Scribd
Upload
109 views6 pages

BSOD

The document discusses various Blue Screen of Death error codes, their potential causes, and possible solutions. The top 19 BSOD error codes and stop codes are described, along with common issues that may cause each error such as driver conflicts, hardware failures, or software bugs. Solutions include updating drivers, disabling conflicting devices or services, checking for damaged hardware, and ensuring the computer's hardware matches the installed Windows version.

Uploaded by

Nychi Sitchon
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
109 views6 pages

BSOD

The document discusses various Blue Screen of Death error codes, their potential causes, and possible solutions. The top 19 BSOD error codes and stop codes are described, along with common issues that may cause each error such as driver conflicts, hardware failures, or software bugs. Solutions include updating drivers, disabling conflicting devices or services, checking for damaged hardware, and ensuring the computer's hardware matches the installed Windows version.

Uploaded by

Nychi Sitchon
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 6

BSOD (BLUE SCREEN OF DEATH) CAUSES AND SOLUTIONS

The “Blue Screen of Death,” Microsoft Windows’ well-known error message, is more
technically known as a “Stop error.” The BSoD has been around since the Windows 1.0 days,
though it’s replaced in the upcoming Windows 8 with a friendlier version, complete with “sad
face” emoticon. The stop error screen signifies that Windows has experienced an unrecoverable
error and needs to restart. There are various reasons for the infamous BSoD. The top five are
described here with their causes and possible solutions.

1.(stop code 0X000000BE) Attempted Write To Readonly Memory

Possible causes and solutions:


This symptom is caused by a driver or program, or a service, such as some files corrupted file
error drivers in different versions. To uninstall the program to fix that before this problem
occurs. If a driver went to roll back drivers for older drivers or applied to the last (if later). If they
service the us open before a problem occurs, turn off or disable it!

2.(stop code 0X000000C2) Bad Pool Caller

Possible causes and solutions:


This is similar to the above but focus their hardware is caused by the different countries, such as
South grade Hardware ram, the card is not compatible with XP harddisk solution, remove the
device that South grade. If needed, update the drivers or firmware of that device, the new South
and the warning will update South, close it by coding only anti-virus in 1995 because they think
it is an anti-virus program viruses.

3.(stop code 0X0000002E) Data Bus Error

Possible causes and solutions:


This symptom is caused by the transmission of a BUS called corrupt hard software including
system RAM, L2 Cache of the CPU, memory, hard disk, video card through hard work. Error
(too hot) and the motherboard died

4.(stop code 0X000000D1) Driver IRQL Not Less Or Equal

Possible causes and solutions:


Symptoms with drivers IRQ (Interrupt Request). It was the same error message 1.

5. (stop code 0X0000009F) Driver Power State Failure

Possible causes and solutions:


This symptom is caused by a power management system with conflicting drivers or service.
When you allow a "Hibernate" Solutions If the error says Windows drivers or service for which
the uninstall, or you can use Rollback driver Windows power management system on or off!

6.(stop code 0X000000CE) Driver Unloaded Without Cancelling Pending Operations

Possible causes and solutions:


Despite gradual symptoms itself off drivers in Windows is not yet ordered. Edit, like an 1

7.(stop code 0X000000F2) Hardware Interrupt Storm

Possible causes and solutions:


Symptoms caused by hardware devices, such as USB or SCSI controller IRQ with alignment
errors caused by drivers or Firmware to fix the same bug 1.

8.(stop code 0X0000007B) Inaccessible Boot Device

Possible causes and solutions:


This symptom will often encounter the Windows boot process, a message says cannot read the
data of the file system or Boot partitions, make hard TU as usual? The cable or power cable into
the hard disk is dropped or not. If good, check the Boot.ini file may be damaged or not, is a Multi
OS, make sure that this file may be write Config OS's conflict.

Again, if this error occurs, one that is caused when the Windows upgrade caused by certain
devices are not Compatible, try removing the device does not have or think there is a problem.
When you upgrade Windows successfully. Then remove the device with the problem put back
and installed with the driver. The latest version of the server.

9. (stop code 0X0000007A) Kernel Data Inpage Error

Possible causes and solutions:


This symptom occurs there is a problem with the Windows virtual memory system is unable to
read or write the data from your hard disk swapfile. the cause occurred, bad sector infected,
system RAM, SCSI error or faulty system board.

10.(stop code 0X00000077) Kernel Stack Inpage Error

Possible causes and solutions:


Symptoms and causes the same error 9
11.(stop code 0X0000001E) Kmode Exception Not Handled

Possible causes and solutions:


This symptom occurs, the error of the driver or service with memory and IRQ if there is a list of
files or service provides them with this error, uninstall the program or Roll back drivers.

If the error says that the file win32k is caused by third-party software control (Third-party) that
does not use the Windows which often occurs with most Networking and Wireless.
This Error may occur because the roast is to run an iko but insufficient memory.

12.(stop code 0X00000079) Mismatched Hal

Possible causes and solutions:


This behavior causes malfunction of Hardware Abstraction Layer (HAL) to understand the
Prince HAL HAL is responsible as the previous system of contact between hardware and
software fawae that applications which run with the option correctly? For example, you have a
software that is designed for use with Dual CPU motherboard to the CPU as the Single window
will not work. How to fix the Windows reinstall is.

