Environmental Drilling & Completion Fluids Directory

The 2012 Environmental Drilling and Completions Fluids This survey includes information on products that meet the
Directory is a listing of industry fluid manufacturers and their regulations/guidelines for the North Sea operational sectors
individual products. The directory is differentiated into 17 sec- requiring substances/preparations used and discharged off-
tions based on type of fluid. Fifty participating companies and shore that are considered to pose little or no risk (PLONOR) to
distributors are listed in the directory. Each listing includes the environment. It also includes information on products that
new and updated products provided by each company with a meet the Harmonized Offshore Chemical Notification Format
description of the product and its general characteristics. (HOCNF) rating.

ENVIRONMENTAL DRILLING & COMPLETION FLUIDS COMPANY LISTING

Akzo Nobel Functional Chemicals BV Chandler Engineering KEMTRON Technologies Inc. Prime Eco Group Inc.
Lispinweg 6 2001 N Indianwood Ave 10404-B Cash Road 2933 Hwy 60 South
6075 CE Herkenbosch Broken Arrow, Oklahoma 74012 Stafford, Texas 77477 Wharton, Texas 77488
The, Netherlands (918) 250-7200 (281) 261-5778 (979) 531-1100
+31 475 539292 [email protected] [email protected]
Chemstar Products Co.
American Gilsonite Co. 3915 Hiawatha Avenue Lamberti SPA PT Indobent Wijaya Mineral
29950 South Bonanza Highway Minneapolis, Minnesota 55406-3203 Via Marsala 38 – Torre D Desa Punung
Bonanza, Utah 84008 (612) 722-0079 21013 Gallarate (VA) Pacitan, Propinsi Jawa Timur, Indonesia
(435) 789-1921 Italy 62 81 330886381
Croda Inc. (39) 0331-715701
Aqua-Clear Inc. 300A Columbus Circle [email protected] Quaron N.V.
608 Virginia Street, East Edison, New Jersey 08837 Industrieweg 27
Charleston, West Virginia 25301 (732) 417-0800 Lamberti USA Inc. 1521NE Wormerveer
(304) 343-4792 P.O. Box 1000 The Netherlands
Deep South Chemical Inc. US 59 @ County Road 212 (31) 75 6474500
Aqualon 229 Millstone Rd Hungerford, Texas 77448 [email protected]
Oil and Gas Technologies Broussard, Louisiana 70518 (281) 342-5675
1313 North Market Street (337) 837-9931 [email protected] Setac
Wilmington, Delaware 19894-0001 [email protected] 5905 Johnston Street, Suite E
(800) 345 0447 Liquid Casing Inc. Lafayette, Louisiana 70503-5466
[email protected] Drilling Specialties Co./ P.O. Box 56324 (337) 988-2236
Houston, Texas 77256-6324 [email protected]
Chevron Phillips LP
Archer Daniels Midland (713) 785-0594
P.O. Box 4910
4666 Faries Parkway The Woodlands, Texas 77387-4910 Special Products & Mfg., Inc.
Decatur, Illinois 62526 (832) 813-1879 M&D Industries of Louisiana Inc. 2625 Discovery Blvd
(800) 637-5843 [email protected] P.O. Box 82007 Rockwall, Texas 75032
[email protected] Lafayette, Louisiana 70598-2007 (972) 771-8851
(337) 984-0471
Drillsafe Janel Int.
ASAP Fluids Pvt. Ltd. [email protected] Strata Control Services Inc.
Polanska 35
203-204, Kailash Commercial Complex, 43-450 Ustron/Poland 1811 West Mill Street
L B S Marg, Vikhroli West, (48) 33 854 3000 Mayco Wellchem Inc. Crowley, Louisiana 70527-0272
Mumbai 400083 [email protected] 1525 North Post Oak Road (337) 785-0000
91-22-25789930 Houston, Texas 77055 [email protected]
[email protected] (713) 688-2602
Ecofluids Inc.
Three Riverway Suite 725 Sun Drilling Products Corp.
BASF Corp. Houston, Texas 77056 Messina Inc. 503 Main Street
3120 Hayes Road 713-654-7888 8131 LBJ Freeway, Suite 180 Belle Chasse, Louisiana 70037
Houston, TX 77082 [email protected] Dallas, Texas 75251 (504) 393-2778
800-794-1019 (214) 887-9600 [email protected]
[email protected] [email protected]
Elkem Silicon Materials
P.O. Box 8126 Vaagsbygd TBC-Brinadd
Baker Hughes Drilling Fluids N-4675 Kristiansand, Norway M-I SWACO 4800 San Felipe
2001 Rankin Road [email protected] 5950 North Course Drive Houston, Texas 77056
Houston, Texas 77073 Houston, Texas 77072 (713) 877-2758
(713) 625-4200 (713) 739-0222 [email protected]
Emery Oleochemicals GmbH
[email protected] [email protected]
Henkelstrasse 67
40589 Duesseldorf, Germany Tetra Technologies Inc.
Baroid Fluid Services (49) 211 5611 2502 Montello Inc. 24955 I-45 North
3000 North Sam Houston Parkway [email protected] 6106 East 32nd Place, Suite 100 The Woodlands, Texas 77380
Houston, Texas 77032 Tulsa, Oklahoma 74135-5495 (281) 367-1983
(281) 871-4135 (800) 331-4628 [email protected]
Grain Processing Corp.
[email protected] [email protected]
1600 Oregon Street
Muscatine, Iowa 52761 Turbo-Chem International Inc.
Boysenblue/Celtec International Inc. (866) 268-3561 Newpark Drilling Fluids P.O. Box 60383
P.O. Box 53648 [email protected] 16340 Park Ten Place, Suite 150 Lafayette, Louisiana 70596
Lafayette, Louisiana 70505 Houston, Texas 77084 (337) 235-3098
(337) 233-1121 281-754-8658 [email protected]
Gumpro Drilling Fluids Pvt Ltd.
[email protected] [email protected]
LBS Marg, Vikhroli West
Mumbai 400 083, India Venture Chemicals
Cabot Specialty Fluids 91-22-25793280 National Oilwell Varco P.O. Box 53631
Cabot House [email protected] 4310 N. Sam Houston Pkwy E. Lafayette, Louisiana 70505
Hareness Circle Houston, Texas 77032 (337) 232-1977
Altens Industrial Estate (713) 482-0566
Impact Fluid Solutions LLC
Aberdeen AB12 3LY [email protected] Weatherford International Ltd.
2800 Post Oak Blvd. Suite 2000
Scotland Houston, Texas 77056 16178 West Hardy Road 122-O
(44) 1224 897 229 (713) 964-7739 Oleon N.V. Houston, Texas 77060
[email protected] [email protected] Industriezone Ter Straten (281) 260-5700
Vaartstraat 130
Cesco Chemical Kelco Oil Field Group 2520 Oelegem Well Flow International
100 Cesco Lane Belgium 707 Lehman Street
3300 Bingle Road
Lafayette, Louisiana 70506 (32) 3 4706272 Houston, Texas 77018
Houston, TX 77055
(337) 984-4227 [email protected]
(713) 895-7575
[email protected]
PQ Corp.
P.O. Box 840
Valley Forge, Pennsylvania 19482
(610) 651-4200

50  Offshore  September 2012 • www.offshore-mag.com

 Plonor listing available

Plonor listing available

HOCNF classification

HOCNF classification
Passed LC50 test

Passed LC50 test

Synthetic fluid

Synthetic fluid
Saturated salt

usage (Ib/bbI)

Saturated salt

usage (Ib/bbI)
Nondispersed

Nondispersed
concentration

concentration
Fresh water

Fresh water
Dispersed

Dispersed
Oil-based

Oil-based
Normal

Normal
Product Product
name Description name Description
BACTERIACIDES CESIUM FORMATE Cesium Formate
ASAP FLUIDS BAKER HUGHES DRILLING FLUIDS
ASAP BIO AM Amine based Biocide • • • • 0.4-1.0 AMMONIUM NH4Cl - ammonium chloride • • 8.4-9.5 lb/gal E Y
CHLORIDE
ASAP CIDE EPA approved biocide • • • • 0.2-0.5
BAKER CLEAN 5 WB casing cleaning system for removal 80-100 L/m3 Y
ASAP BIO AL Gulteradhyde • • • • 0.4-1.0
of WB and OBM contaminants
BAKER HUGHES DRILLING FLUIDS BAKER CLEAN 6 A casing cleaning system and stabilizer 60-80 L/m3 Y
MAGNACIDE 575 Bacteriacide for well treatments • • • • 0.01-0.1% Gold Y Y for Baker Clean 5 in a viscosified system
MIL-BIO Glutaraldehyde bactericide • • • • 0.1-.03% Y HYCAL I Calcium chloride solution to 11.6 ppg • E Y
MIL-BIO NS Broad spectrum biocide for North Sea • • • • 0.1-.03% Y HYCAL II Calcium chloride/ calcium • E Y
X-CIDE SERIES Biocide series • • • • varies bromide sol. to 15.1 ppg
BAROID FLUID SERVICES HYCAL II SB Calcium bromide solution to 14.2 ppg • E Y
ALDACIDE-G Biocide-Glutaraldehyde solution • • • • 0.2-0.5 Y Y HYCAL III Calcium chloride/calcium bromide/ • B
STARCIDE Microbiocide solution • • • • 0.3-0.5 Y zinc-bromide solution to 19.2 ppg (Zn)
STARCIDE-P Microbiocide • • • • 0.05-0.25 Y HYCAL III SB Calcium bromide/zinc bromide • B
DEEP SOUTH CHEMICAL solution to 19.2 ppg (Zn)
INSULGEL Insulating packer fluid for deepwater • • As needed Gold Y
BF-30 Thiocarbamate bacteriacide • • • • 55 gal/100 bbl
NOCAL I Sodium chloride solution to 10.0 ppg • E Y
BIO 3 High molecular filming amines • • 55 gal/150 bbl
NOCAL II Sodium chloride/bromide sol. to 12.8 ppg • E Y
CIDE Blended organic sulfur antimicrobial agent • • • 5 gal/100 bbl
NOCAL II SB Sodium bromide solution to 12.8 ppg • E Y
DRILLSAFE JANEL
NOCAL K Potassium chloride solution to 9.7 ppg • E Y
DS-501E Bacteriacide and filming corrosion inhibitor • • • • • 0.01-0.02
NOMUL Z Non-emulsifier for calcium / zinc brines 0.5-1.0 vol %
DSB-301 Biodegradable ammonium compound • • • • 0.02-0.2
POTASSIUM FORMATE Potassium formate brines to 13.1 ppg • E Y
DSB-302 Biodegradable ammonium compound • • • • • 0.01-0.2
SODIUM FORMATE Sodium formate brines to 11.0 ppg • E Y
DSB-324 Isothiazolin-based compound • • • • 0.005-0.02
SUPER INSULGEL Insulating packer fluid for deepwater • • As needed
GUMPRO
BAROID FLUID SERVICES
GEL BIO AM Amine based Biocide • • • • 0.4-1.0
BARABRINE DEFOAM Brine defoamer • • • 0.05 -0.25 Y
GEL CIDE EPA approved biocide • • • • 0.2-0.5
BARABRINE SI Scale inhibitor for clear brines • • • • 0.025-0.05
GEL BIO AL Gulteradhyde • • • • 0.4-1.0
BARABUF pH Buffer • • • • 0.1-2.0 Y Y Y
KEMTRON TECHNOLOGIES BARACOR 100 Film-forming brine corrosion inhibitor • • • • 1% Y Y
K CIDE Biocide • • • • BARACOR 450 HT corr. inhibitor for >2% zinc brines • • 0.2-0.4% Y Y
LAMBERTI SPA BARACOR 700E Corrosion inhibitor for monovalent brines • • • • 0.5-2.0 Y Y
CARBOSAN EF Triazine based, general purpose • • • • .01-2 BARAKLEAN Degreaser and oil mud remover As needed Y
CARBOSAN 135/TR Triazine based, concentrated • • • • .01-2 BARAKLEAN DUAL Wellbore cleaner for displacement Y
MAYCO WELLCHEM BARAKLEAN FL Wellbore cleaner for displacement 5% in H20 Y
MAYCO CORCIDE Bacteriacide, corrosion inhibitor • • • • 0.2-0.5 BARAKLEAN FL PLUS Wellbore cleaner for displacement 5% in H20 Y
MESSINA BARAKLEAN NS PLUS Wellbore cleaner for displacement 5% in H20 Y
CIDE-COR Packer/completion inhibitor/biocide • • .15 BARAKLEAN GOLD Wellbore cleaner for displacement 5% in H20 Y
CIDE-COR-PLUS Packer/completion inhibitor/ • • .15 BARAPLUG Sized sodium chloride • • • 10-200 Y Y Y
biocide/oxygen scavenger 20, 50, 6/300
DRILCIDE Biocide • • • • .25 BARARESIN Sized oil soluble bridging particles • • 5.0-20.0
WELCIDE General Purpose Biocides - several varieties • • • • .2 BARARESIN-VIS Oil mud viscosifier • • 3.0-20.0 Y
M-I SWACO BARASCRUB Terpene derived well cleaner • • • • • As needed Y
M-I CIDE Non-U.S. Biocide • • • • 0.2-0.6 N N BARASORB Oil-adsorbant for brine reclamation As needed Y
SAFE-CIDE Non-U.S. Biocide • • • • 0.1-0.5 Y N BARAVIS HEC for brine viscosification • • • • 1-3 Y Y Y
NOV FluidControl BARAZAN Xanthan gum • • • • 0.1-2.0 Y Y Y
BARAZAN D Dispersion enhanced xanthan gum • • • • 0.1-2.0 Y Y Y
MYACIDE 25GA Bacteriacide • • • • 0.05 Y
BARAZAN D PLUS Dispersion enhanced xanthan • • • • 0.1-2.0 Y Y Y
XCIDE 207 Granular microbiocide • • • • 0.0175 Y
BARAZAN L Xanthan gum in liquid dispersion form • • • • 0.5-4.0 Y Y
QUARON N.V.
BROMI-VIS HEC--liquid form for brine viscosification • • 5.0-20.0 Y
MC GLUT - 10 Glutaraldehyde 10% sol. • • • • 0.4-0.6 FLO-CLEAN MD Flocculant for calcium brines 1-3 vol%
MC GLUT - 24 Glutaraldehyde 24% sol. • • • • 0.2-0.5 FLO-CLEAN Z Flocculant for zinc brines 1-3 vol%
SPECIAL PRODUCTS NO BLOK C Emulsion preventor for non-zinc brines 0.1-1 vol% Y
B-9099 DBPNA • • • • • • 0.01 NO BLOK Z Emulsion preventor for zinc brines 0.1-1 vol%
GREENCIDE 25-G Glutaraldehyde • • • • • • 0.01 OXYGON Oxygen scavenger 0.1-0.2 Y Y
TETRA TECHNOLOGIES, INC. BOYSENBLUE/CELTEC INTERNATIONAL
BIOCIDE Antimicrobial • • SUPERSLIDE Glass beads ‘Medium • • • • • • 10 Y
WEATHERFORD INTERNATIONAL LTD. MEGASLIDE Glass beads ‘C’ • • • • • • 10 Y
BIOCLEAR 1000 DBPNA - fast acting, general purpose • • • • • • 0.01 CABOT SPECIALTY FLUIDS
COMPLETION FLUIDS, CLEAR FLUIDS, BRINES CESIUM ACETATE Density to 2.3 sg (19.2 ppg) • •
AQUALON CESIUM FORMATE Density to 2.3 sg (19.2 ppg) • • E N
AQUAFLO LV High viscosity Standard Polyanionic cellulose • • • • 0.25-2 Y Y CESIUM FORMATE/ Density to 2.42 sg (20.18 ppg) • •
ACETATE BLEND
AQUAFLO HV Low viscosity Standard Polyanionic cellulose • • • • 0.25-2 Y Y
MIXED FORMATES Densities from 1.0 sg to 2.3 sg • E Y
AQUAPAC LIQUID Environmental friendly anhydrous • • • • 0.5-4 D Y Y
AquaPAC suspension POTASSIUM FORMATE Density to 1.57 sg (13 ppg) • E Y N
AQUAPAC LV Low viscosity Premium Polyanionic cellulose • • • • 0.25-2 Y Y SODIUM FORMATE Density to 1.3 sg (10.8 ppg) • E Y Y
AQUAPAC REGULAR High viscosity Premium Polyanionic cellulose • • • • 0.25-2 Y Y CHEMSTAR
AQUAPAC ULV Ultra Low viscosity Premium • • • • 0.25-2 Y Y EXSTAR Modified corn starch for temp. • • • • 2-6 Y
Polyanionic cellulose HYDROSTAR Pegel starch for temp. and hardness • • • •
ECODURA PLONOR rated aqueous HEC suspensions • • • • 1-10 Y Y STARPAK Highly derivatized starch ether • • • • 2-5 Y
NATROSOL 210 HHX Ultra High viscosity and Fast hydrating HEC • • • • 0.5-2.5 Y Y STARPAK DP Multi-derivatized starch ether • • • • 2-5 Y
NATROSOL Ultra High viscosity HEC • • • • 0.5-2.5 Y Y STARPAK II A complex variation of STARPAK • • • • 2-5 Y
250 HHR-P DEEP SOUTH CHEMICAL
NATROSOL HI-VIS Ultra High viscosity HEC • • • • 0.5-2.5 Y Y ARDS 4620 Non-ionic surfactants and alcohols • • •
NATROSOL LIQUID Environmental friendly anhydrous • • • • 1-5 D Y Y ARDS 9125 Non-ionic surfactants and alcohols • • •
HEC suspension ARDS 9755 Non-ionic surfactants and alcohols • • •
ARCHER DANIELS MIDLAND ARDS 9846 Mixture of alcohols • • •
OPTIXAN D Dispersed Xathan gum biopolymer • • • • 0.25-2.0 Y BIO SOLV Non-terpene OBM and SBM displacement • •
OPTIXAN DT Clarified Dispersed Xathan gum biopolymer • • • • 0.25-2.0 Y BP 101 A mixture of solvents • •
OPTIXAN Xanthan Gum biopolymer • • • • 0.25-2.0 Y DSC VIS Non-ionic pure hydroxyethyl cellulose • • 0.5-3
OPTIXAN FG Xanthan Gum biopolymer • • • • 0.25-2.0 Y GOLD CLEAN Surface cleaner • •
ASAP FLUIDS GOLD FLUSH Tubing cleaner & pipe pickle • •
ASAP HEC / HEC Hydroxy Ethyl Cellulose • 0.5-4.0 GOLD FLUSH CM Cement additive & cake removal •
ASAP NOX Ammonium Bisulphite 1-2 GOLD FLUSH II OBM & SBM displacement chemical • •
ASAP HIB Corrosion Inhibitor for Heavy Brine 1-2 GOLD FLUSH SA Stimulation additive & cake removal • •
SODIUM CHLORIDE Sodium Chloride Y GOLD FLUSH SB OBM & SBM displacement chemical • •
CALCIUM CHLORIDE Calcium chloride GOLD VIS Polymer viscosifier for Gold Flush • •
SODIUM BROMIDE Sodium Bromide HYDRO MAG pH buffer fresh & brine waters • • 0.1-0.3
CALCIUM BROMIDE Calcium Bromide INSOL Aphaltene inhibitor & dispersent • • As needed
ZINC BROMIDE Zinc Bromide LIQUID GUAR E Liquid viscosifiers using ummodified guar • • 0.04 Y
POTASSIUM FORMATE Potassium Formate LIQUID VIS Hydroxyethyl cellulose polymer • • 0.5-3
SODIUM FORMATE Sodium Formate LIQUID VIS E Hydroxyethyl cellulose polymer • • 0.5-3 Y

52  Offshore  September 2012 • www.offshore-mag.com

 Plonor listing available

Plonor listing available

HOCNF classification

HOCNF classification
Passed LC50 test

Passed LC50 test

Synthetic fluid

Synthetic fluid
Saturated salt

usage (Ib/bbI)

