
1 MR. PESHRAW AGHA
A-T1-201
PROJECT

350 2200 3700 5800 3700 3700 3700 3700 1850 1850 3700 3700 3700 3700 3700 3700 2200 350 EMPIRE SQUARE
11250 44050 PARCEL 5
EMPIRE WORLD
55300 BLOCK 1
DRAWING TITLE

GA PLANS
TYPICAL FLOOR PLAN - 01
1.1 1.2 1.3 1.4 1.5 1.6 1.7 1.8 1.9 1.10 1.11 1.12 1.13 1.14 1.15 1.16 1.17 1.18 1.19 LEVEL 2 TO LEVEL 7
RESIDENTIAL FLOOR PLAN
SCALE DATE ISSUED BY

1 : 100 06/12/2019 MR
PROJECT NO. DRAWING NUMBER REVISION

H201504 A-T1-111 R0
ISSUED FOR

APPROVAL
ARCHITECTURE

SCHEMATIC DESIGN STAGE

© HAO 2019 PRINTED - 12/5/2019 8:27:15 PM
 1.1 1.2 1.3 1.4 1.5 1.6 1.7 1.8 1.9 1.10 1.11 1.12 1.13 1.14 1.15 1.16 1.17 1.18 1.19
ARCHITECTS

GENERAL NOTES
COPYRIGHT OF THIS DRG REMAINS WITH HAO ARCHITECTS AND MAY NOT BE
REPRODUCED WITHOUT PRIOR WRITTEN CONSENT.
DO NOT SCALE DRGS. DIMENSIONS ON THE DRGS GOVERN
ALL DIMENSIONS ARE IN MILLIMETRES UNLESS NOTED OTHERWISE.
ALL DIMENSIONS SHALL BE CHECKED / VERIFIED ON SITE BEFORE PROCEEDING
WITH THE WORK.
ANY AREAS INDICATED ON THIS SHEET ARE APPROXIMATE AND INDICATIVE ONLY
CONTRACTOR SHALL NOTIFY IN WRITING OF ANY DISCREPANCIES 60 DAYS
BEFORE COMMENCEMENT OF WORK
ALL PROPOSED WORKS TO BE CARRIED OUT IN ACCORDANCE WITH HAO
ARCHITECTS DESIGN DRAWINGS, TECHNICAL SPECIFICATIONS AND SCHEDULES
FOR ARCHITECTURAL WORKS.
ALL SPECIALIST CONSULTANTS AS LISTED BELOW SHOULD CO-ORDINATE THEIR
55300 DESIGNS IN ACCORDANCE WITH HAO ARCHITECTS DESIGN DRAWINGS.
- STRUCTURAL DESIGN.
14950 40350 - LIFE AND SAFETY
- MEP SERVICES.
READ THIS DRAWING IN CONJUNCTION WITH ALL OTHER CONSULTANT'S AND
350 2200 3700 5800 3700 3700 3700 3700 1850 1850 3700 3700 3700 3700 3700 3700 2200 350 SPECIALIST'S DRAWINGS, DETAILS, SCHEDULES AND SPECIFICATIONS
FIT OUT CONTRACTOR MUST PREPARE FULL SHOP DRAWINGS AND MATERIALS
SUBMITTALS WITH SPECIFIC REFERENCE TO SITE CONDITIONS FOR H-AO
1 1 APPROVAL PRIOR TO MANUFACTURE INSTALLATION AND SHOULD BE CO-
ORDINATED WITH ALL CONSULTANTS INVOLVED.
A-T1-301 A-T1-303 ALL CONSULTANTS, SPECIALISTS, SUPPLIERS, MANUFACTURERS, ETC. MUST
A-T1-203 REFER TO GENERAL LAYOUT PLANS FOR ACTUAL LOCATIONS OF APARTMENTS.
FIGURED DIMENSIONS ARE TO BE USED IN PREFERENCE TO SCALES. ALL
DIMENSIONS MUST BE CHECKED AGAINST SITE SIZES BEFORE COMMENCING
WORK.
3 DRAWING CONVEY THE DESIGN INTENT. CONTRACTOR TO PREPARE COORDINATED
SHOP DRAWINGS OF ALL DISCIPLINES BEFORE CONSTRUCTION ON SITE.
FIT OUT CONTRACTOR MUST APPLY FIRE RETARDANT LACQUER TO ALL
MILLWORKS AND VENEERED PANELS WITH A PRODUCT WHICH IS COMPLIANT TO
ALL CIVIL DEFENSE REQUIREMENTS FOR SURFACE SPREAD OF FLAME.
CONTRACTOR MUST SUBMIT APPROVED CERTIFICATES ON COMPLETION OF THE
W02 W02 W03 W03 W02 W02 W03 WORKS ON SITE.
1.A 1.A
1550
1550

1550
BALCONY BALCONY

2000
3.25M X 1.30M 3.25M X 1.30M
KEY PLAN
W03 W04 W02 W03 W01 W01 W03
1.B BALCONY
1.80M X 2.35M
1.B
BEDROOM-02 BEDROOM-01 BEDROOM-01
2000

3.40M X 3.40M 3.40M X 4.10M 3.40M X 4.10M

BALCONY BATH-01 LIVING AND DINING LIVING AND DINING LIVING AND DINING
1.80M X 2.25M
1.60M X 2.30M BEDROOM-01 3.40M X 5.85M 3.40M X 5.85M 3.40M X 5.85M
BEDROOM-01
3.75M X 3.40M 3.40M X 4.45M

LIVING AND DINING LIVING AND DINING

LIVING AND DINING 3.60M X 6.00M
3.60M X 6.00M
3.60M X 6.00M
6250

6250
BEDROOM-02
3.40M X 3.35M
LIVING AND DINING PASSAGE
1.10M WIDE
3.60M X 6.00M
PASSAGE DRESS
1.70M X 2.40M
1.00M WIDE
DRESS BATH-02
L1 1.70M X 2.45M L1
BATH-01 BATH-01 1.60M X 2.30M
BATH-01 DR

2.30M X 1.60M 2.30M X 1.60M 2.30M X 1.60M LAUNDRY

1.00M X 1.60M
LAUNDRY
DR W/M
STUDY ROOM STORAGE/UTILITY BATH-02 KITCHEN
DW DW
KITCHEN
DW
KITCHEN W/M

1.60M X 1.20M 1.50M X 1.20M 2.20M X 1.20M 1.60M X 2.30M

3.40M X 2.1M 3.40M X 2.1M 3.40M X 2.1M
KITCHEN KITCHEN
1.C 2.10M X 2.70M
DW
2.10M X 2.70M
DW
1.C
STUDY ROOM STUDY ROOM
3.50M X 2.90M 3.50M X 2.90M
3050

3050
KITCHEN VESTIBULE BATH VESTIBULE BATH VESTIBULE VESTIBULE BATH KITCHEN
2.10M X 2.70M S.E. - 1600 x 2400 ELECTRICAL RM VESTIBULE 1.20M WIDE STORAGE / UTILITY 2.10M X 2.20M 1.20M WIDE STORAGE / UTILITY VESTIBULE VESTIBULE 2.10M X 2.70M
1.20M WIDE 5 m² 1.20M WIDE 2.10M X 2.20M 1.20M WIDE 2.10M X 2.20M MECHANICAL SHAFT
P.E. - 1600 x 1550 P.E. - 1600 x 1550 2.10M X 1.50M 2.10M X 1.50M 1.20M WIDE P.E. - 1600 x 1550 P.E. - 1600 x 1550 1.20M WIDE
1.D 1.D
D/W D/W
5 m²
L1 LAUNDRY LAUNDRY LAUNDRY L1
0.70MW/M
X 0.80M W/M DR 0.70M W/M
X 0.80M W/M DR 0.70M W/M
X 0.80M
900

900 900
801 802 803 804 805 806 807
23500
16400

19500
23500
1
LOBBY
A-T1-304 1.E A-T1-204 4 SERVICE AREA
31 m² 1.8M WIDE
SERVICE AREA
36 m² 1.E
2 A-T1-202
900

814 813 812 811 810 809 808

LAUNDRY LAUNDRY LAUNDRY

W/M W/M W/M
W/M DR W/M DR

0.70M X 0.80M 0.70M X 0.80M 0.70M X 0.80M

1.F L1 L1 1.F
STAIRCASE 1

STORAGE / UTILITY STORAGE / UTILITY

STAIRCASE 2
D/W D/W

GARBAGE RM BATH BATH

3050

3050
VESTIBULE VESTIBULE VESTIBULE 2.10M X 1.50M BATH VESTIBULE VESTIBULE 2.10M X 1.50M VESTIBULE VESTIBULE KITCHEN
13 m²

4 m²

13 m²
KITCHEN 1.20M WIDE
S.P.D. 1.20M WIDE
2.10M X 2.20M 1.20M WIDE 2.10M X 2.20M 1.20M WIDE 1.20M WIDE 2.10M X 2.20M
1.20M WIDE 1.20M WIDE 2.10M X 2.70M
2.10M X 2.70M S.P.D.
1 2 m² 3 m²
STUDY ROOM STUDY ROOM
A-T1-302 3.50M X 2.90M 3.50M X 2.90M
DW DW

KITCHEN KITCHEN
1.G KITCHEN
2.10M X 2.70M
KITCHEN
2.10M X 2.70M
KITCHEN
1.G
LAUNDRY
DR W/M
STUDY ROOM STORAGE/UTILITY BATH-02 3.40M X 2.1M DW DW 3.40M X 2.1M DW 3.40M X 2.1M W/M

1.60M X 1.20M 1.50M X 1.20M 2.20M X 1.20M 1.60M X 2.30M

BATH-01 BATH-01 BATH-01 LAUNDRY
2.30M X 1.60M 2.30M X 1.60M 1.00M X 1.60M
2.30M X 1.60M DRESS BATH-02 DR

L1 1.70M X 2.45M 1.60M X 2.30M L1

PASSAGE DRESS
LIVING AND DINING 1.00M WIDE
1.70M X 2.40M PASSAGE
3.60M X 6.00M 1.10M WIDE
6250

6250
BEDROOM-02
LIVING AND DINING LIVING AND DINING 3.40M X 3.35M
3.60M X 6.00M
3.60M X 6.00M
LIVING AND DINING
3.60M X 6.00M
BEDROOM-01
BALCONY BEDROOM-01 3.40M X 4.45M
1.80M X 2.25M BATH-01 3.75M X 3.40M
LIVING AND DINING LIVING AND DINING LIVING AND DINING R0 06/12/2019 FOR APPROVAL CLIENT
3.40M X 5.85M 3.40M X 5.85M 3.40M X 5.85M NO. DATE DESCRIPTION ISSUED TO
2000

1.60M X 2.30M
BEDROOM-01 BEDROOM-01
BEDROOM-02 3.40M X 4.10M 3.40M X 4.10M
3.40M X 3.40M
BALCONY NOT FOR CONSTRUCTION
1.80M X 2.35M
1.H W03 W04 W02 W03 W01 W01 W03 1.H

2000
1550
1550

1550
BALCONY BALCONY MAIN CONSULTANT / ARCHITECT / INTERIOR DESIGNER
3.25M X 1.30M 3.25M X 1.30M STRUCURAL DESIGNER / MEP DESIGNER

1.J W02 W02 W03 W03 W02 W02 W03 1.J HAO ARCHITECTURAL & ENGINEERING CONSULTANCY
P.O. Box 25646, Dubai United Arab Emirates
T +9714-358 6660
F +9714-358 6663
E [email protected]

CLIENT
1 MR. PESHRAW AGHA
A-T1-201
PROJECT
350 2200 3700 5800 3700 3700 3700 3700 1850 1850 3700 3700 3700 3700 3700 3700 2200 350
EMPIRE SQUARE
14950 40350 PARCEL 5
55300 EMPIRE WORLD
BLOCK 1
DRAWING TITLE

GA PLANS
TYPICAL FLOOR PLAN - 02
1.1 1.2 1.3 1.4 1.5 1.6 1.7 1.8 1.9 1.10 1.11 1.12 1.13 1.14 1.15 1.16 1.17 1.18 1.19 LEVEL 8
RESIDENTIAL FLOOR PLAN
SCALE DATE ISSUED BY

1 : 100 06/12/2019 MR
PROJECT NO. DRAWING NUMBER REVISION

H201504 A-T1-112 R0
ISSUED FOR

APPROVAL
ARCHITECTURE

SCHEMATIC DESIGN STAGE

© HAO 2019 PRINTED - 12/5/2019 8:27:18 PM
 1.1 1.2 1.3 1.4 1.5 1.6 1.7 1.8 1.9 1.10 1.11 1.12 1.13 1.14 1.15 1.16 1.17 1.18 1.19
ARCHITECTS

GENERAL NOTES
COPYRIGHT OF THIS DRG REMAINS WITH HAO ARCHITECTS AND MAY NOT BE
REPRODUCED WITHOUT PRIOR WRITTEN CONSENT.
DO NOT SCALE DRGS. DIMENSIONS ON THE DRGS GOVERN
ALL DIMENSIONS ARE IN MILLIMETRES UNLESS NOTED OTHERWISE.
ALL DIMENSIONS SHALL BE CHECKED / VERIFIED ON SITE BEFORE PROCEEDING
WITH THE WORK.
ANY AREAS INDICATED ON THIS SHEET ARE APPROXIMATE AND INDICATIVE ONLY
CONTRACTOR SHALL NOTIFY IN WRITING OF ANY DISCREPANCIES 60 DAYS
BEFORE COMMENCEMENT OF WORK
ALL PROPOSED WORKS TO BE CARRIED OUT IN ACCORDANCE WITH HAO
ARCHITECTS DESIGN DRAWINGS, TECHNICAL SPECIFICATIONS AND SCHEDULES
FOR ARCHITECTURAL WORKS.
55300 ALL SPECIALIST CONSULTANTS AS LISTED BELOW SHOULD CO-ORDINATE THEIR
DESIGNS IN ACCORDANCE WITH HAO ARCHITECTS DESIGN DRAWINGS.
- STRUCTURAL DESIGN.
14950 40350 - LIFE AND SAFETY
- MEP SERVICES.
READ THIS DRAWING IN CONJUNCTION WITH ALL OTHER CONSULTANT'S AND
350 2200 3700 5800 3700 3700 3700 3700 1850 1850 3700 3700 3700 3700 3700 3700 2200 350 SPECIALIST'S DRAWINGS, DETAILS, SCHEDULES AND SPECIFICATIONS
FIT OUT CONTRACTOR MUST PREPARE FULL SHOP DRAWINGS AND MATERIALS
SUBMITTALS WITH SPECIFIC REFERENCE TO SITE CONDITIONS FOR H-AO
1 1 APPROVAL PRIOR TO MANUFACTURE INSTALLATION AND SHOULD BE CO-
ORDINATED WITH ALL CONSULTANTS INVOLVED.
A-T1-301 A-T1-303 ALL CONSULTANTS, SPECIALISTS, SUPPLIERS, MANUFACTURERS, ETC. MUST
A-T1-203 REFER TO GENERAL LAYOUT PLANS FOR ACTUAL LOCATIONS OF APARTMENTS.
FIGURED DIMENSIONS ARE TO BE USED IN PREFERENCE TO SCALES. ALL
DIMENSIONS MUST BE CHECKED AGAINST SITE SIZES BEFORE COMMENCING
WORK.
3 DRAWING CONVEY THE DESIGN INTENT. CONTRACTOR TO PREPARE COORDINATED
SHOP DRAWINGS OF ALL DISCIPLINES BEFORE CONSTRUCTION ON SITE.
FIT OUT CONTRACTOR MUST APPLY FIRE RETARDANT LACQUER TO ALL
MILLWORKS AND VENEERED PANELS WITH A PRODUCT WHICH IS COMPLIANT TO
ALL CIVIL DEFENSE REQUIREMENTS FOR SURFACE SPREAD OF FLAME.
CONTRACTOR MUST SUBMIT APPROVED CERTIFICATES ON COMPLETION OF THE
W03 W03 W02 W02 W03 W03 W02 WORKS ON SITE.
1.A BALCONY BALCONY
1.A
1550
1550

