SMC Dialog Plus conversion to another

SMC Product
Why the conversion?
While the SMC-Dialog Plus has been a solid performer throughout the years, it is no longer viable to sustain
this product. Moving forward, and using the vast advances in the SMC family, a conversion from the SMC-
Dialog Plus to another SMC product is easy to do. The current portfolio offers purely solid state with the
SMC-50 and hybrids, such as the SMC-Flex and the SMC-3 which has integrated bypass. This document will
provide some functional, dimensional, and side-by-side comparisons.

Functional Comparison
Both the SMC-Dialog Plus and the SMC-50 are fully solid state which is and has been a perfect fit for
dusty, dirty and environments with or without vibration. Rock crushers and similar applications where
current spikes could cause issues with integral bypass contactors dropping out is avoided. External
bypass can be added if the application warrants it. Unlike the SMC-Dialog Plus, the SMC-50 is fully
versatile in programming, control and expansion I/O, which means fully customizable to suit the
customers’ needs. The additional features of the SMC-50, such as linear accel and decel, analog input
and output, DeviceLogix, will provide options that was not available with the SMC-Dialog Plus.

If an application would be best served with an integral bypass, then a SMC-3 or a SMC-Flex would be the
choice. The SMC-3 will be a low cost, dip switch controlled SMC for just enough control. The SMC-Flex
would be similar to the SMC-Dialog Plus, but with much more capabilities.

It is recommended that our SMC Wizard Selection Tools be used to verify proper SMC sizing for application.
(Reference http://ab.rockwellautomation.com/Motor-Control/Soft-Starters/SMC-50#resources) The tools
include the SMC Estimation Wizard and SMC Thermal Wizard are available.

The Thermal Wizard is used to assist in determining if the SMC selected can thermally handle the starting
of the motor, meaning the SCR heating. A proper evaluation will be provided based on the parameters
accurately entered.
The Estimation Wizard should be used for applications with starting times beyond 30 seconds or
applications needing closer scrutiny such as high inertia loads. Different motor characteristics are entered
into this tool to provide an estimation if the SMC will work in a certain application. The tool is as accurate
as the information provided from the user.

SCANport vs DPI port.

The SMC-Dialog Plus utilized SCANport devices while the SMC-Flex and SMC-50 both use DPI (Drive
Peripheral Interface) communication. The DPI communication with the SMC family utilizes the 20-COMM
modules used on the PowerFlex 7 family.
DeviceNet 20-COMM-D
ControlNet 20-COMM-C
Remote I/O 20-COMM-R
Profibus 20-COMM-P
RS 485 20-COMM-S
InterBus 20-COMM-I
EtherNet 20-COMM-E
RS 485 HVAC 20-COMM-H
ControlNet (Fiber) 20-COMM-Q