Saturated salt

usage (Ib/bbI)
Nondispersed

Nondispersed
concentration

concentration
Fresh water

Fresh water
Dispersed

Dispersed
Oil-based

Oil-based
Normal

Normal
Product Product
name Description name Description
PH HIGH Elevate pH fresh & brine water • • 0.1 KEMTRON TECHNOLOGIES
PH LOW Solution to lower pH fresh/brines • • 0.5 gpb KEM-VIS HS Polyacrylamide, Emulsion, w/AMPS • • • • 0.25-2
QUICK VIS Enhances thermal stability of HEC • • 0.3-0.4 gal/bbl LAMBERTI SPA
EXTENDER 75 ALBISOL AT Effective cleaner/spacer • • • • • • 2-10% Y
SI 120 Prevents depositions of alkaline • • As needed ALBISOL CF Environmental friendly washer / spacer • • • • • • 2-10% Y
earth metal scales ALBISOL DM Effective washer/spacer • • • • • • 2-10%
SLICK 5 Surfactants to disperse floating oil • ALBISOL F10 Environmental friendly washer / spacer • • • • • • 2-10% Y
SODA ASH Remove calcium from sodium base brines • As needed ALBISOL K100 Cleaner/Spacer for grease residues • • • • • • 2-10%
WELL WASH I Water-base displacement chemical • • • • ALBISOL MCS Effective washer/spacer • • • • • • 2-10%
WELL WASH II Water-base displacement chemical • • • • ALBISOL OE Solvent based pipe cleaner • 2-10%
DRILLING SPECIALTIES CO. BIOLAM XG Xanthan derivative polymeric viscosifier • • • • 0.25-2 Y
CLARIZAN High viscosity clarified biopolymer • • • • 0.25-2.0 E Y Y CARBOSAN EF Triazine based, general purpose biocide • • • • 0.01-2
BIOPOLYMER CARBOSAN 135/TR Triazine based, concentrated biocide • • • • 0.01-2
DRILLZAN D Economical high viscosity biopolymer • • • • 0.25-2.0 Y Y INICOR B/N Water soluble corrosion inhibitor • • • • 1-4
BIOPOLYMER INICOR W303 Amine based, water soluble • • • • 0.1- 3
DRISPAC PLUS Dispersable HV polyanionic cellulose • • • • 0.25-2.5 Y Y INICOR W735 Environmentally friendly, water soluble • • • • 0.1- 3
REGULAR
INICOR W481 Corrosion inhibitor for brine • • • • 0.01-0.3
DRISPAC PLUS Dispersable LV polyanionic cellulose • • • • 0.25-2.5 Y Y
INICOR 220 Corrosion inhibitor for brines • • • • 0.1- 3
SUPERLO
LAMOX TR Organic, water soluble H2S scavenger • • • • .1-.2
DRISPAC REGULAR High viscosity polyanionic cellulose • • • • 0.25-2.5 Y Y
POLYMER LAMOX TR/O Oil Soluble H2S scavenger • • • • .1-.2
DRISPAC SUPERLO Low viscosity polyanionic cellulose • • • • 0.25-2.5 Y Y LAMOX NA Oxigen scavengers for sodium and • • • • .1-.2
POLYMER potassium brines
DRILLPAC HV High viscosity polyanionic cellulose • • • • 0.25-2.5 Y Y LUBRICANT EHB Environmental friendly lubricant • • • • 0.5- 5 Y
POLYMER for heavy brines
DRILLPAC LV Low viscosity polyanionic cellulose • • • • 0.25-2.5 Y Y LUBRICANT CBR 600 Environmentally friendly brine soluble • • • • 0.5- 5 Y Y
POLYMER LAMBERTI USA
FLOWZAN High viscosity biopolymer • • • • 0.25-2.0 Y Y ALBISOL OE Solvent based pipe cleaner • • • • • • 1-8
BIOPOLYMER INICOR W303 Water soluble corrosion inhibitor • • • • 0.1-0.3
GREEN BASE GUAR Continuous mix liquid guar • • 2.0-5.0 Y Y LIQUID CASING
CM-36 ADDITIVE LIQUID CASING Polycrystalline • • • • • • 8 Y
GREENBASE High viscosity polyanionic cellulose • • • • 0.5-4.0 Y Y LIQUID CASING II Polycrystalline • • • • • • 6 Y
DRISPAC POLYMER
O-M SEAL Polycrystalline • • • • • • 50 Y
GREENBASE High viscosity biopolymer • • • • 0.5-4.0 Y Y
WORKOVER 2000 Non-damaging polymers • • 2 Y
FLOWZAN POLYMER
MESSINA
GREENBASE LIQUID High viscosity pure hydroxyethyl • • • • 0.5-5.0 Y Y
HEC POLYMER cellulosic polymer CIDE-COR Packer/completion inhibitor/biocide • • 0.15
GUAR LIQUID CM Continuous mix liquid guar • • 2.0-5.0 Y N CIDE-COR-PLUS Packer/completion inhibitor/ • • 0.15
ADDITIVE biocide/oxygen scavenger
HE-150 POLYMER brine viscosifier • • • • 2.0-10.0 Y N KLEEN-BAR Acid soluble weight agent • • As needed
LIQUID KLEEN-BLOCK Acid soluble LCM, sized • • 10-50
HE-150 POLYMER brine viscosifier • • • • 1.0-5.0 Y Y KLEEN-BRIDGE Oil soluble LCM/filtration control • • As needed
GREENBASE brine viscosifier • • • • 2.0-10 Y Y KLEEN-DRILL Viscosifier/filtration control - CaCO3 • • 6-8
HE-150 POLYMER KLEEN-DRILL-II Viscosifier/filtration control - sized salt • 1-5
HE 300 POLYMER High temp. brine viscosifier • • • • 2.0-5.0 E Y Y KLEEN-PIL Acid soluble LCM package • • 10-50
HE 400 POLYMER High temp. brine viscosifier • • • • 2.0-5.0 Y Y KLEEN-SEAL Acid soluble filtration • • 6-8
LIQUID DRISPAC High viscosity polyanionic cellulose • • • • 0.5-5.0 Y N KLEEN-SWEEP Water clarifier • • >.5
POLYMER KLEEN-VIS Viscosifier/filtration control • • 1-3
LIQUID FLOWZAN High viscosity biopolymer • • • • 0.5-4.0 Y N KLEEN-VIS-2 Polymer viscosifier • • 1-3
BIOPOLYMER KLEEN-VIS-X Cellulose viscosifier • • 1-3
LIQUID HEC High viscosity pure hydroxyethyl • • • • 0.5-5.0 Y N KLEEN-WATE Completion brines • • As needed
POLYMER cellulosic polymer POLYCAL Polymer/carbonate blend • • 1-3
ECOFLUIDS REDI-pH Alkaline buffer/stabilizer • • .05-.1
ECOFLUID Well wash • • • • • • 1:5 w/ water Y M-I SWACO
ECO-CORR Corrosion Inhibitor • • • • 1:3 w/water CONQOR 101 Water-dispersible amine for packers • • 3-4 N N
EMERY CONQOR 202B Film-forming amine for drillstring application • • • • 5-15 gal slugs N N
TERRADRIL S 853 B Surfactant blend, cleaner • • 6 CONQOR 303A Brine soluble amine for WO/C fluids • 1-4 N Y Y
TERRADRIL S 809 Surfactant blend, cleaner • • 6 CONQOR 404 Organic inhibitor for all WBM • • • • 0.2-0.5 Y N
TERRADRIL S 1118 Surfactant blend, cleaner • • 6 DEEPCLEAN Single-stage spacer pill • • 5-20 Y Y Y
TERRADRIL S 1053 Surfactant blend, cleaner • • 6 DEEPCLEAN NS Single-stage spacer pill • • 5-20%
GUMPRO D-SOLVER Chelant • • • To 75vol%
GEL HEC / HEC Hydroxy Ethyl Cellulose • 0.5-4.0 D-SOLVER D Dry Chelant • • • 60-80 Y
GEL NOX Ammonium Bisulphite 1-2 D-SOLVER HD High density Chelant • • • • 20-35% Y
GEL HIB Corrosion Inhibitor for Heavy Brine 1-2 D-SOLVER 7 Neutral to slightly basic chelant • • • To 85vol%
SODIUM CHLORIDE Sodium Chloride • D-SOLVER PLUS Chelant/acid blend • • • To 75vol%
CALCIUM CHLORIDE Calcium chloride D-STROYER Internal oxidizer breaker product • • 0.5-2.0
SODIUM BROMIDE Sodium Bromide D-STRUCTOR Organic acid precursor used in FAZEPRO • • >30vol%
CALCIUM BROMIDE Calcium Bromide or FAZE-OUT breaker systems
ZINC BROMIDE Zinc Bromide DOWFROST MI Insulating packer fluid for deepwater • • As needed
POTASSIUM FORMATE Potassium Formate DUO-VIS Shear thinning viscosifier • • • • 1-4 Y Y
SODIUM FORMATE Sodium Formate DUO-VIS L Liguid Shear thinning viscosifier • • • • 1-5 Y Y
CESIUM FORMATE Cesium Formate FILTER FLOC Flocculant • • 0.01-2% N N
IMPACT FLUID SOLUTIONS FLO-VIS PLUS Shear thinning viscosifier • • • • 1-3 Y Y
StAR HIB L Organic Shale inhibitor • • • 2% - 5% Y Y FLO-VIS NT Shear thinning viscosifier • • • • 1-3 Y Y
StAR HIB CF Organic Shale inhibitor - chloride free • • • 2% - 5% Y FLO-VIS L Liguid Shear thinning viscosifier • • • • .5-1.5 Y Y
StAR GLYCOL SF Organic Shale inhibitor - glycol salt free • • • 2% - 5% Y ISOTHERM Oil-base insulating packer fluids • • Y
FLC2000 Low-invasion fluid loss additive • • • • • 3.0-8.0 Y Y Y OS-1L Sulfite-based oxygen scavenger • • • • 0.1-0.5 Y Y
KELCO OIL FIELD GROUP SAFE-BREAK 611 Non-emulsifier • 0.1-2% N N
SAFE-BREAK CBF Emulsion preventer for brine • 0.1-0.5 N N
CELPOL ESL Poly anionic cellulose extreme low viscosity • • • • 0.25-2 Y Y
SAFE-BREAK L Breaker for brine viscosifiers • 1-4 N N
CELPOL R Poly anionic cellulose HV • • • • 0.25-2 Y Y
SAFE-BREAK S Breaker for brine viscosifiers • 0.002-0.01 N N
CELPOL RX Supreme poly anionic cellulose HV • • • • 0.25-2 Y Y
SAFE-BREAK ZINC Emulsion preventer for zinc bromide brine • 0.1-0.5 N N
CELPOL SL Poly anionic cellulose LV • • • • 0.25-2 Y Y
SAFE-CARB Ground marble • • • • • • 5-50 Y N
CELPOL SLX Supreme poly anionic cellulose LV • • • • 0.25-2 Y Y
SAFE-COR Amine-based corrosion inhibitor • 0.5-1% Y N
FINNFIX H CMC high viscosity pure • • • • 0.2-3 Y Y
SAFE-COR 220X Brine-soluble amine for WO/C fluids • 0.5-1% N N
FINNFIX HC CMC extra high viscocity technical • • • • 1-3 Y Y
SAFE-COR 820X Blend of SAFE-COR 220X and O2 scavenger •
FINNFIX L CMC low viscosity pure • • • • 0.2-3 Y Y
SAFE-COR C Amine-base corrosion inhibitor • 0.25-0.5% N N
FINNFIX LC CMC low viscosity technical • • • • 2-3 Y Y
SAFE-COR E Amine-base corrosion inhibitor • 0.05-1% N N
FINNFIX RC CMC high viscosity technical • • • • 1-3 Y Y
SAFE-COR EN Modified amine based corrosion inhibitor • 0.3 - 0.5%
KELZAN XC POLYMER Xanthan gum biopolymer • • • • 0.75/2 Y Y
SAFE-COR HT Inorganic thiocyanate-base corrosion • • 0.04% N N
KELZAN XCD Dispersible Xanthan biopolymer • • • • 0.75/2 Y Y
inhibitor for high-temperature use
POLYMER
SAFE-COR Z PLUS Amine-base corrosion inhibitor • 0.5-1 N N
XANVIS POLYMER Clarified Xanthan biopolymer • • • • 0.75/2 Y Y
SAFE-DFOAM Blended alcohol defoaming agent • • • 0.08-0.16 N N
XANVIS L Refined clarified liquid Xanthan slurry • • • • 0.75/2 Y
SAFE-FLOC I Flocculant • • 0.01-2% N N

www.offshore-mag.com • September 2012  Offshore  53

 Plonor listing available

Plonor listing available

HOCNF classification

HOCNF classification
Passed LC50 test

Passed LC50 test

Synthetic fluid

Synthetic fluid
Saturated salt

usage (Ib/bbI)

Saturated salt

usage (Ib/bbI)
Nondispersed

Nondispersed
concentration

concentration
Fresh water

Fresh water
Dispersed

Dispersed
Oil-based

Oil-based
Normal

Normal
Product Product
name Description name Description
SAFE-FLOC II Flocculant • • • 0.01-2% N N RADIAGREEN CLW Cased hole cleaner • • • • • As needed
SAFE-LINK Cross link polymer LCM non zinc • 32 pails/10 bbl N N RADIAGREEN Lubricant for heavy brines • • • 0.5 - 3% Y N Y
SAFE-LINK 110 Cross link polymer LCM non zinc • 32 pails/10 bbl N N EME SALT
SAFE-LINK 140 Cross link polymer LCM zinc • 32 pails/10 bbl N N RADIAGREEN RA Reservoir enhancer • • • • 0.5 - 1% Y N
SAFE-LINK 150 Cross link polymer LCM • PRIME ECO GROUP INC.
SAFE-LUBE Water-soluble brine lubricant • 0.6 vol% N N DTS-2002 Polyalcohol no cloud point • • • • 3%-10% Y Y
SAFE-LUBE CW Water-soluble brine lubricant for cold weather • 0.6 vol% SKL-100 Environmental substitute for KCL • • • • • 1-4 Y
SAFE-PEEL Releasing agent to lower adhesion of RDF • 8-12% Y N QUARON N.V.
SAFE-SCAV CA Organic oxygen scavenger for Ca-based brines • 0.15 N N DPI CBS Calc,barium,strontium sulphate dissolver • •
SAFE-SCAV HS Organic H2S scavenger • 0.1 N N MC CE-FORMATE Cesium formate • •
SAFE-SCAV HSW Organic scavenger containing methanol • 0.1 N N MC FVIS Solids free fluidloss additive/viscosifier • • • • 3-6
SAFE-SCAV NA Liquid bisulfate-base oxygen scavenger • 0.1 N N MC HEC Hydroxy ethyl cellulose polymer • • • • 1-3
for Na and K brines MC K-FORMATE Potassium formate • • •
SAFE-SCAVITE II Calcium scale preventer • 0.15-3 N N MC ZAN XL Liquid xanthan gum polymer • •
SAFE-SOLV E Displacement solvent • Up to 100% MC ZAN XN Shear thinning viscosifier • • • • 0.25-2
SAFE SOLV OM Solvent/surfactant was chemical O/SBM • • 3-10% N N MC ZAN XT Shear thinning viscosifier temp.stable • • • • 0.25-2
SAFE-SURF E Nonionic wellbore cleaning agent for OBM • • • • • 2-15% SPECIAL PRODUCTS
SAFE-SURF EH Wellbore cleaning compound • • • • •
PRODUCT 239 Clay inhibitor • • • • 1-2 Y
SAFE-SURF NS Wash chemical • • 5-20vol%
PRODUCT 2003 Packer fluid • • • • 1-4
SAFE-SURF O Blend of surfactants, solvents and water • 2-20% N N
PRODUCT 2008 Highly soluble oxygen scavenger • • • • 1-4
wetting agents, for well displacement
PRODUCT 2063 Packer fluid • • • • 1-4
SAFE-SURF O II Concentrated surfactant for wellbore clean-up • • 2-20% N N
PRODUCT 2077 Unique corrosion inhibitor oxygen scavenger • • • 1-4
SAFE-SURF W Displacement wash chemical for WBM • • • • 2-10% N N
PRODUCT 6166 Clay Inhibitor • • • • 1-2
SAFE-SURF WE Non-ionic surfactant blend • • 2-10%
PRODUCT 7012 Defoamer • • • • 1-2
SAFE-SURF WN Displacement wash chemical for WBM • • • • 2-10%
PRODUCT 7014 Defoamer (formulated alcohol) • • • • 1-2
SAFE-SURF Y Displacement wash chemical for O/SBM • • 7 Y
SP-40X Acid corrosion inhibitor • • • • 1-4
SAFE-T-PICKLE Pipe pickel solvent • • • • • • 100% N N
SAFE-VIS Viscosifier for brine • 0.5-4 Y N SUN DRILLING PRODUCTS
SAFE-VIS E Liquid viscosifier for brines • 5-10 Y N EZE-SLIDE Synthetic Lubricant • • • • 1-2% Y
SAFE-VIS HDE Liquid viscosifier for high-density brines • 14-29 N N LIQUI-BEADS Liquid and mechanical lubricant • • • • 1-2% Y
SAFE-VIS LE Liquid viscosifier for brines • 0.6-1.2 gpb N N LUBRA-GLIDE Mechanical solid spherical lubricant • • • • • • 4-6 lb/bbl Y
SAFE-VIS OGS Specially formulated liquid HEC • 0.6-1.2 gpb TBC-BRINADD
SAFETHERM Insulating packer fluid for deepwater • • As needed CIB Corrosion inhibitor • • • 0.25 gal/bbl
SEAL-N-PEAL Inside packer fluid loss control • • • • TETRA TECHNOLOGIES, INC.
SI-1000 Blended scale inhibitor • • • • 0.05 N N Y ACETIC ACID Mild organic acid • •
SV-120 Hydrogen sulfide scavenger for cold climates • 1-5 N N BUFF-10 Controlled sloubility MgO - buffer pH • •
WELLZYME A Enzyme breaker w/ biocide for WB RDFs • • • • 2-5 vol% N N BUFF-6 Organic carboxylic acid - to buffer pH • •
WELLZYME ME Starch specific enzyme designed to • • 1-10 vol% to moderate acid
breakdown WB RDF filter cake deposits CALCIUM BROMIDE Calcium bromide • • 11.7-15.1
WELLZYME NS Enzyme breaker w/o biocide for RDFs • • • • 2-5 vol% N N CALCIUM CHLORIDE Calcium chloride • • 8.6-11.6
MONTELLO CAUSTIC SODA Base • •
MON PAC Polyanionic cellulose • • • • 0.25-2 Y CITIC ACID Complex organic acid • •
MON PAC ULTRA LO Polyanionic cellulose • • • • 0.25-2 Y HCOOK Potassium formate, 97% • •
NEWPARK DRILLING FLUIDS HCOONA Sodium formate, 97% • •
NEWARMOR Film-forming amine • • • • 5-15 gal/ HYDROCHLORIC ACID Strong mineral acid • •
100 bbl KCl Potassium chloride, 99% • •
NOV FluidControl LIME Base • •
AMBASOL Barium sulfate dissolver • • 25-50% MAGNESIUM OXIDE Base • •
Magnesium Oxide Ph stabilizer 0.2 NACL Drillers’ salt • •
PRO-CHECK Corrosion inhibitor filming amine • • 30 gal/100 bbl NACL Sodium chloride evaporated salt • •
PRO-CHECK HT Corrosion inhibitor HT/heavy brine • • 55 gal/400 NH4Cl Ammonium chloride, 99% • •
TRU-FLUSH Well wash • • 55 gal/100 bbl POTASSIUM FORMATE Potassium formate • • 8.4-13.1
AMONIUM CHLORIDE Salt • • As needed POTASSIUM Base • •
HYDROXIDE
PRO-CHECK O2 Oxygen scavenger • •
SODA ASH High purity anhydrous sodium carbonate • •
AMSCALE Corrosion inhibitor • • 10%
SODIUM BROMIDE Sodium bromide • • 10-12.7
NOV FIBER Fluid loss • • 1/10
SODIUM FORMATE Sodium formate • • 8.4-11
EGMB Displacement chemical (solvent) •
ZNBR2/CABR2 Zinc bromide and calcium bromide solutions • • 14.5-19.2
AMVIS HTE Displacement chemical (viscosifier) •
19.2 SOLUTIONS
AMZINC VIS I Liquid viscosifier • 3%
ZNBR2/CABR2 Zinc bromide and calcium bromide solutions • • 14.5-20.5
AMZINC VIS II Liquid viscosifier • 3% 20.5 SOLUTIONS
AMZINC VIS III Liquid viscosifier • 3%
TURBO-CHEM INTERNATIONAL
BREAKER I HEC breaker 0.25-2
EZ SQUEEZE High solids, high fluid loss squeeze • • • • • • 32-100 ppb Y
BREAKER II HEC breaker
PREMIUM SEAL Cellulose fiber (fine & coarse) • • • • • • 4-6 Y
CALCIUM BROMIDE Salt • • As needed
SWELLCM Gelled, swelling, sealing agent • • • • • • 10 ppb Y
CALCIUM CHLORIDE Salt • • As needed
SWELLCM ACTIVATOR Crystals used to adjust pH of water • • • • 2 ppb Y
CLEAN DRILL C Drill-in fluid - calcium carbonate system when mixing SwelLCM
CLEAN DRILL HD Drill-in fluid (high density brines) -
WEATHERFORD INTERNATIONAL LTD.
calcium carbonate system
ENZYME I HEC breaker 20 oz/20 bbl ALPHA 6177 Primary well dispersing fluid, low tox.. •
FIBER-VIS Viscosifier extender • • 0.5/10 CLEAR FORM K Potassium formate completion and • • • • N
drilling fluid base
HEC-SAV Thermal stabilizer • • 0.5-1%
MAGMA FIBER Lost circulation material • • 5-25 WELL FLOW INTERNATIONAL
MYACIDE 25GA Bacteriacide • • 5 gal/100 bbl CUTCLEAN Surface cleaner • • • • • •
NOV CARB C Calcium carbonate • • As needed DIRT MAGNET Alcohol/surfactant blend • • • •
NOV CARB F Calcium carbonate • • As needed DIRT MAGNET “E” Solvent/surfactant blend • • • • E
NOV CARB M Calcium carbonate • • As needed HDC Complex barium/carbonate dissolver • • • • • • D
FOAM-OUT Defoamer • • 0.25/100 bbl HOG WASH Solvent/surfactant blend • • • • •
HEC-VIS L Viscosifier liquid • • 0.25-4 K+ FERROUT Iron sulfide/amorphic iron dissolver • • • • E
NOV XAN D Viscosifier dry powder • • 0.25-4 KOPLUS LO Well wash/spotting fluid • • • • • E
NOV XAN TD Viscosifier • • 0.25-2 LIQUID SCRAPER Complex acid/solvent blend • • • • • E
NOV XAN T Viscosifier • • 0.25-2 POWERWASH Surface cleaner • • • • • •
PERM-CON Brine surfactant RINSE AID Complex surfactant blend • • • • • •
PHDOWN pH stabilizer depressor • • 1/10 RINSE AID “E” Complex surfactant blend • • • • • • E
PHUP pH stabilizer • • 1/10 SUPER PICKLE Blend of solvents • • • • • C
POTASSIUM Salt • • As needed SUPER PICKLE TF180 Complex solvent blend • • • • • D
CHLORIDE SUPER PICKLE XLE Complex solvent blend • • • • • E
SCALEHIB Scale inhibitor • • 2.50% CORROSION INHIBITORS
SD-300 Nonionic surfactant • • 5% ASAP FLUIDS
SODIUM BROMIDE Salt • • As needed ASAP CI Drilling Mud corrosion inhibitor • • • • 1-2
SODIUM CHLORIDE Salt • • As needed ASAP CI-A Film Forming Organic Amine • • • • 1-2
OLEON N.V. ASAP CI-P Organophosphorous Compound • • • • 1-2
RADIAGREEN CLO Stimulation additive & mud cake breaker • • As needed ZINC CARBONATE H2S scavenger • • • • 2-3

54  Offshore  September 2012 • www.offshore-mag.com

 Plonor listing available

Plonor listing available

HOCNF classification

HOCNF classification
Passed LC50 test

Passed LC50 test

Synthetic fluid

Synthetic fluid
Saturated salt

usage (Ib/bbI)

Saturated salt

usage (Ib/bbI)
Nondispersed

Nondispersed
concentration

concentration
Fresh water

Fresh water
Dispersed

Dispersed
Oil-based

Oil-based
Normal

Normal
Product Product
name Description name Description
BAKER HUGHES DRILLING FLUIDS CIDE-COR-PLUS Packer/completion inhibitor/biocide/ • • 2.0-3.5
BRINE-PAC 1500 Corrosion inhibitor for solids-free fluids • • 5-10gal/100 oxygen scavenger
BRINE-PAC 3N1 3 in 1 corrosion inhibitor • • 5-10 gal/ FERRO-SPONGE Powdered H2S remover • • • • 10-30
100 bbl H2LESS Liquid H2S scavenger • • • • 0.3-0.5
BRINE-PAC XTS Corrosion Inhibitor for solids-free fluids • • 12 gal/100 bbl MESUCO-SORB Powdered H2S remover • • • • 2-6
KD 40 Corrosion and scale inhibitor • • • • .05-.2g/bbl OILAID-CI Corrosion inhibitors - numerous varieties • • • •
KD 740 Corrosion and scale inhibitor • • .5-2 gal/10 bbl SORB-OX-L Liquid oxygen scavenger • • • • >0.10
LATIHIB Carbon dioxide scavenger • • • 1.5-4 ppb SORB-OX-P Powdered oxygen scavenger • • • 0.1
MIL-GARD Corrosion Inhibitor • • • • • 1-3 ppb M-I SWACO
MIL-GARD FE H2S extractor • • • • • • 5.5 gal/100 Y CONQOR 101 Water-dispersible amine for packers • • 4 N N
MIL-GARD L Zinc chelated sulfide scavenger • • • • • • 5.5 gal/100 CONQOR 202B Film-forming amine for drillstring application • • • • 5-15 gal slugs N N
MIL-GARD XPR Hydrogen sulphide scavenger for NS use • • • • • • varies Gold CONQOR 303A Brine-soluble amine for WO/C fluids • 1-4 Y N Y
NOXYCOR Corrosion inhibitor for water based and • • • • Varies CONQOR 404 Organic inhibitor for all WBM • • • • 0.2-0.5 Y N
air/mist/foam drilling applications IRONITE SPONGE H2S scavenger • • • • • •
NOXYGEN L Liquid oxygen scavenger • • • • 75 to 125 ppm OS-1L Sulfite-base oxygen scavenger • • • • 0.1-0.5 Y Y
NOXYGEN NA Liq. oxygen scavenger - sodium bisulfite • • • • 250 ppm Y Y RE-PLEX Anionic scavenger for DRILPLEX system • 0.25-0.5
NOXYGEN XT Organic oxygen scavenger • • As needed SAFE-COR Amine-base corrosion inhibitor • 0.5-1.0% Y N
OHR AC Acid corrosion control for the 0.75-1% SAFE-COR 220X Brine-soluble amine for WO/C fluids • 0.5-1.0% N N
MICROWASH System SAFE-COR C Amine-base corrosion inhibitor • 0.25-0.5% N N
OHR ACE Acid corrosion control for 0.5-1% Y SAFE-COR EN Amine-base corrosion inhibitor • 0.05-1.0% N N
MICRO-WASH - enviro. safe
SAFE-COR HT Inorganic thiocyanate-base corrosion • • 0.04% N N
BAROID FLUID SERVICES inhibitor for high-temperature use
BARABRINE SI Scale inhibitor for clear brines • • .025-.05 SAFE-COR Z PLUS Amine-base corrosion inhibitor • 0.5-1 N N
BARACOR 95 Corrosion inhibitor and CO2 remover • • • • 0.25-2.0 Y Y SAFE-SCAV CA Organic oxygen scavenger for Ca-base brines • 0.15 N N
BARACOR 100 Film-forming corrosion inhibitor • • 0.01 Y Y SAFE-SCAV HS Organic H2S scavenger • 0.1 N N
BARACOR 450 HT corr. inhibitor for >2% zinc brines • • 0.2-0.4% Y Y SAFE-SCAV HSW Organic H2S scavenger w/ methanol • 0.1 N N
BARACOR 700 Corrosion inhibitor for monovalent brines • • 0.5-1.5 Y SAFE-SCAV NA Liquid bisulfate-base oxygen scavenger • 0.1 N N
BARACOR 700E Corrosion inhibitor for monovalent brines • • 0.5-2.0 Y Y for Na and K brines
BARAFILM Filming amine • • 1:6 W/O Y SAFE-SCAVITE Calcium scale inhibitor • 0.15-3 N N
BARASCAV-D Powdered oxygen scavenger • • • • 0.1-0.5 Y Y Y SAFE-SCAVITE II Calcium scale preventer • 0.15-3 N N
BARASCAV-L Liquid oxygen scavenger • • • • 0.1-0.5 Y Y Y SI-1000 Blended scale inhibitor • • • • 0.05 N N Y
NO-SULF Zinc compound for sulfide scavenging • • • • • • 1.0-4.0 Y SULFATREAT 410 HP Odor control & H2S scavenger • • • •
OXYGON Oxygen scavenger • • 0.1 Y SULFATREAT DFS H2S scavenger • • • •
SOURSCAV Hydrogen sulfide scavenger • • • • 1-4 Y SULFATREAT XLP Extended life H2S scavenger • • • •
CRODA SV-120 Cold climate H2S scavenger • 1-5 N N
MONACOR BE Non-foaming water soluble corrosion inhibitor • • • 0.05-1.0% NEWPARK DRILLING FLUIDS
MONACOR TEH Oil soluble corrosion inhibitor • • 0.05-1.0% NEWARMOR Film-forming amine • • • • 5-15 gal/
MONALUBE 215 Oil soluble corrosion inhibitor • • 0.05-1.0% 100 bbl
ATPHOS 3226 Oil soluble corrosion inhibitor • • 0.05-1.0% NOV FluidControl
MONAZOLINE O Oil soluble corrosion inhibitor • • 0.05-1.0% PRO-CHECK Filming amine • • • • 30/100 Y
MONAZOLINE T Oil soluble corrosion inhibitor • • 0.05-1.0% PRO-CHECK HT Inorganic liquid stable @ 450¡ • • • • 55/100 Y
PRIPOL 1017 Dimer fatty acid • • 0.05-1.0% PRO-CHECK O2 Oxygen scavenger +B566 • • • • 0.02 Y
PRIPOL 1029 Dimer fatty acid • • 0.05-1.0% PRIME ECO GROUP INC.
PRIPOL 1040 Trimer fatty acid • • 0.05-1.0% QUICK SLIP Clay Inhibitor, lubricant,pay zone protector • • • • • • 4-6 ppb Y
PRIPOL 1045 Dimer/Trimer fatty acid • • 0.05-1.0% SPECIAL PRODUCTS
DRILLSAFE JANEL
PRODUCT 2003 Packer fluid inhibitor concentrate • • • • 1-4
DS-403 Water soluble, filming corrosion inhibitor • • • • 0.02-0.05 PRODUCT 2008 Highly soluble oxygen scavenger • • • • 1-4
DS-501E Bacteriacide and filming corrosion inhibitor • • • • • 0.01-0.02 PRODUCT 2078 Atmospheric drill pipe corrosion inhibitor • • • • 1-4
DS-AC3 Acid corrosion inhibitor • • • • • 0.01-0.02 PRODUCT 2055 Packer fluid inhibitor • • • • 1-4
OSC 1 Oxygen scavenger • • • • 0.01-0.1 PRODUCT 2077 Corrosion inhibitior for systems w/oxygen • • • • 1-4
OSC 40 Liquid catalyzed oxygen scavenger • • • • 0.01-0.05 SP-40X Acid corrosion inhibitor • • 1-4
GUMPRO TBC-BRINADD
GEL CI Drilling Mud corrosion inhibitor • • • • 1-2 CIB Corrosion inhibitor • • • 0.25 gal/bbl
GEL CI-A Film Forming Organic Amine • • • • 1-2 TETRA TECHNOLOGIES, INC.
GEL CI-P Organophosphorous Compound • • • • 1-2
BIOCIDE Antimicrobial • •
ZINC CARBONATE Zinc Carbonate • • • • 2-3
CORSAF SF Corrosion inhibitor • •
LAMBERTI SPA
OXBAN Oxygen scavenger • •
ANTISCALE AC/1 Phosphonate-based scale inhibitor • • • • 10-1000 ppm OXBAN HB Oxygen scavenger for mid to heavy fluids • •
ANTISCALE AC/137 Mixed scale inhibitor • • • • 10-1000 ppm PAYZONE SI-139 Phosphonate scale inhibitor • •
ANTISCALE AC/58 Polymer-based scale inhibitor • • • • 10-1000 ppm TETRA H2S H2S Scavenger • • • • 0.1-8
INICOR B/N Water soluble corrosion inhibitor • • • • 0.1- 3 SCAVENGER
INICOR C4 Phosphate based CO for completion • • • • 0.1- 3 TETRAHIB Multicomponent inorganic film former • •
INICOR W303 Amine based, water soluble • • • • 0.1- 3 TETRAHIB PLUS Inorganic • •
INICOR MF/27 Oil soluble • • 0.1- 3 WEATHERFORD INTERNATIONAL LTD.
INICOR W481 Environmentally friendly, water soluble • • • • 0.1- 3 Y ALPHA 1064 High solids tolerant oxygen scavenger • 0.01-0.05
INICOR 220 Corrosion inhibitor for brines • • • • 0.1- 3 ALPHA 1214 Corrosion inhibitor for brines • • 0.01-0.05
INICOR W735 Environmentally friendly, water soluble • • • • 0.1- 3 Y ALPHA 2068 High temperature corrosion inhibitor • • 0.25-2
INICOR 882 Organo-phosphate Corrosion inhibitor • • • • 0.1- 3 ALPHA 2275 Oxygen corrosion inhibitor low tox.. • • • 0.02-0.05
LAMOX TR Organic, water soluble H2S scavenger • • • • 0.1-0.2 ALPHA 2296 Oxygen corrosion inhibitor low tox.. • • • 0.02-0.05
LAMOX TR/O Oil Soluble H2S scavenger • • • • 0.1-.2 ALPHA 2867 High solids scale inhibitor • 25-1000 ppm
LAMOX NA Oxigen scavengers for sodium • • • • 0.1-.2 ALPHA 3069 Packer fluid inhibitor • • 0.25-2
and potassium brines
ALPHA 3337 Drill pipe batch corrosion inhibitor •
LAMBERTI USA
ALPHA 3412 Down hole or drill pipe corrosion inhibitor •
INICOR IT Imidazoline based, concentrated • • • • 0.1-0.3 ALPHA 3444 Down hole or drill pipe corrosion inhibitor •
INICOR W Concentrated water soluble • • • • 0.1-0.3 ALPHA 6415 Drill pipe corrosion inhibitor • 0.01-0.05
INICOR W15 Filming amine • • • • 0.1-0.3 SULFACLEAR 8199 H2S scavenger • 0.5-1.5
MAYCO WELLCHEM SULFACLEAR 8411C H2S scavenger • 0.01-1.5
CIDE-COR Packer/completion inhibitor/biocide • • 0.15 SULFACLEAR 8649 H2S scavenger • 0.01-1.5
CIDE-COR-PLUS Biodegradable inhibitor/biocide • • 0.15
DEFOAMERS
for packer fluids/completion
FERRO-SPONGE Powdered H2S remover • • 20 Y ARCHER DANIELS MIDLAND
H2 LESS Liquid H2S remover • • 0.3 Y ADM 2100 Low visc “Green” defoamer, emulsifier, • • • • • • 0.05-0.25 Y
IRONITE SPONGE Powdered H2S remover • • • 20 Y lubricity enhancer, wetting agent
MAYCO CORCIDE Bacteriacide, corrosion inhibitor • • • • 0.2-0.5 ASAP FLUIDS
MAYCO PH BUFFER Corrosion inhibitor • • • • 1-2 ASAP DEFOAM S Stearate based solid defoamer • • • • 0.5-2.0
MESUCO-SORB H2S remover • • • • 4 Y ASAP DEFOAM A Alcoholic defoamer • • • • 0.5-2.0 Y
OILAID-CI Corrosion inhibitor (numerous formulations) • • • • As needed ASAP DEFOAM E Polyol Based Defoamer • • • • 0.5-2.0
SORB-OX-L Oxygen scavenger • • 0.5 Y ASAP DEFOAM Si Silicon based liquid defoamer • • • • 0.5-2.0
SORB-OX-P Oxygen scavenger • • • • 0.2 Y BAKER HUGHES DRILLING FLUIDS
MESSINA LD-8 Non-hydrocarbon-based defoamer • • • • As needed Y
CIDE-COR Packer completion inhibitor • • 3.5-7.0 for water-based fluids