1550
3.25M X 1.30M 3.25M X 1.30M

2000
KEY PLAN
W02 W04 W03 W02 W01 W01 W02
1.B BALCONY
1.80M X 2.35M
1.B
2000

BEDROOM-01 LIVING AND DINING

BALCONY BATH-01 3.75M X 3.40M 3.40M X 5.85M BEDROOM-01
1.60M X 2.30M 3.40M X 4.45M
1.80M X 2.25M
LIVING AND DINING LIVING AND DINING
3.60M X 5.70M 3.60M X 5.70M
BEDROOM-01 BEDROOM-01 BEDROOM-02 LIVING AND DINING
6250

6250
BEDROOM-02 LIVING AND DINING 3.40M X 4.10M LIVING AND DINING 3.40M X 4.10M 3.40M X 3.35M 3.60M X 6.00M
3.40M X 3.40M 3.40M X 5.85M 3.40M X 5.85M
PASSAGE
LIVING AND DINING 1.10M WIDE
3.60M X 6.00M PASSAGE
1.00M WIDE DRESS
L1 1.70M X 2.40M BATH-02 BATH-02 L1
1.60M X 2.30M DRESS
BATH-01 BATH-01 1.70M X 2.45M 1.60M X 2.30M BATH-01 DR

LAUNDRY STUDY ROOM STORAGE/UTILITY 2.30M X 1.60M 2.30M X 1.60M 2.30M X 1.60M LAUNDRY
1.60M X 1.20M 1.50M X 1.20M 2.20M X 1.20M KITCHEN KITCHEN 1.00M X 1.60M
DR W/M
3.40M X 2.10M KITCHEN 3.40M X 2.10M KITCHEN DW
KITCHEN W/M

DW
2.10M X 2.70M
DW 2.10M X 2.70M 3.40M X 2.1M

1.C D/W D/W

1.C
3050

3050
KITCHEN VESTIBULE VESTIBULE STUDY ROOM VESTIBULE STORAGE/UTILITY VESTIBULE BATH VESTIBULE KITCHEN
VESTIBULE 2.10M
S.E. - 1600 x 2400
ELECTRICAL RM BATH BATH STUDY ROOM VESTIBULE STORAGE/UTILITY X 2.70M
2.10M X 2.70M 1.20M WIDE 5 m²
2.20M X 2.10M 1.20M WIDE 3.40M X 2.85M 1.20M WIDE 2.20M X 2.10M 1.20M WIDE 3.40M X 2.85M 1.20M WIDE 2.10M X 2.20M 1.20M WIDE MECHANICAL SHAFT 1.20M WIDE
2.10M X 1.80M 2.10M X 1.80M
P.E. - 1600 x 1550 P.E. - 1600 x 1550 P.E. - 1600 x 1550 P.E. - 1600 x 1550
1.D L1
D/W

LAUNDRY LAUNDRY
5 m² D/W

L1
1.D
W/M
0.70M X 0.80M
W/M
0.70M W/M
X 0.80M
900

900 900
901 902 903 904 905 906 907
23500
16400

19500
23500
1
LOBBY
A-T1-304 1.E A-T1-204 4 SERVICE AREA
31 m² 1.8M WIDE SERVICE AREA 1.E
2 A-T1-202
900

914 913 912 911 910 909 908

LAUNDRY LAUNDRY
W/M
W/M W/M

1.F L1
0.70M X 0.80M 0.70M X 0.80M
L1 1.F

STAIRCASE 2
STAIRCASE 1

BATH VESTIBULE BATH VESTIBULE STUDY ROOM VESTIBULE

D/W D/W
GARBAGE RM
VESTIBULE BATH VESTIBULE
3050

3050
KITCHEN VESTIBULE STUDY ROOM
STORAGE/UTILITY VESTIBULE KITCHEN

13 m²
4 m²
13 m²

2.10M X 2.70M 1.20M WIDE 2.20M X 2.10M 1.20M WIDE 3.40M X 2.85M 1.20M WIDE 2.20M X 2.10M 1.20M WIDE 3.40M X 2.85M 1.20M WIDE STORAGE/UTILITY 2.10M X 2.20M 1.20M WIDE
2.10M X 2.70M
S.P.D. 2.10M X 1.80M 2.10M X 1.80M S.P.D. 1.20M WIDE
1 2 m²
3 m²
A-T1-302

1.G KITCHEN
D/W

KITCHEN
D/W

KITCHEN
1.G
KITCHEN
DW DW

DR W/M 2.10M X 2.70M KITCHEN 2.10M X 2.70M 3.40M X 2.1M

LAUNDRY STUDY ROOM STORAGE/UTILITY 3.40M X 2.10M 3.40M X 2.10M
DW

LAUNDRY
W/M

1.60M X 1.20M 1.50M X 1.20M 2.20M X 1.20M BATH-01 BATH-01

BATH-01 1.00M X 1.60M
2.30M X 1.60M 2.30M X 1.60M DRESS BATH-02 2.30M X 1.60M
BATH-02
DR

DRESS 1.70M X 2.45M 1.60M X 2.30M

L1 1.60M X 2.30M L1
PASSAGE 1.70M X 2.40M
LIVING AND DINING 1.00M WIDE
3.60M X 6.00M PASSAGE
1.10M WIDE
BEDROOM-02 LIVING AND DINING
6250

6250
LIVING AND DINING BEDROOM-01 BEDROOM-02 LIVING AND DINING
3.40M X 3.40M
3.40M X 5.85M BEDROOM-01 3.40M X 5.85M
3.40M X 4.10M 3.40M X 4.10M 3.40M X 3.35M 3.60M X 6.00M
LIVING AND DINING LIVING AND DINING
3.60M X 5.70M 3.60M X 5.70M
BALCONY BATH-01 BEDROOM-01
1.80M X 2.25M 1.60M X 2.30M BEDROOM-01 3.40M X 4.45M
3.75M X 3.40M LIVING AND DINING R0 06/12/2019 FOR APPROVAL CLIENT
3.40M X 5.85M NO. DATE DESCRIPTION ISSUED TO
2000

BALCONY NOT FOR CONSTRUCTION

1.80M X 2.35M
1.H W02 W04 W03 W02 W01 W01 W02 1.H

2000
1550
1550

1550
MAIN CONSULTANT / ARCHITECT / INTERIOR DESIGNER
BALCONY BALCONY STRUCURAL DESIGNER / MEP DESIGNER
3.25M X 1.30M 3.25M X 1.30M

1.J W03 W03 W02 W02 W03 W03 W02 1.J HAO ARCHITECTURAL & ENGINEERING CONSULTANCY
P.O. Box 25646, Dubai United Arab Emirates
T +9714-358 6660
F +9714-358 6663
E [email protected]

CLIENT
1 MR. PESHRAW AGHA
A-T1-201
PROJECT
350 2200 3700 5800 3700 3700 3700 3700 1850 1850 3700 3700 3700 3700 3700 3700 2200 350
EMPIRE SQUARE
14950 40350 PARCEL 5
55300 EMPIRE WORLD
BLOCK 1
DRAWING TITLE

GA PLANS
TYPICAL FLOOR PLAN - 03
1.1 1.2 1.3 1.4 1.5 1.6 1.7 1.8 1.9 1.10 1.11 1.12 1.13 1.14 1.15 1.16 1.17 1.18 1.19 LEVEL 9 - LEVEL 16
RESIDENTIAL FLOOR PLAN
SCALE DATE ISSUED BY

1 : 100 06/12/2019 MR
PROJECT NO. DRAWING NUMBER REVISION

H201504 A-T1-113 R0
ISSUED FOR

APPROVAL
ARCHITECTURE

SCHEMATIC DESIGN STAGE

© HAO 2019 PRINTED - 12/5/2019 8:27:22 PM
 1.1 1.2 1.3 1.4 1.5 1.6 1.7 1.8 1.9 1.10 1.11 1.12 1.13 1.14 1.15 1.16 1.17 1.18 1.19
ARCHITECTS

GENERAL NOTES
COPYRIGHT OF THIS DRG REMAINS WITH HAO ARCHITECTS AND MAY NOT BE
REPRODUCED WITHOUT PRIOR WRITTEN CONSENT.
DO NOT SCALE DRGS. DIMENSIONS ON THE DRGS GOVERN
ALL DIMENSIONS ARE IN MILLIMETRES UNLESS NOTED OTHERWISE.
ALL DIMENSIONS SHALL BE CHECKED / VERIFIED ON SITE BEFORE PROCEEDING
WITH THE WORK.
ANY AREAS INDICATED ON THIS SHEET ARE APPROXIMATE AND INDICATIVE ONLY
CONTRACTOR SHALL NOTIFY IN WRITING OF ANY DISCREPANCIES 60 DAYS
BEFORE COMMENCEMENT OF WORK
ALL PROPOSED WORKS TO BE CARRIED OUT IN ACCORDANCE WITH HAO
ARCHITECTS DESIGN DRAWINGS, TECHNICAL SPECIFICATIONS AND SCHEDULES
FOR ARCHITECTURAL WORKS.
ALL SPECIALIST CONSULTANTS AS LISTED BELOW SHOULD CO-ORDINATE THEIR
55300 DESIGNS IN ACCORDANCE WITH HAO ARCHITECTS DESIGN DRAWINGS.
- STRUCTURAL DESIGN.
- LIFE AND SAFETY
6100 13500 18200 11400 6100 - MEP SERVICES.
READ THIS DRAWING IN CONJUNCTION WITH ALL OTHER CONSULTANT'S AND
350 2200 3700 5800 3700 3700 3700 3700 1850 1850 3700 3700 3700 3700 3700 3700 2200 350 SPECIALIST'S DRAWINGS, DETAILS, SCHEDULES AND SPECIFICATIONS
FIT OUT CONTRACTOR MUST PREPARE FULL SHOP DRAWINGS AND MATERIALS
SUBMITTALS WITH SPECIFIC REFERENCE TO SITE CONDITIONS FOR H-AO
1 APPROVAL PRIOR TO MANUFACTURE INSTALLATION AND SHOULD BE CO-
ORDINATED WITH ALL CONSULTANTS INVOLVED.
A-T1-301 1 ALL CONSULTANTS, SPECIALISTS, SUPPLIERS, MANUFACTURERS, ETC. MUST
A-T1-203 REFER TO GENERAL LAYOUT PLANS FOR ACTUAL LOCATIONS OF APARTMENTS.
A-T1-303
FIGURED DIMENSIONS ARE TO BE USED IN PREFERENCE TO SCALES. ALL
DIMENSIONS MUST BE CHECKED AGAINST SITE SIZES BEFORE COMMENCING
WORK.
3 DRAWING CONVEY THE DESIGN INTENT. CONTRACTOR TO PREPARE COORDINATED
SHOP DRAWINGS OF ALL DISCIPLINES BEFORE CONSTRUCTION ON SITE.
FIT OUT CONTRACTOR MUST APPLY FIRE RETARDANT LACQUER TO ALL
MILLWORKS AND VENEERED PANELS WITH A PRODUCT WHICH IS COMPLIANT TO
ALL CIVIL DEFENSE REQUIREMENTS FOR SURFACE SPREAD OF FLAME.
CONTRACTOR MUST SUBMIT APPROVED CERTIFICATES ON COMPLETION OF THE
WORKS ON SITE.
1.A 1.A
1550

1550

1550
1550
KEY PLAN

1.B 1.B

6050
6250

6250
1.C 1.C
UP
3050

3050
SERVICES

1.D 1.D
900

900 900
23500
20400

23500
1
A-T1-304 1.E A-T1-204 4 UP LMR ROOM 1.E
2 A-T1-202
900

SERVICES

1.F 1.F
STAIRCASE 1

STAIRCASE 2
3050

3050
SERVICES

14350
SERVICES
1
A-T1-302

1.G 1.G
6250

6250
R0 06/12/2019 FOR APPROVAL CLIENT
NO. DATE DESCRIPTION ISSUED TO

NOT FOR CONSTRUCTION

1.H 1.H
1550

1550

1550
1550
MAIN CONSULTANT / ARCHITECT / INTERIOR DESIGNER
STRUCURAL DESIGNER / MEP DESIGNER

1.J 1.J HAO ARCHITECTURAL & ENGINEERING CONSULTANCY

P.O. Box 25646, Dubai United Arab Emirates
T +9714-358 6660
F +9714-358 6663
E [email protected]

CLIENT
1 MR. PESHRAW AGHA
A-T1-201
PROJECT
350 2200 3700 5800 3700 3700 3700 3700 1850 1850 3700 3700 3700 3700 3700 3700 2200 350
EMPIRE SQUARE
6100 13500 18200 11400 6100
PARCEL 5
55300 EMPIRE WORLD
BLOCK 1
DRAWING TITLE

GA PLANS
TERRACE LEVEL
1.1 1.2 1.3 1.4 1.5 1.6 1.7 1.8 1.9 1.10 1.11 1.12 1.13 1.14 1.15 1.16 1.17 1.18 1.19
RESIDENTIAL FLOOR PLAN
SCALE DATE ISSUED BY

1 : 100 06/12/2019 MR
PROJECT NO. DRAWING NUMBER REVISION

H201504 A-T1-120 R0
ISSUED FOR

APPROVAL
ARCHITECTURE

SCHEMATIC DESIGN STAGE

© HAO 2019 PRINTED - 12/5/2019 3:42:58 PM
 1.1 1.2 1.3 1.4 1.5 1.7 1.8 1.9 1.10 1.11 1.12 1.13 1.14 1.15 1.16 1.17 1.18 1.19
ARCHITECTS

GENERAL NOTES
COPYRIGHT OF THIS DRG REMAINS WITH HAO ARCHITECTS AND MAY NOT BE
REPRODUCED WITHOUT PRIOR WRITTEN CONSENT.
DO NOT SCALE DRGS. DIMENSIONS ON THE DRGS GOVERN
ALL DIMENSIONS ARE IN MILLIMETRES UNLESS NOTED OTHERWISE.
ALL DIMENSIONS SHALL BE CHECKED / VERIFIED ON SITE BEFORE PROCEEDING
WITH THE WORK.
ANY AREAS INDICATED ON THIS SHEET ARE APPROXIMATE AND INDICATIVE ONLY
CONTRACTOR SHALL NOTIFY IN WRITING OF ANY DISCREPANCIES 60 DAYS
BEFORE COMMENCEMENT OF WORK
ALL PROPOSED WORKS TO BE CARRIED OUT IN ACCORDANCE WITH HAO
ARCHITECTS DESIGN DRAWINGS, TECHNICAL SPECIFICATIONS AND SCHEDULES
FOR ARCHITECTURAL WORKS.
ALL SPECIALIST CONSULTANTS AS LISTED BELOW SHOULD CO-ORDINATE THEIR
DESIGNS IN ACCORDANCE WITH HAO ARCHITECTS DESIGN DRAWINGS.
- STRUCTURAL DESIGN.
55300 - LIFE AND SAFETY
- MEP SERVICES.
READ THIS DRAWING IN CONJUNCTION WITH ALL OTHER CONSULTANT'S AND
19450 18350 17500 SPECIALIST'S DRAWINGS, DETAILS, SCHEDULES AND SPECIFICATIONS
FIT OUT CONTRACTOR MUST PREPARE FULL SHOP DRAWINGS AND MATERIALS
SUBMITTALS WITH SPECIFIC REFERENCE TO SITE CONDITIONS FOR H-AO
1 APPROVAL PRIOR TO MANUFACTURE INSTALLATION AND SHOULD BE CO-
ORDINATED WITH ALL CONSULTANTS INVOLVED.
350 2200 3700 5800 A-T1-301 3700 3700 3700 3700
1 1850 1850 3700 3700 3700 3700 3700 3700 2200 350 ALL CONSULTANTS, SPECIALISTS, SUPPLIERS, MANUFACTURERS, ETC. MUST
A-T1-203 REFER TO GENERAL LAYOUT PLANS FOR ACTUAL LOCATIONS OF APARTMENTS.
A-T1-303
FIGURED DIMENSIONS ARE TO BE USED IN PREFERENCE TO SCALES. ALL
DIMENSIONS MUST BE CHECKED AGAINST SITE SIZES BEFORE COMMENCING
WORK.
3 DRAWING CONVEY THE DESIGN INTENT. CONTRACTOR TO PREPARE COORDINATED
SHOP DRAWINGS OF ALL DISCIPLINES BEFORE CONSTRUCTION ON SITE.
FIT OUT CONTRACTOR MUST APPLY FIRE RETARDANT LACQUER TO ALL
MILLWORKS AND VENEERED PANELS WITH A PRODUCT WHICH IS COMPLIANT TO
ALL CIVIL DEFENSE REQUIREMENTS FOR SURFACE SPREAD OF FLAME.
CONTRACTOR MUST SUBMIT APPROVED CERTIFICATES ON COMPLETION OF THE
WORKS ON SITE.
1.A 1.A
1550

