Scribd
Upload
305 views

1.source Transformation Technique Problems

The document discusses how to convert between voltage sources in series and current sources in parallel. It explains that a voltage source in series with a resistance can be converted to an equivalent current source in parallel with the same resistance, and vice versa. To do this, a load resistor is attached to each circuit and the voltage and current delivered to the load are equated to ensure equivalence between the circuits. The process involves calculating the current produced by the voltage source and resistance, and the voltage across the current source and resistance, to relate the source values.

Uploaded by

hari
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
305 views

1.source Transformation Technique Problems

The document discusses how to convert between voltage sources in series and current sources in parallel. It explains that a voltage source in series with a resistance can be converted to an equivalent current source in parallel with the same resistance, and vice versa. To do this, a load resistor is attached to each circuit and the voltage and current delivered to the load are equated to ensure equivalence between the circuits. The process involves calculating the current produced by the voltage source and resistance, and the voltage across the current source and resistance, to relate the source values.

Uploaded by

hari
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 16

Source Transformation

Technique
Dr.V.Joshi Manohar
Dept. of EEE
E-mail: joshimanohar@presidencyuniversityin
Source Transformation
• A Voltage Source with a Series can be
converted into an equivalent current source
with parallel resistance(Same). Conversely,
• A current source with a parallel resistance can
be converted into voltage source with a series
resistance(same).

2
Source transformation
• Convert the voltage
source in series with R
into an equivalent
current source in
parallel with the SAME
R!

• And vice-versa.

3
How to make them equivalent??

• Attach a load resistor (the same one) to each


circuit, and ensure that each circuit delivers the
same voltage and current to the load.

4
vs
i =
L R +R
load

R
i = is
L R +R
load

5
Equating the two currents

vs R
i = = is
L R +R R +R
load load
vs
is =
R
v s = isR

ECE 201 Circuit Theory I


6
Source transformation

7
Source transformation

8
Source transformation

9
Source transformation

10
Source transformation

11
Source transformation

12
Source transformation

13
Source transformation

14
Source transformation

15
Queries??????

16

You might also like