www.offshore-mag.com • September 2012  Offshore  55

 Plonor listing available

Plonor listing available

HOCNF classification

HOCNF classification
Passed LC50 test

Passed LC50 test

Synthetic fluid

Synthetic fluid
Saturated salt

usage (Ib/bbI)

Saturated salt

usage (Ib/bbI)
Nondispersed

Nondispersed
concentration

concentration
Fresh water

Fresh water
Dispersed

Dispersed
Oil-based

Oil-based
Normal

Normal
Product Product
name Description name Description
LD-8e North Sea compliant defoamer • • • • As needed Y TURBO-CHEM INTERNATIONAL
for water-based fluids TURBO-DEFOAM Defoamer • • • • Y
LD-9 Defoamer for both fresh & • • • • As needed WEATHERFORD INTERNATIONAL LTD.
saltwater drilling fluids ALPHA 2325 BADF Organic defoamer • 25-500 ppm
LD-10 Silicone based defoamer for fresh • • • • As needed
& saltwater drilling fluids DRILL-IN FLUID
LD-S Silicone based defoamer for fresh AQUALON
& saltwater drilling fluids AQUAFLO LV High viscosity Standard Polyanionic cellulose • • • • 0.25-2 Y Y
W.O. DEFOAM Alcohol-based compound for defoaming • • • • 0.1 gal/bbl Y AQUAFLO HV Low viscosity Standard Polyanionic cellulose • • • • 0.25-2 Y Y
water-based fluids AQUAPAC LIQUID Environmental friendly anhydrous • • • • 0.50-4 D Y Y
BAROID FLUID SERVICES AquaPAC suspension
BARA-DEFOAM 1 Alcohol and fatty acid blend • • • 0.05-0.2 Y AQUAPAC LV Low viscosity Premium Polyanionic cellulose • • • • 0.25-2 Y Y
BARA-DEFOAM HP Polypropylene glycol • • • 0.05-0.3 Y AQUAPAC REGULAR High viscosity Premium Polyanionic cellulose • • • • 0.25-2 Y Y
BARA-DEFOAM W300 Alcohol and fatty acid blend • • • 0.05-0.2 Y AQUAPAC ULV Ultra Low viscosity Premium • • • • 0.25-2 Y Y
BARABRINE DEFOAM Non-ionic surfactant blend for brines • • 0.05-0.2 Y Polyanionic cellulose
FOAM ZAPPER Blend of renewable resource products • • • 0.05-0.2 Y ECODURA PLONOR rated aqueous HEC suspensions • • • • 1-10 Y Y
BOYSENBLUE/CELTEC INTERNATIONAL NATROSOL 180 GR Low viscosity Hydroxyethyl cellulose • • • • 0.25-2 Y Y
BLEN-NO FOAM Defoamer • • • • NATROSOL 210 HHX Ultra High viscosity and Fast hydrating HEC • • • • 0.5-2.5 Y Y
CRODA NATROSOL 250 EXR Low viscosity Hydroxyethyl cellulose • • • • 0.25-2 Y Y
NATROSOL 250 GXR Low viscosity Hydroxyethyl cellulose • • • • 0.25-2 Y Y
SYNPERONIC PE/L121 Water soluble defoamer • • • 0.01-2.55%
NATROSOL Ultra High viscosity HEC • • • • 0.5-2.5 Y Y
DRILLING SPECIALTIES CO.
250 HHR-P
DSCO-DEFOAM Synthetic defoamer • • • • 0.1-0.2 Y Y NATROSOL 250 LR Ultra low viscosity Hydroxyethyl cellulose • • • • Y Y
DRILLSAFE JANEL NATROSOL LIQUID Environmental friendly anhydrous • • • • 1-5 D Y Y
MULTI DF Fresh and salt mud defoamer • • • • 0.02-0.2 HEC suspension
MULTI-DFS Silicone defoamer • • • • 0.01-0.2 NATROSOL HI-VIS Ultra High viscosity HEC • • • • 0.5-2.5 Y Y
MULTI-SODF Silicone defoamer for oil-based fluids • 0.01-0.2 ARCHER DANIELS MIDLAND
EMERY OPTIXAN D Dispersed Xathan gum biopolymer • • • • 0.25-2.0 Y
TERRADRIL DF 243 Defoamer • • • • 0.5-1.0 OPTIXAN DT Clarified Dispersed Xathan gum biopolymer • • • • 0.25-2.0 Y
TERRADRIL DF 331 Defoamer • • • • 0.5-1.0 OPTIXAN Xanthan Gum biopolymer • • • • 0.25-2.0 Y
GUMPRO OPTIXAN FG Xanthan Gum biopolymer • • • • 0.25-2.0 Y
GEL DEFOAM S Stearate based solid defoamer • • • • 0.5-2.0 ASAP FLUIDS
GEL DEFOAM A Alcoholic defoamer • • • • 0.5-2.0 • ASAP -R-VIS Solid free viscosifier • • • • 0.5 -2.0
GEL DEFOAM E Polyol Based Defoamer • • • • 0.5-2.0 ASAP-R-STARCH Modiied Starch • • • • 2-10
GEL DEFOAM Si Silicon based liquid defoamer • • • • 0.5-2.0 ASAP-R-WHITE Sizes Ground Marble • • • • As per Req.
KEMTRON TECHNOLOGIES ASAP-R-LUBE Non Damaging Lubricant • • • • 7-11
K-DEFOAM Ethylhexanol • • • • ASAP-R-BUFFER pH Buffering Agent • • • • 1-3
LAMBERTI SPA BAKER HUGHES DRILLING FLUIDS
DEFOMEX General purpose silicone based defoamer • • • • 0.05-0.5 GeoPACK Oil based gravel pack carrier system •
DEFOMEX DR5 Highly concentrate general purpose defoamer • • • • 0.05-0.5 MICRO-CURE E2 Cased hole remediation Y
DEFOMEX G9 Environmentally friendly for North Sea • • • • 0.05-0.5 Y MICRO-WASH Open hole remediation
DEFOMEX PW Powder defoamer • • • • 0.05-0.5 MPA-50 Micro-prime activator, 50% varies
DEFOMEX 42 Long chain hydroxy compound • • • • 0.05-0.5 MPA-100 Micro-prime activator, 100% varies
DEFOMEX 200 Non ionic defoamer • • • • 0.05-0.5 MUDZYME S Enzymes to degrade starch in filter cakes 0.4 gal/bbl
DEFOMEX 610/L High M.W. alcohol based • • • • 0.05-0.5 MUDZYME X Enzymes to degrade xanthan gum in filter cakes 2 gal/bbl
DEFOMEX 620 Surfactant based, highly effective • • • • 0.05-0.5 OMNI-FLOW DIF Invert Emulsion Reservoir Drill-in fluid
LAMBERTI USA PERFFLOW CM Drill-in fluid - customized bridging
DEFOMEX EG110 Stearate based defoamer • • • • 0.05-0.5 PERFFLOW DIF Drill-in fluid Y Y
DEFOMEX TA Alcohol based defoamer • • • • 0.05-0.5 PLUG-LIFT Multi-stage composite frac plug drill-out system • •
DEFOMEX SB Silicon based defoamer • • • • 0.05-0.5 PRIME 100 Wellbore OBM displacement additive Y
MAYCO WELLCHEM PRIME 759 Wellbore OBM displacement additive Y
MAYCO DEFOAM Defoamer • • • • PRIME 770 Wellbore OBM displacement additive Y
MESSINA BAROID FLUID SERVICES
FOAMFREE-A Defoamer • • • • 0.15 ALDACIDE-G Glutaraldehyde solution • • • • 0.2-0.5 Y Y
FOAMFREE-ALS Defoamer • • • • 0.15 BARABLOK Powdered gilsonite, wallcake enhancer • • • • • • 5.0-35.0 Y Y Y
FOAMFREE-DS Non-toxic, biodegradable defoamer • • • • 0.15 BARABLOK 400 Hi-temp powdered gilsonite • • • • • • 5.0-35.0 Y
FOAMFREE-PG Polypropylene-based defoamer • • • • As needed BARABUF pH buffer • • • • 0.1-2.0 Y Y Y
FOAMFREE-SH Multi-function defoamer for hard water, • • • • As needed BARACARB 5,25,50, Sized acid-soluble marble • • • • • • 5.0-60.0 Y Y Y
high saline systems 150,400,600,1200
FOAMFREE-TB Organic phosphate defoamer • • • • 0.15 BARACARB DF 5, Sized acid-soluble marble • • • • • • 5.0-60.0 Y Y Y
25, 50, 150, 600
FOAMFREE-V Vegetable based defoamer • • • • 0.15
BARACTIVE Polar activator for all-oil systems • • 4.0-7.0 Y Y Y
FOAMFREE-WF9 Defoamer • • • • 0.15
BARA-DEFOAM HP Polypropylene glycol • • • 0.05-0.3 Y
M-I SWACO
BARADRIL-N DRIL-N system, water based • • System Y
DEFOAM-A Alcohol-base defoamer • • • • 0.1-0.2 N N BARAPLUG 20, Sized salt • • 10-200 Y Y Y
DEFOAM-X Liquid low toxicity defoamer • • • • 0.05-0.10 Y N N 50, 6/300
DEFOAM NA All-purpose defoamer • • • • BRINEDRIL-N DRIL-N system, brine based • • System
DI-ANTIFOAM Antifoaming agent for the DIPRO system • 0.3 gal/bbl COREDRIL-N DRIL-N system, 100% oil/synthetic • • System
NULLFOAM Defoamer • DRIL-N STIM RDF containing additive to improve • •
SAFE-DFOAM Blended alcohol • • • 0.08-0.16 N N reservoir producibility
NEWPARK DRILLING FLUIDS DURATONE HT Oil mud filtration control additive • • 2.0-20.0 Y
NOFOAM A Alcohol-based • • • • DURATONE E Oil mud filtration control additive • • 2.0-20.0 Y Y
NOFOAM S Silicone-based • • • • EZ-CORE Fatty acid passive emulsifier for all-oil • • 1.0-4.0 Y
NOFOAM X Concentrated • • • • MAXDRIL-N DRIL-N system, mixed metal silicate • System
NOV FluidControl N-DRIL HT PLUS Modified starch • • • • 2.0-6.0 Y Y Y
ALUMINUM STEARATE Surface acting agent • • • • 0.05 Y N-PLEX Activator for N-SQUEEZE • • • • • • 4 Y
FOAM-OUT Water base mud defoamer • • • • 0.25 Y N-SEAL Inorganic LCM • • • • • • 5.0-30.0 Y
SETAC N-SQUEEZE Lost circulation material • • • • • • 8.0-40.0 Y Y Y
FOAM BREAKER Water-oil emulsion • • • • 0.25 N-VIS Biopolymer • • • • 0.5-2.0 Y
SPECIAL PRODUCTS N-VIS HI Mixed metal silicates • 1 Y
N-VIS L Liquid xanthan dispersion • • • • 0.25-3.0 Y
PRODUCT 7012 Silicone alcohol blend • • • • 1-2
N-VIS O Organophilic clay viscosifier • • 1.0-6.0
PRODUCT 7014 Low cost alcohol • • • • 1-2
N-VIS P PLUS Biopolymer/modified starch • • • • 2.0-8.0 Y Y
STRATA CONTROL SERVICES, INC.
QUICKDRIL-N DRIL-N system, modified polymer with LSRV • • System
FOAM-BLAST Concentrated liquid defoamer • • • • 0.1-2 Y
SHEARDRIL-N DRIL-N system, clay-free with modified polymers • • System
SUN DRILLING PRODUCTS SOLUDRIL-N DRIL-N system, polymer/sized salt • System
FOAM BUSTER Defoamer • • • • .010 % v/v Y Y CABOT SPECIALTY FLUIDS
TBC-BRINADD CESIUM ACETATE Density to 2.3 sg (19.2 ppg) • •
ANTI-FOAM HD Defoaming agent • • • 0.012 gal/bbl CESIUM FORMATE Density to 2.3 sg (19.2 ppg) • • E N
DEFOAM 2 Defoaming agent • • • 0.05 gal/bbl CESIUM FORMATE/ Density to 2.42 sg (20.18 ppg) • •
TETRA TECHNOLOGIES, INC. ACETATE BLEND
DEFOAM HB Defoamer • • MIXED FORMATES Densities from 1.0 sg to 2.3 sg • E Y
POTASSIUM FORMATE Density to 1.57 sg (13.0 ppg) • E Y N

56  Offshore  September 2012 • www.offshore-mag.com

 Plonor listing available

Plonor listing available

HOCNF classification

HOCNF classification
Passed LC50 test

Passed LC50 test

Synthetic fluid

Synthetic fluid
Saturated salt

usage (Ib/bbI)

Saturated salt

usage (Ib/bbI)
Nondispersed

Nondispersed
concentration

concentration
Fresh water

Fresh water
Dispersed

Dispersed
Oil-based

Oil-based
Normal

Normal
Product Product
name Description name Description
SODIUM FORMATE Density to 1.3 sg (10.8 ppg) • E Y Y CARBOSAN EF Triazine based, general purpose • • • • .01-2
CHANDLER ENGINEERING LIQUID CASING
ALPHA PLUS Poly hydroxy silicate • • • .25 - 1.0 Y LIQUID CASING Polycrystalline • • • • • • 8 Y
ALPHA THERMA DEX Modified starch • • • • 2.0-5.0 Y Y LIQUID CASING II Polycrystalline • • • • • • 6 Y
CHEMSTAR O-M SEAL Polycrystalline • • • • • • 50 Y
EXSTAR Modified corn starch for temp. • • • • 2-6 Y MAYCO WELLCHEM
STARPAK Highly derivatized starch ether • • • • 2-5 Y MAYCO CARB Viscosity, fluid loss control agent • • • • 4-8
STARPAK DP Multi-derivatized starch ether • • • • 2-5 Y MAYCO MAPP Gelling, viscosity & fluid loss control agents • • • • 4-8
STARPAK II A complexed variation of STARPAK • • • • 2-5 Y MAYCO VIS Gelling, viscocity control agent • • • • 4-8
DRILLING SPECIALTIES CO. MESSINA
CLARIZAN High viscosity clarified biopolymer • • • • 0.25-2.0 E Y Y DRILL-IN 1-bag blended drill-in fluid package • • 4-8
BIOPOLYMER KLEEN-DRILL 1-bag blended drill-in fluid package • • 6-8
DRILLZAN D Economical high viscosity biopolymer • • • • 0.25-2.0 Y Y KLEEN-DRILL-II 1-bag blended drill-in fluid package • • 3.5
BIOPOLYMER KLEEN-SAL Sized salt •
DRISPAC PLUS Dispersable HV polyanionic cellulose • • • • 0.25-2.5 Y Y KLEEN-VIS-X Supplementary viscosifier • • 0.5-1.5
REGULAR
KLEEN-ZAN Low-end rheology and hole clean agent • • 0.25-1.5
DRISPAC PLUS Dispersable LV polyanionic cellulose • • • • 0.25-2.5 Y Y
KLEEN-TROL Supplemental FLA • • 2-7 Y
SUPERLO
KLEEN-LUBE Lubricant • • 0.5 Y
DRISPAC REGULAR High viscosity polyanionic cellulose • • • • 0.25-2.5 Y Y
POLYMER REDI-DRIL 1-bag blended drill-in fluid package • • • 3 Y
DRISPAC SUPERLO Low viscosity polyanionic cellulose • • • • 0.25-2.5 Y Y M-I SWACO
POLYMER BREAKDOWN Chelant-based clean-up system
DRILLPAC HV High viscosity polyanionic cellulose • • • • 0.25-2.5 Y Y BREAKFREE Enzyme-based clean-up system
POLYMER D-SOLVER Chelant • • • To 75 vol%
DRILLPAC LV Low viscosity polyanionic cellulose • • • • 0.25-2.5 Y Y D-SOLVER D Dry Chelant • 60-80 Y
POLYMER D-SOLVER HD High density Chelant • • • 20-35% Y
FLOWZAN High viscosity biopolymer • • • • 0.25-2.0 Y Y D-SOLVER PLUS Chelant/acid blend • • • To 75 vol%
BIOPOLYMER D-SPERSE Surfactant for BREAKFREE and • • 0.25-1 vol%
GREENBASE Liquid high viscosity polyanionic cellulose • • • • 0.5-4.0 Y Y BREAKDOWN systems
DRISPAC POLYMER DI-ANTIFOAM Antifoaming agent for the DIPRO system • 0.03 gpb
GREENBASE Liquid High viscosity biopolymer • • • • 0.5-4.0 Y Y DI-BALANCE Viscosifier for the DIPRO system • 0.25-2
FLOWZAN POLYMER DI-BOOST Secondary viscosifier for the DIPRO system • 0.03-0.06 gpb
GREENBASE HEC Liquid High Viscosity hydroxyethyl cellulose • • • • 0.5-5.0 Y Y DI-INHIB Shale inhibitor for the DIPRO system • 3% by vol
POLYMER
DIPRO High-density, low-solids, divalent •
LIQUID HE-150 brine viscosifier • • • • 2.0-10.0 Y N brine RDF system
POLYMER
DI-TROL Filtration control agent for the DIPRO system • 8
GREENBASE HE-150 brine viscosifier • • • • 3.0-15.0 Y Y
DRILPLEX Diverse MMO system • •
POLYMER
DRILPLEX MMO viscosifier • • 1-3 Y
HE 150 POLYMER brine viscosifier • • • • 1.0-5.0 Y Y
DUAL-FLO FCA for the FLOPRO NT system • • • 4-6 N N Y
HE 300 POLYMER High temp. brine viscosifier • • • • 2.0-5.0 E Y Y
DUAL-FLO HT FCA for high-temperature applications • • • 2-7
HE 400 POLYMER High temp. brine viscosifier • • • • 2.0-5.0 Y Y
DUO-TEC Xanthan gum, dispersible, non-clarified • • • • 0.25-2 Y N
LIQUID DRISPAC High viscosity polyanionic cellulose • • • • 0.5-4.0 Y N
POLYMER DUO-TEC NS Xanthan gum, dispersible, clarified • • • • 0.25-2 Y N Y
LIQUID FLOWZAN High viscosity biopolymer • • • • 0.5-4.0 Y N DUO-VIS Xanthan gum, dispersible, non-clarified • • • • 0.25-2 Y N Y
BIOPOLYMER DUO-VIS L Liquified xanthan gum, non-clarified • • • • 0.25-0.5 y N
LIQUID HEC High viscosity pure hydroxyethyl • • • • 0.5-5.0 Y N DUO-VIS NS Xanthan gum, non-dispersible, • • • • 0.25-2 Y N Y
POLYMER cellulosic polymer non-clarified for use in the North Sea
EMERY DUO-VIS PLUS Xanthan gum, dispersible, non-clarified • • • • 0.25-2 Y N Y
DUO-VIS PLUS NS Xanthan gum, non-dispersible, • • • • 0.25-2 Y N Y
OMC 586 Environ.friendly carrierfluid, 100% ester • As needed
non-clarified for use in the North Sea
OMC 233 Environ.friendly carrierfluid, 100% ester • As needed
FAZE-AWAY Invert-emulsion breaker system • • Y
OMC 1049 Environ.friendly low vis. carrierfluid, 100% ester • As needed for FAZEPRO system
OMC 1000 Environ.friendly carrierfluid, 100% ester • As needed FAZEBREAK Delayed clean-up system for FAZEPRO
GUMPRO FAZE-OUT Delayed breaker system for FAZEPRO system • 3.5-4.5 Y
GEL -R-VIS Solid free viscosifier • • • • 0.5 -2.0 FAZE-MUL Emulsifier for FAZEPRO System • • 2-6 N N
GEL-R-STARCH Modiied Starch • • • • 2-10 FAZE-MUL CW Emulsifier for FAZEPRO System in cold weather • • 8-12
GEL-R-WHITE Sizes Ground Marble • • • • As per Req. FAZEPRO Reversible invert emulsion fluid system •
GEL-R-LUBE Non Damaging Lubricant • • • • 7-11 FAZE-WET Wetting agent for FAZEPRO System • • 8-12 N N
GEL-R-BUFFER pH Buffering Agent • • • • 1-3 FAZE-WET CW Wetting agent for FAZEPRO System • • 2-4
IMPACT FLUID SOLUTIONS in cold weather
StAR HIB L Organic Shale inhibitor • • • 2% - 5% Y Y FLO-PLEX Fluid loss additive for DRILPLEX System • • 2-6 Y N Y
StAR HIB CF Organic Shale inhibitor - chloride free • • • 2% - 5% Y FLOPRO NT Minimal solids, non-damaging WB RDF system • •
StAR GLYCOL SF Organic Shale inhibitor - glycol salt free • • • 2% - 5% Y FLOPRO SF Solids-free non-damaging WB RDF system • •
FLC2000 Low-invasion fluid loss additive • • • • • • 3.0-8.0 Y Y Y FLO-THRU Minimal solids, non-damaging WB RDF system • • Y
StAR FLH Seepage loss control/induced losses • • 3.0-6.0 Y Y FLO-THRU SF Solids-free non-damaging WB RDF system • • Y
KELCO OIL FIELD GROUP FLO-TROL Modified starch derivative • • • • 2-4 Y Y Y
CELPOL ESL Extreme low visc PAC • • • • 0.25-2 Y Y FLO-VIS L Non-dispersible, clarified Xanthan gum • .25-.5 gpb
CELPOL R Purified PAC high visc • • • • 0.25-2 Y Y FLO-VIS NT Non-dispersible, non-clarified Xanthan gum • • • .25-1.5
CELPOL RX Purified PAC high visc • • • • 0.25-2 Y Y FLO-VIS PLUS Premium clarified Xanthan • • • • 0.5-2.5 N N
CELPOL SL Purified PAC low visc • • • • 0.25-2 Y Y for FLOPRO NT systems
CELPOL SLX Premium purified PAC low visc • • • • 0.25-2 Y Y FLO-WATE Sized salt weighting agent for FLOPRO system • 40-60 N N
FINNFIX BOL Middle visc CMC • • • • 2-3 Y Y K-52 Non-chloride potassium supplement • • • • 1-5 N N Y
FINNFIX HC High visc CMC • • • • 2-3 Y Y for FLOPRO NT systems
FINNFIX LC Low visc CMC • • • • 2-3 Y Y KLA-CURE Hydration suppressant for FLOPRO NT systems • • • 4-8 N Y Y
FINNFIX RC Middle visc CMC • • • • 2-3 Y Y KLA-CURE II Hydration suppressant with detergent • • • 4-8 N N
XANVIS Clarified Xanthan biopolymer • • • • 0.75/2 Y Y KLA-GARD Shale inhibitor and hydration suppressant • • • 4-8 N Y Y
BIOPLOLYMER for FLOPRO NT systems
XANVIS L Refined clarified liquid xantha slurry • • • • 0.75/2 Y KLA-GARD B Salt-free KLA-GARD • • • 4-8 N N Y
KLA-STOP Liquid polyamine shale inhibitor • • • 1-4 vol%
LAMBERTI SPA
LUBE-167 Low-toxicity lubricant for FLOPRO NT system • • • • 4-16 N Y Y
LAMPAC CHL Premium grade, low viscosity, purified PAC • • • • .2-2 Y Y
LUBE-776 Lubricant for LSND muds • 1-3 vol%
LAMPAC CHR High viscosity, premium grade, purified PAC • • • • .2-2 Y Y
LUBE 945 WBM lubricant • • • • 1-3 vol%
LAMPAC EXLO Extremely low viscosity purified PAC • • • • .2-3 Y Y
LUBE XLS Extreme pressure lubricant • • • • 1-6 Y
LAMPAC LOVIS Low viscosity purified PAC, according to API/ISO • • • • .2-2 Y Y
NOVAPRO Synthetic olefin-base RDF system •
LAMPAC REGULAR High viscosity, purified PAC, according to API/ISO • • • • .2-2 Y Y
OPTITRAK 600 MDT tracer • • • • 1000 mg/l
LUBRICANT EHB Environ. friendly lubricant for heavy brines • • • • 1-3% filtrate
LUBRICANT CBR 600 Environ. friendly brine soluble lubricant • • • • 1-3% Y Y PARAPRO Paraffin-base RDF system •
FRONLUBE 100 Top range lubricant for salty environment • • • • • • 1-3% POWERVIS Biopolymer viscosifier • • 0.875-1.25 Y
FRONLUBE 200 Top range, ester based lubricant • • • • • • 1-3% SAFE-BREAK L Polymer breaker • • 1-4 N N
HYBSTAR CFA Chloride free neutralized polyamine • • • • 1-3% Y Y SAFE-BREAK S Polymer breaker • • 0.002-0.01 N N
HYBSTAR HS Cost effective, amine derivative based • • • • 1-3% Y Y SAFE-BREAK MP Internal breaker used in polymer-base fluids • • • >9 Y
PAG 102 Polyglycol shale inhibitor (low cloud point) • • • • 0.03 Y SAFE-CARB Ground marble weighting/bridging agent • • • • • • 10-50 Y N
PAG 211 Polyglycol shale inhibitor (Medium Cloud Point) • • • • 0.03 Y SAFE-CIDE Biocide • • • • 0.1-0.5 Y N
INICOR B/N Water soluble corrosion inhibitor • • • • 0.1- 3 SAFE-SOLV 148 Displacement solvent • • • • 3-10 N
INICOR C4 Phosphate based CO for completion • • • • 0.1- 3 STARGLIDE Lubricant and ROP enhancer • • • • 1-3 vol%

www.offshore-mag.com • September 2012  Offshore  57

 Plonor listing available

Plonor listing available

HOCNF classification

HOCNF classification
Passed LC50 test

Passed LC50 test

Synthetic fluid

Synthetic fluid
Saturated salt

usage (Ib/bbI)