1550

1550
1550
KEY PLAN

1.B 1.B
6050

6050
6250

6250
1.C 1.C
3050

3050
1.D 1.D
900

900 900
23500

23500
1
8300

8300
A-T1-304 1.E A-T1-204 4 1.E
2 A-T1-202
900

1.F 1.F
3050

3050
1
A-T1-302

1.G 1.G
6250

6250
6050

6050
R0 06/12/2019 FOR APPROVAL CLIENT
NO. DATE DESCRIPTION ISSUED TO

NOT FOR CONSTRUCTION

1.H 1.H
1550

1550

1550
1550
MAIN CONSULTANT / ARCHITECT / INTERIOR DESIGNER
STRUCURAL DESIGNER / MEP DESIGNER

1.J 1.J HAO ARCHITECTURAL & ENGINEERING CONSULTANCY

P.O. Box 25646, Dubai United Arab Emirates
T +9714-358 6660
F +9714-358 6663
E [email protected]

CLIENT
1 MR. PESHRAW AGHA
A-T1-201
PROJECT
350 2200 3700 5800 3700 3700 3700 3700 1850 1850 3700 3700 3700 3700 3700 3700 2200 350
6100 13500 18200 17500 EMPIRE SQUARE
PARCEL 5
55300
EMPIRE WORLD
BLOCK 1
DRAWING TITLE

GA PLANS
ROOF LEVEL
1.1 1.2 1.3 1.4 1.5 1.6 1.7 1.8 1.9 1.10 1.11 1.12 1.13 1.14 1.15 1.16 1.17 1.18 1.19
RESIDENTIAL FLOOR PLAN
SCALE DATE ISSUED BY

1 : 100 06/12/2019 MR
PROJECT NO. DRAWING NUMBER REVISION

H201504 A-T1-121 R0
ISSUED FOR

APPROVAL
ARCHITECTURE

SCHEMATIC DESIGN STAGE

© HAO 2019 PRINTED - 12/5/2019 3:42:59 PM
 1.1 1.2 1.3 1.4 1.5 1.6 1.7 1.8 1.9 1.10 1.11 1.12 1.13 1.14 1.15 1.16 1.17 1.18 1.19
ARCHITECTS

GENERAL NOTES
COPYRIGHT OF THIS DRG REMAINS WITH HAO ARCHITECTS AND MAY NOT BE
REPRODUCED WITHOUT PRIOR WRITTEN CONSENT.
DO NOT SCALE DRGS. DIMENSIONS ON THE DRGS GOVERN
ALL DIMENSIONS ARE IN MILLIMETRES UNLESS NOTED OTHERWISE.
ALL DIMENSIONS SHALL BE CHECKED / VERIFIED ON SITE BEFORE PROCEEDING
WITH THE WORK.
ANY AREAS INDICATED ON THIS SHEET ARE APPROXIMATE AND INDICATIVE ONLY
CONTRACTOR SHALL NOTIFY IN WRITING OF ANY DISCREPANCIES 60 DAYS
BEFORE COMMENCEMENT OF WORK
ALL PROPOSED WORKS TO BE CARRIED OUT IN ACCORDANCE WITH HAO
ARCHITECTS DESIGN DRAWINGS, TECHNICAL SPECIFICATIONS AND SCHEDULES
FOR ARCHITECTURAL WORKS.
ALL SPECIALIST CONSULTANTS AS LISTED BELOW SHOULD CO-ORDINATE THEIR
55300 DESIGNS IN ACCORDANCE WITH HAO ARCHITECTS DESIGN DRAWINGS.
- STRUCTURAL DESIGN.
- LIFE AND SAFETY
6100 2800 46400 - MEP SERVICES.
READ THIS DRAWING IN CONJUNCTION WITH ALL OTHER CONSULTANT'S AND
SPECIALIST'S DRAWINGS, DETAILS, SCHEDULES AND SPECIFICATIONS
350 2200 3700 5800 3700 3700 3700 3700 1850 1850 3700 3700 3700 3700 3700 3700 2200 350
FIT OUT CONTRACTOR MUST PREPARE FULL SHOP DRAWINGS AND MATERIALS
SUBMITTALS WITH SPECIFIC REFERENCE TO SITE CONDITIONS FOR H-AO
1 APPROVAL PRIOR TO MANUFACTURE INSTALLATION AND SHOULD BE CO-
ORDINATED WITH ALL CONSULTANTS INVOLVED.
A-T1-301 1 ALL CONSULTANTS, SPECIALISTS, SUPPLIERS, MANUFACTURERS, ETC. MUST
A-T1-203 REFER TO GENERAL LAYOUT PLANS FOR ACTUAL LOCATIONS OF APARTMENTS.
A-T1-303
FIGURED DIMENSIONS ARE TO BE USED IN PREFERENCE TO SCALES. ALL
DIMENSIONS MUST BE CHECKED AGAINST SITE SIZES BEFORE COMMENCING
WORK.
3 DRAWING CONVEY THE DESIGN INTENT. CONTRACTOR TO PREPARE COORDINATED
SHOP DRAWINGS OF ALL DISCIPLINES BEFORE CONSTRUCTION ON SITE.
FIT OUT CONTRACTOR MUST APPLY FIRE RETARDANT LACQUER TO ALL
MILLWORKS AND VENEERED PANELS WITH A PRODUCT WHICH IS COMPLIANT TO
ALL CIVIL DEFENSE REQUIREMENTS FOR SURFACE SPREAD OF FLAME.
CONTRACTOR MUST SUBMIT APPROVED CERTIFICATES ON COMPLETION OF THE
WORKS ON SITE.
1.A 1.A
1550

1550
KEY PLAN

1.B 1.B
7600

7600
6250

6250
1.C 1.C
3250

3250
3050

3050
1.D 1.D
900

900 900
23500

23500
1
A-T1-304 1.E A-T1-204 4 1.E
2 A-T1-202
900

1.F 1.F
3050

3050
1
A-T1-302

1.G 1.G
12650

12650
6250

6250
R0 06/12/2019 FOR APPROVAL CLIENT
NO. DATE DESCRIPTION ISSUED TO

NOT FOR CONSTRUCTION

1.H 1.H
1550

1550
MAIN CONSULTANT / ARCHITECT / INTERIOR DESIGNER
STRUCURAL DESIGNER / MEP DESIGNER

1.J 1.J HAO ARCHITECTURAL & ENGINEERING CONSULTANCY

P.O. Box 25646, Dubai United Arab Emirates
T +9714-358 6660
F +9714-358 6663
E [email protected]

CLIENT
1 MR. PESHRAW AGHA
A-T1-201
PROJECT
350 2200 3700 5800 3700 3700 3700 3700 1850 1850 3700 3700 3700 3700 3700 3700 2200 350
EMPIRE SQUARE
6100 2800 46400 PARCEL 5
55300 EMPIRE WORLD
BLOCK 1
DRAWING TITLE

GA PLANS
UPPER ROOF LEVEL
1.1 1.2 1.3 1.4 1.5 1.6 1.7 1.8 1.9 1.10 1.11 1.12 1.13 1.14 1.15 1.16 1.17 1.18 1.19
RESIDENTIAL FLOOR PLAN
SCALE DATE ISSUED BY

1 : 100 06/12/2019 MR
PROJECT NO. DRAWING NUMBER REVISION

H201504 A-T1-122 R0
ISSUED FOR

APPROVAL
ARCHITECTURE

SCHEMATIC DESIGN STAGE

© HAO 2019 PRINTED - 12/5/2019 3:43:00 PM
1.1 1.2 1.3 1.4 1.5 1.6 1.7 1.8 1.9 1.101.11 1.12 1.13 1.14 1.15 1.16 1.17 1.18 1.19

ARCHITECTS

55300 GENERAL NOTES

COPYRIGHT OF THIS DRG REMAINS WITH HAO ARCHITECTS AND MAY NOT BE
REPRODUCED WITHOUT PRIOR WRITTEN CONSENT.

350 2200 3700 5800 3700 3700 3700 3700 1850 1850 3700 3700 3700 3700 3700 3700 2200 350 UPPER ROOF LEVEL DO NOT SCALE DRGS. DIMENSIONS ON THE DRGS GOVERN
ALL DIMENSIONS ARE IN MILLIMETRES UNLESS NOTED OTHERWISE.
65.450 ALL DIMENSIONS SHALL BE CHECKED / VERIFIED ON SITE BEFORE PROCEEDING
WITH THE WORK.
ANY AREAS INDICATED ON THIS SHEET ARE APPROXIMATE AND INDICATIVE ONLY
ROOF LEVEL CONTRACTOR SHALL NOTIFY IN WRITING OF ANY DISCREPANCIES 60 DAYS

2550

2550
BEFORE COMMENCEMENT OF WORK
62.900 ALL PROPOSED WORKS TO BE CARRIED OUT IN ACCORDANCE WITH HAO
ARCHITECTS DESIGN DRAWINGS, TECHNICAL SPECIFICATIONS AND SCHEDULES
FOR ARCHITECTURAL WORKS.
LEVEL 18 ALL SPECIALIST CONSULTANTS AS LISTED BELOW SHOULD CO-ORDINATE THEIR

1500 1500 1400

6950
DESIGNS IN ACCORDANCE WITH HAO ARCHITECTS DESIGN DRAWINGS.
61.500 - STRUCTURAL DESIGN.
- LIFE AND SAFETY

4400
- MEP SERVICES.
L4 L3 L5 L3 L3 L3 L3 L3 L3 L3 L3 L3 L3 L3 L3 L4
LIFT BASE READ THIS DRAWING IN CONJUNCTION WITH ALL OTHER CONSULTANT'S AND
SPECIALIST'S DRAWINGS, DETAILS, SCHEDULES AND SPECIFICATIONS
FIT OUT CONTRACTOR MUST PREPARE FULL SHOP DRAWINGS AND MATERIALS
60.000 SUBMITTALS WITH SPECIFIC REFERENCE TO SITE CONDITIONS FOR H-AO
APPROVAL PRIOR TO MANUFACTURE INSTALLATION AND SHOULD BE CO-
ORDINATED WITH ALL CONSULTANTS INVOLVED.
TERRACE LEVEL ALL CONSULTANTS, SPECIALISTS, SUPPLIERS, MANUFACTURERS, ETC. MUST
REFER TO GENERAL LAYOUT PLANS FOR ACTUAL LOCATIONS OF APARTMENTS.

3000
W03 W04 W02 W03 W03 W03 W03 W03 W03 W03 W03 W03
W01 W01 58.500 FIGURED DIMENSIONS ARE TO BE USED IN PREFERENCE TO SCALES. ALL
DIMENSIONS MUST BE CHECKED AGAINST SITE SIZES BEFORE COMMENCING
WORK.
DRAWING CONVEY THE DESIGN INTENT. CONTRACTOR TO PREPARE COORDINATED
16 SHOP DRAWINGS OF ALL DISCIPLINES BEFORE CONSTRUCTION ON SITE.
FIT OUT CONTRACTOR MUST APPLY FIRE RETARDANT LACQUER TO ALL
55.500 MILLWORKS AND VENEERED PANELS WITH A PRODUCT WHICH IS COMPLIANT TO
ALL CIVIL DEFENSE REQUIREMENTS FOR SURFACE SPREAD OF FLAME.

3000
W02 W04 W03 W02 W03 W03 W02 W02 W03 W02 W03 W02 CONTRACTOR MUST SUBMIT APPROVED CERTIFICATES ON COMPLETION OF THE
W01 W01 WORKS ON SITE.

15
52.500 KEY PLAN

3000
W03 W04 W02 W03 W02 W02 W03 W03 W02 W03 W02 W03
W01 W01

14
49.500

3000
W02 W04 W03 W02 W03 W03 W02 W02 W03 W02 W03 W02
W01 W01

13
46.500

3000
W03 W04 W02 W03 W02 W02 W03 W03 W02 W03 W02 W03
W01 W01

12
43.500

3000
W02 W04 W03 W02 W03 W03 W02 W02 W03 W02 W03 W02
W01 W01

11
40.500

3000
W03 W04 W02 W03 W02 W02 W03 W03 W02 W03 W02 W03
W01 W01

10
37.500

3000
W02 W04 W03 W02 W03 W03 W02 W02 W03 W02 W03 W02
W01 W01

48000
34.500

3000
W03 W04 W02 W03 W02 W01 W02 W03 W01 W03 W02 W03 W02 W03

55500
31.500

3000
W02 W04 W03 W01 W03 W02 W01 W02 W03 W02 W03 W01 W01 W02

7
28.500

3000
W03 W04 W02 W01 W02 W03 W01 W03 W02 W03 W02 W01 W01 W03

6
25.500

3000
W02 W04 W03 W01 W03 W02 W01 W02 W03 W02 W03 W01 W01 W02

5 R0
NO.
06/12/2019
DATE
FOR APPROVAL
DESCRIPTION
CLIENT
ISSUED TO

22.500
NOT FOR CONSTRUCTION

3000
W03 W04 W02 W01 W02 W03 W01 W03 W02 W03 W02 W01 W01 W03

4 MAIN CONSULTANT / ARCHITECT / INTERIOR DESIGNER

STRUCURAL DESIGNER / MEP DESIGNER
19.500
HAO ARCHITECTURAL & ENGINEERING CONSULTANCY

3000
W02 W04 W03 W01 W03 W02 W01 W02 W03 W02 W03 W01 W01 W02
P.O. Box 25646, Dubai United Arab Emirates
T +9714-358 6660
F +9714-358 6663
3 E [email protected]

16.500 CLIENT

3000
W03 W04 W02 W01 W02 W03 W01 W03 W02 W03 W02 W01 W01 W03
MR. PESHRAW AGHA
2
13.500 PROJECT

3000
W02 W04 W03 W01 W03 W02 W01 W02 W03 W02 W03 W01 W01 W02

1 EMPIRE SQUARE
PARCEL 5
10.500
EMPIRE WORLD

3000
BLOCK 1

4500
LEVEL MEZZANINE 2 DRAWING TITLE

1500
7.500
ARCHITECTURAL ELEVATION
LEVEL MEZZANINE 1
ARCHITECTURAL ELEVATION -1
3000
6.000

5400
LEVEL GROUND UPPER
SCALE DATE ISSUED BY
3.000
2400

2400 LEVEL GROUND LOWER

1 : 150 06/12/2019 MR
PROJECT NO. DRAWING NUMBER REVISION
0.600
H201504 A-T1-201 R0
ISSUED FOR

APPROVAL
ARCHITECTURE

SCHEMATIC DESIGN STAGE

© HAO 2019 PRINTED - 12/5/2019 3:43:04 PM
1.J 1.H 1.G 1.F 1.E 1.D 1.C 1.B 1.A
ARCHITECTS

GENERAL NOTES
COPYRIGHT OF THIS DRG REMAINS WITH HAO ARCHITECTS AND MAY NOT BE
23500 REPRODUCED WITHOUT PRIOR WRITTEN CONSENT.
DO NOT SCALE DRGS. DIMENSIONS ON THE DRGS GOVERN
1550 6250 3050 900900 3050 6250 1550 UPPER ROOF LEVEL ALL DIMENSIONS ARE IN MILLIMETRES UNLESS NOTED OTHERWISE.
ALL DIMENSIONS SHALL BE CHECKED / VERIFIED ON SITE BEFORE PROCEEDING
65.450 WITH THE WORK.
ANY AREAS INDICATED ON THIS SHEET ARE APPROXIMATE AND INDICATIVE ONLY

ROOF LEVEL CONTRACTOR SHALL NOTIFY IN WRITING OF ANY DISCREPANCIES 60 DAYS

BEFORE COMMENCEMENT OF WORK

2550

2550
ALL PROPOSED WORKS TO BE CARRIED OUT IN ACCORDANCE WITH HAO
62.900 ARCHITECTS DESIGN DRAWINGS, TECHNICAL SPECIFICATIONS AND SCHEDULES
FOR ARCHITECTURAL WORKS.
ALL SPECIALIST CONSULTANTS AS LISTED BELOW SHOULD CO-ORDINATE THEIR
LEVEL 18 DESIGNS IN ACCORDANCE WITH HAO ARCHITECTS DESIGN DRAWINGS.

