Scribd
Upload
72 views4 pages

6ES73317PF010AB0 Datasheet en

6es7331 7pf01

Uploaded by

daywalkery
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
72 views4 pages

6ES73317PF010AB0 Datasheet en

6es7331 7pf01

Uploaded by

daywalkery
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 4

Data sheet 6ES7331-7PF01-0AB0

SIMATIC S7-300, Analog input SM 331, isolated, 2/3/4-wire, 8 AI,


Resistor, Pt100/200/1000 NI100/120/200/500/1000, CU10,
characteristics according to GOST 16 (internal 24) bit, 50ms, 1x 40-
pole

Supply voltage
Load voltage L+
● Rated value (DC) 24 V
● Reverse polarity protection Yes

Input current
from load voltage L+ (without load), max. 240 mA
from backplane bus 5 V DC, max. 100 mA

Power loss
Power loss, typ. 4.6 W

Analog inputs
Number of analog inputs 8
● For resistance measurement 8
permissible input voltage for voltage input 75 V; 35 V continuous, 75 V for max. 1 s (mark to space ratio
(destruction limit), max. 1:20)
Input ranges
● Voltage No

6ES7331-7PF01-0AB0 Subject to change without notice


Page 1/4 12/13/2019 © Copyright Siemens
● Current No
● Thermocouple No
● Resistance thermometer Yes
● Resistance Yes
Input ranges (rated values), voltages
● 0 to +10 V No
● 1 V to 5 V No
● 1 V to 10 V No
● -1 V to +1 V No
● -10 V to +10 V No
● -2.5 V to +2.5 V No
● -250 mV to +250 mV No
● -5 V to +5 V No
● -50 mV to +50 mV No
● -500 mV to +500 mV No
● -80 mV to +80 mV No
Input ranges (rated values), currents
● 0 to 20 mA No
● -10 mA to +10 mA No
● -20 mA to +20 mA No
● -3.2 mA to +3.2 mA No
● 4 mA to 20 mA No
Input ranges (rated values), thermocouples
● Type B No
● Type C No
● Type E No
● Type J No
● Type K No
● Type L No
● Type N No
● Type R No
● Type S No
● Type T No
● Type U No
● Type TXK/TXK(L) to GOST No
Input ranges (rated values), resistance thermometer
● Cu 10 Yes
● Ni 100 Yes
● Ni 1000 Yes
● LG-Ni 1000 Yes
● Ni 120 Yes

6ES7331-7PF01-0AB0 Subject to change without notice


Page 2/4 12/13/2019 © Copyright Siemens
● Ni 200 Yes
● Ni 500 Yes
● Pt 100 Yes
● Pt 1000 Yes
● Pt 200 Yes
● Pt 500 Yes
Input ranges (rated values), resistors
● 0 to 150 ohms Yes
● 0 to 300 ohms Yes
● 0 to 600 ohms Yes
Characteristic linearization
● parameterizable Yes
Cable length
● shielded, max. 200 m

Analog value generation for the inputs


Integration and conversion time/resolution per channel
● Resolution with overrange (bit including sign), 16 bit; Two's complement
max.
● Integration time, parameterizable Yes
● Basic conversion time (ms) up to 4 channels: 10 ms per module, over 5 channels: 190 ms per
module, 8 channels: 80 ms
● Interference voltage suppression for 400 / 60 / 50 Hz
interference frequency f1 in Hz

Encoder
Connection of signal encoders
● for resistance measurement with two-wire Yes; without resistance correction
connection
● for resistance measurement with three-wire Yes
connection
● for resistance measurement with four-wire Yes
connection

Errors/accuracies
Operational error limit in overall temperature range
● Resistance, relative to input range, (+/-) 0.1 %
● Resistance thermometer, relative to input ±1 K
range, (+/-)
Basic error limit (operational limit at 25 °C)
● Resistance, relative to input range, (+/-) 0.05 %
● Resistance thermometer, relative to input ±0.5 K
range, (+/-)

Interrupts/diagnostics/status information
Diagnostics function Yes; Parameterizable

6ES7331-7PF01-0AB0 Subject to change without notice


Page 3/4 12/13/2019 © Copyright Siemens
Alarms
● Diagnostic alarm Yes; Parameterizable per group
● Limit value alarm Yes; Parameterizable
● Hardware interrupt Yes; Parameterizable, channels 0 to 7
Diagnostic messages
● Diagnostic information readable Yes
Diagnostics indication LED
● Group error SF (red) Yes

Potential separation
Potential separation analog inputs
● between the channels Yes
● between the channels, in groups of 2
● between the channels and backplane bus Yes
● between the channels and the power supply of Yes
the electronics

Isolation
Isolation tested with 500 V DC

Connection method
required front connector 40-pin

Dimensions
Width 40 mm
Height 125 mm
Depth 120 mm

Weights
Weight, approx. 272 g

last modified: 12/10/2019

6ES7331-7PF01-0AB0 Subject to change without notice


Page 4/4 12/13/2019 © Copyright Siemens

You might also like