Scribd
Upload
186 views

KBTM4

KBT M4 is a nut driver operated stud type terminal block that provides a secure electrical connection. It has a polyamide 6,6 housing, stud type connection, is nut driver operated, and DIN rail mounted. It can accommodate conductors from 10 square mm to 8 AWG and is approved for 1000V, 57A use with a tightening torque of 1.2 Nm. Accessories include shorting links, end clamps, end plates, group marking carriers, and mounting accessories.

Uploaded by

Shaswat Jha
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
186 views

KBTM4

KBT M4 is a nut driver operated stud type terminal block that provides a secure electrical connection. It has a polyamide 6,6 housing, stud type connection, is nut driver operated, and DIN rail mounted. It can accommodate conductors from 10 square mm to 8 AWG and is approved for 1000V, 57A use with a tightening torque of 1.2 Nm. Accessories include shorting links, end clamps, end plates, group marking carriers, and mounting accessories.

Uploaded by

Shaswat Jha
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 5

KBT M4

GENERAL DESCRIPTION

KBT M4 is a Nut driver operated Stud Type Terminal Block and its one of the most secured type
connection ever.

WIRE TERMINATION TECHNOLOGY APPROVALS

Stud - Nut Driver Operated

PRODUCT FEATURE

1. Polyamide 6,6 Housing


2. Stud Type Connection
3. Nut Driver Operated
4. DIN Rail Mounted

TECHNICAL DATA
GENERAL

No of Levels 1

No of Connection 2

GREY,KHAKHI,RED,YELLOW,BLUE,BLACK,GREEN,
Colours

Insulation Material Polyamide 66

impulse Withstand Voltage 8

Pollution Degree 3 (IEC 60947-1)

Insulation Material Group I

Nominal Voltage(V) 1000 V

Nominal Current(A) 57 A

Width (In mm) 50 mm

Height (In mm) 41.4 mm

Conductor Cross Section (In sq mm) 10 sq mm

AWG Conductor Cross Section Min: 14 AWG Max: 8 AWG

Stripping Length (In mm) -- mm

Screw Thread M4

Tightening Torque /Rated Torque (in Nm) 1.2 Nm

KEY COMMERCIAL DATA

Standard Packing 50

Weight/Package 0.93

Custom Tariff No 85389000

Country of Origin India


ACCESSORIES

Comb-type Shorting Link

KSL4

End Clamp

SCUN

SCUSL

SCUDD

SCKN

DCKN

SCUN

SCUSL
ACCESSORIES

SCUDD

SCKN

DCKN

End Plate

KPS4

Group Marking Carrier

SCKNMLH

SCUNMLH

DCKNMLH

Marking Label

LABEL KN6.5
ACCESSORIES

Mounting Channel

CHS10

CHK10

CHKS10

CHKDS10

CHKD10

Partition Plate With Foot

KBXF

Protection Cover

PCC3

PCCM26 K
ACCESSORIES

PCCM39 K

You might also like