1500 1500 1400

6950
- STRUCTURAL DESIGN.
61.500 - LIFE AND SAFETY
- MEP SERVICES.
L7 L6 L6 L6 L6 L7

4400
READ THIS DRAWING IN CONJUNCTION WITH ALL OTHER CONSULTANT'S AND
SPECIALIST'S DRAWINGS, DETAILS, SCHEDULES AND SPECIFICATIONS
LIFT BASE FIT OUT CONTRACTOR MUST PREPARE FULL SHOP DRAWINGS AND MATERIALS
SUBMITTALS WITH SPECIFIC REFERENCE TO SITE CONDITIONS FOR H-AO
60.000 APPROVAL PRIOR TO MANUFACTURE INSTALLATION AND SHOULD BE CO-
ORDINATED WITH ALL CONSULTANTS INVOLVED.
ALL CONSULTANTS, SPECIALISTS, SUPPLIERS, MANUFACTURERS, ETC. MUST
REFER TO GENERAL LAYOUT PLANS FOR ACTUAL LOCATIONS OF APARTMENTS.
TERRACE LEVEL
FIGURED DIMENSIONS ARE TO BE USED IN PREFERENCE TO SCALES. ALL
L2 L2

3000
DIMENSIONS MUST BE CHECKED AGAINST SITE SIZES BEFORE COMMENCING
58.500 WORK.
DRAWING CONVEY THE DESIGN INTENT. CONTRACTOR TO PREPARE COORDINATED
SHOP DRAWINGS OF ALL DISCIPLINES BEFORE CONSTRUCTION ON SITE.
L1 L1 16 FIT OUT CONTRACTOR MUST APPLY FIRE RETARDANT LACQUER TO ALL
MILLWORKS AND VENEERED PANELS WITH A PRODUCT WHICH IS COMPLIANT TO
ALL CIVIL DEFENSE REQUIREMENTS FOR SURFACE SPREAD OF FLAME.
55.500 CONTRACTOR MUST SUBMIT APPROVED CERTIFICATES ON COMPLETION OF THE

3000
WORKS ON SITE.

L1 L1 15
KEY PLAN
52.500

3000
L1 L1 14
49.500

3000
L1 L1 13
46.500

3000
L1 L1 12
43.500

3000
L1 L1 11
40.500

3000
L1 L1 10
37.500

3000
9

48000
L1 L1

34.500

3000
L1 L1 8
31.500

3000

57900
L1 L1 7
28.500

3000
L1 L1 6
25.500

3000
R0 06/12/2019 FOR APPROVAL CLIENT
NO. DATE DESCRIPTION ISSUED TO
L1 L1 5
22.500 NOT FOR CONSTRUCTION

3000
MAIN CONSULTANT / ARCHITECT / INTERIOR DESIGNER
L1 L1 4 STRUCURAL DESIGNER / MEP DESIGNER

19.500 HAO ARCHITECTURAL & ENGINEERING CONSULTANCY

3000
P.O. Box 25646, Dubai United Arab Emirates
T +9714-358 6660
F +9714-358 6663
E [email protected]
L1 L1 3
CLIENT
16.500
MR. PESHRAW AGHA
L1 L1 3000 2
PROJECT
13.500
L2 L2
3000

EMPIRE SQUARE
1 PARCEL 5
10.500 EMPIRE WORLD
BLOCK 1
3000

LEVEL MEZZANINE 2 DRAWING TITLE

1500

7500

7.500 ARCHITECTURAL ELEVATION

LEVEL MEZZANINE 1 ARCHITECTURAL ELEVATION -2
3000

6.000
LEVEL GROUND UPPER SCALE DATE ISSUED BY

3.000
2400

2400

1 : 150 06/12/2019 MR
LEVEL GROUND LOWER PROJECT NO. DRAWING NUMBER REVISION

0.600
H201504 A-T1-202 R0
ISSUED FOR

APPROVAL
ARCHITECTURE

SCHEMATIC DESIGN STAGE

© HAO 2019 PRINTED - 12/5/2019 3:43:07 PM
1.19 1.18 1.17 1.16 1.15 1.14 1.13 1.12 1.11 1.10 1.9 1.8 1.7 1.6 1.5 1.4 1.3 1.2 1.1 ARCHITECTS

GENERAL NOTES
COPYRIGHT OF THIS DRG REMAINS WITH HAO ARCHITECTS AND MAY NOT BE
REPRODUCED WITHOUT PRIOR WRITTEN CONSENT.
DO NOT SCALE DRGS. DIMENSIONS ON THE DRGS GOVERN
ALL DIMENSIONS ARE IN MILLIMETRES UNLESS NOTED OTHERWISE.
ALL DIMENSIONS SHALL BE CHECKED / VERIFIED ON SITE BEFORE PROCEEDING
55300 WITH THE WORK.
ANY AREAS INDICATED ON THIS SHEET ARE APPROXIMATE AND INDICATIVE ONLY
CONTRACTOR SHALL NOTIFY IN WRITING OF ANY DISCREPANCIES 60 DAYS
BEFORE COMMENCEMENT OF WORK
350 2200 3700 3700 3700 3700 3700 3700 1850 1850 3700 3700 3700 3700 5800 3700 2200 350 UPPER ROOF LEVEL ALL PROPOSED WORKS TO BE CARRIED OUT IN ACCORDANCE WITH HAO
ARCHITECTS DESIGN DRAWINGS, TECHNICAL SPECIFICATIONS AND SCHEDULES
FOR ARCHITECTURAL WORKS.
65.450 ALL SPECIALIST CONSULTANTS AS LISTED BELOW SHOULD CO-ORDINATE THEIR
DESIGNS IN ACCORDANCE WITH HAO ARCHITECTS DESIGN DRAWINGS.
ROOF LEVEL - STRUCTURAL DESIGN.
- LIFE AND SAFETY
- MEP SERVICES.

2550

2550
62.900 READ THIS DRAWING IN CONJUNCTION WITH ALL OTHER CONSULTANT'S AND
SPECIALIST'S DRAWINGS, DETAILS, SCHEDULES AND SPECIFICATIONS
FIT OUT CONTRACTOR MUST PREPARE FULL SHOP DRAWINGS AND MATERIALS
LEVEL 18 SUBMITTALS WITH SPECIFIC REFERENCE TO SITE CONDITIONS FOR H-AO

1500 1500 1400

APPROVAL PRIOR TO MANUFACTURE INSTALLATION AND SHOULD BE CO-

6950
ORDINATED WITH ALL CONSULTANTS INVOLVED.
61.500 ALL CONSULTANTS, SPECIALISTS, SUPPLIERS, MANUFACTURERS, ETC. MUST
REFER TO GENERAL LAYOUT PLANS FOR ACTUAL LOCATIONS OF APARTMENTS.

4400
L4 L3 L3 L3 L3 L3 L3 L3 L3 L3 L3 L3 L3 L5 L3 L4
FIGURED DIMENSIONS ARE TO BE USED IN PREFERENCE TO SCALES. ALL
LIFT BASE DIMENSIONS MUST BE CHECKED AGAINST SITE SIZES BEFORE COMMENCING
WORK.
DRAWING CONVEY THE DESIGN INTENT. CONTRACTOR TO PREPARE COORDINATED
60.000 SHOP DRAWINGS OF ALL DISCIPLINES BEFORE CONSTRUCTION ON SITE.
FIT OUT CONTRACTOR MUST APPLY FIRE RETARDANT LACQUER TO ALL
MILLWORKS AND VENEERED PANELS WITH A PRODUCT WHICH IS COMPLIANT TO
TERRACE LEVEL ALL CIVIL DEFENSE REQUIREMENTS FOR SURFACE SPREAD OF FLAME.
CONTRACTOR MUST SUBMIT APPROVED CERTIFICATES ON COMPLETION OF THE

3000
WORKS ON SITE.
W03 W03 W03 W03 W03 W03 W03 W03 W03 W02 W04 W03
W01 W01 58.500
16
KEY PLAN
55.500

3000
W02 W03 W02 W03 W02 W02 W03 W03 W02 W03 W04 W02
W01 W01

15
52.500

3000
W03 W02 W03 W02 W03 W03 W02 W02 W03 W02 W04 W03
W01 W01

14
49.500

3000
W02 W03 W02 W03 W02 W02 W03 W03 W02 W03 W04 W02
W01 W01

13
46.500

3000
W03 W02 W03 W02 W03 W03 W02 W02 W03 W02 W04 W03
W01 W01

12
43.500

3000
W02 W03 W02 W03 W02 W02 W03 W03 W02 W03 W04 W02
W01 W01

11
40.500

3000
W03 W02 W03 W02 W03 W03 W02 W02 W03 W02 W04 W03
W01 W01

10
37.500

3000
W02 W03 W02 W03 W02 W02 W03 W03 W02 W03 W04 W02
W01 W01

9
34.500

51000
3000
W03 W02 W03 W02 W03 W01 W03 W02 W01 W02 W03 W02 W04 W03

55500
31.500

3000
W02 W01 W01 W03 W02 W03 W02 W01 W02 W03 W01 W03 W04 W02

7
28.500

3000
W03 W01 W01 W02 W03 W02 W03 W01 W03 W02 W01 W02 W04 W03
R0 06/12/2019 FOR APPROVAL CLIENT
NO. DATE DESCRIPTION ISSUED TO
6
25.500 NOT FOR CONSTRUCTION

3000
W02 W01 W01 W03 W02 W03 W02 W01 W02 W03 W01 W03 W04 W02
MAIN CONSULTANT / ARCHITECT / INTERIOR DESIGNER
5 STRUCURAL DESIGNER / MEP DESIGNER

22.500 HAO ARCHITECTURAL & ENGINEERING CONSULTANCY

3000
P.O. Box 25646, Dubai United Arab Emirates
W03 W01 W01 W02 W03 W02 W03 W01 W03 W02 W01 W02 W04 W03 T +9714-358 6660
F +9714-358 6663
E [email protected]
4
CLIENT
19.500
MR. PESHRAW AGHA

3000
W02 W01 W01 W03 W02 W03 W02 W01 W02 W03 W01 W03 W04 W02

3
PROJECT
16.500

3000
W03 W01 W01 W02 W03 W02 W03 W01 W03 W02 W01 W02 W04 W03
EMPIRE SQUARE
2 PARCEL 5
13.500 EMPIRE WORLD
BLOCK 1

3000
W02 W01 W01 W03 W02 W03 W02 W01 W02 W03 W01 W03 W04 W02

DRAWING TITLE
1
10.500 ARCHITECTURAL ELEVATION
3000
W02 W03 W02 W03 W03 W02 W02 W03
W01 W01 W04
W01 ARCHITECTURAL ELEVATION -3
LEVEL MEZZANINE 2
1500

7.500
SCALE DATE ISSUED BY
LEVEL MEZZANINE 1
4500

1 : 150 06/12/2019 MR
3000

6.000
PROJECT NO. DRAWING NUMBER REVISION
LEVEL GROUND UPPER
3.000 H201504 A-T1-203 R0
ISSUED FOR

APPROVAL
ARCHITECTURE

SCHEMATIC DESIGN STAGE

© HAO 2019 PRINTED - 12/5/2019 3:43:12 PM
 ARCHITECTS
1.A 1.B 1.C 1.D 1.E 1.F 1.G 1.H 1.J
GENERAL NOTES
COPYRIGHT OF THIS DRG REMAINS WITH HAO ARCHITECTS AND MAY NOT BE
REPRODUCED WITHOUT PRIOR WRITTEN CONSENT.
DO NOT SCALE DRGS. DIMENSIONS ON THE DRGS GOVERN
23500 ALL DIMENSIONS ARE IN MILLIMETRES UNLESS NOTED OTHERWISE.
ALL DIMENSIONS SHALL BE CHECKED / VERIFIED ON SITE BEFORE PROCEEDING
1550 6250 3050 900900 3050 6250 1550 UPPER ROOF LEVEL WITH THE WORK.
ANY AREAS INDICATED ON THIS SHEET ARE APPROXIMATE AND INDICATIVE ONLY

65.450 CONTRACTOR SHALL NOTIFY IN WRITING OF ANY DISCREPANCIES 60 DAYS

BEFORE COMMENCEMENT OF WORK
ALL PROPOSED WORKS TO BE CARRIED OUT IN ACCORDANCE WITH HAO
ROOF LEVEL ARCHITECTS DESIGN DRAWINGS, TECHNICAL SPECIFICATIONS AND SCHEDULES

2550

2550
FOR ARCHITECTURAL WORKS.
ALL SPECIALIST CONSULTANTS AS LISTED BELOW SHOULD CO-ORDINATE THEIR
62.900 DESIGNS IN ACCORDANCE WITH HAO ARCHITECTS DESIGN DRAWINGS.
- STRUCTURAL DESIGN.
- LIFE AND SAFETY
LEVEL 18

1500 1500 1400

- MEP SERVICES.

6950
READ THIS DRAWING IN CONJUNCTION WITH ALL OTHER CONSULTANT'S AND
61.500 SPECIALIST'S DRAWINGS, DETAILS, SCHEDULES AND SPECIFICATIONS

4400
FIT OUT CONTRACTOR MUST PREPARE FULL SHOP DRAWINGS AND MATERIALS
L7 L6 L6 L6 L6 L7
LIFT BASE SUBMITTALS WITH SPECIFIC REFERENCE TO SITE CONDITIONS FOR H-AO
APPROVAL PRIOR TO MANUFACTURE INSTALLATION AND SHOULD BE CO-
ORDINATED WITH ALL CONSULTANTS INVOLVED.
60.000 ALL CONSULTANTS, SPECIALISTS, SUPPLIERS, MANUFACTURERS, ETC. MUST
REFER TO GENERAL LAYOUT PLANS FOR ACTUAL LOCATIONS OF APARTMENTS.
FIGURED DIMENSIONS ARE TO BE USED IN PREFERENCE TO SCALES. ALL
TERRACE LEVEL DIMENSIONS MUST BE CHECKED AGAINST SITE SIZES BEFORE COMMENCING
WORK.
DRAWING CONVEY THE DESIGN INTENT. CONTRACTOR TO PREPARE COORDINATED

3000
L2 L2
58.500 SHOP DRAWINGS OF ALL DISCIPLINES BEFORE CONSTRUCTION ON SITE.
FIT OUT CONTRACTOR MUST APPLY FIRE RETARDANT LACQUER TO ALL
MILLWORKS AND VENEERED PANELS WITH A PRODUCT WHICH IS COMPLIANT TO
L1 L1 16 ALL CIVIL DEFENSE REQUIREMENTS FOR SURFACE SPREAD OF FLAME.
CONTRACTOR MUST SUBMIT APPROVED CERTIFICATES ON COMPLETION OF THE
WORKS ON SITE.
55.500

3000
KEY PLAN
L1 L1 15
52.500

3000
L1 L1 14
49.500

3000
L1 L1 13
46.500

3000
L1 L1 12
43.500

3000
L1 L1 11
40.500

3000
L1 L1 10
37.500

3000
L1 L1 9
34.500

3000
L1 L1 8

55500

55500
31.500

3000
L1 L1 7
28.500

3000
L1 L1 6
25.500

3000
R0 06/12/2019 FOR APPROVAL CLIENT
NO. DATE DESCRIPTION ISSUED TO

L1 L1 5 NOT FOR CONSTRUCTION

22.500

3000
MAIN CONSULTANT / ARCHITECT / INTERIOR DESIGNER
STRUCURAL DESIGNER / MEP DESIGNER

L1 L1 4 HAO ARCHITECTURAL & ENGINEERING CONSULTANCY

P.O. Box 25646, Dubai United Arab Emirates
19.500 T +9714-358 6660
F +9714-358 6663
3000