Saturated salt

usage (Ib/bbI)
Nondispersed

Nondispersed
concentration

concentration
Fresh water

Fresh water
Dispersed

Dispersed
Oil-based

Oil-based
Normal

Normal
Product Product
name Description name Description
VERSA-OUT/ Breaker system for VERSAPRO and NOVAPRO • • Y EZ MUL 2F Oil mud emulsifier • • 2.0-12.0
NOVA-OUT EZ MUL NT Oil mud emulsifier • 2.0-12.0 Y Y
VERSA-WAY/ Invert-emulsion breaker system • • Y EZ MUL NS Oil mud emulsifier • 2.0-12.0
NOVA-WAY for VERSAPRO and NOVAPRO EZ MUL R Oil mud emulsifier • 2.0-12.0
VERSAPRO Oil-base RDF system • EZ-CORE Fatty acid passive emulsifier for all-oil • • 1.0-4.0 Y
VERSAPRO LS Low-solids oil-base RDF system FACTANT Oil mud emulsifier/filtration control agent • • 1.0-4.0 Y Y
WELLZYME A Enzyme breaker with biocide • • 2-10% N N FORMULADE Emulsifier for synthetic fluids • • 2.0-8.0
for water-base RDF fluids FORTI-MUL Oil mud emulsifier • 2.0-12.0
WELLZYME NS Enzyme breaker without biocide • • 2-10% N N INVERMUL Oil mud emulsifier • 4.0-12.0
for water-base RDF fluids
INVERMUL NT Oil mud emulsifier • 4.0-12.0 Y Y
NEWPARK DRILLING FLUIDS LE SUPERMUL Emulsifier for synthetic fluids • 2.0-12.0 Y
HIPERM Amine shale inhibitor • • • 0.3-0.6 vol% PERFORMUL Oil mud emulsifier • • 2.0-12.0 Y Y
NOV FluidControl CHANDLER ENGINEERING
CLEAN DRILL C Drill-in fluid - calcium carbonate system • • Alpha 1000 Rheology modifier • • 1.0 - 10.0
CLEAN DRILL HD Drill-in fluid (high density brines) - • Alpha 1001 Primary emulsifier • • 1.0 - 10.0
calcium carbonate system Alpha 1111 Thinner / wetter • • 1.0 - 10.0
OLEON N.V. DRILLSAFE JANEL
RADIAGREEN EBO General-purpose lubricant & ROP enhancer • • • • • • 4-6% Y N Y MULTIDET E Fresh and salt water emulsifier • • • • 0.5-0.3
RADIAGREEN Lubricant for heavy brines • • • 0.5-3% Y N Y
ECOFLUIDS
EME-SALT
RADIAGREEN RA Reservoir enhancer • • • • 0.5-1% Y N ECOMUL Primary emusilsifier • • 3-10 ppb
RADIAGREEN SL Lubricant for pH system >10 • • • 2-5% Y N Y ECOWET Secondary emulsifier • • 0.5-4 ppb
ECOHUM Oil mud viscosifier • •
PQ CORP.
EMERY
ECODRILL Silicate drilling fluid • •
TERRADRIL EM 392 Fatty acid (co-emulsifier) • • 1-5
PRIME ECO GROUP INC.
TERRADRIL EM 1122 OBM-emulsifier • • 2-10
DTS-2002 Polyalcohol no cloud point • • • • 3%-10%
TERRADRIL EM 1120 Low toxicity emulsifier • • 2-8
SKL-100 Environmental replacement for KCL • • • • 1-4
LAMBERTI SPA
PRIME PAC • • • • 0.5-4
VISCLAY-R MMO • 1/2 to 1-1/2 ALBISOL F10 Environmental friendly direct emulsifier • • 2-10% Y
EMULAM HT Emulsifier for HT conditions • • 5-12
QUARON N.V.
EMULAM PE Primary emulsifier for OBM • • 1-10
MC FLA SP Viscosifier/fluidloss reducer NA/K system • • • 4-10
EMULAM PE/S Primary emulsifier for SBM • • 1-10
MC FLA CR Viscosifier/fluidloss reducer calc.resistant • • • 4-10
EMULAM REO1 Low shear rate rheology modifier • • 0.5 - 2 Y Y
MC FVIS Solids free fluidloss additive/viscosifier • • • • 3-6
EMULAM RM Rheology modifier for OBM • • 1-4
MC ZAN XN Shear thinning viscosifier 120°C, 250°F • • • 0.25-2
EMULAM RM 77 Rheology modifier for OBM • • 1-4
MC ZAN XT Shear thinning viscosifier 150°C, 300°F • • • 0.25-2
EMULAM SE Secondary emulsifier for OBM • • 1-10
SUN DRILLING PRODUCTS
EMULAM SE/S Secondary emulsifier for SBM • • 1-10
LUBRA-GLIDE Mechanical solid spherical lubricant • • • • • • 4-6 lbs/bbl Y EMULAM WA Wetting agent for OBM • • 1.0-10
TBC-BRINADD LAMBERTI USA
GLYSOL-DRIL Drill-in fluid - glycol suspension CaCO3 • • Y EMULAM AK Primary emusifier / intermediate • • 1-10
SYSTEM
EMULAM ASB Super wetting agent for invert muds • • 1-6
AO SYSTEM Drill-in fluid - low aromatic all oil system •
EMULAM DE1 Emusifier for direct emulsions • • 1-10
THIXSAL-ULTRA Drill-in fluid - sized sodium chloride • • Y
EMULAM PC Concentrated primary emulsifier • • 1-6
SYSTEM
EMULAM PM Primary emulsifier for invert muds • 1-10
ULTRA PF SYSTEM Drill-in fluid - high temp. • Y
sized calcium carbonate EMULAM PS Primary emulsifier for synthetic based muds • • 1-10
ULTRACARB SYSTEM Drill-in fluid - sized calcium carbonate • • Y EMULAM SC Concentrated secondary emulsifier • • 1-6
EMULAM SM Secondary emulsifier for invert muds • 1-10
TETRA TECHNOLOGIES, INC.
EMULAM SS Secondary emulsifier for synthetic based muds • • 1-10
PAYZONE DIF/GP clean-up • •
EMULAM WA1 Wetting agent / primary • • 1-6
CLEANUP TRMT
EMULAM WAO Imidazoline based wetting agent • • 1-6
PAYZONE CMT-X MgCl2 cement contaminant control • •
PAYZONE DF Solids free fluid • • MESSINA
SLICK PILL KLEEN-CON Low toxicity emulsifier • • 3 Y
PAYZONE DF-CC DF using CaCO3 bridging mtl. • • Y KLEEN-MUL-L Low toxicity emulsifier • • 8 Y
PAYZONE DF-LT Low toxicity fluid • • Y KLEEN-THIN Low toxicity thinner/emulsifier • • .5-10
PAYZONE DF-SS DF using NaCl bridging mtl. • Y KLEEN-WET Low toxicity wetting agent/emulsifier • • .5-10
PAYZONE GRAVEL DIF/GP simultaneous clean-up • • MUD-MUL Oil-in-water emulsifier • • • • 1
PACK TRMT MUD-MUL-LS Emulsifier for low solids • • • 1
WEATHERFORD INTERNATIONAL LTD. MUD-MUL-S Emulsifier for salt systems • • • 1
ALPHA 4138 Emulsifier • OILCON Secondary emulsifier • 3
ALPHA 4180 Emulsifier • OILMUL-L Primary emulsifier • 8
OILTHIN Oilmud thinner • 0.5-10
EMULSIFIERS
OILVIS-PLUS Low-end rheology modifier • • 1-5
ARCHER DANIELS MIDLAND OILWET Oil wetting agent • 0.5-10
ADM 500 “Green” emulsifier, lubricity enhancer, • • 0.25-2 Y M-I SWACO
wetting agent
ACTIMUL RD Dry emulsifier and as a wetting agent in diesel • • 4-10
ADM 2100 Low viscosity “Green” emulsifier, • • 0.25-2 Y
ECOGREEN P Primary emulsifier for ECOGREEN system • 2-6 Y N
lubricity enhancer, wetting agent
ECOGREEN S Secondary emulsifier for ECOGREEN system • 2-6 Y N
ADM 750 “Green” surfactant, lubricity enhancer, • • • • 0.25-2 Y
wetting agent, secondary emulsifier EMUL HT HTHP emulsifier for VERSADRIL and • • 4-8 N N
VERSACLEAN systems
ADM 3100 Low viscosity “Green” surfactant/lubricity • • • • 0.25-2 Y
enhancer, wetting agent, secondary emulsifier FAZE-MUL Emulsifier for FAZEPRO system • • 2-6 N N
FAZE-WET Wetting agent for FAZEPRO System • • 8-12 N N
BAKER HUGHES DRILLING FLUIDS
M-I 157 Supplemental emulsifier • • 0.5-2 N N
CARBO-MUL HT High-temperature emulsifier and wetting agent • 2.9-23.8 L/m3
MEGAMUL Basic emulsifier and wetting agent • 4-8
CARBO-MUL HT-N High-temperature emulsifier and wetting • 2.9-23.8 L/m3
in the MEGADRIL system
agent for Norway
MUL HTP Primary emul. for negative alkalinity system • • 1-4 N N
CARBO-MUL LT Low-temperature emulsifier and wetting agent • 0.5-1.5 ppb
NOVAMUL Primary emulsifier & wetting agent • 2-8 N N Y
CARBO-TEC High-temperature anionic emulsifier • 14.3-40.5 L/m3
for synthetic fluids
CARBO-TEC LT Low Temp. supplemental emulsifier • Up to 14.3 L/m3
NOVAPRO P/S Primary emulsifier • 6-10
CARBO-TEC “S” Supplemental emulsifier and viscosifier • • Up to 14.3 L/m3
NOVAWET Wetting agent for synthetic muds • 1-5 N N Y
ECCO-MUL E Emulsifier for invert-emulsion systems • 12-36 L/m3
NOVATEC P Primary emulsifier for NOVATEC system • 2-6 N N
MAGMA-VERT Emulsifier for MAGMA-TEQ extreme • • 12-45 L/m3 Y
NOVATEC S Secondary emulsifier for NOVATEC system • • 2-6 N N
HPHT emulsion system
ONE-MUL emulsion stability, wetting agent, filtration • 8-10
NEXT-MUL Primary emulsifier for the NEXT-DRILL system • • 9.5-18 L/m3
control, and temperature stabilizer
OMNI-MUL High temp. emulsifier and wetting agent • • 12-36 L/m3 Y Y
OILFAZE Sacked oil-base concentrate • 50 N N
for synthetic muds
PARAMUL Primary emulsifier for OBM and • •
OMNI-MUL 2 Emulsifer for synthetic drilling fluids • • .5-1 gal/bbl
SBM PARA systems
OMNI-TEC Anioic emulsifier for synthetic drilling fluids • • 14-40 L/m3
SUREMUL Primary emulsifier for SBM systems • 6-10.2 N N Y
OMNI-VERT Supplemental emulsifier • 0.5-1.5 PPB SUREMUL EH Primary emulsifier for SBM systems • 6-10.2
BAROID FLUID SERVICES SUREMUL PLUS Primary emulsifier in RHELIANT PLUS system • 8-10
BAROMUL 290, 303 Oil mud emulsifier • 2.0-12.0 VERSACOAT Wetting agent & emulsifier • 1-8 N N
BROMI-MUL Brine-in-oil emulsifier • • 6 Y in VERSA Oil systems
DRILTREAT Oil wetting agent • • 0.25-2.0 Y Y Y VERSACOAT HF Organic surfac tant emulsifier for oil muds in HT • 1-8 N N
EZ MUL Oil mud emulsifier • 2.0-12.0 VERSACOAT NA High flash point emulsifier for oil muds • 1-8 N N

58  Offshore  September 2012 • www.offshore-mag.com

 Plonor listing available

Plonor listing available

HOCNF classification

HOCNF classification
Passed LC50 test

Passed LC50 test

Synthetic fluid

Synthetic fluid
Saturated salt

usage (Ib/bbI)

Saturated salt

usage (Ib/bbI)
Nondispersed

Nondispersed
concentration

concentration
Fresh water

Fresh water
Dispersed

Dispersed
Oil-based

Oil-based
Normal

Normal
Product Product
name Description name Description
VERSAMUL Primary emulsifier & wetting agent, liquid • 4-10 N N BIO-LOSE Complexed polysaccharide • • • • 2-4 pb Y
blend of emulsifiers, wetting agents, BIO-PAQ Organic derivative providing filtration control • • • • 1-4 ppb Y
gelling agents and fluid stabilizers BIO-PAQ AR High performance fluid loss control biopolymer • 1-4 ppb
VERSAPRO P/S Primary emulsifier, secondary wetting • 6-10 N N CARBO-TROL 375 High-temperature filtration reducer • • 2-6 ppb
agent in VERSAPRO system for CARBO-DRILL
VERSAWET Wetting agent for OBM • 1-4 N N CARBO-TROL A-9 Non-asphaltic/polymeric HTHP filtration reducer • • 5-10 ppb
NEWPARK DRILLING FLUIDS CARBO-TROL HT HT softening-point gilsonite • 2-6 ppb
CYBERCOAT Surfactant & supplimental emulifier • 0.5-2 for improved filtration control
CYBERMUL Low toxicity emulsifier • 4-6 CHEMTROL X HT filtration control agent for water-base fluids • • • 2-6 ppb
CYBERPLUS Low toxicity emulsifier • 8-12 DELTA-TROL New HT Starch for PERFFLOW system • • • • 4-7 ppb
CYBERPLUS C Concentrated • • 4-6 ECCO-PAQ LV Filtration control additive for freshwater systems • • • • 0.5-2 ppb Y
DYNAMUL 204 Oil-in-water emulsifier • • • FC-30 Flake carbonate •
OPTIMUL Organic emulsifier • 2-8 KEM-SEAL Co-polymer for high-temp. filtration control • • • • 0.25-6 ppb Y
OPTIPLUS Organic emulsifier • 2-8 KEM-SEAL PLUS Co-polymer for HT filtration control • • • • 1-2 ppb Y
OPTIWET Blend of emulsifying & wetting agents • 0.25-8 MAGMA-SEAL Fluid loss and sealing additive for • • 4-8 ppb
NOV FluidControl MAGMA-TEQ extreme HPHT emulsion system
PETRO-MUL I Primary emulsifier • 2-8 MAGMA-TROL Polymeric fluid loss additive for MAGMA- • • 0.5-7 ppb
TEQ extreme HPHT emulsion system
PETRO-MUL II Secondary emulsifier • 2-8
MAX-TROL Sulfonated resin • • • • 2-8 ppb Y
ECO-SYN PE Primary emulsifier for synthetics • 2-8
MIL-PAC LV Low-viscosity polyanionic cellulose • • • 1-4 ppb
ECO-SYN SE Secondary emulsifier for synthetics • 2-8
MIL-PAC LVT Low visc. tech-grade polyanionic cellulose • • • 0.5-2 ppb
OLEON N.V.
MIL-PAC LV PLUS Saltwater tolerant low-viscosity polyanionic • • • • 0.25-2 ppb
RADIAGREEN EBL Env. friendly ester based lubricant • • • • 0.5 - 3% Y N Y cellulose that meets API specifications
RADIAGREEN Lubricant for heavy brines • • • 0.5 - 3% Y N Y MIL-PAC R PLUS Saltwater tolerant polyanionic cellulose, • • • • 0.25-4 ppb
EME SALT regular viscosity
PRIME ECO GROUP MIL-PAC R Polyanionic cellulose, regular viscosity • • 0.25-4 ppb Y
PECOMUL 100 Wetting agent for OBM • 1-6 N N MIL-PAC RT Technical grade polyanionic cellulose, • • • 0.5-3 ppb
PECOMUL 300 Wetting agent & emulsifier • 1-8 N N regular viscosity, API spec
SPECIAL PRODUCTS MIL-PAC ULV Ultra-low visc. polyanionic cellulose • • • 0.5-2 ppb
PRODUCT 63 Wetting agent • • 1-4 MILSTARCH Pregelatinized starch • • • • 1-5 ppb Y
PRODUCT 6016 Primary emulsifier • • 2-6 NEW-TROL Sodium polyacrylate • • • • 0.5-4 ppb
PRODUCT 6050 Primary emulsifier • • 2-6 OMNI-TROL Temperature stable organo-philic lignite • • 5-10 ppb
PRODUCT 6065 Secondary complex emulsifier • • 2-6 used for filtration control
PRODUCT 6156 Secondary complex emulsifier • • • • 1-4 PERMA-LOSE HT Non-fermenting polymerized starch • • • • 1-5 ppb Y
SUN DRILLING PRODUCTS PYRO-TROL FR and lubricant in extreme HPHT • • • • 0.25-2 ppb Y
water base applications
MULSPERSE Wetting agent • • • • 0.5-1% Y
W-313 Filtration reducer for PERFFLOW system • • • 5-7 ppb Y Y
WEATHERFORD INTERNATIONAL LTD.
XCD POLYMER Bipolymer • • • • As needed E Y
ALPHA 1386 Wetting liquid, low tox.. • • 1-5
BAROID FLUID SERVICES
ALPHA 3930 Viscosifier fatty acid, low tox.. • 1-4
ADAPTA Oil mud filtration control copolymer • • 1.0-6.0 Y Y
ALPHA 6151 Lubricant/primary emulsifier, low tox.. • • 1-10
ADAPTA 450 Extreme HTHP IEF filtrate reducer • • 1.0-6.0
ALPHA 6156 Lubricant/drill oil fluid, low tox.. • • 1-10
AK-70 Asphaltic blend • • • • • • 5.0-15.0 Y
ALPHA 6177 Secondary emulsifier/surfactant • • 0.5-5
BARABLOK Powdered gilsonite, wallcake enhancer • • • • • • 5.0-35.0 Y Y Y
ALPHA 6280 Primary/secondary emulsifier, low tox.. • • 1-10
BARABLOK 400 Hi-temp powdered gilsonite • • • • • • 5.0-35.0 Y Y Y
ALPHA 6450 Oil mud thinner • 0.5-3
BARANEX Modified lignin polymer • • • 2.0-6.0 Y Y
ALPHA 6662 Primary/secondary emulsifier, low tox.. • • 1-10
BARO-TROL PLUS Shale stabilizer • • • • 2.0-6.0 Y
ALPHA 6666 Primary/secondary emulsifier, low tox.. • • 1-10
BORE-PLUS Shale inhibitor • • • 1.0-4.0 Y
WELL FLOW INTERNATIONAL
BXR Borehole stabilizer • • • • 4.0-20.0 Y
LIQUID SCRAPER Surfactant blend • • • • •
BXR-L Borehole stabilizer suspension • • • • 8.0-40.0 Y
RINSE-AID Complex surfactant blend • • • • •
CARBONOX Leonardite • • • • 2.0-12.0 Y Y Y
F I LT R AT I O N C O N T R O L A G E N T S DEXTRID Modified starch with biocide • • • • 2.0-6.0 Y
AKZO DEXTRID E Modified starch • • • • 2.0-6.0 Y Y
GABROIL PAC HIVIS PAC high viscosity, technical (improved) • • • • 0.2-3 Y DEXTRID LT Modified starch with biocide • • • • 2.0-6.0 Y
GABROIL PAC LOVIS PAC low viscosity, technical (improved) • • • • 0.2-3 Y DEXTRID LTE Modified starch with biocide • • • • 2.0-6.0
GABROIL HV PAC high viscosity, technical • • • • 0.2-3 Y DRILL STARCH Pregelatinized starch • • • • 2.0-8.0 Y
GABROIL LV PAC low viscosity, technical • • • • 0.2-3 Y DURATONE E Oil mud filtration control additive • 2.0-20.0 Y Y
GABROSA EHVT CMC extra high viscosity, technical • • • • 0.2-4 Y DURATONE HT Oil mud filtration control additive • • 2.0-20.0 Y
GABROSA HVT CMC high viscosity, technical • • • • 0.2-4 Y DURENEX PLUS Hi-temp filtration control additive • • 1.0-3.0 Y
GABROSA LVT CMC low viscosity,technical • • • • 0.2-4 Y FACTANT Oil mud emulsifier/filtration control agent • • 1.0-4.0 Y Y
STAFLO EXLO PAC low viscosity, pure • • • • 0.2-2 Y FILTER-CHEK Fermentation-resistant modified starch • • • • 1.0-5.0 Y Y Y
STAFLO REGULAR PAC high viscosity, pure • • • • 0.2-2 Y IMPERMEX Pre-gelatinized starch • • • • 2.0-8.0 Y Y Y
AQUALON LIQUITONE Liquid polymeric filtrate reducer • • 1.0-4.0 Y Y
AQUAFLO LV High viscosity Standard Polyanionic cellulose • • • • 0.25-2 Y Y N-DRIL HT PLUS Modified starch 2.0-5.0 Y Y Y
AQUAFLO HV Low viscosity Standard Polyanionic cellulose • • • • 0.25-2 Y Y PAC-L & PAC-LE Low viscosity polyanionic cellulose • • • • 0.5-3.0 Y Y Y
AQUAPAC LIQUID Environmental friendly anhydrous • • • • 0.50-4 D Y Y PAC-R & PAC-RE Regular polyanionic cellulose • • • • 0.5-2.0 Y Y Y
AquaPAC suspension POLYAC PLUS Polyacrylate • • • • 0.25-3.0 Y
AQUAPAC LV Low viscosity Premium Polyanionic cellulose • • • • 0.25-2 Y Y THERMA-CHEK High temperature filtrate reducer • • • • 1.0-8.0 Y Y
AQUAPAC REGULAR High viscosity Premium Polyanionic cellulose • • • • 0.25-2 Y Y BOYSENBLUE/CELTEC INTERNATIONAL
AQUAPAC ULV Ultra Low viscosity Premium • • • • 0.25-2 Y Y BLEN-FYBER Cellulose fiber • • • • • • 6 Y
Polyanionic cellulose BLEN-SEAL W.B. Cellulose fiber • • • • • • 6 Y
ECODURA PLONOR rated aqueous HEC suspensions • • • • 1-10 Y Y CHANDLER ENGINEERING
NATROSOL 180 GR Low viscosity Hydroxyethyl cellulose • • • • 0.25-2 Y Y Alpha AL OrganoLignite • 2.0-10.0
NATROSOL 210 HHX Ultra High viscosity and Fast hydrating HEC • • • • 0.5-2.5 Y Y Alpha Coat DF LiquidWBM filtration control • • • • .5 - 9.0
NATROSOL 250 EXR Low viscosity Hydroxyethyl cellulose • • • • 0.25-2 Y Y Alpha Coat DF PLUS Liquid hi-temp filtration control • • • • .5 - 9.0
NATROSOL 250 GXR Low viscosity Hydroxyethyl cellulose • • • • 0.25-2 Y Y CHEMSTAR PRODUCTS
NATROSOL Ultra High viscosity HEC • • • • 0.5-2.5 Y Y DRILSTAR HT High performance white starch • • • • 4 Y
250 HHR-P
DRILSTAR P Potato starch • • • • 3 Y
NATROSOL 250 LR Ultra low viscosity Hydroxyethyl cellulose • • • • Y Y
DRILSTAR High temp starch for brines • • • • 4
NATROSOL LIQUID Environmental friendly anhydrous • • • • 1-5 D Y Y SUPERTEMP
HEC suspension
DRILSTAR Y Low cost yellow starch • • • • 5 Y
NATROSOL HI-VIS Ultra High viscosity HEC • • • • 0.5-2.5 Y Y
EXSTAR Modified corn starch for temp. • • • • 2-6 Y
XXTRADURA Extreme temperatures filtration control additive • • • • 1-5 Y Y
HYDROSTAR Pegel starch for temp. and hardness • • • •
ASAP FLUIDS
PETROSTAR Pre gel starch for API/OCMA • • • • 5
ASAP PAC LV Polyanionic Cellulose Low Viscosity • • • • 0.25 -4.0 Y STARLOSE Stabilized starch • • • • 2-5 Y
Technical Grade)
STARPAK Highly derivatized starch ether • • • • 2-5 Y
ASAP CMC LV Carboxy Methyl Cellulose Low Viscosity • • • • 1.5 -3.0
STARPAK DP Miulti-derivatized starch ether • • • • 2-5 Y
ASAP CMC HV Carboxy Methyl Cellulose High Viscosity • • • • 0.25 -3.0
STARPAK EXTREME Multiderivitized starch ether for high temp • • • •
ASAP PAC RG Polyanionic Cellulose RegularTechnical Grade) • • • • 0.75 -4.5
STARPAK II A complexed variation of STARPAK • • • • 2-5 Y
ASAP RX Lignite polymer • • • • 2-10 Y
DEEP SOUTH CHEMICAL
ASAP STARCH Pregel starch • • • • 2-10 Y
DSC VIS Non-ionic pure hydroxyethyl cellulose • • 0.5-3
ASAP STARCH HT Pregel Stacrch • • • • 2-10
DRILLING SPECIALTIES CO.
BAKER HUGHES DRILLING FLUIDS
DRILLPAC HV High viscosity polyanionic cellulose • • • • 0.25-2.5 Y Y
BD-FL 44 High-temperature starch • • 2-6
POLYMER

www.offshore-mag.com • September 2012  Offshore  59

 Plonor listing available

Plonor listing available

HOCNF classification

HOCNF classification
Passed LC50 test

Passed LC50 test

Synthetic fluid

Synthetic fluid
Saturated salt

usage (Ib/bbI)