Free software.
The SMC-Flex and the SMC-50 can be directly programmed and monitored using Connected Components
Workbench (CCW) software with an appropriate 1203-SSS or 1203-USB cable. CCW does not support
SCANport.
http://www.rockwellautomation.com/products-technologies/connected-
components/tools/workbench.page#/tab4
Below is a side by side comparison showing most common features of the individual SMCs. Knowing the
application the SMC will be used in will help determine which controller would be best to migrate to.
Dimensional and Weight Comparison
Controller Approximate Devic e (inc hes) Primary Mounting (inc hes) Additional Mounting (inc hes) DIN Rail (inches) Mtg. Hole E1 Mtg. Hole E2 Mtg. Hole E3
W eight (lbs)
Product Line Rating [A] W idth Height Depth W idth Height W idth Height Height Top to Center Added Depth Dia. (inc hes) Dia. (inc hes) Dia. (inc hes)
A B C D1 E1 D2 E2 E3 F G
24 6.06 7.09 7.32 5.51 6.30 — 5.51 — — — 0.28 0.22 — 10.5
35 8.43 9.45 7.71 7.87 7.87 — 7.09 — — — 0.28 0.22 — 15.5
54 9.61 11.42 8.89 9.06 9.45 — 7.87 — — — 0.22 0.28 — 25.5
97 9.77 13.23 10.09 8.66 9.84 — — — — — 0.28 — — 23.5
135 9.77 13.23 10.09 8.66 9.84 — — — — — 0.28 — — 26.5
Dialog
180 10.75 22.06 11.58 9.88 11.00 — — 5.50 — — 0.28 — 0.28 55.4
240 10.75 22.06 11.58 9.88 11.00 — — 5.50 — — 0.28 — 0.28 65.4
360 10.75 22.06 11.58 9.88 11.00 — — 5.50 — — 0.28 — 0.28 65.4
500 20.00 23.17 12.23 19.25 15.50 — — 7.75 — — 0.31 — 0.31 90.4
650-1000 32.00 60.00 15.83 30.25 58.25 — — 29.13 — — 0.50 — 0.50 370
1…37 1.76 5.54 4.33 1.38 5.20 — — — 1.81 0.06 0.18 — — 1.9
43…85 2.83 8.11 5.12 2.17 7.80 — — — 4.02 0.06 0.21 — — 5.0

SMC 3 108…135 7.74 17.47 8.08 6.56 14.45 — — — — — 0.30 — — 33.0

201…251 8.86 22.05 10.45 5.91 19.85 — — — — — 0.45 — — 67.0
317…480 11.42 23.62 11.73 7.87 21.23 — — — — — 0.45 — — 101.0
5…85 5.91 12.64 8.00 4.72 11.46 — — — — — 0.30 — — 12.6
108…135 7.74 17.47 8.36 6.56 14.45 — — — — — 0.30 — — 33.0
201…251 8.86 22.05 10.07 5.91 19.85 — — — — — 0.45 — — 67.0
SMC FLEX
317…480 11.42 23.62 10.96 7.87 21.23 — — — — — 0.49 — — 101.0
625…780 23.50 41.00 13.63 21.69 38.45 — 15.50 — — — 0.50 — 0.50 395.0
970…1250 23.50 41.00 13.63 21.69 38.45 — 15.50 — — — 0.50 — 0.50 495.0
90-180 7.65 15.62 10.21 7.65 13.39 2.76 — — — — 0.30 .30 (D2) — 35.1
SMC 50 210-320 10.75 25.14 10.75 9.84 23.25 — — — — — 0.28 — — 105.0
361-520 18.00 27.25 11.64 15.00 25.25 — — — — — 0.39 — — 170.0

Controller Approximate Devic e (mm) Primary Mounting (mm) Additional Mounting (mm) DIN Rail (mm) Mtg. Hole E1 Mtg. Hole E2 Mtg. Hole E3
W eight (Kg.)
Product Line Rating [A] W idth Height Depth W idth Height W idth Height Height Top to Center Added Depth Dia. (mm) Dia. (mm) Dia. (mm)
A B C D1 E1 D2 E2 E3 F G
24 153.9 180.1 185.9 140.0 160.0 — 140.0 — — — 7.1 5.6 — 4.8
35 214.1 240.0 195.8 199.9 199.9 — 180.1 — — — 7.1 5.6 — 7.0
54 244.1 290.1 225.8 230.1 240.0 — 199.9 — — — 5.6 7.1 — 11.6
97 248.2 336.0 256.3 220.0 249.9 — — — — — 7.1 — — 10.7
135 248.2 336.0 256.3 220.0 249.9 — — — — — 7.1 — — 12.0
Dialog
180 273.1 560.3 294.1 251.0 279.4 — — 139.7 — — 7.1 — 7.1 25.1
240 273.1 560.3 294.1 251.0 279.4 — — 139.7 — — 7.1 — 7.1 29.7
360 273.1 560.3 294.1 251.0 279.4 — — 139.7 — — 7.1 — 7.1 29.7
500 508.0 588.5 310.6 489.0 393.7 — — 196.9 — — 7.9 — 7.9 41.0
650-1000 812.8 1524.0 402.1 768.4 1479.6 — — 739.9 — — 12.7 — 12.7 167.8
1…37 44.7 140.7 109.9 35.1 132.1 — — — 46.0 1.6 4.6 — — 0.9
43…85 71.9 206.0 130.0 55.1 198.1 — — — 102.1 1.6 5.3 — — 2.3

