0% found this document useful (0 votes)
231 views2 pages

Iron Oxide Red S130M

Red pigment-High Performance micronised
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
231 views2 pages

Iron Oxide Red S130M

Red pigment-High Performance micronised
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

TECHNICAL DATA SHEET

YIPIN® Iron Oxide Pigment


Iron Oxide Red S130M

Edition of 2007-08-10
Type Red pigment-High Performance micronised
Delivery Form Powder
Chemical Class Synthetic iron oxide alpha-Fe2O3
Color Index Pigment red 101(77491)
CAS No. 1309-37-1
Use Recommendation

COLOR VALUES AND TINTING STRENGTH


Reference Standard:
Min Max Test Method
Test Paste Based Similar To Wet System As Per
Binder ® 40
On Sacolyd L640 DIN 55983 (1983)
Full Shade No.001, 1995-04-2841
△L* -0.4 0.4
△a* -0.8 0.8
△b* -0.9 0.9
△E*ab 1.0
Reduction with titanium dioxide (1:5) TRONOX®R-KB-2 No.001, 1995-04-2841
△L* -0.5 0.5
△a* -0.5 0.5
△b* -0.5 0.5
△E*ab 0.8
Binder Barytes
Relative tinting strength [%] 97 103 No.003, 1994-03-1141

TECHNICAL DATA
Min Max Test Method
Hegman Grind 6.0 ISO-1524-2000
Dispersion (micron)[µm] 25 ISO-1524-2000
Water-Soluble Content [%] 0.5 DIN EN ISO787 Part 3 (1995)
Sieve Residue(0.045mm)[%] 0.005 DIN EN ISO787 Part 2 (1995)
PH Value 5 7 DIN EN ISO787 Part 9 (1995)
Fe2O3 [%] 96 DIN 55913 Sheet 2 (1972)
SiO2+Al2O3 Content [%] 3 DIN 55913
Moisture (After Production) [%] 0.5 DIN EN ISO 787 Part 2 (1995)
Loss on Heating 1000℃1/2h [%] 0.7 DIN EN ISO 55913
Particle Shape Spherical Electron Micrographs

YIPIN PIGMENTS, INC. Tel:+1-909-243-7394 Fax:+1-909-243-7397 www.yipin.com


一品颜料 Tel:+86-21-5950 8509 Fax:+86-21-5950 7893 [email protected]

1 of 2 3/18/2009 Copyright Shanghai Yipin Pigments Co., Ltd


TECHNICAL DATA SHEET
YIPIN® Iron Oxide Pigment
Iron Oxide Red S130M

Approx.
Predominant Particle size [µM] 0.17 Electron Micrographs
Water Absorption [g/100g] 20 DIN EN ISO787 Part 5 (1995)
Tamped Density [g/ml] 1.0 DIN EN ISO 787 Part 11 (1995)
Density [g/ml] 5.0 DIN EN ISO787 Part 10 (1995)

STANDARD PACKAGING 25kg/bag 1000kg /bulk bag

TRANSPORT AND STORAGE


Protect against weathering. Store in a dry place and avoid extreme fluctuations in
temperature. Special conditions for opened packaging: Close bags after use to prevent
the absorption of moisture and contamination.

SAFETY
The product is not classified as dangerous under the relevant EC directives and
corresponding national regulations valid in the individual EU member states. It is not
dangerous according to transport regulations. In countries outside the EU, compliance
with the respective national legislation concerning the classification, packaging, labeling
and transport of dangerous substances must be ensured.
The information contained in the safety data sheet should be observed.
This contains information on handing, product safety and ecology.

This information is given in good faith, without warranty. It is also applies where
proprietary rights of third parties are involved. Our advice does not release you from the obligation to
verify the information currently provided and to test our products as to their suitability for the intended
processes and uses. The application, use and processing of our products and the products manufactured
by you on the basis of our technical advice are beyond our control and, therefore, entirely your own
responsibility. Our products are sold in accordance with the current version of our General conditions of
sale and delivery.

YIPIN PIGMENTS, INC. Tel:+1-909-243-7394 Fax:+1-909-243-7397 www.yipin.com


一品颜料 Tel:+86-21-5950 8509 Fax:+86-21-5950 7893 [email protected]

2 of 2 3/18/2009 Copyright Shanghai Yipin Pigments Co., Ltd

You might also like