Saturated salt

usage (Ib/bbI)
Nondispersed

Nondispersed
concentration

concentration
Fresh water

Fresh water
Dispersed

Dispersed
Oil-based

Oil-based
Normal

Normal
Product Product
name Description name Description
DRILLPAC LV Low viscosity polyanionic cellulose • • • • 0.25-2.5 Y Y LAMPAC CHR High visc., premium grade, purified PAC • • • • .2-2 Y Y
POLYMER LAMPAC EXLO Extremely low viscosity purified PAC • • • • .2-3 Y Y
DRISCAL D High temperature synthetic polymer • • • • 0.5-2.5 Y Y LAMPAC LOVIS Low visc. purified PAC, according to API/ISO • • • • .2-2 Y Y
POLYMER LAMPAC REGULAR High visc., purified PAC, according to API/ISO • • • • .2-2 Y Y
DRISPAC PLUS Dispersable HV polyanionic cellulose • • • • 0.25-2.5 Y Y LAMPAC NFE-L Dispersible, premium, LV purified PAC • • • • .2-2 Y Y
REGULAR LAMPAC NFE-R Dispersible - HV, premium, purified PAC • • • • .2-2 Y Y
DRISPAC PLUS Dispersable LV polyanionic cellulose • • • • 0.25-2.5 Y Y LAMBERTI USA
SUPERLO
EMULAM FLC Liquid fluid loss control agent for OBM • • 0.5-5
DRISPAC REGULAR High viscosity polyanionic cellulose • • • • 0.25-2.5 Y Y
POLYMER LIQUID CASING Liquid fluid loss control agent for OBM • • 0.5-5
DRISPAC SUPERLO Low viscosity polyanionic cellulose • • • • 0.25-2.5 Y Y LIQUID CASING Polycrystalline • • • • • • 8 Y
POLYMER LIQUID CASING II Polycrystalline • • • • • • 6 Y
DRISTEMP POLYMER High temperature synthetic polymer • • • • 0.5-2.5 Y Y WORKOVER 2000 Non-damaging polymers • • 2 Y
DSCO FLUID LOSS Economical low viscosity polymer • • • • 0.5-3.0 Y Y WORKOVER 3000 Non-damaging polymers • • 2 Y
ADDITIVE XP-1000 Polymer visco • • • • 2 Y
GREENBASE High viscosity polyanionic cellulose • • • • 0.5-5.0 Y Y XP-2000 Polymer visco • • • • 2 Y
DRISPAC POLYMER MAYCO WELLCHEM
GREENBASE HE-150 Brine viscosifier • • • • 3.0-15.0 Y N MAYCO CARB Viscosity, fluid loss contol agents • • • • 4-8
POLYMER MAYCO FLC Fluid loss control agent • • • • 1-4
LIQUID HE-150 Brine viscosifier • • • • 2.0-10.0 Y Y MAYCO FLOW Fluid loss control agent • • • • 2-6
POLYMER MAYCO HELP Polymer temperature extender • • • • 1-5
HE-150 POLYMER Brine viscosifier • • • • 1.0-5.0 Y Y MAYCO LIVIS Liquid viscosity control agent • • • • 1-6
HE-300 POLYMER Fluid loss additve for slicate muds • • • • 1.0-5.0 Y Y MAYCO MAPP Gelling, viscosity and fluid loss control agents • • • • 4-8
LIQUID DRISPAC High viscosity polyanionic cellulose • • • • 0.5-4.0 Y N MAYCO VIS Gelling, viscosity control agents • • • • 4-8
POLYMER
MESSINA
DSCO ORGANOLIG Fluid loss additive for oil muds • • 2.0-5.0 Y Y
FILTRATE REDUCER CELTROL-LV Non-viscosifying fluid loss • • • • 2 Y
SOLTEX ADDITIVE Sulfonated asphalt for HTHP filtrate control • • • • • • 2.0-6.0 Y Y FILTRACEL Tech. grade cellulose polymer • • • 1-3 Y
POTASSIUM SOLTEX Potassium sulfonated asphalt • • • • • • 2.0-6.0 Y Y FILTROL Premium nonionic polymer • • • • 1.5 Y
ADDITIVE for HTHP filtrate control FILTROL-LV Carboxymethylated polymer • • • • 3 Y
DRILLSAFE JANEL FILTROL-PLUS Preserved hydrocolloid • • • • 1 Y
MUTICEL CMC, all grades • • • • 0.2-3 KLEEN-DRILL Viscosifier/filtration control • • 3 Y
MUTICEL R PAC HV • • • • 0.1-2 KLEEN-VIS Viscosifier/filtration control • • 6-8 Y
MUTIDRILL Modified starch polymer • • • • 0.4-2 MESUCO-CL Causticized lignite • • • 1-3
MUTISAL Carboxy-methylated polymer • • • • 0.2-1 MESUCO-CRCL Chrome/causticized lignite • • • 4 Y
MESUCO-KL Potassium/lignite • • • 3 Y
ECOFLUIDS
MESUCO-LIG Lignite • • • 3 Y
ECODRILL HT-HP filtration control • • • • 2.0-10.0 Y
OILTONE-1 Filtration agent • • 3-6 Y
ECOFCG HT gilsonite • • 2.0-10.0 Y
OILTONE-2 Non-asphaltic filtration agent • • 3-6 Y
ECOFCL Amine lignite • • 2.0-10.0 Y
OILTONE-3 HT non-asphaltic filtration agent • • 3-6 Y
ECOSTARCH High performance filtrate reducer • • • • 4-6 Y
OILTONE-4 HT non-asphaltic filtration agent • • 3-5
ECOPAC-R Filtration reducer • • • • 0.5-3.00 Y
POLYTHERM-FX HT drilling polymer • • • 1-3
ECOPAC-LV Filtration reducer • • • • 0.5-3.00 Y
POLYTHERM-FX2 HT drilling polymer • • • 3 Y
ECOLIG Thinner and filtration control additive • • • • Y
POLYTHERM-FX3 HTHP sulfonated copolymer • • • 3 Y
VULCATROL Filtration control agent • • • • 0.25-3.0 Y
POLYTHERM-FX5 HT drilling polymer • • • 1-5
ECOTEX Sulfonated asphalt • • • • • • 2-6 Y
POLYTHERM-FL HT drilling polymer • • • • 0.1-1.5 Y
GRAIN PROCESSING CORP.
REDI-DRIL Viscosifying and fluid loss agent • • • 3 Y
CONTROL I-99F Crosslinked starch • • • • 3% Y REDI-FLO Filtration agent • • • • 3 Y
CONTROL I-10F Natural white starch • • • 3-51 Y REDI-FLO-NHV Low charge filtration polymer • • • • 1 Y
CONTROL I-100 Natural white starch • • • 3-51 Y REDI-FLO-NLV Low charge filtration polymer • • • • 2 Y
CONTROL I-165 Alkaline starch polymer • • • • 3% STARFIX Non-fermenting hydrocolloid • • • 2 Y
CONTROL I-166 Alkaline starch • • • • 3% Y STARFIX-PLUS HT non-fermenting hydrocolloid • • • • 1-3 Y
GUMPRO THERMEX-FL Synthetic filtration agent • • • 1 Y
GEL PAC LV Polyanionic Cellulose Low Viscosity • • • • 0.25 -4.0 • THERMO-TROL-50 HTHP fluid loss and mud conditioner • • • 3 Y
Technical Grade) THERMO-TROL-FL • • • • 3
GEL CMC LV Carboxy Methyl Cellulose Low Viscosity • • • • 1.5 -3.0 THERMO-TROL-X Synergistic polymer conditioner • • • • 2-6
GEL CMC HV Carboxy Methyl Cellulose High Viscosity • • • • 0.25 -3.0 ULTRACEL High-purity cellulosic polymer • • • • 1 Y
GEL PAC RG Polyanionic Cellulose Regular Technical Grade) • • • • 0.75 -4.5 VISFLO-EXTRALO • • • • 1-2
GEL RX Lignite polymer • • • • 2-10 • VISPAC-LV • • • • 1-2
GEL STARCH Pregel starch • • • • 2-10 • M-I SWACO
GEL STARCH HT Pregel starch • • • • 2-10
ASPHASOL Blend of sulfonated organic resins • • • • 4-10 N N Y
IMPACT FLUID SOLUTIONS ASPHASOL D Sulfonated organic blend • • • 4-10 N N
FLC2000 Low-invasion fluid loss additive • • • • • • 4.0-8.0 Y Y Y ASPHASOL SUPREME Sulfonated asphalt • • • • 4-10 N N
StAR FLH Low-invasion fluid loss additive • • 3.0-6.0 Y Y CALOVIS FL FL Control and Secondary Viscosifier • • • 2-5
KELCO OIL FIELD GROUIP for ENVIROTHERM system
CELFLO R Semipure PAC regular • • • • 0.5-3 Y CALOVIS HT FL Control and Secondary Viscosifier • • • 2-6
CELFLO SL Semipure PAC superlow • • • • 0.5-3 Y for ENVIROTHERM system
CELPOL ESL Extreme low visc PAC • • • • 0.25-2 Y Y CAUSTILIG Causticized ground lignite • • • • 1-15 N N Y
CELPOL R Purified PAC high visc • • • • 0.25-2 Y Y DI-TROL FCA for the DIPRO system • 8
CELPOL RX Purified PAC high visc • • • • 0.25-2 Y Y DUAL-FLO FCA for the FLOPRO NT system • • • 4-6 N N Y
CELPOL SL PAC superlowPurified PAC low visc • • • • 0.25-2 Y Y DUAL-FLO HT FCA for high-temperature applications • • • 2-7
CELPOL SLX Premium purified PAC low visc • • • • 0.25-2 Y Y DURALON Filtration control high-temperature polymer • • • • 1-8 N N
FINNFIX BOL Middle visc tech CMC • • • • 2-3 Y Y ECOTROL 717D Filtration control resin for diesel •
FINNFIX H CMC high viscosity pure • • • • 0.2-3 Y Y ECOTROL L Liquid filtration control for parafinns, • • 0.5-2.0
FINNFIX HC High visc tech CMC • • • • 2-3 Y Y mineral oils and synthetic oils
FINNFIX L CMC low viscosity pure • • • • 0.2-3 Y Y ECOTROL RD Version of ECOTROL used in PARALAND system • • 2-4
FINNFIX LC Middle visc tech CMC • • • • 2-3 Y Y ECOTROL HT Synthetic Co-Polymer in all oil • • 2-4
FINNFIX RC Middle visc tech CMC • • • • 2-3 Y Y high-temperature applications
WL-100 Sodium polyacrylate fluid loss additive • • • 0.25-1 Y FILTER FLOC Chemical filtration aid
KEMTRON TECHNOLOGIES FLODENSE AP High density displacing fluid for casing • Y
pressure remediation
KEM-PAS N Anionic polymer, powder • • • •
FLO-PLEX Filtration control additive • • 2-6 Y N Y
Z-TROL Polyacrylamide, powder, HTHP • • • for the DRILPLEX system
LAMBERTI SPA FLO-PLEX PLUS Filtration control additive • • 2-6
CARBOCEL EHV Extra high visc. CMC according to API/ISO • • • • .2-4 Y Y for the DRILPLEX system
CARBOCEL HV High viscosity technical grade CMC • • • • .2-4 Y Y FLOPRO CT Coiled tubing drilling / intervention fluid • • • 8.5-9.5 Y
CARBOCEL LV Low viscosity CMC according to API/ISO • • • • .2-5 Y Y FLO-TROL Starch derivative for FLOPRO NT systems • • • • 2-4 Y Y Y
CEPAC LOVIS Low viscosity technical grade PAC • • • • .2-3 Y Y HIBTROL FCA & secondary shale inhibitor • • • 1-5 Y N
CEPAC REGULAR High viscosity technical grade PAC • • • • .2-3 Y Y HIBTROL HV FCA & secondary shale inhibitor • • • 1.4-7 N N
EMULAM FC Liquid fluid loss reducer for OBM • • 1-10 HIBTROL ULV Ultra-low vis FCA and secondary shale inhibitor • • • 2.1-7
HYSOPOL FL High temp. polymeric FR (up to 300°F) • • • • 1-10 Y K-17 Potassium causticized lignite • • • • 1-15 N N Y
K PAC LOVIS Potassium low viscosity PAC • • • .2-3 Y Y KLAFLOC II Cationic fliltration control for floc water drilling • 1-2
K PAC REGULAR Potassium high viscosity PAC • • • .2-3 Y Y LO-WATE Acid soluble, powdered calcium carbonate • • • • • • 10-40 N N
LAMPAC CHL Premium grade, low visc., purified PAC • • • • .2-2 Y Y M-I 157 Supplemental emulsifier • • 0.5-2 N N

60  Offshore  September 2012 • www.offshore-mag.com

 Plonor listing available

Plonor listing available

HOCNF classification

HOCNF classification
Passed LC50 test

Passed LC50 test

Synthetic fluid

Synthetic fluid
Saturated salt

usage (Ib/bbI)

Saturated salt

usage (Ib/bbI)
Nondispersed

Nondispersed
concentration

concentration
Fresh water

Fresh water
Dispersed

Dispersed
Oil-based

Oil-based
Normal

Normal
Product Product
name Description name Description
M-I PAC R Pure PAC polymer, technical grade • • • 2-5 Y Y PRIME ECO GROUP INC.
M-I PAC UL Pure PAC polymer, low viscosity • • • 2-5 Y Y DT-SAS Sulfonated asphalt • • • • 4-10 N N Y
MEGATROL Filtration control in Diesel based systems • 0.5-3 PERFOREX-XP Propietary HTHP for OBM • • • • 0.2-8 Y
MUL HTP Primary emulsifier for negative alkalinity system • • 2-6 N N QUICK SLIP Chemically reacted cellulose • • • • 0.2-8 Y
MY-LO-JEL Pregelatinized corn starch • • • • 4-8 Y Y TRUE SEAL Filtration control additive for depleted zones • • • • • • 4-6 ppb Y
OILFAZE Sacked oil-base concentrate • 50 N N PT. INDOBENT WIJAYA MINERAL
ONETROL HT Amine-treated tannin • • 4 - 10 INDOBENT Bentonite (API 13A) • • 15-25 Y
PARATROL HT High-temperature gilsonite • QUARON N.V.
PERF-N-PEEL WBM FL/damage control system • • MC CMS HV Carboxy methylated starch hivis • • • • 3-7
for perforated completions MC CMS LV Carboxy methylated starch lovis • • • • 3-7
POLYPAC ELV Extra-low viscosity PAC • • • • 0.5-2 Y N MC DS Drilling starch • • • • 3-7
POLYPAC R Polyanionic cellulose • • • • 0.5-2 Y Y Y MC DS FR Drilling starch non fermenting • • • • 3-10
POLYPAC SUPREME R PAC, premium grade • • • • 0.5-2 Y N MC DS HT Modified starch, 160° C, 320° F • • • • 4-10
POLYPAC PAC, premium grade, ultra-low viscosity • • • • 0.5-2 Y N MC DS HV Modified starch, high viscous • • • • 2-5
SUPREME UL MC DS MT Modified starch, 140° C, 280° F • • • • 4-10
POLYPAC UL PAC, ultra low-viscosity • • • • 0.5-2 Y N MC PAC PL Pure ultralovis PAC • • • • 2-5
POLY-SAL Non-fermenting starch • • • • 2-6 N N Y MC PAC PLE Pure ultralovis PAC equivalent • • • • 2-5
POLY-SAL HT High-quality, preserved polysaccharide • • • • 2-6 MC PAC PR Pure regular PAC • • • • 2-5
POLY-SAL T Non-fermenting tapioca starch derivitive • • • • 2-6 N N MC PAC TL Techn.ultralovis PAC • • • • 2-5
RESINEX High-temperature synthetic resin • • • • 2-6 N N Y MC PAC TLE Techn.ultralovis PAC equivalent • • • • 2-5
RESINEX II High-temperature synthetic resin • • • • 2-10 N N MC PAC TR Technical regular PAC • • • • 2-5
RESINEX EH High-temperature synthetic resin • • • • 2-10 N N MC POL HT Modified synth.polymer 200° C, 400° F • • • 4-8
SAFE-CARB Sized ground marble • • • • • • 10-50 Y N SETAC
SAFE-LINK Filtration control agent for completion fluid systems • .5 pail/perf ft N N BOREMASTER HT/HP FLC, shale stabilizer • • • • • • 1-6 Y
SAFE-LINK 110 Filtration control agent for completion fluid systems • .5 pail/perf ft N N Boremaster OB Non Asphaltic HT/HP FLC • 2 to 20
SAFE-LINK 140 Filtration control agent for completion fluid systems • .5 pail/perf ft N N Boremaster HT Extreme temperature HT/HP FLC • • • • • 2 to 10
SAFE-VIS Brine viscosifier • • • • 0.5-4 Y N
SPECIAL PRODUCTS
SAFE-VIS E Liquid viscosifier for brines • 5-10 Y N
PRODUCT 63 Wetting agent • • 1-4
SAFE-VIS HDE Liquid viscofier for high-density brines • • • 14-29 N N
PRODUCT 243 Wetting agent - fluid loss • • 1-4
SAFE-VIS LE Liquid viscosifier for brines • 0.6-1.2 gpb
Special Plug
SAFE-VIS OGS Specially formulated liquid HEC • .6-1.2 gpb
Special Seal
SHALE-CHEK Shale control additive • • • • 5 N N
STRATA CONTROL SERVICES, INC.
SP-101 Sodium polyacrylate polymer • • • • 0.5-2 N N Y
TANNATHIN Ground lignite • • • • 1-15 N N Y STRATA-SCM FINE Blended micronized cellulose fiber • • • • • • 2-6 Y
THRUCARB Carbonate for the FLOTHRU system • • 5-12 STRATA-TROL Precoupled gilsonite/resin • • • • • • 2-6 Y
THRUTROL Organic starch for the FLOTHRU system • • 10-15 SUN DRILLING PRODUCTS
TROL-PLEX Modified starch • 4-6 BLACKNITE Multi-particle sealing in liquid dispersion • • • • 1-2% Y
UNIPAC SUPREME R Dispersible high-viscosity PAC • • • • 0.25-1 C-MUL (PAO) PAO ROP enhancer • • • • 3% Y
UNIPAC SUPREME UL Dispersible regular-grade PAC • • • • 0.25-1 COASTALUBE (PAO) PAO-based lubricant and ROP enhancer • • • • 3% Y
UNITROL Improved version of THERMPAC • • • • .25-1.5 GUMBO SHIELD Gumbo inhibitor • • • • 3% Y
VERSALIG Amine-treated lignite • 2-12 Y N Y SX-PLUS Carbon seepage loss agent • • • • 3-6 lbs/bbl Y
VERSATROL Naturally occurring gilsonite • 2-8 Y N TBC-BRINADD
VERSATROL HT High-temperature gilsonite • 2-8 FL-7 PLUS Derivatized starch • • • 1-6
VERSATROL M Medium softening point Gilsonite • 2-8 AO-FLA-LC Filtrate reducer/secondary viscosifier
VERSATROL NS Lignite/Gilsonite blend for HTHP filtration • 2-8 AO-FLA-L Filtrate reducer
VINSEAL FCA & electrical stability additive • • • • • 2-20 FORMATROL Derivatized starch • 5
XP-20 K Potassium causticized chrome lignite • • • 1-15 N N Y THERMASAL A Aanhydrous salt antioxidant • • • 1.0
XP-20 N Chrome lignite, neutralized • • • 1-15 N N THERMASAL B Fine grind magnesia compound • • • 2-5
MONTELLO THERMACARB High temperature stabilizer • • • 1-6
MON PAC Polyanionic cellulose • • • • 0.25-2 Y CM-TH Pretreatment for cement contamination 2-5
MON PAC ULTRA LO Polyanionic cellulose • • • • 0.25-2 Y GLYSOL Derivatized starch 6-10
NEWPARK DRILLING FLUIDS GLYSOL SF 400M High molecular weight polyethylene glycol • • •
CYBERSEAL Fiberous seepage control agent • • 2-5 POLYTEX AHT Organic polymer • • • 3-7
CYBERTROL Polymeric HTHP filtration control agent • 1-5 TETRA TECHNOLOGIES, INC.
DEEPDRILL INHIBITOR Proprietary HPWB shale inhibitor • • • • 3-20 vol% ACTIVIS Liquid viscosifier • •
DYNAFIBER Micronized cellulose • • • • • • BIOPOL Dry viscosifier • •
DYNALOSE CM Modified starch • • • • BIOPOL HT Dry viscosifier • •
DYNALOSE W White starch • • • • 2-6 BIOPOL L Liquid viscosifier • •
DYNALOSE Y Yellow starch • • • • 2-6 CT FOAM Coil tubing additive • •
DYNANITE Gilsonite • • • • • • 2-6 HYDROGEN PEROXIDE Oxidizer • •
DYNAPLEX Resin • • • • 1-8 PAYZONE 750 Temperature stabilizer • •
NEWEDGE High-grade leonardite • • • • • • 2-10 PAYZONE HPS High performance starch • • • •
NEWLIG Lignite • • • • 2-10 PSEUDOPOL Synthetic polymer • • •
NEWPAC LV Polyanionic cellulose • • • • 0.25-2 PSEUDOPOL D Synthetic polymer • • •
NEWPAC R Polyanionic cellulose • • • • 0.25-2 PSEUDOPOL HT Dry viscosifier • • •
NEWPHALT Sulphonated asphalt • • • • • 2-4 PSEUDOPOL HT Liquid Hi prof liquid viscosifier • • •
NEWSPA Polyacrylate • • • • TETRAVIS Dry HEC polymer • •
OPTI G Gilsonite • • • • • • 2-6 TETRAVIS BREAKER Viscosity breaker • •
OPTILIG Amine treated lignite • • 1-12 TETRAVIS EXTENDER Temperature stabilizer • •
OPTITROL Polymeric HTHP filtration control agent • 1-5 TETRAVIS L Liquid HEC polymer • •
NOV FluidControl TETRAVIS L PLUS Double strength liquid HEC viscosifier • •
AMZINC VIS I Liquid viscosifier • 3% TURBO-CHEM INTERNATIONAL
AMZINC VIS II Liquid viscosifier • 3 PREMIUM SEAL Micronized cellulose fiber • • • • • • 4 Y
AMZINC VIS III Liquid viscosifier • 3 TURBO-PHALT Gilsonite/resin • • • • 4 Y
AQUA-FILM CM Carboxymethyl starch • • • • 2-6 Y VENTURE CHEMICALS
CMC HV Carboxymethyl cellulose • • • • .2-2 VEN-CHEM 208 Organolignite (350° F) • 2-10 Y
PETRO-GIL Asphalt • • • • • • 1-6 VEN-CHEM 215 Organolignite (300° F) • 2-10 Y
MAGMA FIBER Lost circulation material • • • • 0.5-25 VEN-CHEM 222 Organolignite (400° F) • 2-10 Y
NOV CARB C Calcium carbonate • • • • • • WEATHERFORD INTERNATIONAL LTD.
NOV CARB F Calcium carbonate • • • • • • DRILL-IT 300 Anionic drilling polymer • • 0.25-1 lb/bbl
NOV CARB M Calcium carbonate • • • • • • DRILL-IT 315 Anionic drilling polymer • 0.5-3 lb/bbl
NOV LIG Lignite • • • • 2 -6 DRILL-IT 500 Anionic drilling polymer • 0.5 lb/bbl
NOV PAC LV Polyanionic cellulose • • • • 0.5-2 Y FLOCCULANTS
NOV PAC Polyanionic cellulose • • • • 0.5-1 Y
BAKER HUGHES DRILLING FLUIDS
ECO-SYN FLR Filtration control additive • • 1-6 Y
NOV TROL Viscosifier - liquid • • 0.25-4 MF-1 High molecular weight non-ionic •
selective flocculant
NOV XAN D Viscosifier - dry powder • • 0.25-4
WELL WASH 100 Casing wash for water-based fluids • • 2-20%
POLY-SPA Sodium polyacrylate • • • • 1-2
WELL WASH 120 Casing wash for water-based fluids • • 2-20%
PETRO-GIL Liquid Liquid gilsonite blend • • • • 4-6
WELL WASH 400 Casing wash for oil and synthetic mud • • • 2-20%
AQUA-FILM CM Carboxymethyl starch • • • • 2-6 Y
WELL WASH 2000 Casing wash for oil and synthetic mud • • • 2-20%
AQUA-FILM HT High temperature fluid loss agent • • 2-6 Y
WELL WASH 2020 Casing wash for oil and synthetic mud • • • 2-20%
STARTROL Sulfonated asphalt blend • • • • 2-6

www.offshore-mag.com • September 2012  Offshore  61

 Plonor listing available

Plonor listing available

HOCNF classification

HOCNF classification
Passed LC50 test

Passed LC50 test

Synthetic fluid

Synthetic fluid
Saturated salt

usage (Ib/bbI)