SMC 3 108…135 196.6 443.7 205.2 166.6 367.0 — — — — — 7.5 — — 15.0

201…251 225.0 560.1 265.4 150.1 504.2 — — — — — 11.4 — — 30.4
317…480 290.1 599.9 297.9 199.9 539.2 — — — — — 11.4 — — 45.8
5…85 150.1 321.1 203.2 119.9 291.1 — — — — — 7.6 — — 5.7
108…135 196.6 443.7 212.3 166.6 367.0 — — — — — 7.6 — — 15.0
201…251 225.0 560.1 255.9 150.0 504.2 — — — — — 11.4 — — 30.4
SMC FLEX
317…480 290.1 599.9 278.4 199.9 539.2 — — — — — 12.4 — — 45.8
625…780 596.9 1041.4 346.2 550.9 976.6 — 393.7 — — — 12.7 — 12.7 179.2
970…1250 596.9 1041.4 346.2 550.9 976.6 — 393.7 — — — 12.7 — 12.7 224.5
90-180 194.3 396.7 259.3 194.3 340.1 70.1 — — — — 7.6 7.6 (D2) — 15.9
SMC 50 210-320 273.1 638.6 273.1 249.9 590.6 — — — — — 7.1 — — 47.6
361-520 457.2 692.2 295.7 381.0 641.4 — — — — — 9.9 — — 77.1
 D2

