Scribd
Upload
206 views

Solving Thermodynamics Problems PDF

1. The document outlines a 12-step procedure for solving thermodynamics problems, beginning with summarizing given data and identifying the problem, then applying conservation of mass and energy to define the system and solve for desired quantities. 2. Key steps include fixing known states on pressure-volume or temperature-entropy diagrams, using conservation equations, and consulting provided tables and models to determine properties and solutions. 3. Appendices include common heat and work transfer equations, steady flow device assumptions, and substance modeling approaches like property tables, incompressible liquids/solids, and ideal gas approximations.

Uploaded by

Paul Guisando
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
206 views

Solving Thermodynamics Problems PDF

1. The document outlines a 12-step procedure for solving thermodynamics problems, beginning with summarizing given data and identifying the problem, then applying conservation of mass and energy to define the system and solve for desired quantities. 2. Key steps include fixing known states on pressure-volume or temperature-entropy diagrams, using conservation equations, and consulting provided tables and models to determine properties and solutions. 3. Appendices include common heat and work transfer equations, steady flow device assumptions, and substance modeling approaches like property tables, incompressible liquids/solids, and ideal gas approximations.

Uploaded by

Paul Guisando
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 3

Solving Thermodynamics Problems

Solving thermodynamic problems can be made significantly easier by using the


following procedure:
1. Summarize given data in own words, leave out unneeded information
2. Clearly understand/identify what is being asked for – draw a sketch showing
interactions/states and identify a solution strategy. Keep in mind that a multi-
step approach may be the easiest
3. Define system boundaries, noting if it is an open or closed system
4. Fix the known states on a P-v/T-v/T-s diagram, using given information
5. Apply conservation of mass to process
 For a control mass/closed system:
m 2  m1  0
 For a control volume/open system:
dm
 m
 i m
e
dt
6. Apply conservation of energy to process (1st law of thermodynamics)
 For a control mass/closed system:
E  Q  W (equilibrium process)

dE  
QW
dt (rate form)

 For a control volume/open system:


dE CV  V2   V2 
 Q  W   mi  h 
 
 gz    mo  h   gz 
dt  2  in  2  out
7. Solve algebraically for desired quantity using combination of mass balance,
energy balance, and definitions (like mass flow rate, volume, etc.)
8. Perform heat transfer analysis to get Q, if necessary (use catalog of heat
transfer or steady flow device in appendix)
9. Perform work analysis to get W, if necessary (use catalog of work or steady
flow device in appendix)
10. Find properties using Tables or models, such as ideal gas relationship
11. Substitute numbers into equation and solve for desired quantity

M. Bahrami ENSC388, Help Session 1


12. Sanity check magnitude of answer and direction (if any) to see if the solution
“makes sense”.
Appendix
This appendix contains a series of Tables for common parameters that are
needed in solving thermodynamics problems. The user should consult the
Cengel book details.
Heat Transfer

Heat Transfer Mode Equation


Conduction (Fourier’s Law)   kA dT
Q
dx
Convection (Newton’s Law) Q  hA Twall  Tambient 

Radiation Q 1 2 
  F A T 4  T 4
1 2 

Work

Work Mode Equation

Electric W  VIt
Spring
W
1
2

k x 22  x12 
Expansion/Compression W   PdV

Steady Flow Devices

Device Conversion Process Typical Assumptions


 Nozzle  Flow energy(T, P) to KE S.S., adiabatic, no work,
 Diffuser  KE to flow energy (T, P) PE = 0
 Turbine  Flow energy (T, P) to work S.S, adiabatic, KE 
 Compressor  Work to flow energy (T, P) PE  0
 Pump  Work to flow energy (P)
 Throttle Device  Relieve pressure S.S., adiabatic, no work,
KE  PE  0
 Heat Transfer heat between flow S.S., no work, KE 
Exchanger streams PE  0, external
surfaces adiabatic

M. Bahrami ENSC388, Help Session 2


Substance Models

Substance Model Application Characteristics


Domain
Property Tables – solid, Whenever Real data, thus it is ideal as
liquid, vapor experimental data is long as the experimental
available for conditions used to make table
substance of are broadly applicable to the
interest problem.
Incompressible – liquid Most liquids and Properties are approximated
processes where by the saturated liquid
volume expansion properties at the system
is not of interest temperature. Specific heats
are temperature dependent
only.
Cp = Cv = C & du = CdT = f(T)
y  yf(T)
h  hf(T) + vf(T)*[P – Psat(T)]
Incompressible – solid Most solids and Specific heats are temperature
processes where dependent only.
volume expansion Cp = Cv = C & du = CdT = f(T)
is not of interest
Compressibility Chart - Vapors that cannot Assumes that the vapors of all
vapor be classified as an substances are qualitatively
ideal gas similar, relative to their critical
state. Scaling relative to the
critical state allows the
generalized compressibility
chart to be used to find relation
between P-v-T.
Z = P v / RT
PR = P / Pcrit and TR = T / Tcrit
Ideal Gas Special case vapor Allows use of ideal gas
where PR (P/Pcrit) is equation of state, PV = m R T.
nearly 0. Also, specific heats are only
temperature dependent,
therefore, energies are also
only functions of temperature
du = Cv dT = f(T)
dh = Cp dT = f(T)

M. Bahrami ENSC388, Help Session 3

You might also like