Saturated salt

usage (Ib/bbI)
Nondispersed

Nondispersed
concentration

concentration
Fresh water

Fresh water
Dispersed

Dispersed
Oil-based

Oil-based
Normal

Normal
Product Product
name Description name Description
WELL WASH 2050 Casing wash for oil and synthetic mud • • • 2-20% GALACTASOL 284 Self hydrating dispersible straight guar • • • • 0.25-2 Y Y
BAROID FLUID SERVICES GALACTASOL 286 Diesel slurriable high viscosity guar • • • • 0.25-2 Y Y
BARAFLOC Flocculant for drilling fluids • 0.01-0.25 Y GALACTASOL 288 Fast Hydrating High Viscosity guar • • • • 0.25-2 Y Y
CLAY GRABBER Liquid flocculant for HYDRO-GUARD • • • • 0.5-2.0 Y GALACTASOL 289 Fast Hydrating High Viscosity guar • • • • 0.25-2 Y Y
CRYSTAL-DRIL Flocculant for clear water drilling • • • 0.2-1.0 GALACTASOL 290 Fast Hydrating High Viscosity guar • • • • 0.25-2 Y Y
ENVIRO-COG C Inorganic coagulant • • • • 0.05-1.0 GALACTASOL 467 Diesel slurriable Hydroxypropyl guar • • • • 0.25-2 Y Y
ENVIRO-COG S Inorganic coagulant • • • • 0.05-1.0 GALACTASOL 474 High viscosity Hydroxypropyl guar • • • • 0.25-2 Y Y
ENVIRO-FLOC 104 Polymeric flocculant • • • • 0.01-0.25 GALACTASOL 476 Buffered High viscosity Hydroxypropyl guar • • • • 0.25-2 Y Y
ENVIRO-FLOC 109 Polymeric flocculant • • • • 0.01-0.25 GALACTASOL 477 Self hydrating dispersible Hydroxypropyl guar • • • • 0.25-2 Y Y
EZ-FLOC Flocculant blend • • • • 0.01-0.25 GALACTASOL 638 Fast hydrating high viscosity • • • • 0.25-2 Y Y
FLO-CLEAN MD Flocculant for calcium brines 1-3 vol% Carboxymethyl Hydroxypropyl guar
FLO-CLEAN Z Flocculant for zinc brines 1-3 vol% GALACTASOL 650 Carboxymethyl Hydroxypropyl guar • • • • 0.25-2 Y Y
with adipic acid
CABOT SPECIALTY FLUIDS
GALACTASOL 651 Carboxymethyl Hydroxypropyl guar • • • • 0.25-2 Y Y
4MATE-VIS-HT HT formate viscosifier • 5-8 NC Y
GALACTASOL 653 Diesel slurriable Carboxymethyl guar • • • • 0.25-2 Y Y
KELCO OIL FIELD GROUP
NATROSOL 210 HHX Ultra High viscosity and Fast hydrating HEC • • • • 0.5-2.5 Y Y
BEN-EX Bentonite extender selective flocculant • • 0.025-0.04 Y NATROSOL Ultra High viscosity HEC • • • • 0.5-2.5 Y Y
FINNPOL 35 Partly hydrolized acrylamide • • • 0.1-2 250 HHR-P
FINNPOL 215 PHPA high m. w. • • • 0.2 NATROSOL LIQUID Environmental friendly anhydrous • • • • 1-5 D Y Y
FINNPOL 320 PHPA extreme high m. w. • • • 0.2 HEC suspension
MF-1 Polyacrylamide (nonionic) • • • • 0.02-0.04 Y NATROSOL HI-VIS Ultra High viscosity HEC • • • • 0.5-2.5 Y Y
MF-55 Polyacrylamide ( nonionic) liquid • • • • 0.02-0.04 Y ARCHER DANIELS MIDLAND
KEMTRON TECHNOLOGIES OPTIXAN D Dispersed Xathan gum biopolymer • • • • 0.25-2.0 Y
KAN-FLOC 506P Polyacrylamide, powder, low charge • • • 0.1 to 0.3 OPTIXAN DT Clarified Dispersed Xathan gum biopolymer • • • • 0.25-2.0 Y
KAN-FLOC E50 Polyacrylamide, emulsion, low charge • • • • 0.1 to 0.3 OPTIXAN Xanthan Gum biopolymer • • • • 0.25-2.0 Y
KAN-FLOC 1000DW Polyacrylamide, powder, low charge • • • 0.1 to 0.3 OPTIXAN FG Xanthan Gum biopolymer • • • • 0.25-2.0 Y
KAN-FLOC 2000DW Polyacrylamide, powder, low charge • • • 0.1 to 0.3 ASAP FLUIDS
KAT-FLOC F97 Polyacrylamide, powder, med. charge • • • 0.1 to 0.3 ASAP TEX CP Modified gum • • • • 2-5
KAT-FLOC E8607 Polyacylamide, emulsion, high charge • 0.1 to 0.3 ASAP ZAN Xanthan Gum • • • • 0.5-2.0 •
KAT-FLOC 1600XX Polyacylamide, emulsion, high charge • 0.1 to 0.3 ASAP BEN Bentonite • • • • 10-30 •
POLY-KEM D Polyacrylamide, Powder, med. charge • • • • 0.25 to 1.0 BAKER HUGHES DRILLING FLUIDS
POLY-KEM L Polyacrylamide, emulsion, med. charge • • • • 0.5 to 2.0
BENEX Bentonite extender 2 lb/5-8
LAMBERTI SPA banf sacs
DRILLAM EL PHPA shale inhibitor • • • • 0.3-3 CARBO-GEL Organophilic clay for solids suspension • • 1-5
MESSINA CARBO-GEL II Quick-yielding organophilic clay • • 4-8
KLEEN-SWEEP Water clarifier • • • 3.5 for solids suspension
POLY-BEN Bentonite extender • • • 0.01-0.03 MAGMA-GEL Organophilic clay for MAGMA-TEQ • •
POLY-BEN-L Bentonite extender • • • 0.01-0.05 extreme HPHT emulsion system
POLY-FLOC Flocculant in liquid or powder form • • • 1 MAGMA-GEL SE Suspension Enhancer for MAGMA-TEQ • •
M-I SWACO extreme HPHT emulsion system
MILGEL Wyoming bentonite meeting API specifications • • • • 0-25 Y
FILTER FLOC Deflocculant • • 1 dm/100bbl
MILGEL NT Untreated Wyoming bentonite meeting API specs • • • • 0-25 Y
FLOXIT Organic flocculant • • 0.1-2 N N Y
OMNI-PLEX High-performance, anionic, synthetic polymer • •
GELEX Polymer bentonite extender • • 0.05-0.2 N N Y
PLUG-DRILL LX Viscosifier for plug drill-outs • • .4-.5 gal/bbl
KLA-FLOC I Low-cost shale inhibitor for floc water drilling • • 1-4 vol%
PRIME VIS HT Viscosifier for high temperature displacements
KLA-FLOC II Cationic flocculant for flow water drilling • • 1-2
QUICK VIS Liquid brine viscosifier - multi-salt systems • • As needed E Y
POLY-PLUS High m. w. PHPA polymer • • • 0.5-4 Y N Y
QUICK VIS HT Liquid brine viscosifier - HT environment • • As needed
POLY-PLUS DRY Dry PHPA polymer • • • .25-2 N N
RHEO-CLAY Fast yielding organophilic clay • • 2-4
POLY-PLUS LV Low-viscosity PHPA polymer • • • .25-2 N N
for RHEO-LOGIC deepwater system
POLY-PLUS RD Readily dispersible powdered high m. w. PHPA • • • 0.5-4 Y N Y
RHEO-CLAY PLUS Temperature-stable organophilic clay • • 2-4
SAFE-FLOC I Surfactant / flocculant solvent blend • • 0.01-2% N N for RHEO-LOGIC deepwater system
SAFE-FLOC II Surfactant / solvent blend • • 0.01-2% N N SALT WATER GEL Attapulgite clay meeting API specifications • • • 20 Y
NEWPARK DRILLING FLUIDS SUPER-COL Exrta-high-yield bentonite • • 0.5-5 Y
NEWPHPA PHPA • • • • 0.2-2 ULTRAVIS Liquid brine viscosifier -single salt systems • • As needed E Y
NEWPHPA D PHPA • • • • 0.25-1 VIS Pure synthetic polymer • • • • 0.2-4.0
NEWPHPA DLMW Low molecular weight anionic PHPA • • • • 1-3 W.O. 21 Hydroxethyl cellulose • • • • 1-3
NEWPHPA DSL Very low molecular weight PHPA • • • • 1-4 W.O. 21L Liquid HEC viscosifier • • • • .15-2.1 gal/bbl
NOV FluidControl W.O. 21LE Liquid HEC viscosifier for workover • • • 0.3-1 gal/bbl
TRU-FLUSH Surfactants and flocculants • • • • • 0.55 Y fluids - environmentally safe
ISO-DRILL RD Nonionic PHPA • • • 0.5-0.2 Y W.O. 21 LE PLUS Liquid HEC in environmentally friendly base • • • 0.3-1 gal/bbl
SPECIAL PRODUCTS XAN-PLEX Xanthan gum polymer • • • • 0.2-2 Y
PRODUCT 1020 Zinc Chloride Flocculunt • • • • 1-4 XAN-PLEX C Clarified Xanthan gum polymer • • • • 0.2-2
TETRA TECHNOLOGIES, INC. XAN-PLEX eL Clarified Xanthan gum polymer • • 0.5-3.0
TETRA DIRT MAGNET Well bore cleaner • • • • • • XAN-PLEX D Xanthan gum polymer • • • • 0.2-2 Y
WELL FLOW INTERNATIONAL
XAN-PLEX L Liquid xantham gum polymer 0.5-3.5
XAN-PLEX T Technical grade xanthan gum polymer
DIRT MAGNET Alcohol/surfactant blend • • • • • Y
XAN-PLEX TD Technical grade dispersed xanthan gum polymer
DIRT MAGNET E Solvent/surfactant blend • • • • E
XCD POLYMER Fresh or brine-water viscosifier • • 0.5-3.0 E Y
HOGWASH Solvent/surfactant blend • • • • •
BAROID FLUID SERVICES
FRICTION REDUCER FOR COIL TUBING AQUAGEL Wyoming bentonite • • • • 5.0-25.0 Y Y Y
DRILLING SPECIALTIES CO. AQUAGEL GOLD SEAL Untreated Wyoming bentonite • • • • 5.0-25.0 Y Y Y
HE 150 POLYMER Friction reducer • • • • 0.1-0.2 Y Y BARACTIVE Polar activator for all-oil systems • • 4.0-7.0 Y Y Y
LIQUID HE-150 Friction reducer • • • • 0.1-0.2 Y N BARAPAK Oil-soluble polymer • • 2.0-3.0 Y
POLYMER BARARESIN-VIS Oil mud viscosifier • • • 3-20
GREENBASE Friction reducer • • • • 0.1-0.2 Y Y BARAVIS Modified cellulose • • • • 1-3 Y Y
HE-150 POLYMER BARAZAN Xanthan gum • • • • 0.1-2.0 Y Y Y
GELLING AGENTS/ VISCOSIFIERS BARAZAN D Dispersion enhanced xanthan gum • • • • 0.1-2.0 Y Y
AKZO NOBEL BARAZAN L Xanthan suspension • • • • 0.5-4.0 Y Y
GABROIL PAC HIVIS PAC high viscosity technical (improved) • • • • 0.2-3 Y BARAZAN D PLUS Premium dispersion-enhanced xanthan • • • • 0.1-2.0 Y Y Y
GABROIL HV PAC high viscosity technical • • • • 0.2-3 Y BAROLIFT Synthetic monofilament fiber • • • • • • 0.1-0.5 Y Y
GABROSA EHVT CMC extra high viscosity techncal • • • • 0.2-4 Y BORE-VIS II Modified bentonite-BOREMAX system • 5.0-15.0
GABROSA HVT CMC high viscosity technical • • • • 0.2-4 Y BROMI-VIS Pre-dispersed polymer suspension • • 5.0-20.0 Y
STAFLO REGULAR PAC high viscosity pure • • • • 0.2-2 Y GELTONE Oil mud viscosifier • • 2.0-5.0 Y
AQUALON GELTONE II Oil mud viscosifier • • 2.0-15.0 Y Y
GELTONE V Oil mud viscosifier • • 1.0-15.0 Y
AQUAFLO HV Low viscosity Standard Polyanionic cellulose • • • • 0.25-2 Y Y
LIQUI-VIS EP Non-ionic polymer dispersion • • • • 0.2-9.0 Y
AQUAPAC LIQUID Environmental friendly anhydrous • • • • 0.50-4 D Y Y
AquaPAC suspension MUD GEL Treated, premium grade sodium bentonite • • • • 2.0-25.0
AQUAPAC REGULAR High viscosity Premium Polyanionic cellulose • • • • 0.25-2 Y Y N-VIS Biopolymer • • • • • • 1.0-3.0 Y
ECODURA PLONOR rated aqueous HEC suspensions • • • • 1-10 Y Y N-VIS HI Mixed metal silicates • 1 Y
GALACTASOL 251 High viscosity straight guar • • • • 0.25-2 Y Y N-VIS HI PLUS Mixed metal silicate complex • 0.5-2.0 Y
GALACTASOL 252 Straight guar • • • • 0.25-2 Y Y N-VIS L Liquid xanthan gum • • • • 0.2-9.0 Y
GALACTASOL 267 Diesel slurriable guar • • • • 0.25-2 Y Y N-VIS O Organophilic clay • • 1.0-6.0
N-VIS P PLUS Polymer Blend • • • 1.0-4.0 Y Y Y

62  Offshore  September 2012 • www.offshore-mag.com

 Plonor listing available

Plonor listing available

HOCNF classification

HOCNF classification
Passed LC50 test

Passed LC50 test

Synthetic fluid

Synthetic fluid
Saturated salt

usage (Ib/bbI)

Saturated salt

usage (Ib/bbI)
Nondispersed

Nondispersed
concentration

concentration
Fresh water

Fresh water
Dispersed

Dispersed
Oil-based

Oil-based
Normal

Normal
Product Product
name Description name Description
RHEMOD L Modified fatty acid • • 1.0-4.0 Y Y GEL ZAN Xanthan Gum • • • • 0.5-2.0 •
RHEOBOOST Oil mud viscosifier • • 0.5-4.0 Y GEL BEN Bentonite • • • • 10-30 •
RM-63 Rheology modifier • • 0.5-2.0 Y Y KELCO OIL FIELD GROUP
SUSPENTONE Organophilic clay • • 0.1-5.0 Y Y BIOZAN Welan gum • • • • 0.75-2 Y
TAU-MOD Amorphous/fibrous material • • 0.5-5.0 Y Y CELPOL R Purified PAC high visc • • • • 0.25-2 Y Y
TEMPERUS Modified fatty acid • • 0.25-2.5 Y Y CELPOL RX Purified PAC high visc • • • • 0.25-2 Y Y
THERMA-VIS Synthetic inorganic viscosifier • • • • 1.0-4.0 Y Y CELPOL SL Purified PAC low visc • • • • 0.25-2 Y Y
X-TEND II Bentonite extender • • • • 0.01-0.05 Y CELPOL SLX Premium purified PAC low visc • • • • 0.25-2 Y Y
VIS-PLUS Organic viscosifier • • 1.0-5.0 Y FINNFIX BOL Middle visc tech CMC • • • • 2-3 Y Y
ZEOGEL Attapulgite • • • • 5.0-30.0 Y Y Y FINNFIX HC High visc tech CMC • • • • 2-3 Y Y
BOYSENBLUE/CELTEC INTERNATIONAL FINNFIX LC Low visc tech CMC • • • • 2-3 Y Y
SPUD SEAL Viscosifier and hole cleaner • • • • • • 30 Y FINNFIX RC Middle visc tech CMC • • • • 2-3 Y Y
CABOT SPECIALTY FLUIDS GEOVIS XT Diutan temperature tolerant bipolymer • • • • 0.4-1.5 Y
4 MATE-VIS-HT High temperature formate viscosifier • 4-8 KELZAN L Liquid xanthan slurry • • • • 0.75-2 Y Y
CHANDLER ENGINEERING KELZAN XC POLYMER Xanthan gum biopolymer • • • • 0.75-2 Y Y
ALPHA D1 OrganoClay • 1.0-5.0 KELZAN XCD Dispersible xanthan biopolymer • • • • 0.75-2 Y Y
POLYMER
ALPHA VIS 7 Liquid OBM Viscosifier • • .5 - 3.0
XANVIS L Refined clarified liquid xanthan slurry • • • • 0.75-2 Y
ALPHA PLUS Poly Hydroxy Silicate • • .25 - 1.0 Y
XANVIS POLYMER Clarified xanthan biopolymer • • • • 0.75-2 Y Y
CHEMSTAR PRODUCTS
LAMBERTI SPA
EXSTAR HT HT viscosifier • • • • 5 Y
STARPAK Carboxy methyl starch • • • • 5 BIOLAM XG L Liquid xanthan gum viscosifier • • • • 0.2-2 Y
STARPAK II Carboxy methyl starch • • • • 4 BIOLAM XG Xanthan gum viscosifier • • • • 0.2-2 Y
STARPAK DP Carboxy methyl starch • • • • 4 BIOLAM XT Biopolymer derivative viscosifier • • • • 0.2-2 Y
CARBOCEL EHV Extra high visc. CMC according to API/ISO • • • • 0.2-4 Y Y
CRODA
CARBOCEL HV High viscosity technical grade CMC • • • • 0.2-4 Y Y
HYPERMER A70 Emulsifier for oil based muds • • 1-5%
CEPAC REGULAR High viscosity technical grade PAC • • • • 0.2-3 Y Y
HYPERMER B246SF Emulsifier for oil based muds • • 1-5%
DRILLAM EL Liquid PHPA • • • • 0.3-3
DEEP SOUTH CHEMICAL EMULAM RM Rheology modifier for OBM • • 1-4
ARDS Spacer Mix A mixture of clays and polymer • • EMULAM RM 77 Rheology modifier for OBM • • 1-4
ARDS 85 Gel -E Thermally stable liquid viscosifiers • • EMULAM VIS Organoclay / Gelling agent for OBM • • 1-5
BP 85 Gel-E Thermally stable liquid viscosifiers • • EMULAM V PLUS High yield Organoclay / Gelling agent • • 1-5
DSC VIS Non-ionic pure hydroxyethyl cellulose • • 0.5-3 LAMGUM 200 High viscosity guar gum • • • • 0.2-4 Y Y
LIQUID GUAR E Liquid viscosifiers using ummodified guar • • 0.04 Y LAMPAC CHR High visc., premium grade, purified PAC • • • • 0.2-2 Y Y
LIQUID VIS Hydroxyethyl cellulose polymer • • 0.5-3 LAMPAC REGULAR High visc., purified PAC, according to API/ISO • • • • 0.2-2 Y Y
LIQUID VIS E Hydroxyethyl cellulose polymer • • 0.5-3 Y LAMPAC NFE-R Dispersible - Purified premium HV PAC • • • • .2-2 Y Y
QUICK VIS Enhances thermal stability of HEC • • 0.3-0.4 LAMBERTI USA
EXTENDER 75
EMULAM RM3 Rheology Modifier for Invert muds • • 0.5-3
DRILLING SPECIALTIES CO.
EMULAM RMD Rheology Modifier for Diesel muds • • 0.5-3
CLARIZAN High viscosity clarified biopolymer • • • • 0.25-2.0 E Y Y
EMULAM VIS Organoclay • • 1-10
BIOPOLYMER
EMULAM V-PLUS Organoclay • • 1-8
DRILLPAC HV High viscosity polyanionic cellulose • • • • 0.25-2.5 Y Y
POLYMER POLYFLOS G7F Guar Gum viscosifier • • • • 0.5-4
DRILLPAC LV Low viscosity polyanionic cellulose • • • • 0.25-2.5 Y Y LIQUID CASING
POLYMER WORKOVER Non-damaging polymers • • 2
DRILLZAN D Economical high viscosity biopolymer • • • • 0.25-2.0 Y Y WORKOVER 2000 Non-damaging polymers • • 2
BIOPOLYMER MAYCO WELLCHEM
DRISCAL D High temperature synthetic polymer • • • • 0.5-2.5 Y Y MAYCO HELP Polymer temperature extender • • • • 1-5
POLYMER MAYCO LIVIS Liquid viscosity agent • • • • 1-6
DRISPAC PLUS Dispersable HV polyanionic cellulose • • • • 0.25-2.5 Y Y MAYCO VIS EXTRA Viscosity control agent • • • • 1-3
REGULAR MESSINA
DRISPAC PLUS Dispersable LV polyanionic cellulose • • • • 0.25-2.5 Y Y
AQUA-VIS-36EX Mixed metal hydroxide • • 0.25-1.25
SUPERLO
BIOVIS Xanthan gum viscosifier • • • • 1 Y
DRISPAC REGULAR High viscosity polyanionic cellulose • • • • 0.25-2.5 Y Y
POLYMER BIOVIS-D Xanthan gum viscosifier • • • • 1 Y
DRISPAC SUPERLO Low Viscosity polyanionic cellulose • • • • 0.25-2.5 Y Y BIOVIS-HT HT viscosifier • • • • 1 Y
POLYMER BIOVIS-P Premium grade xantham gum • • • • 1
FLOWZAN High viscosity biopolymer • • • • 0.25-2.0 Y Y BORE-SWEEP Polymer sweep • • • • 0.1-0.2
BIOPOLYMER HOTGEL API grade sepiolite • • • • 5-30
GREENBASE Liquid High Viscosity cellulosic polymer • • • • 0.5-5.0 Y Y KLEEN-DRILL Viscosifier blend • • 6-8
DRISPAC POLYMER KLEEN-VIS Viscosifier/filtration control • • 1-3
GREENBASE Liquid High viscosity biopolymer • • • • 0.5-4.0 Y Y KLEEN-VIS-2 Polymeric viscosifier • • • 1-3
FLOWZAN POLYMER KLEEN-VIS-X Cellulose viscosifier • • • 1-3
GREENBASE HEC Liquid High Viscosity hydroxyethyl cellulose • • • • 0.5-5.0 Y Y MESUCO-BEN OCMA bentonite • • • • 20 Y
POLYMER MESUCO-GEL API bentonite • • • • 20 Y
HE-150 POLYMER High viscosity synthetic polymer • • • • 1.0-2.0 Y Y MESUCO-SALT-CLAY API Attapulgite clay • • • • 16 Y
LIQUID HE-150 High viscosity synthetic polymer • • • • 2.0-4.0 Y Y MESUCO-SUPER-GEL High-yield bentonite • • • • 10 Y
POLYMER MUDUP Organic viscosifier • • • • 1.5 Y
GREENBASE High viscosity synthetic polymer • • • • 3.0-6.0 Y Y MUDUP-PLUS Modified high purity polysaccharide • • • • 1.5 Y
HE-150 POLYMER OILVIS Oil gellant • 3 Y
LIQUID DRISPAC High viscosity polyanionic cellulose • • • • 0.5-4.0 Y N OILVIS-2 Oil gellant, self-activating • • 3-5
POLYMER
OILVIS-HT HT invert and oil-based viscosifier • • 3 Y
LIQUID FLOWZAN High viscosity biopolymer • • • • 0.5-4.0 Y N
OILVIS-HV Quick gelling viscosifier • • 2-10
BIOPOLYMER
OILVIS-PLUS Low-end rheology modifier • • 3 Y
LIQUID HEC High viscosity pure hydroxyethyl • • • • 0.5-5.0 Y N
POLYMER cellulosic polymer OILVIS-S Organophilic non-gelling clay viscosifier oil • • 2-8 Y
DRILLSAFE JANEL PUREGEL Untreated API bentonite • • • • 10 Y
REDI-COAT PHPA • • • .5 Y
BENTONITE OCMA bentonite • • • •
REDI-COAT-PLUS PHPA, concentrated • • • .5 Y
MULTIVIS A Cellulosic viscosifier • • • • 0.1-0.5
REDI-DRIL Multi-functional polymer • • 3 Y
MULTIVIS S Modified polysaccharide • • • • 0.05-0.1
VISPAC-R High viscosity PAC polymer • • • • 1 Y
SALT GEL Salt water drilling clay • • •
VISFLO-REGULAR High viscosity PAC polymer • • • • 1 Y
ECOFLUIDS
M-I SWACO
ECO OBGEL Orgnophylic clay • 2-10 ppb
ACTI-BUILD Polar activator for Eastern Hemisphere • •
ECO PBGEL Organophylic clay • • 2-10 ppb
DI-BALANCE Viscosifier for the DIPRO system • 0.25-2
ECOFLO Xanthan gum • • • • .25-1 ppb Y
DI-BOOST Secondary viscosifier for DIPRO system • .03-.06 gpb
ECOMOD Oil mud viscosifier • • 0.25-2 ppb
DRILPLEX Viscosifier for DRILPLEX system • • 1-3 Y
ECO-EX Bentonite Extender • • • • Y
DRILPLEX HT MMO viscosifier for high temperature • • 1-3 N N N
ECOVIS-HT Filtrate Reducer HTHP • • • • 2.0-6.0 Y
DRILPLEX LT MMO viscosifier for low temperature • • 1-3 N N N
ECOHEC High-Quality polymer • • • • 0.25 - 0.75
DUO-TEC Xanthan gum polymer • • • • 0.25-2 Y N
EMERY
DUO-TEC NS Xanthan gum polymer, non-dispersible • • • • 0.25-2 Y N Y
DEHYDRIL HT Synthetic silicate • 0.5-2.5 for North Sea use
TERRADRIL V 300 Rheology modifier • • 1-5 DUO-VIS Xanthan gum polymer • • • • 0.25-2 Y N Y
TERRADRIL V 1075 Low end rheology modifier • • 0.5-2 DUO-VIS L Liquified Xanthan gum, non-clarified • • • • 0.25-0.5 Y N
GUMPRO
DUO-VIS NS Xanthan gum, non-dispersible • • • • 0.25-2 Y N Y
GEL TEX CP Modified gum • • • • 2-5 for North Sea use

www.offshore-mag.com • September 2012  Offshore  63

 Plonor listing available

Plonor listing available

HOCNF classification

HOCNF classification
Passed LC50 test

Passed LC50 test

Synthetic fluid

Synthetic fluid
Saturated salt

usage (Ib/bbI)

