BP5136H

High Voltage Linear LED Driver

Description Features
BP5136H is a high current precision Linear LED  High integration，all SMTs in small size.
Driver ， integrated with High Voltage regulation  No ECAPs and magnetics
switchers and JFET supply, specially designed for  Integrated with 700V/500V HV MOS, saved
AC line LED strings forwarded with high voltage on safety components.
 Align working with ±20% tolerance on line
and low current.
voltage;
In application, it supports a quite small BOM  Fast startup
benefit from no ECAP and no Magnetics, compile  LED current set by external resistors with ±5%
accuracy.
with EMI and safety standard.
 Programmable thermal regulation.
BP5136H can drive precision constant current by  Compensation for line regulation
option of an external resistor, and set up the LED  In SOP8-EP package.
strings in group linear compile with THD
performance. Typical 40mA LED current is Application
optimized for 220V line voltage. BP5136H support
thermal regulation by an external resistor to  GU10/E27 LED retrofit lamps
prevent over driving in high input voltage.  LED candle
 Other LED lighting
BP5136H invite an external resistor to fulfill the
line regulation and adjust the output current
following input voltage.

Typical Application

AC BP5136H
1 CS D1 8

2 RTH D2 7

3 GND D3 6

4 VD D4 5

RCS

RD

Fig.1 BP5136H Typical Application

BP5136H_CN_DS_Rev.1.1 www.bpsemi.com 1
Bright Power Semiconductor Co. Confidential – Customer Use Only
 BP5136H
High Voltage Linear LED Driver

Order Information

Part Number Package Temperature Packing Method Mark

Tape BP5136H
BP5136H SOP8-EP -40 ℃ to 105 ℃ XXXXXY
4,000 pcs/reel XYY

Pin mapping

CS D1
BP5136H
XXXXXY
RTH D2
XYY

GND D3 XXXXXY: lot code

X: year
VD D4
YY：week

Fig 2 Pin Mapping

Pin Descriptions
Pin No. Pin Name Descriptions

1 CS Current sense，connect the current sense resistor to GND

2 RTH Thermal regulation，need connect resistor to GND

3 GND IC ground

4 VD Drain Voltage, need connect resistor to Drain Pin

5 D4 Drain for LED string4

6 D3 Drain for LED string3

7 D2 Drain for LED string2

8 D1 Drain for LED string1

BP5136H_CN_DS_Rev.1.1 www.bpsemi.com 2
Bright Power Semiconductor Co. Confidential – Customer Use Only
 BP5136H
High Voltage Linear LED Driver

Absolute Limit (Note1)

Symbol Parameter Range Unit

D1，D2 700V HV interface 700 V

D3，D4 500V HV interface 500 V

CS,RTH,RD Low voltage pins -0.3~6 V

PDMAX Power dissipation (note 2) 1 W

θJA Thermal Resistor 60 ℃/W

TJ Junction Temperature -40 to 150 ℃

TSTG Storage temperature range -55 to 150 ℃

ESD (Note 3) 2 kV
Note 1:Stresses beyond those listed under “absolute maximum ratings” may cause permanent damage to the device. Under “recommended operating

conditions” the device operation is assured, but some particular parameter may not be achieved. The electrical characteristics table defines the operation

range of the device, the electrical characteristics is assured on DC and AC voltage by test program. For the parameters without minimum and maximum

value in the EC table, the typical value defines the operation range, the accuracy is not guaranteed by spec.

Note 2:The maximum power dissipation decrease if temperature rise, it is decided by TJMAX, θJA, and environment temperature (TA). The maximum power

dissipation is the lower one between PDMAX= (TJMAX-TA)/ θJA and the number listed in the maximum table.

