PANTS F IT TING BAS ICS

Simple adjustments for beautifull y

fitting pants & trousers
TA B L E O F C O N T E N T S

Pants Fitting Worksheet page 3

How to Assess Pants Fit page 4

Shorten Crotch page 5

Lengthen Crotch page 6

Round Pubis page 7

Flat Pubis page 8

Full Tummy page 9

Full Seat page 10

Flat Seat page 11

Low Seat page 12

Gaping Waistband page 13

Gaping Back page 14

Swayback page 15

Thin Thigh page 15

Full Thigh page 16

Thin Thigh page 17

Full Calf page 18

Knock Kneed page 19

Bowlegged page 20

Pants Fitting Guide | C L O S E T C A S E PAT T E R N S 2

PA N T S F I T T I N G WO R K S H E E T
F IT T I N G O BS ERVAT IONS DETAILS
Try on your pants and draw any drag lines or fit issues you seee on the pants
below to help you diagnose the source of the problem. Pattern:
Size:

F IT ADJUSTMEN TS
Front Adjustments

Crotch too long

Crotch too short
Round pubis
Flat pubis
Full tummy

Back Adjustments

Full seat
Flat seat
PAT T ERN M O DIFICAT IONS Low seat
Draw and note any necessary adjustments here before adjusting pattern pieces. Swayback
Gaping
Waistband

Leg Adjustments
CB
Full thigh
Thin thigh
Back leg
Front leg Full calf
Knock-kneed
Bow-legged

Other / Notes

Pants Fitting Guide | C L O S E T C A S E PAT T E R N S 3

H O W T O A S S E S S PA N T S F I T

1. Print the Pants Fitting Worksheet.

2. Assemble your basted pants. Make sure the waistband and facing are
basted together and sewn to the waist of the pants. This ensures you
are studying the fit of the waistband, and also not stretching out the
waist opening of your pants.
3. Stand in front of a full-length mirror in good lighting, feet hip-width
apart. Look at the front first. Are there any drag lines along the abdo-
men, crotch, thighs or knees? Does anything feel tight or uncomfortable
anywhere?
4. Bend over and squat down. Is the rise high enough for you?
5. Look at the back with a hand mirror, or better yet, have someone take a
picture of you. Note any drag lines or feelings of tightness or looseness.
6. Take pictures of the front, side and back with your crotch more or less
at eye level.
7. Using the worksheet, draw any drag lines you see on the drawing of the
pants, however minor. Make notes to capture any initial observations
you have.
8. Study the following diagrams to see what fit issues you may be having.
9. Check off the corresponding adjustment on the worksheet and draw the
adjustment you will make to the mini pattern pieces.
10. Make corresponding adjustments to actual paper pattern pieces.
11. Adjust muslin or fashion fabric you’ve cut out; many adjustments can
be made to the original fabric, but anything involving a wedge added or
removed (ie. a full tummy or flat seat adjustment) will require new pat-
tern pieces to be cut out.
12. Re-baste and try on. Take more photos so you can study the improve-
ments.
13. Repeat as needed, or take a breath and say “Good enough!”, and get
cracking on your final pants.

Pants Fitting Guide | C L O S E T C A S E PAT T E R N S 4

Front adjustments
SHORTEN CROTCH

SYM PTO M : SOLUTION:

Drag lines radiating downwards from front Remove width from the inseam (or front thigh)
crotch, resembling a frown. to shorten front crotch curve. Work in 1/4”
increments since small adjustments make a big
difference. Smoothly join your new inseam line
into mid thigh with a french curve or ruler.

Pants Fitting Guide | C L O S E T C A S E PAT T E R N S 5

Front adjustments
LENGTHEN CROTCH

SYM PTO M : SOLUTION:

Drag lines radiating upwards from front Add width off to inseam (or front thigh) to
crotch, resembling a smile. Crotch will feel lengthen front crotch curve. Work in 1/4”
tight. increments since small adjustments make a big
difference. Smoothly join your new inseam line
into mid thigh with a french curve or ruler.

Pants Fitting Guide | C L O S E T C A S E PAT T E R N S 6

Front adjustments
ROUND PUBIS ( AKA CAMEL TOE)

SYM PTO M : SOLUTION:

Vertical drag lines around the front crotch Scoop out front crotch curve. This deepens the
seam. Seam digs into pubic area. curve and creates room for the pubis. Work in
1/4” increments since small adjustments make
a big difference.

Pants Fitting Guide | C L O S E T C A S E PAT T E R N S 7

Front adjustments
F L AT P U B I S

SYM PTO M : SOLUTION:

Horizontal wrinkles at the front crotch may Draw in a shallower front crotch curve; this
indicate that your pubic bone is a little flatter flattens the curve. A 1/4” or 1/8” adjustment
than what is drafted for. Many horizontal can make a big difference.
lines spanning the width of the hip indicate
that pants are too tight at the hip, so if it feels
too snug try letting out the hip first before
attempting this adjustment.
Pants Fitting Guide | C L O S E T C A S E PAT T E R N S 8
Front adjustments
FULL TUMMY

SYM PTO M : SOLUTION:

A full tummy may create diagonal drag lines To correct, slash along the center front to the
radiating from your stomach. The side seams hip and rotate along a “hinge” to add length
may also come forward around the stomach, and width through the abdomen area. You
along with a little tightness in the crotch. may also find you need to add a little length to
the crotch curve by letting out the inseam.