E [email protected]

CLIENT
L1 L1 3
16.500 MR. PESHRAW AGHA
3000

L1 L1 2 PROJECT

13.500
EMPIRE SQUARE
3000

L2 L2
PARCEL 5
1 EMPIRE WORLD
10.500 BLOCK 1
W02
W03 W02
W03
3000

DRAWING TITLE
LEVEL MEZZANINE 2
ARCHITECTURAL ELEVATION
1500

7.500
ARCHITECTURAL ELEVATION -4
LEVEL MEZZANINE 1
3000

6.000 SCALE DATE ISSUED BY

LEVEL GROUND UPPER
3.000 1 : 150 06/12/2019 MR
PROJECT NO. DRAWING NUMBER REVISION

H201504 A-T1-204 R0
ISSUED FOR

APPROVAL
ARCHITECTURE

SCHEMATIC DESIGN STAGE

© HAO 2019 PRINTED - 12/5/2019 3:43:17 PM
1.A 1.B 1.C 1.D 1.E 1.F 1.G 1.H 1.J

23500
1550 6250 3050 900900 3050 6250 1550
UPPER ROOF LEVEL ARCHITECTS
65.450
GENERAL NOTES
ROOF LEVEL

2550

2550
COPYRIGHT OF THIS DRG REMAINS WITH HAO ARCHITECTS AND MAY NOT BE
REPRODUCED WITHOUT PRIOR WRITTEN CONSENT.
62.900 DO NOT SCALE DRGS. DIMENSIONS ON THE DRGS GOVERN

600

600
ALL DIMENSIONS ARE IN MILLIMETRES UNLESS NOTED OTHERWISE.

150

150
LEVEL 18 ALL DIMENSIONS SHALL BE CHECKED / VERIFIED ON SITE BEFORE PROCEEDING

1500 1500 1400

6950
WITH THE WORK.
L3 L3
61.500 ANY AREAS INDICATED ON THIS SHEET ARE APPROXIMATE AND INDICATIVE ONLY
CONTRACTOR SHALL NOTIFY IN WRITING OF ANY DISCREPANCIES 60 DAYS

4400
4600

4600
BEFORE COMMENCEMENT OF WORK

4400
4450
LIFT BASE ALL PROPOSED WORKS TO BE CARRIED OUT IN ACCORDANCE WITH HAO
ARCHITECTS DESIGN DRAWINGS, TECHNICAL SPECIFICATIONS AND SCHEDULES
FOR ARCHITECTURAL WORKS.

STAIRCASE 1
60.000 ALL SPECIALIST CONSULTANTS AS LISTED BELOW SHOULD CO-ORDINATE THEIR
DESIGNS IN ACCORDANCE WITH HAO ARCHITECTS DESIGN DRAWINGS.
- STRUCTURAL DESIGN.
TERRACE LEVEL - LIFE AND SAFETY
- MEP SERVICES.
W02 W02

3000
READ THIS DRAWING IN CONJUNCTION WITH ALL OTHER CONSULTANT'S AND
58.500

2700

2700
SPECIALIST'S DRAWINGS, DETAILS, SCHEDULES AND SPECIFICATIONS
STORAGE/UTILITY STORAGE/UTILITY
FIT OUT CONTRACTOR MUST PREPARE FULL SHOP DRAWINGS AND MATERIALS
BEDROOM-01 PASSAGE LOBBY STAIRCASE 1 PASSAGE BEDROOM-01
16 SUBMITTALS WITH SPECIFIC REFERENCE TO SITE CONDITIONS FOR H-AO
APPROVAL PRIOR TO MANUFACTURE INSTALLATION AND SHOULD BE CO-
ORDINATED WITH ALL CONSULTANTS INVOLVED.

W03 W03
55.500 ALL CONSULTANTS, SPECIALISTS, SUPPLIERS, MANUFACTURERS, ETC. MUST

3000
REFER TO GENERAL LAYOUT PLANS FOR ACTUAL LOCATIONS OF APARTMENTS.

2690

2690
STORAGE/UTILITY STORAGE/UTILITY FIGURED DIMENSIONS ARE TO BE USED IN PREFERENCE TO SCALES. ALL
DIMENSIONS MUST BE CHECKED AGAINST SITE SIZES BEFORE COMMENCING
BEDROOM-01 PASSAGE LOBBY STAIRCASE 1 PASSAGE BEDROOM-01
15 WORK.
DRAWING CONVEY THE DESIGN INTENT. CONTRACTOR TO PREPARE COORDINATED
SHOP DRAWINGS OF ALL DISCIPLINES BEFORE CONSTRUCTION ON SITE.

W02 W02
52.500 FIT OUT CONTRACTOR MUST APPLY FIRE RETARDANT LACQUER TO ALL
MILLWORKS AND VENEERED PANELS WITH A PRODUCT WHICH IS COMPLIANT TO

3000
ALL CIVIL DEFENSE REQUIREMENTS FOR SURFACE SPREAD OF FLAME.

2690

2690
CONTRACTOR MUST SUBMIT APPROVED CERTIFICATES ON COMPLETION OF THE
STORAGE/UTILITY STORAGE/UTILITY
WORKS ON SITE.
BEDROOM-01 PASSAGE LOBBY STAIRCASE 1 PASSAGE BEDROOM-01
14

W03 W03
49.500 KEY PLAN

3000
2690

2690
STORAGE/UTILITY STORAGE/UTILITY

BEDROOM-01 PASSAGE LOBBY STAIRCASE 1 PASSAGE BEDROOM-01

13

W02 W02
46.500

3000
2690

2690
STORAGE/UTILITY STORAGE/UTILITY

BEDROOM-01 PASSAGE LOBBY STAIRCASE 1 PASSAGE BEDROOM-01

12

W03 W03
43.500

3000
2690

2690
STORAGE/UTILITY STORAGE/UTILITY

BEDROOM-01 PASSAGE LOBBY STAIRCASE 1 PASSAGE BEDROOM-01

11

W02 W02
40.500

3000
2690

2690
STORAGE/UTILITY STORAGE/UTILITY

BEDROOM-01 PASSAGE LOBBY STAIRCASE 1 PASSAGE BEDROOM-01

10

W03 W03
37.500

3000
2690

2690
STORAGE/UTILITY STORAGE/UTILITY

48000
BEDROOM-01 PASSAGE LOBBY STAIRCASE 1 PASSAGE BEDROOM-01

W02 W02
34.500

3000
2690

2690
STORAGE/UTILITY STORAGE/UTILITY

BEDROOM-01 PASSAGE LOBBY STAIRCASE 1 PASSAGE BEDROOM-01

8

55500
W03 W03
31.500

3000
2690

2690
BEDROOM-01 STUDY ROOM LOBBY STAIRCASE 1 STUDY ROOM BEDROOM-01
7

W02 W02
28.500

3000
2690

2690
BEDROOM-01 STUDY ROOM LOBBY STAIRCASE 1 STUDY ROOM BEDROOM-01
6

W03 W03
25.500

3000
2690

2690
BEDROOM-01 STUDY ROOM LOBBY STAIRCASE 1 STUDY ROOM BEDROOM-01
5

W02 W02
22.500

3000
2690

2690
BEDROOM-01 STUDY ROOM LOBBY STAIRCASE 1 STUDY ROOM BEDROOM-01
4 R0 06/12/2019 FOR APPROVAL CLIENT
NO. DATE DESCRIPTION ISSUED TO

W03 W03
19.500
NOT FOR CONSTRUCTION

3000
2690

2690

BEDROOM-01 STUDY ROOM LOBBY STAIRCASE 1 STUDY ROOM BEDROOM-01

3
MAIN CONSULTANT / ARCHITECT / INTERIOR DESIGNER
STRUCURAL DESIGNER / MEP DESIGNER
W02 W02
16.500

3000
HAO ARCHITECTURAL & ENGINEERING CONSULTANCY
2690

2690

P.O. Box 25646, Dubai United Arab Emirates

T +9714-358 6660
BEDROOM-01 STUDY ROOM LOBBY STAIRCASE 1 STUDY ROOM BEDROOM-01
2 F +9714-358 6663
E [email protected]

W03 W03
13.500 CLIENT
3000
2690

2690

MR. PESHRAW AGHA

BEDROOM-01 STUDY ROOM LOBBY STAIRCASE 1 STUDY ROOM BEDROOM-01
1

W02
10.500
PROJECT
3000
2690

4500
4200

BEDROOM-01 STUDY ROOM LOBBY STAIRCASE 1

RETAIL01 LEVEL MEZZANINE 2 EMPIRE SQUARE
1500

7.500 PARCEL 5
EMPIRE WORLD
LEVEL MEZZANINE 1 BLOCK 1
4190

3000

6.000
ENT.LOBBY DRAWING TITLE
SERVICES
5400

STAIRCASE 1 LEVEL GROUND UPPER

5090

RETAIL03 ARCHITECTURAL SECTION

3.000
ARCHITECTURAL SECTION -1
1800 600 2400

G. RM.
LEVEL GROUND LOWER
4490

LOBBY
0.600
SCALE DATE ISSUED BY

GATE LEVEL
9300

STAIRCASE 1
4800

1 : 150 06/12/2019 MR
4490

0.000
2400

PROJECT NO. DRAWING NUMBER REVISION

LEVEL BASEMENT UPPER
H201504 A-T1-301 R0
4200

-1.800
2100

2100

LOBBY ISSUED FOR

STAIRCASE 1 LEVEL BASEMENT LOWER
APPROVAL
-4.200
LEVEL BASEMENT 2 ARCHITECTURE
-6.300
SCHEMATIC DESIGN STAGE
© HAO 2019 PRINTED - 12/5/2019 3:43:26 PM
1.1 1.2 1.3 1.4 1.5 1.6 1.7 1.8 1.9 1.10 1.11 1.12 1.13 1.14 1.15 1.16 1.17 1.18 1.19

55300 UPPER ROOF LEVEL

350 2200 3700 5800 3700 3700 3700 3700 1850 1850 3700 3700 3700 3700 3700 3700 2200 350 65.450
ROOF LEVEL ARCHITECTS

2550

2550
62.900
LEVEL 18

150

150

150

150
GENERAL NOTES

1500 1500 1400

61.500

6950
COPYRIGHT OF THIS DRG REMAINS WITH HAO ARCHITECTS AND MAY NOT BE
REPRODUCED WITHOUT PRIOR WRITTEN CONSENT.
DO NOT SCALE DRGS. DIMENSIONS ON THE DRGS GOVERN

5250

5250
LIFT BASE

4400
ALL DIMENSIONS ARE IN MILLIMETRES UNLESS NOTED OTHERWISE.

4450

4450

4450

4450
ALL DIMENSIONS SHALL BE CHECKED / VERIFIED ON SITE BEFORE PROCEEDING
60.000 WITH THE WORK.
ANY AREAS INDICATED ON THIS SHEET ARE APPROXIMATE AND INDICATIVE ONLY
CONTRACTOR SHALL NOTIFY IN WRITING OF ANY DISCREPANCIES 60 DAYS
STAIRCASE 1
SERVICES SERVICES SERVICES
STAIRCASE 2 TERRACE LEVEL BEFORE COMMENCEMENT OF WORK
ALL PROPOSED WORKS TO BE CARRIED OUT IN ACCORDANCE WITH HAO
58.500 ARCHITECTS DESIGN DRAWINGS, TECHNICAL SPECIFICATIONS AND SCHEDULES
FOR ARCHITECTURAL WORKS.

3000
ALL SPECIALIST CONSULTANTS AS LISTED BELOW SHOULD CO-ORDINATE THEIR

2650

2650
DESIGNS IN ACCORDANCE WITH HAO ARCHITECTS DESIGN DRAWINGS.
- STRUCTURAL DESIGN.
SERVICE AREA KITCHEN VESTIBULE
STAIRCASE 1
S.P.D.
BATH VESTIBULE
STUDY ROOM VESTIBULE KITCHEN BATH VESTIBULE STUDY ROOM VESTIBULE KITCHEN BATH VESTIBULE S.P.D.
STAIRCASE 2
VESTIBULE KITCHEN SERVICE AREA
16 - LIFE AND SAFETY
- MEP SERVICES.
READ THIS DRAWING IN CONJUNCTION WITH ALL OTHER CONSULTANT'S AND
55.500 SPECIALIST'S DRAWINGS, DETAILS, SCHEDULES AND SPECIFICATIONS

3000
FIT OUT CONTRACTOR MUST PREPARE FULL SHOP DRAWINGS AND MATERIALS

2690

2690
SUBMITTALS WITH SPECIFIC REFERENCE TO SITE CONDITIONS FOR H-AO
APPROVAL PRIOR TO MANUFACTURE INSTALLATION AND SHOULD BE CO-
SERVICE AREA KITCHEN VESTIBULE
STAIRCASE 1
S.P.D.
BATH VESTIBULE
STUDY ROOM VESTIBULE KITCHEN BATH VESTIBULE STUDY ROOM VESTIBULE KITCHEN BATH VESTIBULE S.P.D.
STAIRCASE 2
VESTIBULE KITCHEN SERVICE AREA
15 ORDINATED WITH ALL CONSULTANTS INVOLVED.
ALL CONSULTANTS, SPECIALISTS, SUPPLIERS, MANUFACTURERS, ETC. MUST
REFER TO GENERAL LAYOUT PLANS FOR ACTUAL LOCATIONS OF APARTMENTS.
52.500 FIGURED DIMENSIONS ARE TO BE USED IN PREFERENCE TO SCALES. ALL

3000
DIMENSIONS MUST BE CHECKED AGAINST SITE SIZES BEFORE COMMENCING
2690

2690
WORK.
DRAWING CONVEY THE DESIGN INTENT. CONTRACTOR TO PREPARE COORDINATED
SHOP DRAWINGS OF ALL DISCIPLINES BEFORE CONSTRUCTION ON SITE.
SERVICE AREA KITCHEN VESTIBULE
STAIRCASE 1
S.P.D.
BATH VESTIBULE
STUDY ROOM VESTIBULE KITCHEN BATH VESTIBULE STUDY ROOM VESTIBULE KITCHEN BATH VESTIBULE S.P.D.
STAIRCASE 2
VESTIBULE KITCHEN SERVICE AREA
14 FIT OUT CONTRACTOR MUST APPLY FIRE RETARDANT LACQUER TO ALL
MILLWORKS AND VENEERED PANELS WITH A PRODUCT WHICH IS COMPLIANT TO
ALL CIVIL DEFENSE REQUIREMENTS FOR SURFACE SPREAD OF FLAME.
49.500 CONTRACTOR MUST SUBMIT APPROVED CERTIFICATES ON COMPLETION OF THE

3000
WORKS ON SITE.
2690

2690
SERVICE AREA KITCHEN VESTIBULE
STAIRCASE 1
S.P.D.
BATH VESTIBULE
STUDY ROOM VESTIBULE KITCHEN BATH VESTIBULE STUDY ROOM VESTIBULE KITCHEN BATH VESTIBULE S.P.D.
STAIRCASE 2
VESTIBULE KITCHEN SERVICE AREA
13
KEY PLAN
46.500

3000
2690

2690
SERVICE AREA KITCHEN VESTIBULE
STAIRCASE 1
S.P.D.
BATH VESTIBULE
STUDY ROOM VESTIBULE KITCHEN BATH VESTIBULE STUDY ROOM VESTIBULE KITCHEN BATH VESTIBULE S.P.D.
STAIRCASE 2
VESTIBULE KITCHEN SERVICE AREA
12
43.500

3000
2690

2690
SERVICE AREA KITCHEN VESTIBULE
STAIRCASE 1
S.P.D.
BATH VESTIBULE
STUDY ROOM VESTIBULE KITCHEN BATH VESTIBULE STUDY ROOM VESTIBULE KITCHEN BATH VESTIBULE S.P.D.
STAIRCASE 2
VESTIBULE KITCHEN SERVICE AREA
11
40.500

