SKF Bearing Select v1.
2-68
Rodamiento
Calculos
Manuel Arevalo y Juan Ross
Tecnologico
November 29, 2019
1. Abstract
Insert bearing
Static
Frictional Power
Designation Life model safety
moment loss
factor
SKF Explorer Basic SKF life Total
Popular item L10h L10mh S0 M Ploss
h Nmm W
1726207-2RS1 2870 35600 6.95 339 61
* SKF rating life ( L10mh ) for steel-steel bearings; GBLM load based life ( L10GMh ) for hybrid bearings
SKF Bearing Select 2 2019-11-29
This report was produced with SKF Bearing Select software. Please note the limited warranty, shown at the bottom of the last page of this report
® SKF is a registered trademark of the SKF Group. © SKF Group 2019.
2. Input
2.1. Bearing data
Bearing
Designation Principal dimensions Basic load ratings Fatigue load limit
type
SKF Explorer Dynamic Static
Popular item d D B C C0 Pu
mm kN
Insert
1726207-2RS1 35 72 17 25.5 15.3 0.655
bearing
Designation Speed ratings
Reference Limiting
nref nlim
r/min
1726207-2RS1 6300
SKF Bearing Select 3 2019-11-29
This report was produced with SKF Bearing Select software. Please note the limited warranty, shown at the bottom of the last page of this report
® SKF is a registered trademark of the SKF Group. © SKF Group 2019.
2.2. Loads, Speed and Temperature
Rotating ring Outer ring rotation
Forces Speed Temperature Case weight
Radial ( Fr ) Axial ( Fa ) Inner ring Outer ring
kN r/min °C
LC1 2.0 2.0 1700.0 70 65 1.0
- Maximum temperature is used for calculating the actual viscosity, kappa, aSKF and SKF rating life.
- Mean temperature is used for calculating bearing friction and power loss.
2.3. Lubrication
Effective EP
Designation Lubricant Viscosity
additives
SKF Explorer Name @40°C @100°C
Popular item mm²/s
1726207-2RS1 VT307 No 190 15
Designation Contamination
Method Cleanliness / Factor
Detailed
1726207-2RS1 High cleanliness
guidelines
SKF Bearing Select 4 2019-11-29
This report was produced with SKF Bearing Select software. Please note the limited warranty, shown at the bottom of the last page of this report
® SKF is a registered trademark of the SKF Group. © SKF Group 2019.
2.4. Fits and tolerances
Calculated Include
Designation Requirements Tolerance Class
interference Smoothing
SKF Explorer Guidance Housing Shaft
Popular item
1726207-2RS1 off N/A k6 Probable Yes
SKF Bearing Select 5 2019-11-29
This report was produced with SKF Bearing Select software. Please note the limited warranty, shown at the bottom of the last page of this report
® SKF is a registered trademark of the SKF Group. © SKF Group 2019.
3. Results
3.1. Loads & static safety
Static safety Equivalent dynamic
Designation Load ratio Equivalent static load
factor load
SKF Explorer
Popular item C/P S0 P P0
kN
1726207-2RS1 6.65 6.95 3.84 2.2
3.2. Bearing minimum load
Designation Reaction forces Minimum load
SKF Explorer Radial Axial met?
Popular item Fr Fa Fr m
kN
1726207-2RS1 2.0 2.0 0.25 yes
3.3. Lubrication conditions
Viscosity
Designation Operating viscosity
ratio
Rated @ 40
SKF Explorer Actual Rated
°C
Popular item ν ν1 νref K
mm²/s
1726207-2RS1 41.8 12.4 37.1 3.36
SKF Bearing Select 6 2019-11-29
This report was produced with SKF Bearing Select software. Please note the limited warranty, shown at the bottom of the last page of this report
® SKF is a registered trademark of the SKF Group. © SKF Group 2019.
3.4. Bearing rating life
SKF life modification
Designation Life model Contamination factor
factor
SKF Explorer Basic SKF
Popular item L10h L10mh askf ηc
1726207-2RS1 2870 35600 12.38 0.82
* SKF rating life ( L10mh ) for steel-steel bearings; GBLM load based life ( L10GMh ) for hybrid bearings
3.5. Bearing friction & power loss
Power
Designation Frictional moment Friction sources
loss
At start
SKF Explorer Total 20-30°C and Rolling Sliding Seals Drag loss
zero speed
Popular item M Mstart Mrr Msl Mseal Mdrag Ploss
Nmm W
1726207-2RS1 339 387 128 87.8 123 0 61
SKF Bearing Select 7 2019-11-29
This report was produced with SKF Bearing Select software. Please note the limited warranty, shown at the bottom of the last page of this report
® SKF is a registered trademark of the SKF Group. © SKF Group 2019.
3.6. Bearing frequencies
Designation Rotational frequencies
Rolling element set & Rolling element about its
SKF Explorer Inner ring Outer ring
cage axis
Popular item fc fr
Hz
1726207-2RS1 0 28.3 17.1 65.2
Designation Frequency of over-rolling
Point on inner Point on outer
Rolling element
ring ring
fip fep frp
Hz
1726207-2RS1 153 101 130
SKF Bearing Select 8 2019-11-29
This report was produced with SKF Bearing Select software. Please note the limited warranty, shown at the bottom of the last page of this report
® SKF is a registered trademark of the SKF Group. © SKF Group 2019.
3.7. Fits and tolerances
3.7.1. Tolerances
Designation Shaft outer diameter Bearing bore Bearing outer diameter
SKF Explorer Minimum Maximum Minimum Maximum Minimum Maximum
Popular item µm
1726207-2RS1 2 18 -12 0 N/A N/A
Designation Housing bore Smoothing
SKF Explorer Minimum Maximum Shaft and bearing bore Bearing outer ring and housing
Popular item µm
1726207-2RS1 N/A N/A 7 N/A
- For the tolerances calculation, the normal tolerance for the bearing bore and outer diameter is used.
3.7.2. Fits, Probable Interference (-) / Clearance (+)
Designation Shaft Housing
Probable Probable Probable Probable
SKF Explorer Middle Middle
minimum maximum minimum maximum
Popular item µm
1726207-2RS1 -1 9 19 N/A N/A N/A
SKF Bearing Select 9 2019-11-29
LIMITED WARRANTY : The SKF Bearing Select software tool of the SKF Company supports the calculation and selection of bearings.
This software is provided 'as is' with out any warranty of any sort, implicitly as well as explicitly.
Please note that the obtained results can be affected by many external parameters and/or the quality of the assumptions taken into account.
The results obtained using this software must be validated by the user who accepts the fact that the use of this software and the exploitation
of the obtained results are under the user's entire and sole responsibility.
® SKF is a registered trademark of the SKF Group. © SKF Group 2019.