C
G

E3

B
E2
E1

D1

The following pages are the crosses from SMC-Dialog to the SMC-Flex.
Open Non-Combination Controllers
200...460V AC @ 50/60 Hz, 120V AC Control Voltage
SMC Dialog Plus SMC-50 / SMC-Flex
Max Motor Max Motor
Catalog Current [A] Control Options Catalog Current [A] Model Control Options Bypass Notes
150-B24NBD None
150-B24NBDA Soft Stop 150-F25NBD Standard
150-B24NBDC Preset Slow Speed
150-B24NBDB 24 Pump Control 150-F25NBDB 25 SMC-Flex Pump Control Integral bypass
150-B24NBDD SMB Smart Motor Braking
150-B24NBDE Accu-Stop 150-F25NBDD Braking
150-B24NBDF Slow Speed Braking
150-B35NBD None
150-B35NBDA Soft Stop 150-F43NBD Standard
150-B35NBDC Preset Slow Speed
150-B35NBDB 35 Pump Control 150-F43NBDB 43 SMC-Flex Pump Control Integral bypass
150-B35NBDD SMB Smart Motor Braking
150-B35NBDE Accu-Stop 150-F43NBDD Braking
150-B35NBDF Slow Speed Braking
150-B54NBD None
150-B54NBDA Soft Stop 150-F60NBD Standard
150-B54NBDC Preset Slow Speed
150-B54NBDB 54 Pump Control 150-F60NBDB 60 SMC-Flex Pump Control Integral bypass
150-B54NBDD SMB Smart Motor Braking
150-B54NBDE Accu-Stop 150-F60NBDD Braking
150-B54NBDF Slow Speed Braking
*150-SB1NBD 90 SMC-50 External bypass
150-B97NBDx 97 Any
150-SB2NBD 110 SMC-50 External bypass
150-B135NBDx 135 Any 150-SB3NBD 140 SMC-50 External bypass
150-B180NBDx 180 Any 150-SB4NBD 180 SMC-50 External bypass
*150-SC1NBD 210 SMC-50 External bypass
150-B240NBDx 240 Any
150-SC2NBD 260 SMC-50 External bypass
*150-SC3NBD 320 SMC-50 External bypass
150-B360NBDx 360 Any
150-SD1NBD 361 SMC-50 External bypass
*150-SD2NBD 420 SMC-50 External bypass
150-B500NBDx 500 Any
150-SD3NBD 520 SMC-50 External bypass
*150-F625NBE 625
150-B650NBD None
150-F780NBE 780
*150-F625NBE 625
150-B650NBDA Soft Stop Standard
150-F780NBE 780
*150-F625NBE 625
150-B650NBDC Preset Slow Speed
150-F780NBE 780
*150-F625NBEB 625
150-B650NBDB 650 Pump Control SMC-Flex Pump Control Integral bypass
150-F780NBEB 780
*150-F625NBED 625
150-B650NBDD SMB Smart Motor Braking
150-F780NBED 780
*150-F625NBED 625
150-B650NBDE Accu-Stop Braking
150-F780NBED 780
*150-F625NBED 625
150-B650NBDF Slow Speed Braking
150-F780NBED 780
150-B720NBD None
150-B720NBDA Soft Stop 150-F780NBE Standard
150-B720NBDC Preset Slow Speed
150-B720NBDB 720 Pump Control 150-F780NBEB 780 SMC-Flex Pump Control Integral bypass
150-B720NBDD SMB Smart Motor Braking
150-B720NBDE Accu-Stop 150-F780NBED Braking
150-B720NBDF Slow Speed Braking
150-B850NBD None
150-B850NBDA Soft Stop 150-F970NBE Standard
150-B850NBDC Preset Slow Speed
150-B850NBDB Pump Control 150-F970NBEB 970 SMC-Flex Pump Control Integral bypass
150-B850NBDD SMB Smart Motor Braking
150-B850NBDE Accu-Stop 150-F970NBED Braking
150-B850NBDF 850 Slow Speed Braking
*150-F970NBE 970
150-B1000NBD None
150-F1250NBE 1250
*150-F970NBE 970
150-B1000NBDA Soft Stop Standard
150-F1250NBE 1250
*150-F970NBE 970
150-B1000NBDC Preset Slow Speed
150-F1250NBE 1250
*150-F970NBEB 970
150-B1000NBDB 1000 Pump Control SMC-Flex Pump Control Integral bypass
150-F1250NBEB 1250
*150-F970NBED 970
150-B1000NBDD SMB Smart Motor Braking