Pants Fitting Guide | C L O S E T C A S E PAT T E R N S 9

Back adjustments
F U L L S E AT

SYM PTO M : SOLUTION:

If you have a fuller bottom, you may notice Option #1: You need to add length to the back
drag lines all pointing to the back crotch seam. seat curve to make room. The proper method
The back waistline may also be tugged down is to cut through the center back seam to the
so it sits too low at the small of your back - hip and rotate along a “hinge” to add length
this is very common with rounder bums. and width through the seat.
Option #2: A quicker method is to add a little
to the inseam and top seam as indicated above.
You may also find that you need a deeper seat
curve – if you scoop out that curve more, please
note you will have to add a little to the hip since
you are removing width across the hip with this
adjustment.
Pants Fitting Guide | C L O S E T C A S E PAT T E R N S 10
Back adjustments
F L AT S E AT A N D / O R T H I N T H I G H

SYM PTO M : SOLUTION:

Bagginess under the bum with diagonal drag Fast method: Remove length from the back
lines pointing up to the hip indicate either a) seat curve. Start by taking in the inseam.
the upper thigh of the pant is too roomy or
b) the seat is flatter than what the pattern was Proper method: Cut through the center back
drafted for. seam to the hip and rotate down along a
“hinge” to remove length and width through
the seat.

Pants Fitting Guide | C L O S E T C A S E PAT T E R N S 11

Back adjustments
L O W S E AT

SYM PTO M : SOLUTION:

If the curve of your bum sits a little lower To remove drag lines, scoop out the seat curve
than the pant has been drafted for, you’ll find so it makes more of an “L” shape. This will
horizontal drag lines under your seat and make room for the lower curve of your seat.
excess fabric at the crease of your bum and
legs.

Pants Fitting Guide | C L O S E T C A S E PAT T E R N S 12

Back adjustments
G A P I N G WA I S T B A N D

Waistband adjustment

SYM PTO M : SOLUTION:

Waistband (and possibly the yoke) gape You must remove length from the top
against lower back. Pinch out excess with a waistband edge so it sits closer to the body.
pinned dart so you know how much you need Note the width of the dart you made and cut
to remove. and hinge your waistband between side seam
and center back to remove width to top seam
only. Your waistband will now have a more
pronounced curve.

Pants Fitting Guide | C L O S E T C A S E PAT T E R N S 13

Back adjustments
GAPING BACK

SYM PTO M : SOLUTION:

Pant gapes against lower back, below Option #1: Try to correct gaping by sewing a
waistband. Pinch out excess with a pinned deeper dart. If more width needs to be removed,
dart so you know how much you need to take from center back seam, changing angle of
remove. back crotch seam.
Option #2: cut from back crotch seam to hip
and leave a hinge. Rotate in top of back leg
at hip hinge. Redraw center back crotch seam
so the angle is the same before you rotated it.
This method removes width at hip and height
at the small of the back.
Pants Fitting Guide | C L O S E T C A S E PAT T E R N S 14
Back adjustments
S WAY B A C K

SYM PTO M : SOLUTION:

Pants pool with horizontal lines below Option #1: Remove height along top of pant,
waistband and above seat. This indicates a grading to nothing at hip.
hollow at the small of the back, with a shorter
depth between hip and waist. Option #2: Cut through the center back seam
to the hip and rotate down along a “hinge” to
remove length through the seat.
Option #3: Try sewing deeper darts.

Pants Fitting Guide | C L O S E T C A S E PAT T E R N S 15

Back adjustments
FULL THIGH

SYM PTO M : SOLUTION:

If you need more room in the thigh, your Extend your back crotch at the inner thigh to
pants will tell you with diagonal drag lines give yourself more room.
or wrinkles pointing towards your crotch
inseam.

Pants Fitting Guide | C L O S E T C A S E PAT T E R N S 16

Front and back adjustments
THIN THIGH

SYM PTO M : SOLUTION:

If the thighs are too roomy, you may see Taking width off the back inseam will help; you
vertical drag lines along the back of your may also need to remove a little from the front
thigh. Sometimes a thin thigh adjustment inseam as well.
resembles a flat seat adjustment with diagonal
drag lines pointing up to the hip.

Pants Fitting Guide | C L O S E T C A S E PAT T E R N S 17

Leg adjustments
FULL CALF

SYM PTO M : SOLUTION:

Horizontal drag lines above the back of your Cut your pattern as indicated above, and hinge
knees along with a snug fit through the calf seams along the lower leg to create more width
indicate the need for a full calf adjustment. along the back of the calf. This will widen the
ankle opening. If you prefer a skinnier fit, you
If the calf does not feel too tight, try a may want to try taking in the side seams below
low seat adjustment first - sometimes scooping your calf to taper the ankle opening.
out the seat curve can eliminate horizontal
lines above knee. Pants Fitting Guide | C L O S E T C A S E PAT T E R N S 18
Leg adjustments
KNOCK KNEED

SYM PTO M : SOLUTION:

If you’re a little knock kneed you may find You need a little more length at the inseam and
that the fabric is tight along your inseam and a little less at the side seam. To achieve this,
looser at your side seam. You’ll see diagonal slash to a center point in the center of the thigh
drag lines radiating from along the side seam on either side and rotate the entire upper pant
above and below the knee. so that you are reducing the length along the
side seam while slightly adding to the inseam.

Pants Fitting Guide | C L O S E T C A S E PAT T E R N S 19

Leg adjustments
BOW LEGGED

SYM PTO M : SOLUTION:

You’ll notice drag lines radiating out from the The exact opposite adjustment we made for
inseam around your knee and calf. the knock kneed; you need more length on the
side seam and less on the inseam. To achieve
this, slash to a center point in the center of the
thigh on either side and rotate the entire upper
pant so that you are adding to the length of
the side seam while reducing the length of the
inseam.
Pants Fitting Guide | C L O S E T C A S E PAT T E R N S 20