CURRICULUM VITAE
S. M. RASHIDUL HASAN
Contact Address:
34, 35, 35/1, Ideal Panorama (Flat E-3), Shantinagar (Peer Shaheeb Goli)
Dhaka-1217, Bangladesh
E-mail: [email protected]
Cell: +8801717050145
Objective
To establish myself as an efficient NAVAL ARCHITECT in an organization that offers a research and
education based environment, nourish the talents and explores inherent abilities for the
development of the organization.
Educational Qualifications
University Education
Degree : Doctor of Philosophy
Institution: Bangladesh University of Engineering & Technology (BUET), Dhaka-1000,
Bangladesh.
Started on 01/11/2014 and continuing.
Degree : Master of Science in Naval Architecture
Institution: Chalmers University of Technology, SE-412 96 Gothenburg, Sweden.
Date of Graduation: January, 2012.
Degree : Bachelor of Science in Naval Architecture and Marine Engineering
Institution: Bangladesh University of Engineering & Technology (BUET), Dhaka-1000,
Bangladesh.
CGPA : 3.51 (on a scale of 4.0), 74.2% marks
Date of Graduation: June, 2007
Public Examinations
Examination HSC SSC
Notre dame College Moulvibazar Govt. High School,
Institution
Moulvibazar
Board Dhaka Comilla
Passing Year 2001 1999
Group Science Science
Result 1st Division* 1st Division*
Marks 82.7% 85.1%
1/5
Thesis Project (Master of Science):
Impact of Energy Efficiency Design Index (EEDI) on Ship Design and Hydrodynamics, a study of the
Energy Efficiency Design Index and other related emission control indexes.
Supervisor: Associate Professor: Rickard Bensow, Department of Shipping and Marine Technology,
Chalmers University, Gothenburg, Sweden.
Thesis Project (Undergraduate):
Computation of Potential Flow around Circular Cylinder by Finite Element Method
Supervisor: Dr. Shahjada Tarafdar, Associate Professor, Department of Naval Architecture & Marine
Engineering, BUET
Research & Publication
‘IMPACT OF EEDI ON SHIP DESIGN AND HYDRODYNAMICS, A STUDY OF THE ENERGY EFFICIENCY
DESIGN INDEX AND OTHER RELATED EMISSION CONTROL INDEXES’, published in the Chalmers
University Library.
‘HYDRODYNAMIC AND ECONOMICAL ANALYSIS FOR THE PERFORMANCE OF THE SHIPS PLYING IN
THE SHALLOW WATER AREAS OF BANGLADESH’, published in the MIST Journal of Science and
Technology, 2013 issue.
‘Improving Fuel Efficiency: An Imperative for Inland Ships of Bangladesh’, Published in the
monthly paper named ‘THE GUARDIAN’ on the October, 2013 issue.
‘IMPLEMENTATION OF ENEGERY EFFICIENCY DESIGN INDEX AND ITS IMPACT on the DESIGN of
container vessels’, Published at the International Conference on the Influence of EEDI on Ship
Design24-25 September 2014, London, UK & International conference on mechanical, industrial
and materials engineering, 2013 ICMIME.
Work Experience
Designation Duration Total Time Company Details
Senior 01/06/2007 to 3 years Marine House Ltd.
Naval 31/07/2010 67, Naya Paltan, City Heart
Architect 16th Floor, Dhaka-1000
Web: www.marinehousebd.com
Research 01/06/2011 to 6 months SSPA AB Sweden
Student 30/11/2011 Chalmers Tvärgata 10
SE-400 22 Göteborg, Sweden.
Web: www.sspa.se
Ship Design 01/09/2011 to 3 months MMT AB Sweden
Project 09/12/2011 Sven Källfelts Gata 11
Student 426 71 Västra Frölunda
Sweden MMT Sweden AB
Web: www.mmt.se
Director 01/02/2012 to 1 year 6 months Ships & Naval Architects Ltd.
30/06/2013 87, Purana Paltan Line, Paltan Tower, 6th
Floor (Suite # 605).
Web: www.snalbd.com
Naval 01/07/2013 to 1 year 4 months Chittagong Drydock Limited, An
Architect 31/10/2014 Enterprise of Bangladesh Steel &
Engineering Corporation (BSEC), Ministry
of Industry, Bangladesh
2/5
Training & Workshop
Three weeks long training at Bangladesh Institute of Marine Technology (BIMT) and Ananda
Shipyard and Slipways Limited.
Three weeks long training at Khulna Shipyard Limited (KSY).
Engine Room Simulator workshop, Shipping and Marine Technology Department, Sweden.
Full Mission Bridge Simulator workshop, Shipping and Marine Technology Department, Sweden.
Experimental resistance prediction at SSPA Sweden AB,
Model test and full scale trials, SSPA Sweden AB.
ISO 9001-2008 Training for Quality Management System and Internal Audit.
Seminars & Technical Visits
Visit at Rolls-Royce, Kristinehamn (Propulsion), Sweden.
Visit at Berg Propulsion, Sweden.
Visit at Göteborg, Sweden, Hamn port facilities.
Participant of the Technical Seminar on the software IPCA (INTEGRATED PROGRAM FOR
CALCULATION OF SHIP’S PERFORMANCE CAPABILITY) demonstrated by Mitsuhiko Kidogawa
(Principal Surveyor, Manager Hull department, Class NK) and Shohei Minegaki (staff, Hull
department, Class NK).
