Scribd
Upload
59K views1 page

CNC Daily Maintenance Checklist

This document provides a daily preventive maintenance check list for a CNC machine. It lists 13 check points to inspect visually and manually on a daily basis, including ensuring proper oil, coolant, and hydraulic fluid levels; that machine guards and doors are securely in place; checking for abnormal sounds; inspecting for leaks; ensuring cutting tools and holders are tight; and keeping the machine clean and lubricated. Operators and supervisors must sign off to verify that the daily checks were completed.

Uploaded by

Dilip Kumar K
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
59K views1 page

CNC Daily Maintenance Checklist

This document provides a daily preventive maintenance check list for a CNC machine. It lists 13 check points to inspect visually and manually on a daily basis, including ensuring proper oil, coolant, and hydraulic fluid levels; that machine guards and doors are securely in place; checking for abnormal sounds; inspecting for leaks; ensuring cutting tools and holders are tight; and keeping the machine clean and lubricated. Operators and supervisors must sign off to verify that the daily checks were completed.

Uploaded by

Dilip Kumar K
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
You are on page 1/ 1

DAILY PREVENTIVE MAINTENANCE CHECK LIST FOR CNC MACHINE

Responsibility: Production staf Month : Machine : Doc no : VSPL_CNC_DPMCL_001-00


Check points Checking method 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31
Lubrication system visually
1 oil level mention actual value
visually
Hydraullic oil level mention actual value
2
visually
Coolant oil level mention actual value
3
Clamping Pressure of visually
4 chuck mention actual value
Check M/c gaurds &
visually
5 panel doors in position
Check for any
visually
6 obnarmal Sounds
Check & Arrest the Oil,
Coolant & Air Leakages
visually & manually
7
Tightness of cutting
visually & manually
8 tools and holders
Cleanliness of
visually & manually
9 slideways
Clean waste oil from
collection box near power visually & manually
10 pack

Clean the A/c water


collection Point & filter visually & manually
11
Check all lights &
alarm lamp are visually & manually
12 narmal
Apply the Grease for
visually & manually
13 Chuck Jaws 5 to 10 stroke
Clean the machine
visually & manually
14 thoroughly

Signature of the Operator

Signature of incharge

Prepared by : Ajith Checked by : Dilip Kumar K Approved by : Tejas Kumar S

You might also like