Scribd
Upload
16 views

Design Formulae For Rectangular Section

This document provides design calculations for a rectangular reinforced concrete beam section. The key parameters and results are: - Beam dimensions are 40 cm width and 152.4 cm height - Longitudinal reinforcement is 8 bars of 25 mm diameter (#8 bars) - Shear reinforcement is not required as the shear stress of 12.04 kg/cm2 is less than the permissible shear stress of 14.04 kg/cm2 - Check of deflection shows the span of less than 45.67 m is allowed - Reinforcement details are provided for longitudinal bars and shear stirrups

Uploaded by

Khan Engr
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
16 views

Design Formulae For Rectangular Section

This document provides design calculations for a rectangular reinforced concrete beam section. The key parameters and results are: - Beam dimensions are 40 cm width and 152.4 cm height - Longitudinal reinforcement is 8 bars of 25 mm diameter (#8 bars) - Shear reinforcement is not required as the shear stress of 12.04 kg/cm2 is less than the permissible shear stress of 14.04 kg/cm2 - Check of deflection shows the span of less than 45.67 m is allowed - Reinforcement details are provided for longitudinal bars and shear stirrups

Uploaded by

Khan Engr
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
You are on page 1/ 1

Design formulae for rectangular section : -

b3 As' = 3 Y 25
M= 159.39 ( m.t )
V= 71.00 t
T= 0.00 ( m.t )
b= 40.00 ( cm )
H= 152.40 ( cm ) H = 152.399 cm
d' = 4.00 ( cm )
Fcu = 300.00 ( Kg/cm2)
Fy = 4200.00 ( Kg/cm2) As = 8 Y 25
K' = 0.156 b = 40 cm
K = M/(Fcu*b*d^2) = 0.060 <=K' Span not exceed 45.67 m
No Comp. Steel is required : -
Z= 137.68 ( cm )
X= 23.82 ( cm )
Asr' = 0.00 ( cm2 )
Asr = 31.68 ( cm2 )
Dim of As'p ( mm ) = 25 Nreq.= 0 bars
Dim of Asp ( mm ) = 25 Nreq.= 7 bars
F ( As' ) = 25 N ( As' ) = 3 & F ( As' ) = 16 N ( As' ) = 0
F ( As ) = 25 N ( As ) = 8 & F ( As ) = 25 N ( As ) = 0
As'p = 14.72 ( cm2 )

Asp = 39.26 ( cm2 )


Check of Deflection : -
L/d = 20.0 ( allowable span/effective depth ratio )
Fs = 211.84 (N/cm2)
mf1 = 1.395
mf2 = 1.074
L<= 45.67 (m)
Check of Shear : -
v= 12.04 kg/cm2 Vt= 0.00 N/mm2 T+V= 1.20 < 5
100*As/bd= 0.67 Ast/sv = 0.00 N/mm
vc = 5.86 kg/cm2
v - vc = 6.18
vc + .4 = 9.86 kg/cm3
Asq/sv = 0.676244 N/mm

Ast/sv +Asq/sv= 0.68 N/mm2


SV= 10 Cm
F= 12 mm
1.5 NO OF LEG= 0.597931
2 L Y 12@10 cm

You might also like