Technical seminar by Class NK, Japan.
Responsibilities:
Basic drawing preparation for approval from class authority.
Maintaining class correspondence.
Preparing lines plan.
Scantling calculation as per classification society rules.
Hydrostatic, Trim and Stability Calculation fulfilling all criterions by class authority.
Fire control and safety plan.
Resistance and required power calculation for vessels.
Prepare the optimum principal particulars in terms of energy efficiency.
Calculation of propeller particulars.
Production drawing for construction.
Communicating with owner’s representative, site engineers and contractors.
Preparation of Bill of Quantity.
Preparation of building cost of vessels.
Preparation of tender documents.
Maintaining liaison with Government’s regulatory authority and fulfil the requirements.
Support banks for evaluation of loan.
Cost estimation of repair work requirements.
Job Performed
Preparation of optimum principal particulars, lines plan, resistance and propulsion power
prediction, hydrostatic and stability as a member of hydromechanics group for the design of
Research Vessel for MMT Sweden AB.
Researched and Analysed the Impact of Energy Efficiency Design Index (EEDI) on Ship Design
and Hydrodynamics for SSPA Sweden AB.
Prepared the optimum principal particulars, lines plan, resistance and propulsion power
prediction, hydrostatic and stability for RINA class 1600 dwt oil tanker.
Prepared the optimum principal particulars, lines plan, resistance and propulsion power
prediction, hydrostatic and stability for DOS class Catamaran Passenger Vessel.
Prepared the optimum principal particulars, lines plan, resistance and propulsion power
prediction, hydrostatic and stability for DOS class 550 dwt Shallow Draft Oil Tanker.
3/5
Preparation of general arrangement drawing of a special type of vessel named MPSSU (Multi
Purpose Semi Submersible Unit), which is basically twin hull shaped with a working platform
14.5m high from the base line.
Preparation of basic designs and calculations for the approval from the class authority (Bureau
Veritas) of 10.2 bollard pull Tug Boat.
Production drawings for the construction of 8 numbers of 1400 dwt general cargo vessels.
Preparation basic designs of 4 nos. 2200 dwt general cargo vessels for approval (Hull class from
Germanischer Lloyd’s).
Project manager for the production of 4 nos. 2200 dwt General cargo vessels.
Basic drawings of 4 nos. Catamaran inland passenger vessels.
Preparation of general arrangement drawings for multipurpose platform supply vessel with DP-2
facilities, Catamaran, Oil tanker.
Scantling preparation for 2200 dwt general cargo vessels.
Scantling preparation for Catamaran inland passenger vessels.
Basic Designs, Stability, Resistance and Propulsion calculation for 30 nos. passenger chine hull
boat.
Specialization:
Optimizing hull shape to have higher fuel efficiency using Energy Efficiency Design Index.
Auto Cad, Autoship, AutoHydro, Maxsurf, Hydromax, Hull Speed, Navcad, Propexpert, Rhino:
Used for making new hull lines, converting 2d lines into 3d model, hydrostatics and stability
calculation, longitudinal strength calculation, power calculation, etc.
Structural Designs according to rulebooks (Det Norske Veritas (DNV), Lloyd’s Register,
Germanischer Lloyd’s, Bureau Varitas, NIPPON KAIJI KYOKAi, etc).
Membership:
Associate Member of Royal Institute of Naval Architects (RINA), UK. Membership # 00316651
Member of Institute of Engineers, Bangladesh (IEB). Membership # M 27912
Life Member of Association of Naval Architect & Marine Engineers, Bangladesh.
Language Proficiency
Have good written and verbal communication skill in English and Bengali.
Computer Skills
Operating System : Windows XP, Windows 7.
Word Processor : Microsoft Word
Presentation : Microsoft Power Point
Spreadsheet Analysis : Microsoft Excel
Designing Software :
Maxsurf : Expert
Hydromax : Expert
NavCad : Expert
PropCad : Expert
Rhino 3D : Expert
Autocad : Expert
Autoship : Moderate
Autohydro : Moderate
Shipflow : Basic
Programming Language : FORTRAN
Others : Internet, E-mail, Web Browsing
4/5
Personal Information
st
Date of Birth : 31 December, 1984
Father : Md. Zamal Uddin Shikdar
Mother : Mrs. Rashida Begum
Religion : Islam
Nationality : Bangladeshi by birth
Gender : Male
Marital Status : Single
Blood group : B+
Permanent Address
34, 35, 35/1, Peer Shaheeb Goli (Ideal Panorama, Flat No: E-3), Shantinagar, Dhaka-1217,
Bangladesh.
References
Dr. Md. Shahjada Tarafder
Professor & Head of the
Department of Naval Architecture and Marine Engineering.
Bangladesh University of Engineering & Technology (BUET)
Ph: 9673605 Ext: 7828
E-mail: [email protected]
Dr. M. Reaz Hasan Khondoker, PEng.
Ex Head of the Department of Naval Architecture & Marine Engineering
Bangladesh University of Engineering & Technology (BUET)
Cell: +8801937594597
E-mail:
[email protected]Dr. Abdur Rahim
Ex Associate Professor, Dept of Naval Architecture & Marine Engineering
Bangladesh University of Engineering & Technology (BUET)
Present Director of Khan Brothers Ship building Limited.
Cell: +8801924076650
E-mail:
[email protected]I declare that information given above is true & correct.
13.12.2014
______________________
S.M. Rashidul Hasan
5/5