3000
2690

2690
SERVICE AREA KITCHEN VESTIBULE
STAIRCASE 1
S.P.D.
BATH VESTIBULE
STUDY ROOM VESTIBULE KITCHEN BATH VESTIBULE STUDY ROOM VESTIBULE KITCHEN BATH VESTIBULE S.P.D.
STAIRCASE 2
VESTIBULE KITCHEN SERVICE AREA
10
37.500

3000
2690

2690
9

48000
SERVICE AREA KITCHEN VESTIBULE S.P.D. STUDY ROOM VESTIBULE KITCHEN BATH VESTIBULE STUDY ROOM VESTIBULE KITCHEN BATH VESTIBULE S.P.D. VESTIBULE KITCHEN SERVICE AREA
STAIRCASE 1 BATH VESTIBULE STAIRCASE 2

34.500

3000
2690

2690
STUDY ROOM VESTIBULE KITCHEN BATH VESTIBULE
SERVICE AREA KITCHEN VESTIBULE
STAIRCASE 1
S.P.D. VESTIBULE BATH STUDY ROOM VESTIBULE KITCHEN BATH VESTIBULE S.P.D.
STAIRCASE 2
VESTIBULE KITCHEN SERVICE AREA
8

55500
31.500

3000
2690

2690
SERVICE AREA KITCHEN VESTIBULE
STAIRCASE 1
S.P.D. VESTIBULE KITCHEN KITCHEN VESTIBULE STUDY ROOM
VESTIBULE BATH BATH VESTIBULE VESTIBULE BATH KITCHEN VESTIBULE S.P.D.
STAIRCASE 2
VESTIBULE KITCHEN SERVICE AREA
7
28.500

3000
2690

2690
SERVICE AREA KITCHEN VESTIBULE
STAIRCASE 1
S.P.D. VESTIBULE KITCHEN KITCHEN VESTIBULE STUDY ROOM
VESTIBULE BATH BATH VESTIBULE VESTIBULE BATH KITCHEN VESTIBULE S.P.D.
STAIRCASE 2
VESTIBULE KITCHEN SERVICE AREA
6
25.500

3000
2690

2690
SERVICE AREA KITCHEN VESTIBULE
STAIRCASE 1
S.P.D. VESTIBULE KITCHEN KITCHEN VESTIBULE STUDY ROOM
VESTIBULE BATH BATH VESTIBULE VESTIBULE BATH KITCHEN VESTIBULE S.P.D.
STAIRCASE 2
VESTIBULE KITCHEN SERVICE AREA
5
22.500

3000
2690

2690
SERVICE AREA KITCHEN VESTIBULE
STAIRCASE 1
S.P.D. VESTIBULE KITCHEN KITCHEN VESTIBULE STUDY ROOM
VESTIBULE BATH BATH VESTIBULE VESTIBULE BATH KITCHEN VESTIBULE S.P.D.
STAIRCASE 2
VESTIBULE KITCHEN SERVICE AREA
4
19.500

3000
2690

2690
R0 06/12/2019 FOR APPROVAL CLIENT
NO. DATE DESCRIPTION ISSUED TO
SERVICE AREA KITCHEN VESTIBULE
STAIRCASE 1
S.P.D. VESTIBULE KITCHEN KITCHEN VESTIBULE STUDY ROOM
VESTIBULE BATH BATH VESTIBULE VESTIBULE BATH KITCHEN VESTIBULE S.P.D.
STAIRCASE 2
VESTIBULE KITCHEN SERVICE AREA
3
16.500 NOT FOR CONSTRUCTION

3000
2690

2690
MAIN CONSULTANT / ARCHITECT / INTERIOR DESIGNER
SERVICE AREA KITCHEN VESTIBULE
STAIRCASE 1
S.P.D. VESTIBULE KITCHEN KITCHEN VESTIBULE STUDY ROOM
VESTIBULE BATH BATH VESTIBULE VESTIBULE BATH KITCHEN VESTIBULE S.P.D.
STAIRCASE 2
VESTIBULE KITCHEN SERVICE AREA
2 STRUCURAL DESIGNER / MEP DESIGNER

13.500 HAO ARCHITECTURAL & ENGINEERING CONSULTANCY

3000
P.O. Box 25646, Dubai United Arab Emirates
2690

2690
T +9714-358 6660
F +9714-358 6663
E [email protected]
SERVICE AREA KITCHEN VESTIBULE
STAIRCASE 1
S.P.D. VESTIBULE KITCHEN KITCHEN VESTIBULE STUDY ROOM
VESTIBULE BATH BATH VESTIBULE VESTIBULE BATH KITCHEN VESTIBULE S.P.D.
STAIRCASE 2
VESTIBULE KITCHEN SERVICE AREA
1
CLIENT
10.500
MR. PESHRAW AGHA

3000

4500
LEVEL MEZZANINE 2

4190
S.P.D. S.P.D.
STAIRCASE 1 STAIRCASE 2
RETAIL05 7.500 PROJECT

1500
RETAIL05 RETAIL05 RETAIL05
S.P.D.
LEVEL MEZZANINE 1
6.000 EMPIRE SQUARE
PARCEL 5

3000
STAIRCASE 2
EMPIRE WORLD

5400
EXIT PASSAGE S.P.D. S.P.D.
LEVEL GROUND UPPER BLOCK 1

5090
STAIRCASE 1

3.000 DRAWING TITLE

1800 600 2400

RETAIL02 RETAIL04 RETAIL05 RETAIL06 LEVEL GROUND LOWER ARCHITECTURAL SECTION
0.600 ARCHITECTURAL SECTION -2
GATE LEVEL

9300
S.P.D. S.P.D.

4800
STAIRCASE 1 PMRS ROOM (LPG) LVSG ROOM STAIRCASE 2

0.000

2400
SCALE DATE ISSUED BY
LEVEL BASEMENT UPPER
-1.800
1 : 150 06/12/2019 MR

2100

2100
PROJECT NO. DRAWING NUMBER REVISION
S.P.D. SERVICES
BMS/CONTROL
ROOM/FCC WATER TANK WATER TANK PUMP ROOM S.P.D. STAIRCASE 2 LEVEL BASEMENT LOWER
STAIRCASE 1

-4.200 H201504 A-T1-302 R0

ISSUED FOR
LEVEL BASEMENT 2
-6.300 APPROVAL
ARCHITECTURE

SCHEMATIC DESIGN STAGE

© HAO 2019 PRINTED - 12/5/2019 3:43:37 PM
1.A 1.B 1.C 1.D 1.E 1.F 1.G 1.H 1.J

UPPER ROOF LEVEL

65.450 ARCHITECTS
ROOF LEVEL
GENERAL NOTES

2550

2550

2550
62.900 COPYRIGHT OF THIS DRG REMAINS WITH HAO ARCHITECTS AND MAY NOT BE
REPRODUCED WITHOUT PRIOR WRITTEN CONSENT.

600

600
LEVEL 18 DO NOT SCALE DRGS. DIMENSIONS ON THE DRGS GOVERN

1500 1500 1400

ALL DIMENSIONS ARE IN MILLIMETRES UNLESS NOTED OTHERWISE.
61.500

6950
ALL DIMENSIONS SHALL BE CHECKED / VERIFIED ON SITE BEFORE PROCEEDING
WITH THE WORK.

LIFT BASE ANY AREAS INDICATED ON THIS SHEET ARE APPROXIMATE AND INDICATIVE ONLY

4400

4400
4600

4600
CONTRACTOR SHALL NOTIFY IN WRITING OF ANY DISCREPANCIES 60 DAYS
BEFORE COMMENCEMENT OF WORK
60.000 ALL PROPOSED WORKS TO BE CARRIED OUT IN ACCORDANCE WITH HAO
ARCHITECTS DESIGN DRAWINGS, TECHNICAL SPECIFICATIONS AND SCHEDULES
FOR ARCHITECTURAL WORKS.
TERRACE LEVEL ALL SPECIALIST CONSULTANTS AS LISTED BELOW SHOULD CO-ORDINATE THEIR
DESIGNS IN ACCORDANCE WITH HAO ARCHITECTS DESIGN DRAWINGS.

58.500 - STRUCTURAL DESIGN.

- LIFE AND SAFETY

3000
- MEP SERVICES.

2650

2650
STORAGE/UTILITY STORAGE/UTILITY READ THIS DRAWING IN CONJUNCTION WITH ALL OTHER CONSULTANT'S AND
SPECIALIST'S DRAWINGS, DETAILS, SCHEDULES AND SPECIFICATIONS
LIVING AND DINING KITCHEN LOBBY KITCHEN LIVING AND DINING 16 FIT OUT CONTRACTOR MUST PREPARE FULL SHOP DRAWINGS AND MATERIALS
SUBMITTALS WITH SPECIFIC REFERENCE TO SITE CONDITIONS FOR H-AO
55.500 APPROVAL PRIOR TO MANUFACTURE INSTALLATION AND SHOULD BE CO-
ORDINATED WITH ALL CONSULTANTS INVOLVED.

3000
ALL CONSULTANTS, SPECIALISTS, SUPPLIERS, MANUFACTURERS, ETC. MUST

2690

2690
REFER TO GENERAL LAYOUT PLANS FOR ACTUAL LOCATIONS OF APARTMENTS.
STORAGE/UTILITY STORAGE/UTILITY
FIGURED DIMENSIONS ARE TO BE USED IN PREFERENCE TO SCALES. ALL
LIVING AND DINING KITCHEN LOBBY KITCHEN LIVING AND DINING 15 DIMENSIONS MUST BE CHECKED AGAINST SITE SIZES BEFORE COMMENCING
WORK.
DRAWING CONVEY THE DESIGN INTENT. CONTRACTOR TO PREPARE COORDINATED
52.500 SHOP DRAWINGS OF ALL DISCIPLINES BEFORE CONSTRUCTION ON SITE.
FIT OUT CONTRACTOR MUST APPLY FIRE RETARDANT LACQUER TO ALL

3000
2690

2690
MILLWORKS AND VENEERED PANELS WITH A PRODUCT WHICH IS COMPLIANT TO
STORAGE/UTILITY STORAGE/UTILITY ALL CIVIL DEFENSE REQUIREMENTS FOR SURFACE SPREAD OF FLAME.
CONTRACTOR MUST SUBMIT APPROVED CERTIFICATES ON COMPLETION OF THE
LIVING AND DINING KITCHEN LOBBY KITCHEN LIVING AND DINING 14 WORKS ON SITE.

49.500

3000
KEY PLAN

2690

2690
STORAGE/UTILITY STORAGE/UTILITY

LIVING AND DINING KITCHEN LOBBY KITCHEN LIVING AND DINING 13

46.500

3000
2690

2690
STORAGE/UTILITY STORAGE/UTILITY

LIVING AND DINING KITCHEN LOBBY KITCHEN LIVING AND DINING 12

43.500

3000
2690

2690
STORAGE/UTILITY STORAGE/UTILITY

LIVING AND DINING KITCHEN LOBBY KITCHEN LIVING AND DINING 11

40.500

3000
2690

2690
STORAGE/UTILITY STORAGE/UTILITY

LIVING AND DINING KITCHEN LOBBY KITCHEN LIVING AND DINING 10

37.500

3000
2690

2690
STORAGE/UTILITY STORAGE/UTILITY

48000
LIVING AND DINING KITCHEN LOBBY KITCHEN LIVING AND DINING

34.500

51000
3000
2690

2690
STORAGE / UTILITY

LIVING AND DINING KITCHEN LOBBY 8

55500
31.500

3000
2690

2690
BALCONY BEDROOM-01 BATH-01 STUDY ROOM LOBBY STUDY ROOM BATH-01 BEDROOM-01 BALCONY 7
28.500

3000
2690

2690
BALCONY BEDROOM-01 BATH-01 STUDY ROOM LOBBY STUDY ROOM BATH-01 BEDROOM-01 BALCONY 6
25.500

3000
2690

2690
BALCONY BEDROOM-01 BATH-01 STUDY ROOM LOBBY STUDY ROOM BATH-01 BEDROOM-01 BALCONY 5
22.500

3000
2690

2690

BALCONY BEDROOM-01 BATH-01 STUDY ROOM LOBBY STUDY ROOM BATH-01 BEDROOM-01 BALCONY 4
R0 06/12/2019 FOR APPROVAL CLIENT
19.500 NO. DATE DESCRIPTION ISSUED TO

3000
2690

2690

NOT FOR CONSTRUCTION

BALCONY BEDROOM-01 BATH-01 STUDY ROOM LOBBY STUDY ROOM BATH-01 BEDROOM-01 BALCONY 3
16.500 MAIN CONSULTANT / ARCHITECT / INTERIOR DESIGNER
STRUCURAL DESIGNER / MEP DESIGNER
3000
2690

2690

HAO ARCHITECTURAL & ENGINEERING CONSULTANCY

BALCONY BEDROOM-01 BATH-01 STUDY ROOM LOBBY STUDY ROOM BATH-01 BEDROOM-01 BALCONY 2 P.O. Box 25646, Dubai United Arab Emirates
T +9714-358 6660
F +9714-358 6663
13.500 E [email protected]
3000

CLIENT
2690

2690

BALCONY BEDROOM-01 BATH-01 STUDY ROOM LOBBY STUDY ROOM BATH-01 BEDROOM-01 BALCONY 1 MR. PESHRAW AGHA
10.500
3000
2690

PROJECT
4500
4190

BALCONY BEDROOM-01 BATH-01 STUDY ROOM LOBBY LEVEL MEZZANINE 2

EMPIRE SQUARE
1500

7.500
RETAIL05 PARCEL 5
EMPIRE WORLD
4500

LEVEL MEZZANINE 1
4190

BLOCK 1
3000

6.000
DRAWING TITLE
5400

ENT.LOBBY
LEVEL GROUND UPPER
5090

3.000 ARCHITECTURAL SECTION

1800 600 2400

RETAIL04
LEVEL GROUND LOWER
ARCHITECTURAL SECTION -3
4800

0.600
GATE LEVEL SCALE DATE ISSUED BY
9300
4800

WATER TANK 0.000 1 : 150 06/12/2019 MR

2400

LEVEL BASEMENT UPPER PROJECT NO. DRAWING NUMBER REVISION

4500

-1.800
H201504 A-T1-303 R0
2100

2100

LEVEL BASEMENT LOWER ISSUED FOR

-4.200
LEVEL BASEMENT 2
APPROVAL
-6.300 ARCHITECTURE

SCHEMATIC DESIGN STAGE

© HAO 2019 PRINTED - 12/5/2019 3:43:42 PM
1.1 1.2 1.3 1.4 1.5 1.6 1.7 1.8 1.9 1.10 1.11 1.12 1.13 1.14 1.15 1.16 1.17 1.18 1.19

55300

350 2200 3700 5800 3700 3700 3700 3700 1850 1850 3700 3700 3700 3700 3700 3700 2200 350 UPPER ROOF LEVEL
65.450
ARCHITECTS
ROOF LEVEL

2550

2550
62.900
GENERAL NOTES
LEVEL 18 COPYRIGHT OF THIS DRG REMAINS WITH HAO ARCHITECTS AND MAY NOT BE

1500 1500 1400

REPRODUCED WITHOUT PRIOR WRITTEN CONSENT.

6950
61.500 DO NOT SCALE DRGS. DIMENSIONS ON THE DRGS GOVERN
ALL DIMENSIONS ARE IN MILLIMETRES UNLESS NOTED OTHERWISE.
LIFT BASE ALL DIMENSIONS SHALL BE CHECKED / VERIFIED ON SITE BEFORE PROCEEDING

4400
L4 L3 L3 L3 L3 L3 L3 L3 L4 WITH THE WORK.
ANY AREAS INDICATED ON THIS SHEET ARE APPROXIMATE AND INDICATIVE ONLY
60.000 CONTRACTOR SHALL NOTIFY IN WRITING OF ANY DISCREPANCIES 60 DAYS
BEFORE COMMENCEMENT OF WORK
SERVICES LMR ROOM TERRACE LEVEL ALL PROPOSED WORKS TO BE CARRIED OUT IN ACCORDANCE WITH HAO
ARCHITECTS DESIGN DRAWINGS, TECHNICAL SPECIFICATIONS AND SCHEDULES
FOR ARCHITECTURAL WORKS.
58.500 ALL SPECIALIST CONSULTANTS AS LISTED BELOW SHOULD CO-ORDINATE THEIR
DESIGNS IN ACCORDANCE WITH HAO ARCHITECTS DESIGN DRAWINGS.