Saturated salt

usage (Ib/bbI)
Nondispersed

Nondispersed
concentration

concentration
Fresh water

Fresh water
Dispersed

Dispersed
Oil-based

Oil-based
Normal

Normal
Product Product
name Description name Description
DUO-VIS PLUS Xanthan gum • • • • 0.25-2 Y N Y STRATA CONTROL SERVICES, INC.
DUO-VIS PLUS NS Xanthan gum, non-dispersible for North Sea use • • • • 0.25-2 Y N N STRATA SUPER Ground filament materials • • • • • • 0.3-0.6 Y
DUROGEL Sepiolite clay • • • • 5-35 N N Y SWEEP
FLO-TROL Starch derivative for FLOPRO NT systems • • • 2-4 Y Y Y SUN DRILLING PRODUCTS
FLO-VIS L Non-dispersible clarified Xanthan gum • 0.25-0.5 gpb SUNSWEEP Mechanical hole cleaning agent • • • • • • .1-.2 bls/bbl Y
FLO-VIS NT Non-dispersible, non-clarified Xanthan gum • • • 0.25-1.5 TBC-BRINADD
FLO-VIS PLUS Premium clarified Xanthan • • • • 0.75-2.25 N N FORMAVIS ULTRA Xanthan gum biopolymer 0.5-1.5
for FLOPRO NT systems GLYSOL SF 400M High molecular weight polyethylene glycol • • •
GELEX Polymer bentonite extender • • 0.05-0.2 N N Y AO-ACTIVATOR Viscosity Enhancer
GELPLEX Viscosifier for the DRILPLEX system • 7-10 AO-EPC Viscosifier
HIBTROL HV Fluid loss additive and secondary shale inhibitor • • • 1.4-7 GLYSOL-DRIL Xanthan gum biopolymer and CaCO3
HRP Liquid viscosifier & gelling agent for oil muds • 1-6 N N THIXSAL-ULTRA Bioploymer and derivatized starch blend • • • 4
ISOACT Viscosifier for ISOTHERM Insulating Packer Fluid • 5 VIS ULTRA Xanthan gum biopolymer 0.5-1.5
ISOLOK Viscosifier for ISOTHERM Insulating Packer Fluid • 0.25 - 1.0% VIS ULTRA L Liquid Xanthan gum biopolymer • • •
ISOVIS Viscosifier for ISOTHERM Insulating Packer Fluid • 0.25 - 1.0% TETRA TECHNOLOGIES, INC.
M-I GEL Premium grade treated Wyoming bentonite • • • • 5-35 Y Y
ACTIVIS Liquid viscosifier • •
M-I GEL SUPREME Non-treated bentonite, API spec • • • • 5-35 N N Y
ATAPULGITE Saltwater gel • •
M-I GEL SUPREME Non-treated API Wyoming bentonite • • • • 5-35 N N Y
BENTONITE Freshwater gel • •
WYOMING
BIOPOL Dry viscosifier • • • • Y
M-I GEL WYOMING API-spec bentonite Wyoming source only • • • • 5-35 N N
BIOPOL HT Dry viscosifier • • • • Y
M-I PAC R Pure PAC polymer, regular grade • • • 2-5 Y Y
BIOPOL L Liquid viscosifier • • • • Y
NOVAMOD Low-shear rate viscosifier • 1-5 N N Y
PAYZONE 750 Temperature stabilizer • •
NOVATEC M Low-end rheology modifier • 1-3 N N
PAYZONE HPS High performance starch • • • • Y
POLYPAC R Polyanionic cellulose • • • • 0.5-2 Y Y Y
PSEUDOPOL Synthetic polymer • • •
POLYPAC SUPREME R Polyanionic cellulose, premium grade • • • • 0.5-2 Y N
PSEUDOPOL D Synthetic polymer • •
POLY-SAL Non-fermenting starch • • • • 2-6 N N Y
PSEUDOPOL HT Dry viscosifier • •
POLY-SAL HT High-quality, preserved polysaccharide • • • • 2-6
PSEUDOPOL HT Hi prof liquid viscosifier • •
POLY-SAL T Non-fermenting tapioca starch derivitive • • • • 2-6 N N
LIQUID
POWER VIS V that creates less pump pressure •
TDSP I <12 LB/GAL Viscosified weighted spacer • • • • • •
& thermal convection
TDSP I <15 LB/GAL Viscosified weighted spacer • • • • • •
POWER VIS L Liquid version of POWER VIS viscosifier • .125-.5 gal/bbl
TDSP I <19 LB/GAL Viscosified weighted spacer • • • • • •
RHEBUILD Viscosifier for RHELIANT system • 0.25-0.5
TDSP III - 11.6 CACL2 Viscosified sweep • • • • • •
RHEFLAT Rheology modifier for the RHELIANT system • 0.5-3
TDSP III - Viscosified sweep • • • • • •
RHETHIK Rheology modifier for the RHELIANT system • 0.25-1
FRESHWATER
SAFETHERM-VIS L Viscosifier in SAFETHERM system •
TDSP III - SALTWATER Viscosified sweep • • • • • •
SAFE-VIS HEC • • • • 0.5-4 Y N
TETRA HELP Temperature extender - • •
SAFE-VIS E Liquid HEC • 5-10 Y N basic amine-glycol mixture
SAFE-VIS HDE Liquid HEC for high-density brines • • • 14-29 N N TETRAFLEX 110 Cross linked gelled polymer • • • •
SAFE-VIS LE Liquid viscosifier for brines • 0.6-1.2 gpb POLYMER
SAFE-VIS OGS Specially formulated liquid HEC • .6-1.2 gpb TETRAFLEX 135 Cross linked gelled polymer • • • •
SALT GEL Attapulgite clay • • • • 5-35 Y Y Y POLYMER
SUPRAVIS Viscosifier for the ULTRADRIL system • • 0.25-2 TETRAVIS Dry HEC polymer • • • • Y
SUREMOD Viscosifier for SBM systems • 1-4 N N Y TETRAVIS EXTENDER Temperature stabilizer • •
SURETHIK Rheological modifier • 0.25-1 N N TETRAVIS L Liquid HEC polymer • • • • Y
TARVIS L Liquid viscosifier for the SAGDril system • 0.25-.5 gpb N N TETRAVIS L PLUS Double strength liquid HEC viscosifier • • • •
TRUVIS Primary viscosifier for TRUDRIL systems • 0-8 N N TURBO-CHEM INTERNATIONAL
UNIPAC SUPREME R Dispersible, high-viscosity PAC • • • • 0.25-1 SWELLCM Gelled, swelling, sealing agent • • • • • • Y
VERSAGEL HT Hectorite • 0-8 Y N WEATHERFORD INTERNATIONAL LTD.
VERSAMOD Oil mud gelling agent and viscosifier • 1-3 N N
HGA-37 Hydrocarbon base gelling agent • 0.5-1.0%
VERSAMUL Primary emulsifier and wetting agent • 2-10 N N
HGA-44 Cross-linker for HGA-37 and HGA-715 • 0.5-1.0%
VERSAPAC Thermally activated organic thixotrope • • 5-30 N N
HGA-48 Cross-linker for HGA-37, 70, 702 • 0.5-1.0%
VG-69 Organophilic clay • • 2-10 N N Y
HGA-61 Delayed cross-linker for HGA-70, 71, 702 • 0.5-1.0%
VG-PLUS Improved organophilic clay • • 2-10 Y N
HGA-65 Cross-linker for HGA-70, -71, -702 • 0.3-1.0%
VG-SUPREME Organophilic clay for the NOVA systems • 2-10
HGA-70 Hydrocarbon base gelling agent, HT • 0.3-1.0%
NEWPARK DRILLING FLUIDS HGA-71 Hydrocarbon base gelling agent, HT • 0.5-1.0%
CYBERVIS Organo-bentonite • • 2-4 HGA-702 Hydrocarbon base gelling agent, HT • 0.3-1.0%
CYBERVIS DW Polymeric rheological modifyier • • 0.25-2.5 HGA-715 Hydrocarbon base gelling agent • 0.5-1.0%
CYBERVIS HT Organo-hectorite • • 4-8 HGA-S61 Cross-linker for HGA-70, 71, 702 • 0.5-1.0%
CYBERVIS RM Polymeric rheological modifyier • • <4 POLYMER K Water-soluble drilling polymer • 1.5-3 lbs/bbl
DEEPVIS Sepiolite • • • WGA-1 Water gelling agent • • 1-8 Y
EVOMOD HPHT synthetic low-end rheology mod. • • • 0.1-2.0 WGA-2 Water gelling agent • • 1-8 Y
EVOVIS HPHT polymeric rheology modifier • • 0.25-6.0
INTERVENTION FLUIDS
NEWGEL Montmorillonite • • • • 5-30
NEWGEL NT Untreated montmorillonite • • • • 5-30 M-I SWACO
NEWPHPA PHPA • • • • 0.2-2 FLODENSE AP High density displacing fluid for casing • Y
NEWPHPA D PHPA • • • • 0.25-1 pressure remediation
NEWZAN Biopolymer • • • • FLOPRO CT Coiled tubing drilling / intervention fluid • • • 8.5-9.5 Y
NEWZAN L Biopolymer • • • • L O S S C I R C U L AT I O N , S E A L I N G M AT E R I A L S
OPTIVIS Organo-bentonite • • 1-6 ASAP FLUIDS
OPTIVIS HT Organo-hectorite • • 1-6 ASAP LC SEAL Micronised cell fibre • • • • 5-9
OPTIVIS RM Polymeric rheological modifyier • <4 ASAP LC SEAL T Treated fibres for peventing mud loss • • 5-9
NOV FluidControl ASAP MICROSEAL Blend of Fibers and Flakes • • • •
NOV TROL Viscosifier - liquid • • • • 0.25-4 Y ASAP CHIPS Marble Chips • • • • • • 30
AMZINC VIS I Liquid viscosifier • 3% ASAP MICA Muscovite Mica • • • • • • 20
AMZINC VIS II Liquid viscosifier • 3 ASAP K SEAL Blend of Fibers, Granuls and Flakes • • • • • • 20
AMZINC VIS III Liquid viscosifier • 3 SUREPILL Non Damaging Polymeric Plug • • • • 15-20
ECOGEL H Organophilic hectorite viscosifier • • 4-10 Y THERMOGEL Non Damaging Polymeric Plug • • • • 12-15
ECOGEL M Organophilic clay • • 4-10 ASAP NUT PLUG Wallnut shells • • • • • • 5-15
NOV GEL Bentonite • • • • 6-35 ASAP SEAL M High Loss Plug • • • • 50-70
NOV GEL NT Bentonite, non-treated • • • • 6-35 Y ASAP SORB Polymeric Plug • • • • 2-6
SALT GEL Attapulgite • • • • 6-35 Y BAKER HUGHES DRILLING FLUIDS
NOV XAN Xanthan gum • • • • 0.25-4 Y BAKER-SQUEEZ Single sack lost circulation solution • • • • varies E Y Y
NOV XAN D Xanthan gum • • • • 0.25-4 Y BJ SEAL F, M & C Sized calcium carbonate • • • • 5-50
PRIME ECO GROUP INC. CARBO-SEAL Modified hydrocarbon LCM for sealing • • varies Y
BIOGUM Xanthan gum • • • • CHEK-LOSS Complex cellulosic LCM • • • • 4-8+ ppb Y
VISCLAY-R Bentonite extender for high • • • • 0.75-1.25 Y CHEK-LOSS COARSE Coarse, complexed cellulosic • • • • • • 4-8+ ppb Y
& normal applications for loss of circulation
PT. INDOBENT WIJAYA MINERAL CHEK-LOSS PLUS High-lignin cellulosic LCM particularly for • • 4-8+ ppb Y
INDOBENT Bentonite (API 13A) • • 15-25 Y OBM/NAF with less adverse effect on PV and ES
QUARON N.V. ECCO-FIBER Fine Environmentally friendly cellulosic LCM • • • • as needed
MC FVIS Viscosifier for bentonite free systems • • • • 3-6 ECCO-FIBER Medium Environmentally friendly cellulosic LCM • • • • as needed
ECCO-SHELL SERIES Environmentally friendly LCM • • • • as needed

64  Offshore  September 2012 • www.offshore-mag.com

 Plonor listing available

Plonor listing available

HOCNF classification

HOCNF classification
Passed LC50 test

Passed LC50 test

Synthetic fluid

Synthetic fluid
Saturated salt

usage (Ib/bbI)

Saturated salt

usage (Ib/bbI)
Nondispersed

Nondispersed
concentration

concentration
Fresh water

Fresh water
Dispersed

Dispersed
Oil-based

Oil-based
Normal

Normal
Product Product
name Description name Description
FLO-GUARD-L Drilling fluid and cement LCM system • • E Y GUMPRO
FLO-GUARD-LC Drilling fluid and cement LCM system • • GEL LC SEAL Micronised cell fibre • • • • 5-9
FLOW-CARB SERIES Multiple grind size series of calcium carbonate • • • • varies GEL LC SEAL T Treated Fibers for preventing mud Loss • • 5-9
LC-LUBE Sized, synthetic graphite • • • • • • 2-8 ppb Y GEL MICROSEAL Blend of Fibres and Flakes • • • • 20-40
LC-LUBE FINE Sized, synthetic graphite • • • • • • 2-8 ppb Y GEL CHIPS Marble Chips • • • • • • 30
LC-SHEILD Sized, calcined petroleum coke • • • • • • 6-20 ppb GEL MICA Muscovite Mica • • • • • • 20
LC-SHEILD FINE Sized, calcined petroleum coke • • • • • • 6-20 ppb GEL K SEAL Blend of Fibers, Granuls and Flakes • • • • • • 20
MAGNA-PLUS Acid soluble bridging material • • • As needed E Y SUREPILL Non Damaging Polymeric Plug • • • • 15-20
MIL-CARB SERIES Sized ground calcium carbonate • • • • • • 1-50 ppb Y THERMOGEL Non Damaging Polymeric Plug • • • • 12-15
MIL-CEDAR FIBER Shredded cedar bark • • • • 5-10 ppb Y GEL NUT PLUG Wallnut shells • • • • • • 5-15
MILFLAKE Shredded cellophane • • • • varies GEL SEAL M High Loss Plug • • • • 50-70
MILMICA Muscovite mica • • • • • • 5-10 ppb Y GEL SORB Polymeric Plug • • • • 2-6
MIL-PLUG Ground nut shells • • • • • • 5-10 ppb Y IMPACT FLUID SOLUTIONS
MIL-SEAL Blended LCM product available in 3 grind sizes • • • • 5-10 ppb Y FLC2000 Seepage loss control/induced losses • • • • • • 3.0-8.0 Y Y Y
POLY-FX Polymeric LCM low density brines • • • • • StAR FLH Seepage loss control/induced losses • • 3.0-6.0 Y Y
SOLUFLAKE D Flaked calcium carbonate for drilling • • • • • • 2-8 ppb Y StAR SEAL 35 Lost circulation for high perm • • • • • • 35 - 45 Y Y
SOLUFLAKE Flaked calcium carbonate • • • • • • 2-8 ppb Y LCP2000 Lost circulation pill for severe/total losses • • • • • • 45-75 Y Y Y
SF, F, M, C, D StAR SAND SEAL Lost circulation for seepage/moderate losses • • • • • • 5 - 25 Y Y Y
SOLU-SQUEEZE Acid-soluble LCM • • • • • • varies (Fine/Coarse)
TEKPLUG XL Cross linked polymer (no zinc) • Gold Y StAR THERMOSET All purpose lost circulation • • • • • • 5 - 15 Y Y Y
TEKPLUG XL HD Cross linked polymer high density • (Fine/Medium)
THERMO-PLUG I Crosslinked LCM system • KELCO OIL FIELD GROUP
THERMO-PLUG II Crosslinked LCM system • KWIK-SEAL Blended LCM- fine, medium, coarse • • • • 20-30
W.O. 30 Sized, ground calcium carbonate • • • • • • 5-40 ppb Y KEMTRON TECHNOLOGIES
(Multiple grind sizes available)
POLY SEAL 500 Proprietary polymer • • • •
X-LINK Cross-linked polymer system • • • • • •
LIQUID CASING
XL STABILIZER pH control additive •
LIQUID CASING Polycrystalline • • • • • • 8 Y
BAROID FLUID SERVICES
LIQUID CASING II Polycrystalline • • • • • • 6 Y
BARACARB 5, 25, 50, Sized acid-soluble marble • • • • • • 5-60 Y Y Y
O-M SEAL Polycrystalline • • • • • • 50 Y
150, 400, 600, 1200
WORKOVER 3000 Non-damaging polymers • • 2 Y
BARACARB DF 5, Sized acid-soluble marble • • • • • • 5-60 Y Y Y
25, 50, 150, 600 M&D INDUSTRIES OF LOUISIANA
BARAFLAKE M, L Flaked calcium carbonate • • • • • • 5-20 Y Y Y DRILL XPRESS Liquid Viscosifier for WB Fluids • • • • Situational Y
BARA-PERFLUID Blend specially for use in perforating • • • • • • As needed LIQUID BRIDGE PLUG Resin Based LCM Plug • • • • • • Situational
BARAPLUG Sized salt • • 5-60 Y Y Y POLY PLUG Cross link polymer de-watering slurry • • • • • • Situational
20, 50, 6/300 ULTRA SQUEEZE
BARARESIN Sized oil soluble bridging agent-F, M, C • • 5-20 Y ULTRA SEAL-C Coarse cellulosic fiber blend • • • • • • 15-25 Y
BAROFIBRE Seepage-loss additive, regular & coarse • • • • • • 5-50 Y Y Y ULTRA SEAL-PLUS Massive loss fiber LCM • • • • • • 25-40 Y
BAROFIBRE Seepage-loss additive, fine • • • • • • 5-50 Y Y Y ULTRA SEAL-POLY Fibers and crosslink polymer • • • • • • Situational Y
SUPERFINE PLUG
BAROFIBRE O Oil wet Seepage-loss additive • • • • • • 5-50 ULTRA SEAL-TG Tech grade cellulosic fibers • • • • • • 7-9 Y
BARO-SEAL Classic Sized LCM blend • • • • 5-50 Y Y ULTRA SEAL-XLA Cross link polymer temp. accelerator • • • • • • Situational
BARO-SEAL Coarse Sized LCM blend • • • • 5-50 Y Y ULTRA SEAL-XLD Cross link mixing enhancer • • • • • • Situational
BARO-SEAL Fine Sized LCM blend • • • • 5-50 Y Y ULTRA SEAL-XLR Cross link polymer temp. retarder • • • • • • Situational Y
BARO-SEAL Medium Sized LCM blend • • • • 5-50 Y Y ULTRA SEAL-XP Cellulosic fiber blend • • • • • • 5-7 Y
DUO-SQUEEZE Dual size blend for high loss zones • • • • • • 40-100 ULTRA SPACER High fluid loss mud spacer • • • • • • Hole dicates Y
H, R, SA ULTRA SEAL Solids free cross link polymer • • • • • • Y
EZ-PLUG Acid soluble LCM Blend • • • • • • 5-90 Y CLEAR GEL
FUSE-IT Synthetic polymer-based blend • • • • • • Pill form Y MAYCO WELLCHEM
HYDRO-PLUG Hydratable polymeric blended material • • • • • • Pill form Y MAYCO MAD SEAL Lost circulation material • • • • • • 5-25
HYDRO-PLUG NS Hydratable polymeric blended material • • • • • • Pill form Y Y Y MAYCO SEAL Lost circulation, sealing material • • • • • • 10-50
N-PLEX Activator for N-SQUEEZE • • • • • • As needed Y Y MAYCO SEAL COARSE Lost circulation, sealing material • • • • • • 10-50
N-SEAL Inorganic LCM • • • • • • As needed Y MAYCO SEAL MEDIUM Lost circulation, sealing material • • • • • • 10-50
N-SQUEEZE Lost circulation material • • • • • • As needed Y Y MAYCO SLURRY Lost circulation spotting fluid • • • • 50
PLUG-GIT Processed cedar fiber • • • • • • 3-10 Y Y Y MESSINA
PLUG-GIT H Processed hardwood fiber • • • • • • 3-10 Y Y Y DIAPLUG Loss circulation squeeze • • • • 15
STOP-FRAC D Pelletized blend of LCM • • • • • • 10-15 Y GB-SEAL Loss circulation squeeze • • • • 35
STOP-FRAC S Pelletized blend of coarse LCM • • • • • • 50-70 Pill HOLE-SEAL-II Seepage control multi-purpose LCM • • • • 10-40
STEELSEAL 50, Dual composition carbon compound • • • • • • 5.0-30 Y Y Y HOLE-SEAL-OB OBM LCM • • 10-40
100, 400, 1000 KLEEN-BLOCK Acid soluble LCM • • 20-40
WALL-NUT Ground walnut shells – F, M, C • • • • • • 10-40 Y Y Y KLEEN-BLOCK-FL Flaked calcium carbonate • • • • • • 1-3
BOYSENBLUE/CELTEC INTERNATIONAL KLEEN-BLOCK-X Sized carbonate LCM • • • • 10-40
BLEN FYBER Cellulose fiber • • • • • • 6 Y KLEEN-PIL Acid soluble LCM • • 10-40
BLEN PLUG Cellulose coarse fiber • • • 30 MEGA-SEAL/ Cross linked polymer plug system • • • •
BLEN SEAL Cellulose fiber • • • • • • 6 Y MEGA-LINK
BLEN SQUEEZE Cellulose LCM w/crosslinkable polymer • • • • • • 30 Y MESUCO-FIBER Cellulose fiber LCM • • • • • • 10-40 Y
FRAC PAK High solids, high fluid loss • • • • • • 80-120 Y MESUCO-FLAKE Cellophane flakes LCM • • • • • • 10-40 Y
DRILLING SPECIALTIES CO. MESUCO-MICA Ground mica LCM • • • • • • 10-40 Y
DIASEAL M LCM Sized diatomaceous earth blend • • • • • • 17-50 Y Y MESUCO-PLUG Ground nut shells LCM • • • • • • 10-40 Y
DYNARED FINE Ground cellulosic fiber for seepage control • • • • • • 2.0-10.0 Y Y MESUCO-SEAL Blend of LCM • • • • • • 10-40 Y
DYNARED MEDIUM Ground cellulosic fiber for seepage control • • • • • • 2.0-10.0 Y Y MICRO-SEAL Liquid hydrocarbon compound • • • 2 Y
DYNARED COURSE Ground cellulosic fiber for seepage control • • • • • • 2.0-10.0 Y Y MICRO-SEAL II Filtration control/LCM for depleted • • • • 3-8
DYNA-SEAL FINE Cellulosic fiber for seepage loss in oil muds • • • • • • 2.0-10.0 Y Y sand formations
DYNA-SEAL MEDIUM Cellulosic fiber for seepage loss in oil muds • • • • • • 2.0-10.0 Y Y OILSEAL Oilmud LCM • • 8
TORQUE-SEAL LPM/LCM for casing and horizontal drilling • • • • • • 2.0-30.0 Y Y POLYPLUG Reversible crosslinked polymer plug • • • • 1-5
LPM/LCM POLY-SEAL Gel LCM and water control • • 40
SURE-SEAL LPM LPM for Wellbore Strengthing • • • • • • 30.0-50.0 Y Y POLY-SEAL-HT Gel LCM and water control • • 40
WELL-SEAL LCM FINE Blended LCM for Lost Circulation • • • • • • 2.0-40 Y Y SUPER-STOP Loss circulation material • • • • 25 Y
WELL-SEAL LCM Blended LCM for Lost Circulation • • • • • • 10-40 Y Y SUPER-STOP-AS Acid-soluble loss circulation material • • • • 40
MEDIUM M-I SWACO
WELL-SEAL LCM Blended LCM for Lost Circulation • • • • • • 10-50 Y Y C-SEAL Coke FLCA • • • • • • 15-20 N N
COARSE C-SEAL F Coke FLCA - fine grind • • • • • • 15-20 N N
REBOUND LCM Carbon-based LCM for fractures • • • • • • 15-25.0 Y Y CLEANPERF Fluid-loss system for perforating operations • • Y
DRILLSAFE JANEL FORM-A-BLOK High-performance, high-strength blend • • • • • • 20-40
DS-CHIP Flakey acid-soluble LCM, all grades • • • • • FORM-A-PLUG II Pumpable lost circulation plug • • • • • • 100%
MULTIPLAST Non-pollution high soluble low solids LCM • • • • FORM-A-PLUG ACC Accelerator for FORM-A-PLUG pill • • • • • • 3.5-10.5
ECOFLUIDS FORM-A-PLUG RET Retarder for FORM-A-PLUG pill • • • • • • 3.5-17.5
ECOFIBER Micronized SLA 2-25 Y FORM-A-SET Polymeric lost circulation material • • • • • • 25-50 Y N
MUD SAVE Thermoset rubber SLA 2-25 Y FORM-A-SET ACC Accelerator for FORM-A-SET pill • • • • • • 1-5 N N
STRATASEAL Specialty LCM • • • • • • 3-80 Y FORM-A-SET AK Polymeric LCM • • • • • • 25 N N
STRATAPLUG Specialty LCM • • • • • • 10-50 Y FORM-A-SET AKX Variant of FORM-A-SET AK pill for water shutoff • • • • • • 11-17.5 N N
FORM-A-SET RET Retarder for FORM-A-SET pill • • • • • • 0-20 N N
FORM-A-SET XL Crosslinker for FORM-A-SET pill • • • • • • 1-2 N N

www.offshore-mag.com • September 2012  Offshore  65

 Plonor listing available

Plonor listing available

HOCNF classification

HOCNF classification
Passed LC50 test

Passed LC50 test

Synthetic fluid

Synthetic fluid
Saturated salt

usage (Ib/bbI)

