CIRCULAR
CLARIFIERS
A range of circular rotary clarifiers based on a
simple and well proven design. Used for separating
suspended solids from liquid streams in water,
sewage and industrial waste.
These units are available in two types, Bridge
Mounted (BM) and Column Mounted (CM)
They can be supplied for new installations or
retrofitted into existing concrete tank structures, and
can be purpose designed to suit individual
installations.
APPLICATIONS
Used both as a primary and secondary clarification in: -
Sewage Treatment Plants
Wastewater Treatment Plants
Industrial Effluent Waste Streams
BENEFITS & FEATURES
Efficient drive design means low energy cost and
ensures optimum performance
Heavy duty gearboxes result in long life Typical CM Clarifier Installation
Excellent reliability
Fully automatic operation
Low cost of maintenance
DRIVE DETAILS
CLARIFIER RANGE
Gearbox - Heavy Duty Worm Gearbox
The Clarifiers are available in a range of
sizes to suit a whole range of applications
MATERIALS OF CONSTRUCTION in the waste water industry.
Mild Steel and 304 St. St.
The BM Range with fixed access
Walkways are usually in Epoxy painted Mild Steel with walkway is designed for smaller tanks up
scraper and underwater parts in 304 stainless steel. 316 to 14.0m diameter.
SS can be supplied to special order.
The CM Range with rotating access
walkway is designed for large tanks up to
65.0m in diameter
These Clarifiers can usually be adapted
for retrofits or refurbishment projects. We
offer a full site survey service for both new
and retrofitting applications.
We offer a full installation and
commissioning service in UK and
overseas.
Smaller CM Type Installation
AT O N E W ITH WASTE WATE R TE C H N O LO GY
BM CLARIFIER RANGE
Primarily designed to meet the requirements for smaller units, up to 14.0m
diameter tanks. The unit comprises: -
Parallel beams spanning the tank support
A motorised gearbox drive unit with overload device
Sludge Removal Arms
The Feed-Zone
Motor control panel
Fixed access walkway
The rotating mechanism comprises of a centre shaft to which the rake arms, with
scraper blades, are attached. It is supported and rotated by a drive unit that
includes a heavy duty worm gear motor and drive chain. Te unit has a fixed
access walkway extending from the outer edge of the tank to the centre.
CM CLARIFIER RANGE
Suitable for tanks up to 65.0m diameter, the CM Clarifier is supported by a centre
column that carries the full operating torque of the unit. A stationary walkway
extending from the side of the tank to the centre column allows access for
inspection and maintenance of the drive unit.
Influent flows through the hollow centre column into the feed-zone, or from the top
of the feed-zone, by means of a pipe/channel supported from the bridge.
The sludge removal arms, with scraper blades and squeegees, are attached to a
centre cage that is fully supported from the rotating main gear drive.
When required either one or two surface skimmer assemblies, fully supported
from the arms, can be used to sweep surface scum into a scum box.
The unit comprises: -
Parallel beams spanning the tank support
A motorised gearbox drive unit with overload device
Balanced drive system
Sludge Removal Arms
The Feed-Zone
Motor control panel
©Copyright 2007 Stetfield Separators Limited Issue 01
CONSTRUCTION & OPERATION Stetfield Separators Limited
We can advise on the design and construction of the concrete Parkengue,
tank, giving critical dimensions necessary for successful Kernick Industrial Estate,
installation of the rotary clarifier. Penryn, Cornwall, TR10 9EP
United Kingdom
We can size the clarifier units against specific flows and solids Tel: +44 (0)13 2656 2635
loadings. Fax: +44 (0)13 2656 3316
Web Site: www.stetfield.com
We can supply, or advise on, complete sludge removal and email:
[email protected]pumping details for transfer to the next stage.
AT O N E W ITH WASTE WATE R TE C H N O LO GY