3000
2650

2650
- STRUCTURAL DESIGN.
- LIFE AND SAFETY
- MEP SERVICES.
SERVICE AREA LOBBY SERVICE AREA 16 READ THIS DRAWING IN CONJUNCTION WITH ALL OTHER CONSULTANT'S AND
SPECIALIST'S DRAWINGS, DETAILS, SCHEDULES AND SPECIFICATIONS
55.500 FIT OUT CONTRACTOR MUST PREPARE FULL SHOP DRAWINGS AND MATERIALS

3000
SUBMITTALS WITH SPECIFIC REFERENCE TO SITE CONDITIONS FOR H-AO
2690

2690
APPROVAL PRIOR TO MANUFACTURE INSTALLATION AND SHOULD BE CO-
ORDINATED WITH ALL CONSULTANTS INVOLVED.
ALL CONSULTANTS, SPECIALISTS, SUPPLIERS, MANUFACTURERS, ETC. MUST
SERVICE AREA LOBBY SERVICE AREA 15 REFER TO GENERAL LAYOUT PLANS FOR ACTUAL LOCATIONS OF APARTMENTS.
FIGURED DIMENSIONS ARE TO BE USED IN PREFERENCE TO SCALES. ALL
52.500 DIMENSIONS MUST BE CHECKED AGAINST SITE SIZES BEFORE COMMENCING
WORK.

3000
DRAWING CONVEY THE DESIGN INTENT. CONTRACTOR TO PREPARE COORDINATED
2690

2690
SHOP DRAWINGS OF ALL DISCIPLINES BEFORE CONSTRUCTION ON SITE.
FIT OUT CONTRACTOR MUST APPLY FIRE RETARDANT LACQUER TO ALL

SERVICE AREA LOBBY SERVICE AREA 14 MILLWORKS AND VENEERED PANELS WITH A PRODUCT WHICH IS COMPLIANT TO
ALL CIVIL DEFENSE REQUIREMENTS FOR SURFACE SPREAD OF FLAME.
CONTRACTOR MUST SUBMIT APPROVED CERTIFICATES ON COMPLETION OF THE
49.500 WORKS ON SITE.

3000
2690

2690
KEY PLAN
SERVICE AREA LOBBY SERVICE AREA 13
46.500

3000
2690

2690
SERVICE AREA LOBBY SERVICE AREA 12
43.500

3000
2690

2690
SERVICE AREA LOBBY SERVICE AREA 11
40.500

3000
2690

2690
SERVICE AREA LOBBY SERVICE AREA 10
37.500

3000
2690

2690
9

48000
SERVICE AREA LOBBY SERVICE AREA

34.500

3000
2690

2690
SERVICE AREA LOBBY SERVICE AREA 8

55500
31.500

3000
2690

2690
SERVICE AREA LOBBY SERVICE AREA 7
28.500

3000
2690

2690
SERVICE AREA LOBBY SERVICE AREA 6
25.500

3000
2690

2690
SERVICE AREA LOBBY SERVICE AREA 5
22.500

3000
2690

2690
SERVICE AREA LOBBY SERVICE AREA 4
19.500

3000
R0 06/12/2019 FOR APPROVAL CLIENT
2690

2690
NO. DATE DESCRIPTION ISSUED TO

SERVICE AREA LOBBY SERVICE AREA 3 NOT FOR CONSTRUCTION

16.500

3000
2690

2690
MAIN CONSULTANT / ARCHITECT / INTERIOR DESIGNER
STRUCURAL DESIGNER / MEP DESIGNER

SERVICE AREA LOBBY SERVICE AREA 2 HAO ARCHITECTURAL & ENGINEERING CONSULTANCY
13.500 P.O. Box 25646, Dubai United Arab Emirates
T +9714-358 6660

3000
F +9714-358 6663
2690

2690
E [email protected]

SERVICE AREA LOBBY SERVICE AREA 1 CLIENT

10.500 MR. PESHRAW AGHA

3000
2690

2690

4500
4190
SERVICE AREA LOBBY LEVEL MEZZANINE 2 PROJECT

1500
7.500
RETAIL05
EMPIRE SQUARE
4190

LEVEL MEZZANINE 1 PARCEL 5

4190

4190

3000

3000
6.000 EMPIRE WORLD

2690
SERVICES TRANSFORMER
BLOCK 1
EXIT PASSAGE ENT.LOBBY ROOM SERVICES RETAIL22 LEVEL GROUND UPPER
DRAWING TITLE
3.000

1800 600 2400

LEVEL GROUND LOWER ARCHITECTURAL SECTION

4800
4340

4340

PMRS ROOM (LPG)

4490

0.600
ARCHITECTURAL SECTION -4
LOBBY
GATE LEVEL

9300
LVSG ROOM ELE. CABINATE LOBBY
8990

0.000 SCALE DATE ISSUED BY

WATER TANK
2400
LEVEL BASEMENT UPPER
BMS/CONTROL
ROOM/FCC 4500 1 : 150 06/12/2019 MR
4050

4050
4200

-1.800 PROJECT NO. DRAWING NUMBER REVISION

2100

LOBBY

PUMP ROOM LOBBY

LEVEL BASEMENT LOWER H201504 A-T1-304 R0
-4.200 ISSUED FOR

LEVEL BASEMENT 2 APPROVAL

-6.300
ARCHITECTURE

SCHEMATIC DESIGN STAGE

© HAO 2019 PRINTED - 12/5/2019 3:43:46 PM
 1.1 1.2 1.3 1.4 1.5 1.6 1.7 1.8 1.9 1.10 1.11 1.12 1.13 1.14 1.15 1.16 1.17 1.18 1.19
ARCHITECTS

GENERAL NOTES
COPYRIGHT OF THIS DRG REMAINS WITH HAO ARCHITECTS AND MAY NOT BE
REPRODUCED WITHOUT PRIOR WRITTEN CONSENT.
DO NOT SCALE DRGS. DIMENSIONS ON THE DRGS GOVERN
ALL DIMENSIONS ARE IN MILLIMETRES UNLESS NOTED OTHERWISE.
ALL DIMENSIONS SHALL BE CHECKED / VERIFIED ON SITE BEFORE PROCEEDING
WITH THE WORK.
ANY AREAS INDICATED ON THIS SHEET ARE APPROXIMATE AND INDICATIVE ONLY
CONTRACTOR SHALL NOTIFY IN WRITING OF ANY DISCREPANCIES 60 DAYS
BEFORE COMMENCEMENT OF WORK
ALL PROPOSED WORKS TO BE CARRIED OUT IN ACCORDANCE WITH HAO
ARCHITECTS DESIGN DRAWINGS, TECHNICAL SPECIFICATIONS AND SCHEDULES
FOR ARCHITECTURAL WORKS.
ALL SPECIALIST CONSULTANTS AS LISTED BELOW SHOULD CO-ORDINATE THEIR
DESIGNS IN ACCORDANCE WITH HAO ARCHITECTS DESIGN DRAWINGS.
55300 - STRUCTURAL DESIGN.
- LIFE AND SAFETY
- MEP SERVICES.
350 2200 3700 5800 3700 3700 3700 3700 1850 1850 3700 3700 3700 3700 3700 3700 2200 350 READ THIS DRAWING IN CONJUNCTION WITH ALL OTHER CONSULTANT'S AND
SPECIALIST'S DRAWINGS, DETAILS, SCHEDULES AND SPECIFICATIONS
FIT OUT CONTRACTOR MUST PREPARE FULL SHOP DRAWINGS AND MATERIALS
SUBMITTALS WITH SPECIFIC REFERENCE TO SITE CONDITIONS FOR H-AO
1 APPROVAL PRIOR TO MANUFACTURE INSTALLATION AND SHOULD BE CO-
ORDINATED WITH ALL CONSULTANTS INVOLVED.
A-T1-301 1 ALL CONSULTANTS, SPECIALISTS, SUPPLIERS, MANUFACTURERS, ETC. MUST
REFER TO GENERAL LAYOUT PLANS FOR ACTUAL LOCATIONS OF APARTMENTS.
A-T1-303
FIGURED DIMENSIONS ARE TO BE USED IN PREFERENCE TO SCALES. ALL
DIMENSIONS MUST BE CHECKED AGAINST SITE SIZES BEFORE COMMENCING
WORK.
DRAWING CONVEY THE DESIGN INTENT. CONTRACTOR TO PREPARE COORDINATED
SHOP DRAWINGS OF ALL DISCIPLINES BEFORE CONSTRUCTION ON SITE.
FIT OUT CONTRACTOR MUST APPLY FIRE RETARDANT LACQUER TO ALL
MILLWORKS AND VENEERED PANELS WITH A PRODUCT WHICH IS COMPLIANT TO
ALL CIVIL DEFENSE REQUIREMENTS FOR SURFACE SPREAD OF FLAME.
CONTRACTOR MUST SUBMIT APPROVED CERTIFICATES ON COMPLETION OF THE

1.A 1.A
WORKS ON SITE.
1550

1550
KEY PLAN

1.B 1.B

C26
2.300
6250

6250
C12 C12
2.300 2.300
C26

C12 C26 C26 C26 2.300

C12
2.300 2.300 C26 C12 2.300 C26 C12 2.300 C12 2.300 C26 C26
C26 C12 C12
C12 2.300 2.300 C12 2.300 2.300 2.300 2.300 2.300
2.300 2.300 2.300 C09 C09
2.300 2.300

1.C 1.C
2.300 2.300

C09 C12 C09

C26 C12 C26 C12
3050

3050
2.300 2.300 C12 C26 2.300
2.300 2.300 2.300 2.300
2.300

1.D 1.D
C26 2.300
C26
C26 2.300 C26 C26 C26
C26 2.300
2.300 2.300 2.300 2.300
2.300
900

900 900
23500

23500
1
A-T1-304 1.E C12
2.300 1.E
900

C26 C26 C26

C26 C26
2.300 2.300 2.300

1.F 1.F
2.300 C26 2.300
C26
3050

3050
2.300
2.300 C26
C09 C12 C26 C12 C26 C12 C09
1 2.300 C12
2.300 2.300 2.300 2.300 2.300 2.300 2.300
C26 C26 2.300
A-T1-302
2.300 2.300

1.G C09 C09

1.G
C12 C12
C26 C12 C12 2.300 2.300
2.300 C26 C12 C12 C26 C12 2.300
2.300 2.300 2.300 C26 C26
2.300 2.300 2.300 2.300 2.300
C12 C26 C12 C26 2.300 2.300
2.300 2.300 2.300 2.300

C12 C12
2.300 2.300
6250

6250
C26
R0 06/12/2019 FOR APPROVAL CLIENT
2.300 NO. DATE DESCRIPTION ISSUED TO

NOT FOR CONSTRUCTION

1.H 1.H
1550

1550
MAIN CONSULTANT / ARCHITECT / INTERIOR DESIGNER
STRUCURAL DESIGNER / MEP DESIGNER

1.J 1.J HAO ARCHITECTURAL & ENGINEERING CONSULTANCY

P.O. Box 25646, Dubai United Arab Emirates
T +9714-358 6660
F +9714-358 6663
E [email protected]

CLIENT

MR. PESHRAW AGHA

PROJECT
350 2200 3700 5800 3700 3700 3700 3700 1850 1850 3700 3700 3700 3700 3700 3700 2200 350
EMPIRE SQUARE
55300 PARCEL 5
EMPIRE WORLD
BLOCK 1
DRAWING TITLE

REFLECTED CEILING LAYOUT

TYPICAL FLOOR PLAN - 03
1.1 1.2 1.3 1.4 1.5 1.6 1.7 1.8 1.9 1.10 1.11 1.12 1.13 1.14 1.15 1.16 1.17 1.18 1.19 LEVEL 9 - LEVEL 16
RESIDENTIAL FLOOR PLAN
SCALE DATE ISSUED BY
CEILING SCHEDULE
1 : 100 06/12/2019 MR
Type Description PROJECT NO. DRAWING NUMBER REVISION

C09 - MR Gypsum Tiles False Ceiling - H201504 A-T1-704 R0

2 Fine Line ISSUED FOR

C12 Gypsum Board False Ceiling APPROVAL

C26 12.5mm thk Moisture Resistant ARCHITECTURE

Gypsum Board Ceiling SCHEMATIC DESIGN STAGE

© HAO 2019 PRINTED - 05-Dec-19 9:50:27 PM
 1.1 1.2 1.3 1.4 1.5 1.6 1.7 1.8 1.9 1.10 1.11 1.12 1.13 1.14 1.15 1.16 1.17 1.18 1.19
ARCHITECTS

GENERAL NOTES
COPYRIGHT OF THIS DRG REMAINS WITH HAO ARCHITECTS AND MAY NOT BE
REPRODUCED WITHOUT PRIOR WRITTEN CONSENT.
DO NOT SCALE DRGS. DIMENSIONS ON THE DRGS GOVERN
ALL DIMENSIONS ARE IN MILLIMETRES UNLESS NOTED OTHERWISE.
ALL DIMENSIONS SHALL BE CHECKED / VERIFIED ON SITE BEFORE PROCEEDING
WITH THE WORK.
ANY AREAS INDICATED ON THIS SHEET ARE APPROXIMATE AND INDICATIVE ONLY
CONTRACTOR SHALL NOTIFY IN WRITING OF ANY DISCREPANCIES 60 DAYS
BEFORE COMMENCEMENT OF WORK
ALL PROPOSED WORKS TO BE CARRIED OUT IN ACCORDANCE WITH HAO
ARCHITECTS DESIGN DRAWINGS, TECHNICAL SPECIFICATIONS AND SCHEDULES
FOR ARCHITECTURAL WORKS.
ALL SPECIALIST CONSULTANTS AS LISTED BELOW SHOULD CO-ORDINATE THEIR
DESIGNS IN ACCORDANCE WITH HAO ARCHITECTS DESIGN DRAWINGS.
55300 - STRUCTURAL DESIGN.
- LIFE AND SAFETY
- MEP SERVICES.
350 2200 3700 5800 3700 3700 3700 3700 1850 1850 3700 3700 3700 3700 3700 3700 2200 350 READ THIS DRAWING IN CONJUNCTION WITH ALL OTHER CONSULTANT'S AND
SPECIALIST'S DRAWINGS, DETAILS, SCHEDULES AND SPECIFICATIONS
FIT OUT CONTRACTOR MUST PREPARE FULL SHOP DRAWINGS AND MATERIALS
SUBMITTALS WITH SPECIFIC REFERENCE TO SITE CONDITIONS FOR H-AO
1 APPROVAL PRIOR TO MANUFACTURE INSTALLATION AND SHOULD BE CO-
ORDINATED WITH ALL CONSULTANTS INVOLVED.
A-T1-301 1 ALL CONSULTANTS, SPECIALISTS, SUPPLIERS, MANUFACTURERS, ETC. MUST
REFER TO GENERAL LAYOUT PLANS FOR ACTUAL LOCATIONS OF APARTMENTS.
A-T1-303
FIGURED DIMENSIONS ARE TO BE USED IN PREFERENCE TO SCALES. ALL
DIMENSIONS MUST BE CHECKED AGAINST SITE SIZES BEFORE COMMENCING
WORK.
DRAWING CONVEY THE DESIGN INTENT. CONTRACTOR TO PREPARE COORDINATED
SHOP DRAWINGS OF ALL DISCIPLINES BEFORE CONSTRUCTION ON SITE.
FIT OUT CONTRACTOR MUST APPLY FIRE RETARDANT LACQUER TO ALL
MILLWORKS AND VENEERED PANELS WITH A PRODUCT WHICH IS COMPLIANT TO
ALL CIVIL DEFENSE REQUIREMENTS FOR SURFACE SPREAD OF FLAME.
CONTRACTOR MUST SUBMIT APPROVED CERTIFICATES ON COMPLETION OF THE

