Scribd
Upload
176 views2 pages

TDS Dulux Gloss

Dulux Gloss is a premium alkyd paint with excellent flow and durability. It provides a tough, glossy finish suitable for interior and exterior concrete, metal, and wood surfaces. Key benefits include excellent flow, high opacity, and durability. It has a high spreading rate and is resistant to mild chemical and heat exposure. Surface preparation is required and two coats are recommended for best coverage and protection.

Uploaded by

pastorgee
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
176 views2 pages

TDS Dulux Gloss

Dulux Gloss is a premium alkyd paint with excellent flow and durability. It provides a tough, glossy finish suitable for interior and exterior concrete, metal, and wood surfaces. Key benefits include excellent flow, high opacity, and durability. It has a high spreading rate and is resistant to mild chemical and heat exposure. Surface preparation is required and two coats are recommended for best coverage and protection.

Uploaded by

pastorgee
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

TECHNICAL DATA SHEET 201

DULUX GLOSS
DESCRIPTION Dulux Gloss is a premium quality, hard wearing alkyd paint with excellent flow
and a highly durable finish

TYPICAL USES Suitable for decoration and protection of interior/exterior concrete, metal and wood surfaces
requiring a tough, durable gloss finish

KEY BENEFITS Excellent Flow


High Spreading Rate
Excellent Durability
High Opacity

PRODUCT INFORMATION

Composition
Pigment: Lightfast Non-Lead Pigments
Binder: Alkyd
Solvent: Aliphatic Organic Solvent

Pack Size: 4L
Colour Range: Refer to the appropriate Colour Guide
Finish: Gloss
Volume Solids: 50-55%
Theoretical
Spreading Rate: Up to 18sq.meter per litre on a smooth, non-porous surface

Drying Information Depends on prevailing temperature and humidity


Touch Dry: 3-4hrs
Recoat: 4-6hrs
Hard Dry: 16-24hrs

Opacity: 2 coats

Film Properties
Chemical Resistance: Resistant to mild chemical fume attack
Heat Resistance: Usually unaffected up to 80oC. Some discoloration may occur at elevated temperatures
for pastel shades
Water Resistance: Withstands levels of atmospheric humidity present in normal interior and exterior
environments and will withstand repeated washing. Not suitable for continuous
immersion.
Film Thickness (Wet): 75 microns

APPLICATION INFORMATION

Method of Application: Brush or roller.

Coverage: Up to 18sqm per litre on non- porous surface can be achieved under normal conditions

Thinning
Brush/Roller: Stir well before application by brush or roller. Apply from container
Conventional Spray: For health and safety reasons relating to solvent based paints, spray application is not
recommended

Cleaning Up: After use, remove as much product as possible from application equipment before cleaning with
Dulux Thinner 41. If you have left over paint, dispose of it responsibly.
SYSTEMS AND COMPATIBILITY

Stir thoroughly before use. The normal finishing process is 2 coats of Dulux Gloss after priming.

Note that due to the nature of alkyd solvent based paints, white and some pastel shades will discolour over time
especially when applied in areas with low or no natural or UV light

SURFACE PREPARATION

Surfaces must be clean and dry before painting. All surfaces must be clean and free from grease, oil and other
contaminants. Remove all dirt, grease, loose or flaking paint, rust and oxide deposits. New or bare surfaces should
be primed with appropriate primer. Previously painted surfaces should be thoroughly rubbed down and wiped off
with a damp, lint-free cloth to avoid dust.

SAFETY INFORMATION

For detailed safety information, refer to the Material Safety Data Sheet

ADDITIONAL INFORMATION

Storage and Transportation:

Do not use or store in extreme temperatures.

Store in a cool, dry, well ventilated place protected from moisture, away from sources of heat, ignition and direct
sunlight. Containers which are opened should be properly resealed and kept upright to prevent leakage. Do not use
or store any paint container by hanging on a hook. Store separately from oxidizing agents, strongly alkaline
materials, strongly acidic materials, amines, alcohols and water

To prevent spillage, store and transport upright

FURTHER SUPPORT

If you need further support, please contact Chemical & Allied Products Plc on 07098733733

Company Disclaimer: The information contained in the technical data sheet is believed to be accurate and true at the date of issuance but
are subject to change without prior notice. We guarantee our product to conform to the specifications contained herein, however we make no warranty
of merchantability or any other warranty, express or implied, with respect to such information, and liability (if any) resulting from its use is limited to
replacement of the product. In no event shall CAP Plc be liable for any claims, losses, or damages of any third party or for lost profits, labour cost or
any special, indirect, incidental, consequential or exemplary damages, howsoever arising even if CAP Plc has been advised of the possibility of such
damages

ISSUED: 01/16

You might also like