Scribd
Upload
161 views

Adafruit Trinket M0

This document provides specifications for the Trinket M0 microcontroller board. It includes a pinout diagram showing the functions of each pin including power, serial, interrupt, port and analog pins. It also provides current limits for the different power groups and pins to prevent overdrawing current. Guidelines are given for connecting the USB power and battery inputs and using the GPIO pins within the 3.3V rating.

Uploaded by

Buzatu Giani
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
161 views

Adafruit Trinket M0

This document provides specifications for the Trinket M0 microcontroller board. It includes a pinout diagram showing the functions of each pin including power, serial, interrupt, port and analog pins. It also provides current limits for the different power groups and pins to prevent overdrawing current. Guidelines are given for connecting the USB power and battery inputs and using the GPIO pins within the 3.3V rating.

Uploaded by

Buzatu Giani
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Trinket M0 DotStar LED

Optional JST battery connector


1 PA00 EINT0 S1:0 7 DI
2 PA01 EINT1 S1:1 8 CI

Flash Access

31 PA30 EINT10 S1:2 19 SWCLK


32 PA31 EINT11 S1:3 20 SWDIO

Back Side

Power Serial PIN


GND PIN Function
Physical PIN Interrupt PIN
Port PIN Control PIN USB Connector
Micro Type B
Analog PIN IDE

PWM Pin 13 PA10 EINT10 I2SCK S2:2 AIN18 13

18B
Port power group

ADAHBA PH
636 D ARM
ATSAMD21
VBAT VBUS

E18A-U
GND 11 PA08 I2SD1 S2:0 SDA AIN16 0 A2
4 A4 AIN6 TOUCH MOSI TX S0:2 EINT6 PA06 7 3 PA02 EINT2 DAC TOUCH AIN0 1 A0
3 A3 AIN7 TOUCH SCK RX S0:3 I2SD0 EINT7 PA07 8 12 PA09 EINT9 I2SMC S2:1 SCL MISO AIN17 2 A1
RESET 26 3V3

RESET

The total current of each port VBUS Connected to 5V USB Port


power group should not exceed 65mA Absolute MAX 500mA

Absolute MAX per pin VBAT Positive voltage


10mA, 7mA reco��ended from the JST Batt jack

3V3 3V3 output from regulator


Absolute MAX 130mA for
Absolute MAX 500mA
the entire package

GPIO pins rated for 3.3V


Never connect them to 5V signals

https://www.adafruit.com/product/3500 12 SEP 2017


ver 1 rev 0

You might also like