Note 3:Human Body mode, 100pF capacitor discharge on 1.5kΩ resistor

Recommendation for operation condition

Symbol Parameters Range Unit

ILED LED output current @220V <40 mA

ILED LED output current @110V <80 mA

BP5136H_CN_DS_Rev.1.1 www.bpsemi.com 3
Bright Power Semiconductor Co. Confidential – Customer Use Only
 BP5136H
High Voltage Linear LED Driver

Electrical Characteristics (note4, 5) （unless specified, otherwise TA =25 ℃）

Symbol description Test condition Min. Typ. Max. UNIT

Operation Current

ICC Operation current D1=30V 80 110 uA

Current Sense

VREF1 Ref. for string1 D1=30V，Rcs=120Ω 645 mV

D1，D2=30V，
VREF2 Ref. for string2 725 mV
Rcs=120Ω
D1，D3=30V，
VREF3 Ref. for string3 805 mV
Rcs=120Ω
D1，D4=30V，
VREF4 Ref. for string4 890 mV
Rcs=120Ω
Thermal Regulation
Threshold
VRTH 1.0 V
voltage
Thermal
TREG RTH pin open 140 ℃
Regulation
Note 4:production testing of the chip is performed at 25°C.

Note 5:the maximum and minimum parameters specified are guaranteed by test, the typical value are guaranteed by design, characterization and statistical

analysis

BP5136H_CN_DS_Rev.1.1 www.bpsemi.com 4
Bright Power Semiconductor Co. Confidential – Customer Use Only
 BP5136H
High Voltage Linear LED Driver

Block Diagram

GND 3 VREF1
CC
Control 8 D1
Module_1

Ref.
Control
VREF2
CC
Control 7 D2
Module_2

VREF3
CC
Control 6 D3
RTH 2 Thermal Module_3
Regulation

VREF4
VD 4 Compensation CC
Control 5 D4
Module_4

CS 1

Fig3 BP5136H Block Diagram

forward voltage of summary all strings should

Application Information match the input voltage, like 110V and 220V
BP5136H is designed for linear driving LED respectively.
strings with high forward voltage low LED current
3 Current configuration
in line condition.
BP5136H supports high precision LED current
1 Supply
set by external resistors.
After system power on, the chip is supplied by
Current for each string defined as：
JEFT through D1, starting work once voltage on
D1 above 10V.
Vrefn
I LED _ n 
2 Operation principle Rcs
BP5136H auto adjust the LED strings in working here，n=1,2,3,4 refer to the different Reference
according to line voltage and extend the LED Voltage for each string.
working slots in every main cycles with purpose
As recommended, as application case of 220V
of output lm maintenance and LED availability
line condition, set the LED less than 40mA
improvement. For different application, the
depend on thermal capability of heatsinking.

BP5136H_CN_DS_Rev.1.1 www.bpsemi.com 5
Bright Power Semiconductor Co. Confidential – Customer Use Only
 BP5136H
High Voltage Linear LED Driver
4 Thermal regulation PCB Layout design
BP5136H has thermal regulation available to Suggestion for BP5136H PCB layout：
balance the power delivering and temperature
increasing. To improve the system reliability, the GND
output current to be regulated lower down refer Use the trace for current sense resistor as short
to the junction temperature. as possible. Extend the copper area for each
BP5136H has RTH pin available for thermal Drain Pin to improve good thermal condition.
regulation by external resistor and the Heat sinking
temperature threshold of thermal regulation BP5136H adopted SOP8-EP package to
adjusted in same tend then. As default of RTH strengthen the thermal dissipation, so that
pin open, the Voltage limit on RTH pin is 1.0V and connect explore pin to GND for further.
the temperature threshold of thermal regulation
is 140℃.
140

128

116

104
regulation(℃)

92
Thermal

80
10 50 90 130 170 210

RTH resistor (K Ohm)

Fig4 Co-Relationship between thermal

regulation and RTH resistor value

4 Compensation for line voltage

When LED string4 on, in order to save the power

loss, the system is to decrease the LED current
following voltage on D4 pin. The decreased value
is defined as:

1.6k
VREF 4  0.9  * VD 4
RD

BP5136H_CN_DS_Rev.1.1 www.bpsemi.com 6
Bright Power Semiconductor Co. Confidential – Customer Use Only
 BP5136H
High Voltage Linear LED Driver

Package

BP5136H_CN_DS_Rev.1.1 www.bpsemi.com 7
Bright Power Semiconductor Co. Confidential – Customer Use Only