150-F1250NBED 1250
*150-F970NBED 970
150-B1000NBDE Accu-Stop Braking
150-F1250NBED 1250
*150-F970NBED 970
150-B1000NBDF Slow Speed Braking
150-F1250NBED 1250
* Use SMC Estimation Wizard before considering this catalog.
Open Non-Combination Controllers
200…575V AC @ 50/60 Hz, 120V AC Control Voltage
SMC Dialog Plus SMC-50 / SMC-Flex
Max Motor Max Motor
Catalog Current [A] Control Options Catalog Current [A] Model Control Options Bypass Notes
150-B24NCD None
150-B24NCDA Soft Stop 150-F25NCD Standard
150-B24NCDC Preset Slow Speed
150-B24NCDB 24 Pump Control 150-F25NCDB 25 SMC-Flex Pump Control Integral bypass
150-B24NCDD SMB Smart Motor Braking
150-B24NCDE Accu-Stop 150-F25NCDD Braking
150-B24NCDF Slow Speed Braking
150-B35NCD None
150-B35NCDA Soft Stop 150-F43NCD Standard
150-B35NCDC Preset Slow Speed
150-B35NCDB 35 Pump Control 150-F43NCDB 43 SMC-Flex Pump Control Integral bypass
150-B35NCDD SMB Smart Motor Braking
150-B35NCDE Accu-Stop 150-F43NCDD Braking
150-B35NCDF Slow Speed Braking
150-B54NCD None
150-B54NCDA Soft Stop 150-F60NCD Standard
150-B54NCDC Preset Slow Speed
150-B54NCDB 54 Pump Control 150-F60NCDB 60 SMC-Flex Pump Control Integral bypass
150-B54NCDD SMB Smart Motor Braking
150-B54NCDE Accu-Stop 150-F60NCDD Braking
150-B54NCDF Slow Speed Braking
*150-SB1NUD 90 SMC-50 External bypass
150-B97NCDx 97 Any
150-SB2NUD 110 SMC-50 External bypass
150-B135NCDx 135 Any 150-SB3NUD 140 SMC-50 External bypass
150-B180NCDx 180 Any 150-SB4NUD 180 SMC-50 External bypass
*150-SC1NUD 210 SMC-50 External bypass
150-B240NCDx 240 Any
150-SC2NUD 260 SMC-50 External bypass
*150-SC3NUD 320 SMC-50 External bypass
150-B360NCDx 360 Any
150-SD1NUD 361 SMC-50 External bypass
*150-SD2NUD 420 SMC-50 External bypass
150-B500NCDx 500 Any
150-SD3NUD 520 SMC-50 External bypass
*150-F625NCE 625
150-B650NCD None
150-F780NCE 780
*150-F625NCE 625
150-B650NCDA Soft Stop Standard
150-F780NCE 780
*150-F625NCE 625
150-B650NCDC Preset Slow Speed
150-F780NCE 780
*150-F625NCEB 625
150-B650NCDB 650 Pump Control SMC-Flex Pump Control Integral bypass
150-F780NCEB 780
*150-F625NCED 625
150-B650NCDD SMB Smart Motor Braking
150-F780NCED 780
*150-F625NCED 625
150-B650NCDE Accu-Stop Braking
150-F780NCED 780
*150-F625NCED 625
150-B650NCDF Slow Speed Braking
150-F780NCED 780
150-B720NCD None
150-B720NCDA Soft Stop 150-F780NCE Standard
150-B720NCDC Preset Slow Speed
150-B720NCDB 720 Pump Control 150-F780NCEB 780 SMC-Flex Pump Control Integral bypass
150-B720NCDD SMB Smart Motor Braking
150-B720NCDE Accu-Stop 150-F780NCED Braking
150-B720NCDF Slow Speed Braking
150-B850NCD None
150-B850NCDA Soft Stop 150-F970NCE Standard
150-B850NCDC Preset Slow Speed
150-B850NCDB Pump Control 150-F970NCEB 970 SMC-Flex Pump Control Integral bypass
150-B850NCDD SMB Smart Motor Braking
150-B850NCDE Accu-Stop 150-F970NCED Braking
150-B850NCDF 850 Slow Speed Braking
*150-F970NCE 970
150-B1000NCD None
150-F1250NCE 1250
*150-F970NCE 970
150-B1000NCDA Soft Stop Standard
150-F1250NCE 1250
*150-F970NCE 970
150-B1000NCDC Preset Slow Speed
150-F1250NCE 1250
*150-F970NCEB 970