1.A 1.A
WORKS ON SITE.
1550

1550
KEY PLAN

1.B 1.B
C26
2.300
6250

6250
C12 C12

2.300 2.300
C12 C26
2.300 2.300
C12 C26
C26 C26
2.300 2.300 C26 C26
C26 C26
C26 C12 C12 2.300 2.300
C12 2.300 2.300
C12 C12 2.300 2.300
2.300 2.300 2.300
2.300 C09 2.300 C09 2.300
1.C 2.300 2.300 1.C
C09 C12 C09
C26 C12 C12 C26 C12 C12 C26 C12
3050

3050
2.300 2.300 2.300
2.300 2.300 2.300 2.300 2.300 2.300 2.300 2.300

C26 C12 C26

1.D 1.D
C12 C26
C26 C26
2.300 2.300 2.300 2.300
2.300 2.300 2.300
900

900 900
23500

23500
1
A-T1-304 1.E C12
2.300 1.E
900

C26
1.F 1.F
C26 C26
C26 C26
2.300 2.300 2.300
2.300 C12 C12 2.300
3050

3050
2.350 2.300
C26 C12 C26 C12 C12 C26
C09 C12 C12 C09
1 2.300 2.300
2.300 2.350 2.300 2.300 2.300 2.300 2.300 2.300
A-T1-302

1.G C09
2.350
C09
2.300
1.G
C12 C12
C26 C12 C12
C12 C26 C12 C26 2.300 C26 C26 2.300
2.300 2.300 2.300 C26 C26
C12 C26 2.300 2.350 2.350 2.350 2.300 2.300 2.300 2.300
2.300 2.300 C12 C26
2.300 2.300
C12 C12
2.300 2.300
6250

6250
C26 R0 06/12/2019 FOR APPROVAL CLIENT
2.300 NO. DATE DESCRIPTION ISSUED TO

NOT FOR CONSTRUCTION

1.H 1.H
1550

1550
MAIN CONSULTANT / ARCHITECT / INTERIOR DESIGNER
STRUCURAL DESIGNER / MEP DESIGNER

1.J 1.J HAO ARCHITECTURAL & ENGINEERING CONSULTANCY

P.O. Box 25646, Dubai United Arab Emirates
T +9714-358 6660
F +9714-358 6663
E [email protected]

CLIENT

MR. PESHRAW AGHA

PROJECT
350 2200 3700 5800 3700 3700 3700 3700 1850 1850 3700 3700 3700 3700 3700 3700 2200 350
EMPIRE SQUARE
55300 PARCEL 5
EMPIRE WORLD
BLOCK 1
DRAWING TITLE

REFLECTED CEILING LAYOUT

TYPICAL FLOOR PLAN - 02
1.1 1.2 1.3 1.4 1.5 1.6 1.7 1.8 1.9 1.10 1.11 1.12 1.13 1.14 1.15 1.16 1.17 1.18 1.19 LEVEL 8
RESIDENTIAL FLOOR PLAN
SCALE DATE ISSUED BY
CEILING SCHEDULE
1 : 100 06/12/2019 MR
Type Description PROJECT NO. DRAWING NUMBER REVISION

C09 - MR Gypsum Tiles False Ceiling - H201504 A-T1-703 R0

2 Fine Line ISSUED FOR

C12 Gypsum Board False Ceiling APPROVAL

C26 12.5mm thk Moisture Resistant ARCHITECTURE

Gypsum Board Ceiling SCHEMATIC DESIGN STAGE

© HAO 2019 PRINTED - 05-Dec-19 9:50:22 PM
 1.1 1.2 1.3 1.4 1.5 1.6 1.7 1.8 1.9 1.10 1.11 1.12 1.13 1.14 1.15 1.16 1.17 1.18 1.19
ARCHITECTS

GENERAL NOTES
COPYRIGHT OF THIS DRG REMAINS WITH HAO ARCHITECTS AND MAY NOT BE
REPRODUCED WITHOUT PRIOR WRITTEN CONSENT.
DO NOT SCALE DRGS. DIMENSIONS ON THE DRGS GOVERN
ALL DIMENSIONS ARE IN MILLIMETRES UNLESS NOTED OTHERWISE.
ALL DIMENSIONS SHALL BE CHECKED / VERIFIED ON SITE BEFORE PROCEEDING
WITH THE WORK.
ANY AREAS INDICATED ON THIS SHEET ARE APPROXIMATE AND INDICATIVE ONLY
CONTRACTOR SHALL NOTIFY IN WRITING OF ANY DISCREPANCIES 60 DAYS
BEFORE COMMENCEMENT OF WORK
ALL PROPOSED WORKS TO BE CARRIED OUT IN ACCORDANCE WITH HAO
ARCHITECTS DESIGN DRAWINGS, TECHNICAL SPECIFICATIONS AND SCHEDULES
FOR ARCHITECTURAL WORKS.
ALL SPECIALIST CONSULTANTS AS LISTED BELOW SHOULD CO-ORDINATE THEIR
DESIGNS IN ACCORDANCE WITH HAO ARCHITECTS DESIGN DRAWINGS.
55300 - STRUCTURAL DESIGN.
- LIFE AND SAFETY
- MEP SERVICES.
350 2200 3700 5800 3700 3700 3700 3700 1850 1850 3700 3700 3700 3700 3700 3700 2200 350 READ THIS DRAWING IN CONJUNCTION WITH ALL OTHER CONSULTANT'S AND
SPECIALIST'S DRAWINGS, DETAILS, SCHEDULES AND SPECIFICATIONS
FIT OUT CONTRACTOR MUST PREPARE FULL SHOP DRAWINGS AND MATERIALS
SUBMITTALS WITH SPECIFIC REFERENCE TO SITE CONDITIONS FOR H-AO
1 1 APPROVAL PRIOR TO MANUFACTURE INSTALLATION AND SHOULD BE CO-
ORDINATED WITH ALL CONSULTANTS INVOLVED.
A-T1-301 A-T1-303 ALL CONSULTANTS, SPECIALISTS, SUPPLIERS, MANUFACTURERS, ETC. MUST
REFER TO GENERAL LAYOUT PLANS FOR ACTUAL LOCATIONS OF APARTMENTS.
FIGURED DIMENSIONS ARE TO BE USED IN PREFERENCE TO SCALES. ALL
DIMENSIONS MUST BE CHECKED AGAINST SITE SIZES BEFORE COMMENCING
WORK.
DRAWING CONVEY THE DESIGN INTENT. CONTRACTOR TO PREPARE COORDINATED
SHOP DRAWINGS OF ALL DISCIPLINES BEFORE CONSTRUCTION ON SITE.
FIT OUT CONTRACTOR MUST APPLY FIRE RETARDANT LACQUER TO ALL
MILLWORKS AND VENEERED PANELS WITH A PRODUCT WHICH IS COMPLIANT TO
ALL CIVIL DEFENSE REQUIREMENTS FOR SURFACE SPREAD OF FLAME.
CONTRACTOR MUST SUBMIT APPROVED CERTIFICATES ON COMPLETION OF THE

1.A 1.A
WORKS ON SITE.
1550

1550
KEY PLAN

1.B 1.B
C26
2.300
6250

6250
C12
2.300

C26 C26 C26 C26

C26 C12 C12 C26 C26 C12
2.300 2.300 C12 C26 C12 2.300 2.300
2.300 2.300 C12 C12 2.300 2.300 2.300 2.300
C26
2.300 2.300 2.300
2.300 C09 C09 2.300 2.300 C09
C09

1.C 1.C
2.300 2.300 2.300 2.300

C09
C12 C26 C26 C26
3050

3050
2.300
2.300 2.300 2.300 2.300

C26 C26 C26 C26

1.D C26
2.300
2.300 2.300 C26 C26 C26 2.300 2.300 1.D
2.300 2.300 2.300
900

900 900
23500

23500
1
A-T1-304 1.E C12
2.300 1.E
900

C26 C26 C26

C26
1.F 2.300
C26
2.300
C26
2.300
2.300 2.300 2.300
C26
C26
2.300
1.F
3050

3050
2.300
C09 C12 C12 C26 C26 C26
1 2.300 2.300 2.300 2.300 2.300
2.300
C26
A-T1-302
2.300

1.G C09 C09 C09 C09 1.G

C26 2.300 2.300 2.300 2.300
C12 C12 C26 C12 C12 C12
2.300 C26 C12 C26 C26 C12
2.300 2.300 2.300 2.300 2.300 2.300
C26 C26 C26
2.300 2.300 2.300 2.300 2.300
2.300 2.300 2.300

C12
2.300
6250

6250
C26 R0 06/12/2019 FOR APPROVAL CLIENT
2.300 NO. DATE DESCRIPTION ISSUED TO

NOT FOR CONSTRUCTION

1.H 1.H
1550

1550
MAIN CONSULTANT / ARCHITECT / INTERIOR DESIGNER
STRUCURAL DESIGNER / MEP DESIGNER

1.J 1.J HAO ARCHITECTURAL & ENGINEERING CONSULTANCY

P.O. Box 25646, Dubai United Arab Emirates
T +9714-358 6660
F +9714-358 6663
E [email protected]

CLIENT

MR. PESHRAW AGHA

PROJECT
350 2200 3700 5800 3700 3700 3700 3700 1850 1850 3700 3700 3700 3700 3700 3700 2200 350
EMPIRE SQUARE
55300 PARCEL 5
EMPIRE WORLD
BLOCK 1
DRAWING TITLE

REFLECTED CEILING LAYOUT

TYPICAL FLOOR PLAN - 01
1.1 1.2 1.3 1.4 1.5 1.6 1.7 1.8 1.9 1.10 1.11 1.12 1.13 1.14 1.15 1.16 1.17 1.18 1.19 LEVEL 1 - LEVEL 7
RESIDENTIAL FLOOR PLAN
SCALE DATE ISSUED BY
CEILING SCHEDULE
1 : 100 06/12/2019 MR
Type Description PROJECT NO. DRAWING NUMBER REVISION

C09 - MR Gypsum Tiles False Ceiling - H201504 A-T1-702 R0

2 Fine Line ISSUED FOR

C12 Gypsum Board False Ceiling APPROVAL

C26 12.5mm thk Moisture Resistant ARCHITECTURE

Gypsum Board Ceiling SCHEMATIC DESIGN STAGE

© HAO 2019 PRINTED - 05-Dec-19 9:46:42 PM
 1.1 1.2 1.3 1.4 1.5 1.6 1.7 1.8 1.9 1.10 1.11 1.12 1.13 1.14 1.15 1.16 1.17 1.18 1.19
ARCHITECTS

GENERAL NOTES
COPYRIGHT OF THIS DRG REMAINS WITH HAO ARCHITECTS AND MAY NOT BE
REPRODUCED WITHOUT PRIOR WRITTEN CONSENT.
DO NOT SCALE DRGS. DIMENSIONS ON THE DRGS GOVERN
ALL DIMENSIONS ARE IN MILLIMETRES UNLESS NOTED OTHERWISE.
ALL DIMENSIONS SHALL BE CHECKED / VERIFIED ON SITE BEFORE PROCEEDING
WITH THE WORK.
ANY AREAS INDICATED ON THIS SHEET ARE APPROXIMATE AND INDICATIVE ONLY
CONTRACTOR SHALL NOTIFY IN WRITING OF ANY DISCREPANCIES 60 DAYS
BEFORE COMMENCEMENT OF WORK
ALL PROPOSED WORKS TO BE CARRIED OUT IN ACCORDANCE WITH HAO
ARCHITECTS DESIGN DRAWINGS, TECHNICAL SPECIFICATIONS AND SCHEDULES
FOR ARCHITECTURAL WORKS.
ALL SPECIALIST CONSULTANTS AS LISTED BELOW SHOULD CO-ORDINATE THEIR
DESIGNS IN ACCORDANCE WITH HAO ARCHITECTS DESIGN DRAWINGS.
55300 - STRUCTURAL DESIGN.
- LIFE AND SAFETY
- MEP SERVICES.
350 2200 3700 5800 3700 3700 3700 3700 1850 1850 3700 3700 3700 3700 3700 3700 2200 350 READ THIS DRAWING IN CONJUNCTION WITH ALL OTHER CONSULTANT'S AND
SPECIALIST'S DRAWINGS, DETAILS, SCHEDULES AND SPECIFICATIONS
FIT OUT CONTRACTOR MUST PREPARE FULL SHOP DRAWINGS AND MATERIALS
SUBMITTALS WITH SPECIFIC REFERENCE TO SITE CONDITIONS FOR H-AO
1 1 APPROVAL PRIOR TO MANUFACTURE INSTALLATION AND SHOULD BE CO-
ORDINATED WITH ALL CONSULTANTS INVOLVED.
A-T1-301 A-T1-303 ALL CONSULTANTS, SPECIALISTS, SUPPLIERS, MANUFACTURERS, ETC. MUST
REFER TO GENERAL LAYOUT PLANS FOR ACTUAL LOCATIONS OF APARTMENTS.
FIGURED DIMENSIONS ARE TO BE USED IN PREFERENCE TO SCALES. ALL
DIMENSIONS MUST BE CHECKED AGAINST SITE SIZES BEFORE COMMENCING
WORK.
DRAWING CONVEY THE DESIGN INTENT. CONTRACTOR TO PREPARE COORDINATED
SHOP DRAWINGS OF ALL DISCIPLINES BEFORE CONSTRUCTION ON SITE.
FIT OUT CONTRACTOR MUST APPLY FIRE RETARDANT LACQUER TO ALL
MILLWORKS AND VENEERED PANELS WITH A PRODUCT WHICH IS COMPLIANT TO
ALL CIVIL DEFENSE REQUIREMENTS FOR SURFACE SPREAD OF FLAME.
CONTRACTOR MUST SUBMIT APPROVED CERTIFICATES ON COMPLETION OF THE

1.A 1.A
WORKS ON SITE.
1550

1550
KEY PLAN

1.B 1.B

C26
2.300
6250

6250
C12
2.300

C26 C26 C26

C26 C12 C12 C26 C12 C26
2.300 2.300 2.300
C26 2.300 2.300 2.300 2.300 2.300 2.300
C12 C12 C12
2.300 C09 C09 C09
2.300 2.300 2.300

1.C 1.C
2.300 2.300 2.300

C09
C12 C26 C26 C26
3050

3050
2.300 C12
2.300 2.300 2.300 2.300
2.300
C26 C26 C26

1.D C26
2.300
2.300 2.300 C26
2.300
C26
2.300
C26
2.300
2.300
1.D
900

900 900
23500

23500
1
A-T1-304 1.E C12
2.300 1.E
900

1.F 1.F
3050

3050
1
A-T1-302

1.G 1.G
6250

6250
R0 06/12/2019 FOR APPROVAL CLIENT
NO. DATE DESCRIPTION ISSUED TO

NOT FOR CONSTRUCTION

1.H 1.H
1550

1550
MAIN CONSULTANT / ARCHITECT / INTERIOR DESIGNER
STRUCURAL DESIGNER / MEP DESIGNER

1.J 1.J HAO ARCHITECTURAL & ENGINEERING CONSULTANCY

P.O. Box 25646, Dubai United Arab Emirates
T +9714-358 6660
F +9714-358 6663
E [email protected]

CLIENT

MR. PESHRAW AGHA

PROJECT
350 2200 3700 5800 3700 3700 3700 3700 1850 1850 3700 3700 3700 3700 3700 3700 2200 350
EMPIRE SQUARE
55300 PARCEL 5
EMPIRE WORLD
BLOCK 1
DRAWING TITLE

REFLECTED CEILING LAYOUT

TYPICAL FLOOR PLAN - 01A
1.1 1.2 1.3 1.4 1.5 1.6 1.7 1.8 1.9 1.10 1.11 1.12 1.13 1.14 1.15 1.16 1.17 1.18 1.19 LEVEL MEZZANINE
RESIDENTIAL FLOOR PLAN
SCALE DATE ISSUED BY
CEILING SCHEDULE
1 : 100 06/12/2019 MR
Type Description PROJECT NO. DRAWING NUMBER REVISION

C09 - MR Gypsum Tiles False Ceiling - H201504 A-T1-701 R0

2 Fine Line ISSUED FOR

C12 Gypsum Board False Ceiling APPROVAL

C26 12.5mm thk Moisture Resistant ARCHITECTURE

Gypsum Board Ceiling SCHEMATIC DESIGN STAGE

© HAO 2019 PRINTED - 05-Dec-19 9:46:39 PM