Scribd
Upload
286 views

Advanced CAD Practical File

The document describes experiments conducted using the Solidworks 3D CAD software. It summarizes key features and benefits like flexibility in design, extensive design possibilities, ability to adapt to modifications, and automatic creation of manufacturing and cost aspects. Procedures covered include starting Solidworks, sketching and dimensioning parts, exporting files, customizing interfaces, constructing machine parts like pistons and gears, assembly drawings, part drawings, and simulations for analysis. G-codes for machining operations are also developed.

Uploaded by

Jitender Kumar
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
286 views

Advanced CAD Practical File

The document describes experiments conducted using the Solidworks 3D CAD software. It summarizes key features and benefits like flexibility in design, extensive design possibilities, ability to adapt to modifications, and automatic creation of manufacturing and cost aspects. Procedures covered include starting Solidworks, sketching and dimensioning parts, exporting files, customizing interfaces, constructing machine parts like pistons and gears, assembly drawings, part drawings, and simulations for analysis. G-codes for machining operations are also developed.

Uploaded by

Jitender Kumar
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 31

EXPERIMENT: 01

AIM:-To studies the “Solid works” software.


Introduction:-
It is a tool to decrease design time scale and also optimize your
product development processes to implement remarkable design.
It is the best essential tool for 3D CAD. It is state of the software,
which promotes best practices in design.
Features and Benefits of Solid works:-
• Advanced 3D CAD software allows for remarkable flexibility
in design and manufacturing.
• Extensive scope of design possibilities enables faster
implementation of a new product.
• Capable of adopting to design modification.
• Automatic creation of related manufacturing and service aspects
of products development and cost.
• Decreases time needed for product development and controlling
cost.
Starting procedure of Solid works to draw part drawing:-
• Double click on Solid works icon shown a desktop.
• Select New.
• Click on Part→ OK.
• Now select plane at which we want to work.
• Click on sketch and draw part drawing.
Dimensions:- By using “Smart Dimension ”command, we can provide
dimensions to drawing.
EXPERIMENT: 02

AIM:- Exporting technique of solid works

PROCEDURE:-
First, orient the file in the view you want and from the Heads-up display
select the New View button to create and save a new view. Repeat this
step for all the views you will want in Illustrator.
Next, make a drawing from the model you are working with.

In the drawing, from the view palette you will see all the views you
saved available. Simple drag and drop the views onto your drawing
sheet.
Once you have all of your views on the sheet select a view and adjust
the Display Style to “Hidden Lines Removed”. Finally, at the bottom of
the menu you will see a “Save view as…” tab. Open that tab and you
will see a save icon that when you hover over it reads “Save View As
DXF/DWG”. Use this function to create a .dxf file of the view. Repeat
this for all the views you have created.

You can now bring all your .dxf files into Adobe Illustrator and if your
model changes in the future you can quickly and easily create updated
.dxf files for future use.
EXPERIMENT: 03

AIM:- Customization of Solid Works software

PROCEDURE:-
Customizing Solid Works User Interface
ADD-INS
Description: Enable or disable compatible Solid Works
applications/Tools.
Customize

Description: Customize toolbars, tools, keyboard shortcuts, mouse


gestures, and menus.
EXPERIMENT: 04
AIM:- Construct of simple machine parts like Piston, Pulley ,Spur
Gear ,Bolt ,Nut, connecting rod

Piston:-
• Take a New file.
• Select the Part and then OK.
• Select the plane at which we want to draw.
• Draw the sketch of piston by using sketch. We use “Line”
command to draw the sketch and the “Smart Dimension”
command to provide dimension as shown in fig.
• Take center line by selecting the “Center line ’command
along the axis and then OK.
• After center line, select revolve command icon and then click
on“Center line”. Then piston is formed.
Pulley:-
• Take a new File and select the Part and then OK.
• Select the plane and draw the sketch of pulley using “Line
’command with proper dimension shown in fig.
• Define center line using “centerline”’ command along the
axis and then OK.
• After center line , select revolve command icon and then OK
.Then pulley is for
Spur Gear:-
• Take a new file and select the part and then OK.
• Select the plane and then draw the sketch of spur gear by
using Circle ,line, Trim command with proper dimensions.
• Use pattern and array command and choose number of teeth.
• Use extrude command , select gear and then OK. Thus we
find a complete Gear as shows in fig.
Helical Spring:-
To make helical spring command used are sketch, sweep.
NUT:-

To make nut command used are sketch, extrude ,extrude cut, helical
curve.

Bolt:-

To make bolt, command used are sketch ,extrude ,extrude cut, Hoxton
curve.
CONNECTING ROD:-
EXPERIMENT: 05
AIM:-Assembly drawing of flange coupling.

A).PART-1
B).PART-2
C).PART-3
D).PART-4
ASSEMBLY:-
EXPERIMENT: 06
AIM:- Assembly drawing of pedestal bearing.

A).PART-1

B).PART-2
C).PART-3

D).PART-4
E).PART-5

ASSEMBLY
EXPERIMENT: 07
AIM:- To study and Generate the drawing of a part.

Go to file folder and then select drawing to generate drawing of a


part and select the size of sheet.
Now browse the part and create the top bottom and side view of a part
just click at top bottom and side of its view.
Give dimension using smart dimension command
EXPERIMENT: 08

AIM:- To study the analysis procedure for a simple part.

For this click on solid work simulation then select study adviser and
click on new study and give name to the study now select part and apply
material.
Now apply fixture to the part after applying fixture apply load to the
part and the click on run study.

Now here you can see stress concentration in the part as shown in fig.
EXPERIMENT: 09
AIM:- G and M codes development for machining operation
Procedure:

N01 G90 EOB


N02 G17 EOB
N03 M06 EOB
N04 M04 S1200
N05 G01 X27.5 Y-7.5 F30 EOB
N06 G01 Z-5.6 EOB
N07 L601 EOB
N08 Z-6.3 EOB
N09 L601 EOB N140 M17 EOB
N010 Z-7.0 EOB
N011 L601 EOB
N012 Z5 EOB
N013 GO X0 Y0 EOB
N014 M05 EOB
N015 M30 EOB

RESULT:-

Thus the given job is manufactured

You might also like