150-B1000NCDB 1000 Pump Control SMC-Flex Pump Control Integral bypass
150-F1250NCEB 1250
*150-F970NCED 970
150-B1000NCDD SMB Smart Motor Braking
150-F1250NCED 1250
*150-F970NCED 970
150-B1000NCDE Accu-Stop Braking
150-F1250NCED 1250
*150-F970NCED 970
150-B1000NCDF Slow Speed Braking
150-F1250NCED 1250
* Use SMC Estimation Wizard before considering this catalog.
Open Non-Combination Controllers
200...460V AC @ 50/60 Hz, 24V DC Control Voltage
SMC Dialog Plus SMC-50 / SMC-Flex
Max Motor Max Motor
Catalog Current [A] Control Options Catalog Current [A] Model Control Options Bypass Notes
150-B24NBR None
150-B24NBRA Soft Stop 150-F25NBR Standard
150-B24NBRC Preset Slow Speed
150-B24NBRB 24 Pump Control 150-F25NBRB 25 SMC-Flex Pump Control Integral bypass
150-B24NBRD SMB Smart Motor Braking
150-B24NBRE Accu-Stop 150-F25NBRD Braking
150-B24NBRF Slow Speed Braking
150-B35NBR None
150-B35NBRA Soft Stop 150-F43NBR Standard
150-B35NBRC Preset Slow Speed
150-B35NBRB 35 Pump Control 150-F43NBRB 43 SMC-Flex Pump Control Integral bypass
150-B35NBRD SMB Smart Motor Braking
150-B35NBRE Accu-Stop 150-F43NBRD Braking
150-B35NBRF Slow Speed Braking
150-B54NBR None
150-B54NBRA Soft Stop 150-F60NBR Standard
150-B54NBRC Preset Slow Speed
150-B54NBRB 54 Pump Control 150-F60NBRB 60 SMC-Flex Pump Control Integral bypass
150-B54NBRD SMB Smart Motor Braking
150-B54NBRE Accu-Stop 150-F60NBRD Braking
150-B54NBRF Slow Speed Braking
*150-SB1NBR 90 SMC-50 External bypass
150-B97NBRx 97 Any
150-SB2NBR 110 SMC-50 External bypass
150-B135NBRx 135 Any 150-SB3NBR 140 SMC-50 External bypass
150-B180NBRx 180 Any 150-SB4NBR 180 SMC-50 External bypass
*150-SC1NBR 210 SMC-50 External bypass
150-B240NBRx 240 Any
150-SC2NBR 260 SMC-50 External bypass
*150-SC3NBR 320 SMC-50 External bypass
150-B360NBRx 360 Any
150-SD1NBR 361 SMC-50 External bypass
*150-SD2NBR 420 SMC-50 External bypass
150-B500NBRx 500 Any
150-SD3NBR 520 SMC-50 External bypass
*150-F625NBE 625 120V AC Control Only
**150-B650NBR None
150-F780NBE 780 120V AC Control Only
*150-F625NBE 625 120V AC Control Only
**150-B650NBRA Soft Stop Standard
150-F780NBE 780 120V AC Control Only
*150-F625NBE 625 120V AC Control Only
**150-B650NBRC Preset Slow Speed
150-F780NBE 780 120V AC Control Only
*150-F625NBEB 625 120V AC Control Only
**150-B650NBRB 650 Pump Control SMC-Flex Pump Control Integral bypass
150-F780NBEB 780 120V AC Control Only
*150-F625NBED 625 120V AC Control Only
**150-B650NBRD SMB Smart Motor Braking
150-F780NBED 780 120V AC Control Only
*150-F625NBED 625 120V AC Control Only
**150-B650NBRE Accu-Stop Braking
150-F780NBED 780 120V AC Control Only
*150-F625NBED 625 120V AC Control Only
**150-B650NBRF Slow Speed Braking
150-F780NBED 780 120V AC Control Only