Another reason is the file named NToskrnl.exe or Hal.dll has expired, or edited, removing the
Backup files or remove the original file or cannot think that latest version transcribed it:

13.(stop code 0X0000003F) No More System PTEs

Possible causes and solutions:


This symptom is caused by the system Page Table Entries (PTEs) by Virtual Memory Manager
(VMM) error causes Windows to work without PTEs that are required for Windows. This
symptom often occurs with which you work, multi monitors.

If this problem occurs often, you can adjust the PTEs. As follows:
1. Open Registry Editor by going to Start up > Run, and then type the command Regedit.

2. follow this key Management


HKEY_LOCAL_MACHINESYSTEMCurrentControlSetControlSe ssion ManagerMemory

3. see the right level click the PagedPoolSize Value, enter the value as 0 data and click OK.

4. Double-click SystemPages if you use System Monitor, Multi Monitor, enter the Value data or
enter 36000 40000 if you have RAM.
128 MB and RAM is 110000 if more than 128 MB, and then click OK to restart your computer.
14.(stop code 0X00000024) NTFS File System

Possible causes and solutions:


This symptom is caused by the reports of drivers Ntfs.sys is error NTFS read and write data
error. This can include Wen tout malfunctions of your IDE or SCSI controller, because the your
virus-scanning program, or an area of your hard disk damaged khun can know the details of the
error. This by opening Event Viewer how to open, view, go to the start > run and type the
command eventvwr.msc to open the View Log file of error, see the error of SCSI or FASTFAT
in the System, or Autochk in the Application category of the stub.

15.(stop code 0X00000050) Page Fault In Nonpaged Area

Possible causes and solutions:


This behavior causes the error to write data in RAM, editing, clean the PIN swap. Test program
that checked bad .dll

16.(stop code 0Xc0000221) Status Image Checksum Mismatch

Possible causes and solutions:


This symptom is caused by a corrupted swapfile includes drivers. It was like an 15.

17.(stop code 0X000000EA) Thread Stuck In Device Driver

Possible causes and solutions:


The symptom of this error is that your computer is running in a loop repeatedly not ending, the
error notification or any satot whatever it don't stop. The cause of this problem may be caused by
a Bug of program or other causes is. To fix this, try to follow.

1. See your Power supply enough power supply with demand of you, see if you have many
devices to not suit your Power supply, it is the leftmost new release.

-First event win 1.1 Born from the second (I have set to address the current Notebook 2)
specification, primarily coding.
CPU:AMD Barton 2500 (210*11=2310)
M/B:Abit A7N
Ram:1G Dual Kington
Powersupply: Enamax 465P-VE
And decorate abundantly The first, a program or game that has been heavy desks the hom came
one day, this error condition occurs as an ideal solution, and then try again, it is not just the
excuse, your article to see A-e-e of this link by UnlimitPC [Link available to registered users
only. Click here to register.] , take a look at the Bios, it is true you ฺ A-e-e that it won't delay
your management A-e-e taught many symptoms without completely lost heart cycle. Thankful
you A-e-e come over here with me.

-Second win with 1.2 contributes the first specification components.


CPU: AMD 1700 T-Bred (166 * 11 = 1826) (Over clock on the brain).
M/B:Soltek 75FRN2-RL
Ram:512MB Dual Geil
Powersupply: Enamax 351P-VE
And decorate it like a true mamuean. has no problem did exist, this error again. This time he
does not fear, understand that when Wen, make the Bios it locally as ever, they manage to edit it
wont come. Not lost on me as it is with a removable seat ngom tem all machine parts, check out
the problem until it is a Capacitor that motherboard for the CPU power supply with low salt
island .some swelling.
Writing came long to actually win, know to tell your people may be having problems like me
khun is not the solution.

2. You see video card drivers that use the latest. If you use the recent guidence and still have
symptoms, perform Rollback the drivers before the problem occurs.

3. Check the video card and the motherboard is damaged or missing, burn, laiwongchon. A piece
of garden pieces from the same place.

4. See if Bios VGA slot select mode section, 4x, 8x, is based on the specification of garbage or
not.

5. Check to see that the server has the record bo damen spring drive or not if you have to load the
new!

6. If you have a LAN card or your motherboard with on board, disable the functions "PXE
Resume/Remote Wake Up" by going to the BIOS.

18.(stop code 0X0000007F) Unexpected Kernel Mode Trap

Possible causes and solutions:


This symptom is most to Overclock (hair one) is not CPU RAM transmission, symptoms are
related to CPU is running too fast or overheat caused by clock Overclock solutions is reduced
down to a normal for the cooling of the CPU.

19. (stop code 0X000000ED) Unmountable Boot Volume

Possible causes and solutions:


Symptoms that Windows finds hard to find (not boots) If you have multiple hard disks. In it, you
may use wire nueng packages of hard errors, such as a hard disk as a 33MB/40, which used a
secound pin, but you continue removing 80 pin instead.

You might also like