**150-B720NBR None 120V AC Control Only
**150-B720NBRA Soft Stop 150-F780NBE Standard 120V AC Control Only
**150-B720NBRC Preset Slow Speed 120V AC Control Only
**150-B720NBRB 720 Pump Control 150-F780NBEB 780 SMC-Flex Pump Control Integral bypass 120V AC Control Only
**150-B720NBRD SMB Smart Motor Braking 120V AC Control Only
**150-B720NBRE Accu-Stop 150-F780NBED Braking 120V AC Control Only
**150-B720NBRF Slow Speed Braking 120V AC Control Only
**150-B850NBR None 120V AC Control Only
**150-B850NBRA Soft Stop 150-F970NBE Standard 120V AC Control Only
**150-B850NBRC Preset Slow Speed 120V AC Control Only
**150-B850NBRB Pump Control 150-F970NBEB 970 SMC-Flex Pump Control Integral bypass 120V AC Control Only
**150-B850NBRD SMB Smart Motor Braking 120V AC Control Only
**150-B850NBRE Accu-Stop 150-F970NBED Braking 120V AC Control Only
**150-B850NBRF 850 Slow Speed Braking 120V AC Control Only
*150-F970NBE 970 120V AC Control Only
**150-B1000NBR None
150-F1250NBE 1250 120V AC Control Only
*150-F970NBE 970 120V AC Control Only
**150-B1000NBRA Soft Stop Standard
150-F1250NBE 1250 120V AC Control Only
*150-F970NBE 970 120V AC Control Only
**150-B1000NBRC Preset Slow Speed
150-F1250NBE 1250 120V AC Control Only
*150-F970NBEB 970 120V AC Control Only
**150-B1000NBRB 1000 Pump Control SMC-Flex Pump Control Integral bypass
150-F1250NBEB 1250 120V AC Control Only
*150-F970NBED 970 120V AC Control Only
**150-B1000NBRD SMB Smart Motor Braking
150-F1250NBED 1250 120V AC Control Only
*150-F970NBED 970 120V AC Control Only
**150-B1000NBRE Accu-Stop Braking
150-F1250NBED 1250 120V AC Control Only
*150-F970NBED 970 120V AC Control Only
**150-B1000NBRF Slow Speed Braking
150-F1250NBED 1250 120V AC Control Only
* Use SMC Estimation Wizard before considering this catalog.
** Replacement only available with 120V AC Control
Open Non-Combination Controllers
200…575V AC @ 50/60 Hz, 24V DC Control Voltage
SMC Dialog Plus SMC-50 / SMC-Flex
Max Motor Max Motor
Catalog Current [A] Control Options Catalog Current [A] Model Control Options Bypass Notes
150-B24NCR None
150-B24NCRA Soft Stop 150-F25NCR Standard
150-B24NCRC Preset Slow Speed
150-B24NCRB 24 Pump Control 150-F25NCRB 25 SMC-Flex Pump Control Integral bypass
150-B24NCRD SMB Smart Motor Braking
150-B24NCRE Accu-Stop 150-F25NCRD Braking
150-B24NCRF Slow Speed Braking
150-B35NCR None
150-B35NCRA Soft Stop 150-F43NCR Standard
150-B35NCRC Preset Slow Speed
150-B35NCRB 35 Pump Control 150-F43NCRB 43 SMC-Flex Pump Control Integral bypass
150-B35NCRD SMB Smart Motor Braking
150-B35NCRE Accu-Stop 150-F43NCRD Braking
150-B35NCRF Slow Speed Braking
150-B54NCR None
150-B54NCRA Soft Stop 150-F60NCR Standard
150-B54NCRC Preset Slow Speed
150-B54NCRB 54 Pump Control 150-F60NCRB 60 SMC-Flex Pump Control Integral bypass
150-B54NCRD SMB Smart Motor Braking
150-B54NCRE Accu-Stop 150-F60NCRD Braking
150-B54NCRF Slow Speed Braking
*150-SB1NUR 90 SMC-50 External bypass
150-B97NCRx 97 Any
150-SB2NUR 110 SMC-50 External bypass
150-B135NCRx 135 Any 150-SB3NUR 140 SMC-50 External bypass
150-B180NCRx 180 Any 150-SB4NUR 180 SMC-50 External bypass
*150-SC1NUR 210 SMC-50 External bypass
150-B240NCRx 240 Any
150-SC2NUR 260 SMC-50 External bypass
*150-SC3NUR 320 SMC-50 External bypass
150-B360NCRx 360 Any
150-SD1NUR 361 SMC-50 External bypass
*150-SD2NUR 420 SMC-50 External bypass
150-B500NCRx 500 Any
150-SD3NUR 520 SMC-50 External bypass
*150-F625NCE 625 120V AC Control Only
**150-B650NCR None
150-F780NCE 780 120V AC Control Only
*150-F625NCE 625 120V AC Control Only
**150-B650NCRA Soft Stop Standard
150-F780NCE 780 120V AC Control Only
*150-F625NCE 625 120V AC Control Only
**150-B650NCRC Preset Slow Speed
150-F780NCE 780 120V AC Control Only
*150-F625NCEB 625 120V AC Control Only
**150-B650NCRB 650 Pump Control SMC-Flex Pump Control Integral bypass
150-F780NCEB 780 120V AC Control Only
*150-F625NCED 625 120V AC Control Only
**150-B650NCRD SMB Smart Motor Braking
150-F780NCED 780 120V AC Control Only
*150-F625NCED 625 120V AC Control Only
**150-B650NCRE Accu-Stop Braking
150-F780NCED 780 120V AC Control Only
*150-F625NCED 625 120V AC Control Only
**150-B650NCRF Slow Speed Braking
150-F780NCED 780 120V AC Control Only
**150-B720NCR None 120V AC Control Only
**150-B720NCRA Soft Stop 150-F780NCE Standard 120V AC Control Only
**150-B720NCRC Preset Slow Speed 120V AC Control Only
**150-B720NCRB 720 Pump Control 150-F780NCEB 780 SMC-Flex Pump Control Integral bypass 120V AC Control Only
**150-B720NCRD SMB Smart Motor Braking 120V AC Control Only
**150-B720NCRE Accu-Stop 150-F780NCED Braking 120V AC Control Only
**150-B720NCRF Slow Speed Braking 120V AC Control Only
**150-B850NCR None 120V AC Control Only
**150-B850NCRA Soft Stop 150-F970NCE Standard 120V AC Control Only
**150-B850NCRC Preset Slow Speed 120V AC Control Only
**150-B850NCRB Pump Control 150-F970NCEB 970 SMC-Flex Pump Control Integral bypass 120V AC Control Only
**150-B850NCRD SMB Smart Motor Braking 120V AC Control Only
**150-B850NCRE Accu-Stop 150-F970NCED Braking 120V AC Control Only
**150-B850NCRF 850 Slow Speed Braking 120V AC Control Only
*150-F970NCE 970 120V AC Control Only
**150-B1000NCR None
150-F1250NCE 1250 120V AC Control Only
*150-F970NCE 970 120V AC Control Only
**150-B1000NCRA Soft Stop Standard
150-F1250NCE 1250 120V AC Control Only
*150-F970NCE 970 120V AC Control Only
**150-B1000NCRC Preset Slow Speed
150-F1250NCE 1250 120V AC Control Only
*150-F970NCEB 970 120V AC Control Only
**150-B1000NCRB 1000 Pump Control SMC-Flex Pump Control Integral bypass
150-F1250NCEB 1250 120V AC Control Only
*150-F970NCED 970 120V AC Control Only
**150-B1000NCRD SMB Smart Motor Braking
150-F1250NCED 1250 120V AC Control Only
*150-F970NCED 970 120V AC Control Only
**150-B1000NCRE Accu-Stop Braking
150-F1250NCED 1250 120V AC Control Only
*150-F970NCED 970 120V AC Control Only
**150-B1000NCRF Slow Speed Braking
150-F1250NCED 1250 120V AC Control Only
* Use SMC Estimation Wizard before considering this catalog.
** Replacement only available with 120V AC Control
Wiring Conversion Examples from SMC-Dialog Plus to SMC-50
Standard wiring conversion with AC inputs.
Standard wiring with isolation contactor with AC inputs.
Dialog Plus to SMC-50 replacement for isolation contactor applications with DC inputs.
Isolation contactor applications with control options selected; pump, braking, slow speed, etc.
Replacement for isolation contactor applications control with HIM or communications.

Refer to Rockwell Automation Publication 150-UM011_EN_P SMC-50 User Manual for more details.