Saturated salt

usage (Ib/bbI)
Nondispersed

Nondispersed
concentration

concentration
Fresh water

Fresh water
Dispersed

Dispersed
Oil-based

Oil-based
Normal

Normal
Product Product
name Description name Description
FORM-A-SQUEEZE High-solids, high-fluid loss plug • • • • • • 80 HYSAL SUPERFINE Polymer and sized salt blend for high density brines • • 100
G-SEAL Coarse-sized graphite • • • • • • 15-20 Y Y OSS PILL Polymer and oil soluble resin blend • • • 30
G-SEAL FINE Fine-sized graphite • • • • • • 15-20 PBS PLUG 2000 Polymer and inorganic salt blend 100
G-SEAL HRG High-resiliency graphite • • • • • • 5-10 PBS PLUG 500 Polymer and inorganic salt blend 100
G-SEAL HRG FINE High-resiliency graphite • • • • • • 5-10 PBS PLUG ACTIVATOR Inorganic salt blend • • • • 50 ppb Y Y
G-SEAL PLUS Coarse-sized plugging agent • • • • • • 15-20 PBS PLUG RETARDER Inorganic salt blend 6
G-SEAL PLUS C Blend for lost circulation and wellbore • • • • • • 15-20 PLUG-SAL Sized sodium chloride • • 50
strengthening PLUG-SAL X Sized sodium chloride • • 50
LO-WATE Sized ground limestone • • • • • • 10-40 N Y PLUG-SAL XC Sized sodium chloride • • 50
M-I CEDAR FIBER Shredded cedar bark fiber • • • • 5-30 Y N SANHEAL PILL Polymer/carbonate blend 50
M-I SEAL LCM for fractured or vugular formations • • • • • • 5-20 N N SLUGGIT Coarse calcium carbonate • • • • 50
M-I-X II Ground cellulosic fibers • • • • • • 5-20 Y Y SLUGGIT CM Coarse calcium carbonate • • • • 50
M-I 198 Coarse-ground high-temp Gilsonite • SLUGGIT PLUS Coarse calcium carbonate • • • • 50
NUT PLUG Ground nut shells • • • • • • 5-50 Y Y Y SOLUBRIGE Oil-solube bridging agent
OPTISEAL I Loss prevention material • • • • • • 30-70 SOLUBRIGE COARSE Sized oil soluble resin • • • • 50
OPTISEAL II Loss prevention material • • • • • • 30-70 SOLUBRIGE FINE Sized oil soluble resin • • • • 25
OPTISEAL III Loss prevention material • • • • • • 30-70 SOLUBRIGE MID Sized oil soluble resin • • • • 25
OPTISEAL IV Loss prevention material • • • • • • 30-70 SOLUVIS Oil-solube polymer and organic salt blend
RESEAL Highly compressive graphite • • • • • • ULTRA BREAKE M Magnesium Peroxide • • • 0.5 ppb
SAFE-CARB Sized ground marble • • • • • • 10-50 Y N TETRA TECHNOLOGIES, INC.
SAFE-LINK Cross linked polymer (no zinc) • 32pails/10bbl N N PAYZONE 530 Med grind, acid soluble fiber • • • • Y
SAFE-LINK 110 Cross linked polymer (no zinc) • 32pails/10bbl N N PAYZONE 532 Fine grind, acid soluble fiber • • • • Y
SAFE-LINK 140 Cross linked polymer high density • 32pails/10bbl N N PAYZONE CARB PRIME Broad PSD - fine grind CaCO3 • • • • • Y
SEAL-N-PEEL Removable loss control pill • • 100% PAYZONE CARB ULTRA Ultra fine grind, CaCO3 • • • • • Y
THRUCARB Organophilic bridging agent for FLOTHRU system • • 5.0 - 12.0 PAYZONE FLC Premixed gelled polymer pill • •
VERSAPAC Thermally activated organic thixotrope • • 5-30 N N FLEXSEAL
VERSATROL Naturally occurring asphalt • 2-8 Y Y PAYZONE FLC SLURRY Severe lost circulation pill • •
VINSEAL Filtration control additive particularly • • • • • • 2-5 PAYZONE FLC Calcium carbonate pill • •
effective in depleted zones SMARTSEAL
NEWPARK DRILLING FLUIDS PAYZONE FLC-CC Calcium carbonate pill • •
60/40 BLEND Blended LCM • • • • • • PAYZONE FLC-SS Sodium chloride pill •
CYBERSEAL Fiberous seepage control agent • • 10-35 PAYZONE HPS High performance starch • • • • Y
DYNAFIBER Micronized cellulose • • • • • • PAYZONE SS PRIME Broad PSD - fine grind NaCl • • • Y
DYNAPLUG Fibers, polymer & crosslink • • • • • • 50-100 PAYZONE SS ULTRA Ultra fine grind, NaCl • • • Y
NEWBRIDGE Sweep / bridging material • • • • • • 2-15 TETRA FLEX 110 Cross Linked Gelled polymer • •
NEWCARB Sized calcium carbonate • • • • • • TETRA FLEX 135 Cross Linked Gelled polymer • •
NEWCARB ULTIMIX Coarse calcite / marble • • • • • • TETRA SS COARSE Size controlled, coarse NaCl • • • Y
NEWPLUG Nut shell • • • • • • TETRA SS FINE Select grind, fine grind NaCl • • • Y
NEWSEAL Sized carbonaceous seepage agent • • • • • • 5-15 TETRA SS MEDIUM Size controlled, med size NaCl • • • Y
NEW X-PRIMA One-sack, high-solids squeeze • • • • • • TETRACARB COARSE Size controlled, coarse CaCO3 • • • • • • Y
NOV FluidControl TETRACARB FINE Select grind, fine CaCO3 • • • • • • Y
NOV TROL Viscosifier liquid • • 0.25-4 TETRACARB FLAKE Sized calcium carbonate
AMVIS Viscosifier • • 0.25-4 TETRACARB MEDIUM Size controlled, medium CaCO3 • • • • • • Y
dry powder TETRA Med grind, acid soluble fiber • • • • Y
KWIK SEAL Granules, flakes, fibers • • • • 25 Y MAGMAFIBER REG
MAGMA FIBER Lost circulation material • • 5-25 TETRA Fine grind, acid soluble fiber • • • • Y
MICA Mica • • • • 25 Y MAGMAFIBER FINE
NOV CARB C Calcium carbonate • • TURBO-CHEM INTERNATIONAL
NOV CARB F Calcium carbonate • • E Z SQUEEZE High solids, high fluid loss squeeze material • • • • • • 32-100 ppb Y
NOV CARB M Calcium carbonate • • • • 30 Y PREMIUM SEAL Micronized cellulose fiber • • • • • • 4 Y
NOV FIBER Ground plant fibers • • • • 4 Y SWELLCM Gelled, swelling, sealing agent • • • • • • 10 ppb Y
NOV PLUG Nutshells • • • • 10-30 SYN SEAL Seepage loss additive for synthetic & base mud • • 10-50 ppb Y
NOV PLUG X Sized Organic Blend • • • • 20 Y TURBO-PHALT Gilsonite/resin • • • • 4 Y
STARPLUG Crosslink polymer blend • • • • • • Pill Form VENTURE CHEMICALS
STARSQUEEZE Crosslink polymer blend • • • • • • Pill Form DELTA P Polysaccharide complex • • • • 2-8 Y
SURESEAL Graded carbon compound • • • • • • VEN-FYBER 201 Micronized surface modified cellulose fiber • • • • • 6-10 Y
PRIME ECO GROUP INC. VEN-PAK Blend of organic fibers • • • • • 3-20
PERFOREX-XP Propietary HTHP for OBM • • • • 0.2-8 Y VEN-PLEX I Crosslinking agent for VEN-PLUG • 0.2 gal/bbl
QUICK SLIP Graphitic plumbago/PDMS • • • • • • 4-6 ppb Y VEN-PLUG Fiber/polymer LCM • 40
TRUE SEAL Filtration control additive for depleted zones • • • • • • 4-6 ppb Y SHALE CONTROL
QUARON N.V. AKZO NOBEL
MC BEX Bentonite extender • • GABROIL PAC HIVIS PAC high viscosity technical (improved) • • • • 0.5-3 Y
MC LLC Liquid lost circulation plug • • • • • GABROIL PAC LOVIS PAC low viscosity technical (improved) • • • • 0.5-3 Y
MC SUPERSEALER LCM mixture • • • • GABROIL HV PAC high viscosity technical • • • • 0.5-3 Y
SETAC GABROIL LV PAC low viscosity technical • • • • 0.5-3 Y
XP-911 Multi sized insoluble carbon • • • • • • 6-50 Y STAFLO EXLO PAC low viscosity pure • • • • 0.5-2 Y
SPECIAL PRODUCTS STAFLO REGULAR PAC high viscosity pure • • • • 0.5-2 Y
SPECIAL PLUG Fluid loss control AMERICAN GILSONITE
SPECIAL SEAL Acid soluble fluid loss control BORE-PLATE Shale control agent for water-based fluids • • • 6 Y
STRATA CONTROL SERVICES, INC. AQUALON
FRAC-ATTACK Package high filtration squeeze pill • • • • • • 80 Y AQUAFLO LV High viscosity Standard Polyanionic cellulose • • • • 0.25-2 Y Y
STRATA-FLEX FINE Resilient elastomeric sealant materials • • • • • • 2-6+ Y AQUAFLO HV Low viscosity Standard Polyanionic cellulose • • • • 0.25-2 Y Y
STRATA-FLEX MEDIUM Resilient elastomeric sealant materials • • • • • • 2-20+ Y AQUAPAC LIQUID Environmental friendly anhydrous • • • • 0.50-4 D Y Y
STRATA-LCM MEDIUM Medium grade blended cellulose fiber • • • • • • 2-20+ Y AquaPAC suspension
STRATA-SCM FINE Fine grade blended cellulose fiber • • • • • • 2-6+ Y AQUAPAC LV Low viscosity Premium Polyanionic cellulose • • • • 0.25-2 Y Y
STRATA-VANGUARD Package LCM pill mixed in mud • • • • • • 50-100 Y AQUAPAC REGULAR High viscosity Premium Polyanionic cellulose • • • • 0.25-2 Y Y
SUN DRILLING PRODUCTS AQUAPAC ULV Ultra Low viscosity Premium Polyanionic cellulose • • • • 0.25-2 Y Y
SX-PLUS Carbon seepage loss agent • • • • 3-6 lbs/bbl Y ASAP FLUIDS
TBC-BRINADD ASAP ASPHATEX Sulphonated Asphalt • • • • • • 2-10 •
BRIDGECARB-ULTRA Polymer and sized calcium carbonate blend • • • 50 Y ASAP COL M Medium Cloud Point Temperature Glycol • • • 10-20
BRIDGECARB-ULTRA F Polymer and sized calcium carbonate blend • • • 50 Y ASAP COL H High Cloud Point Temperature Glycol • • • 10-20
BRIDGESAL-ULTRA Polymer and sized salt blend • • 50 Y ASAP CPG 1 Polyglycol based Inhibitors • • • 10-20
BRIDGESAL-ULTRA SF Polymer and sized salt blend • • 50 Y ASAP CPG 2 Polyglycol based Inhibitors • • • 10-20 •
CARBWATE ULTRA Sized calcium carbonate • • • 10-50 ASAP PA Polyamine Base Shale inhibitor • • • • 6-10 •
CARBWATE ULTRA F Sized calcium carbonate 15-30 ASAP PHPA Partially Hydrolysed Polyacrylamide • • • • 0.1-1.5 •
HYSAL ACTIVATOR Catalyst for polymer hydration • • • 0.5 gal/bbl ASAP PHPA L Partially Hydrolysed Polyacrylamide liquid • • • • 1.5-4.5
HYSAL C Blend of polymers, buffers and CaCO3 • • 100 BAKER HUGHES DRILLING FLUIDS
HYSAL HD Polymer and sized salt blend • • 100 AQUA-COL Glycol used to control sensitive shales, • • • 3% Y
for high density brines increase lubricity and lower HT-HP filtrate
HYSAL HT Blend of polymers, buffers and sodium in freshwater and saltwater systems
chloride for high temperatures and densities

66  Offshore  September 2012 • www.offshore-mag.com

 Plonor listing available

Plonor listing available

HOCNF classification

HOCNF classification
Passed LC50 test

Passed LC50 test

Synthetic fluid

Synthetic fluid
Saturated salt

usage (Ib/bbI)

Saturated salt

usage (Ib/bbI)
Nondispersed

Nondispersed
concentration

concentration
Fresh water

Fresh water
Dispersed

Dispersed
Oil-based

Oil-based
Normal

Normal
Product Product
name Description name Description
AQUA-COL B Cloud-point glycol for shale control • • 3-5% Y POTASSIUM Potassium sulfonated asphalt • • • • • • 2.0-6.0 Y Y
in medium-salinity systems SOLTEX ADDITIVE
AQUA-COL D Glycol used to control sensitive shales, • • 3% Y SOLTEX ADDITIVE Sulfonated asphalt • • • • • • 2.0-6.0 Y Y
increase lubricity and lower HT-HP filtrate DRILLSAFE JANEL
in moderate to high-salinity systems MULTICOAT Water soluble asphaltic • • • • • 0.5-2
AQUA-COL S Glycol used to control sensitive shales, • • 4% Y
ECOFLUIDS
increase lubricity and lower HT-HP filtrate
in high-salinity systems CLAY KILL Low molecular weight shale inhibitor • • • • 1.0-10 Y
CARBO-TROL Clay swelling & hydration suppressant • varies ECOGLYCOL H HMW glycol clay/shale inhibitor • • • • 2%-5% Y
CHEK-TROL Clay swelling & hydration suppressant • • • • 2-3% ECO PHPA Anionic emulsion shale inhibitor • • • • 0.25-1.0 Y
CLAY-TROL Amphoteric surfactant • • • • 4-8 ppb Y ECO PHPA-L Anionic emulsion shale inhibitor • • • •
CLAY-TROL XPR Temperature stable shale hydration suppressant • • • • 4-6% EF-100N Polyglycerol shale inhibitor • • • • 5%-20% Y
ECCO-BLOK Water-dispersible natural resinous • • • • 2-6 ppb GUMBOTROL Gumbo Inhibitor • • • • 0.5-1 % Y
material for shale stabilization K-SUB KCL substitute • • • • Y
ECCO-GLYCOL Glycol for shale control • • • • varies CLAY DRILL High molecular weight inhibitor • • • • 0.5-2.0 Y
MAX-GUARD Clay hydration suppressant • • • • 1-7 ppb STRATADRILL Amine clay inhibitor • • • • 4-10 ppb Y
MAX-PLEX Aluminum and resin complex for shale stability • • • • 1-5 ppb ECONITE Liquid gilsonite • • • • 1-3%
MAX-SHIELD Deformable sealing polymer for shale stability • • • • 2-4% Y EMERY
MAX-SHIELD NS Deformable sealing polymer • • • • 2-4% TERRADRIL 568 For aqueous systems, water dissovable, • •
NANOSHIELD Dry deformable sealing polymer for shale stabilit • • • • 1-5 lb/bbl saturated salt
NEW-DRILL High-molecular weight anionic liquid polymer • • • • 1.5-2% Y GRAIN PROCESSING CORPORATION
NEW-DRILL HP Powdered polymer for improved shale control • • • • 1.5-2 ppb Y CONTROL I-166 Alkaline starch • • • • 3% Y
NEW-DRILL LV Low viscosity PHPA • • • • 1-3 ppb CONTROL I-910 Deflocculant, calcium control agent • • • 3-5 Y
NEW-DRILL LV STICK Low viscosity polymer Stick • • • • as needed CONTROL I-920 Deflocculant, calcium control agent • • • 3-5 Y
NEW-DRILL NY Cuttings encapsulant approved for use in Norway • • • • 1-3 ppb CONTROL I-930 Deflocculant, calcium control agent • • • 3-5 Y
NEW-DRILL PLUS Powdered, high-molecular weight, • • • • 1-3 ppb Y GUMPRO
partially hydrolyzed polyacrylamide GEL ASPHATEX Sulphonated Asphalt • • • • • • 2-10 •
NEW-DRILL STICK Polymer Stick • • • • as needed GEL COL M Medium Cloud point Temperature Glycol • • • 10-20
PROTECTOMAGIC Oil-soluble, air-blown asphalt used with oil • • • • 2-8 ppb GEL COL H High Cloud point Temperature Glycol • • • 10-20 •
PROTECTOMAGIC M Water-dispersible, air-blown asphalt • • • • 2-8 ppb Y GEL PA Polyamine Base Shale inhibitor • • • • 6-10 •
SHALE-BOND Water-dispersing, naturally-occurring asphalt • • • • 2-6 ppb Y GEL PHPA Partially Hydrolysed Polyacrylamide • • • • 0.1-1.5 •
SHALE-PLEX Aluminum complex for shale stability • • • • 1-4 ppb GEL PHPA L Partially Hydrolysed Polyacrylamide Liquid • • • • 1.5-4.5
SULFATROL Sulfonated asphaltic material • • • • 2-6 ppb Y IMPACT FLUID SOLUTIONS
TERRA-COAT Deformable sealing polymer for TERRA-MAX • • • • • 2 ppb Y
FLC 2000 Stabilizes mechanically weak shales • • • • • • 3.0-8.0 Y Y Y
BAROID FLUID SERVICES StAR FLH Stabilizes mechanically weak shales • • 3.0-6.0 Y Y
AK-70 Asphaltic blend • • • • • • 5.0-15.0 Y StAR HIB L Organic Shale inhibitor • • • 2% - 5% Y Y
BARABLOK Powdered gilsonite, wallcake enhancer • • • • • • 5.0-35.0 Y Y StAR HIB CF Organic Shale inhibitor - chloride free • • • 2% - 5% Y
BARABLOK 400 Hi-temp powdered gilsonite • • • • • • 5.0-35.0 Y StAR GLYCOL SF Organic Shale inhibitor - glycol salt free • • • 2% - 5% Y
BARACAT Cationic polymer solution • 1.0-3.0 Y KELCO OIL FIELD GROUP
BARASIL-S Sodium silicate solution • 2-10% Y Y
CELPOL R Purified PAC high visc • • • • 0.25-2 Y Y
BARO-TROL PLUS Enhanced shale stabilizer • • • 2.0-6.0 Y
CELPOL RX Purified PAC high visc • • • • 0.25-2 Y Y
BORE-HIB Shale inhibitor blend-BOREMAX system • 1-2 vol%
CELPOL SL Purified PAC low visc • • • • 0.25-2 Y Y
BORE-HIB II Liquid inorganic salt blend • • •
CELPOL SLX Premium purified PAC low visc • • • • 0.25-2 Y Y
BORE-PLUS Shale stabilizer-BOREMAX system • 0.2-3 Y
FINNFIX BOL Middle visc CMC • • • • 2-3 Y Y
BXR Borehole stabilizer • • • • 4.0-20.0 Y
FINNFIX H CMC high viscosity pure • • • • 0.2-3 Y Y
BXR-L Borehole stabilizer suspension • • • • 8.0-40.0 Y
FINNFIX HC High visc CMC • • • • 2-3 Y Y
CLAY FIRM Shale stabilizer-HYDROGUARD system • 5.0-8.0 Y
FINNFIX LC Low visc CMC • • • • 2-3 Y Y
CLAY GRABBER Shale encapsulator • • • • 0.5-2.0 Y
FINNFIX RC Middle visc CMC • • • • 2-3 Y Y
CLAY SYNC Shale stabilizer-HYDROGUARD system • 2.0-4.0 Y Y
MF-1 Non-ionic polyacrylamide • • Y
CLAY SYNC II Shale stabilizer-HYDROGUARD system • 2.0-4.0 Y
MF-55 Non-ionic polyacrylamide - liquid • • Y
CLAYSEAL Amphoteric compound shale stabilizer • • • • 4.0-8.0 Y
X-PEL-G Water dispersible gilsonite • • • • 2-4 Y
CLAYSEAL PLUS Amphoteric compound shale stabilizer • • • • 4.0-8.0 Y Y
LAMBERTI SPA
EZ-MUD Shale stabilizing polymer solution • • • • 1.0-4.0 Y
HYBSTAR CFA Chloride free neutralized polyamine • • • • 1-3% Y Y
EZ-MUD DP Powdered shale stabilizing polymer • • • • 0.25-1.5 Y Y
HYBSTAR HS Neutralized polyamine hydration suppressant • • • • 1-3%
EZ-MUD GOLD Beaded shale stabilizing polymer • • • • 0.25-1.5 Y Y
HYBSTAR L Amine derivative based • • • • 1-3%
GEM CP Polyglycol • • • • 5-7% Y Y
HYBSTAR PW Amine derivative in powder form • • • • 1-3%
GEM GP Polyalkylene glycol • • • • 2-6% Y Y
HYBSTAR R Amine derivative based • • • • 1-3%
GEM SP Polyglycol • • • • 2.0-15.0 Y
DRILLAM EL Liquid PHPA encapsulator • • • • 0.3-3
MEGAGEN Sodium silicate solution • 2-10%
K PAC LOVIS Potassium low viscosity PAC • • • 0.2-3 Y
PERFORMATROL Shale inhibitive polymer • • • 2-3% Y Y
K PAC REGULAR Potassium high viscosity PAC • • • 0.2-3 Y
CABOT SPECIALTY FLUIDS
PAG 102 Polyglycol inhibitor (Low cloud point) • • • • 3% Y
CESIUM ACETATE Density to 2.3 sg (19.2 ppg) • •
PAG 211 Polyglycol inhibitor (Medium Cloud Point) • • • • 3% Y
CESIUM FORMATE Density to 2.3 sg (19.2 ppg) • • E N
LAMBERTI USA
CESIUM FORMATE/ Density to 2.42 sg (20.18 ppg) • •
ACETATE BLEND HIBSTAR HPF Amine based shale inhibitor • • • • 0,5-3%
MIXED FORMATES Densities from 1.0 sg to 2.3 sg • E Y PAG GP General purpose glycol • • • • 0,5-5%
POTASSIUM FORMATE Density to 1.57 sg (13 ppg) • E Y N LIQUID CASING
SODIUM FORMATE Density to 1.3 sg (10.8 ppg) • E Y Y LIQUID CASING Polycrystalline • • • • • • 8 Y
CESCO CHEMICAL LIQUID CASING II Polycrystalline • • • • • • 6 Y
CESCO C-G Pretreated gilsonite • • • • 4-6 Y O-M SEAL Polycrystalline • • • • • • 50 Y
DEEP SOUTH CHEMICAL MAYCO WELLCHEM
DD DRLG DETERGENT Detergent & wetting agent • 0.05 gal/bbl MAYCO-KLAYTROL Clay inhibitor • • • • 1-4
DRILLING SPECIALTIES CO. MESSINA
DRILLPAC HV High viscosity polyanionic cellulose • • • • 0.25-2.5 Y Y BORE-TROL Shale/borehole stabilizer/mud conditioner • • • • • • 4-8 Y
POLYMER CLA-STAB Shale control/clay stabilizer • • • • 0.35-3.5
DRILLPAC LV Low viscosity polyanionic cellulose • • • • 0.25-2.5 Y Y CLA-STAB-II Shale control/lubricant • • • • 0.35-3.5
POLYMER KLEEN-PPG Various glycols • • • • 14-35
DRISCAL D High temperature synthetic polymer • • • • 0.5-2.5 Y Y MICRO-SEAL Liquid hydrocarbon compound • • • 2 Y
POLYMER POLYTROL-1000 Encapsulating high-molecular weight polymer • • • .4 Y
DRISPAC PLUS Dispersable HV polyanionic cellulose • • • • 0.25-2.5 Y Y REDI-COAT Encapsulating/filming polymer, PHPA • • • .5 Y
REGULAR REDI-COAT-PLUS Concentrated encapsulating/filming polymer • • • .5 Y
DRISPAC PLUS Dispersable LV polyanionic cellulose • • • • 0.25-2.5 Y Y SUPER-BORE-TROL Potassium-based Shale/borehole • • • • • • 3-6 Y
SUPERLO stabilizer/mud conditioner
DRISPAC REGULAR High viscosity polyanionic cellulose • • • • 0.25-2.5 Y Y THERMO-SEAL Hydrocarbon resin powder • • • 4 Y
POLYMER THERMO-SEAL-L Liquid bitumen borehole stabilizer 3-14
DRISPAC SUPERLO Low Viscosity polyanionic cellulose • • • • 0.25-2.5 Y Y M-I SWACO
POLYMER
ASPHASOL Blend of sulfonated organic resins • • 4-10 N N Y
DRISTEMP POLYMER High temperature synthetic polymer • • • • 0.5-2.5 Y Y
ASPHASOL D Sulfonated organic blend • • • 4-10 N N
GREENBASE Liquid High Viscosity cellulosic polymer • • • • 0.5-5.0 Y Y
ASPHASOL SUPREME Sulfonated asphalt • • • • • 1-8
DRISPAC POLYMER
DI-INHIB Shale inhibitor for the DIPRO system • 3 vol%
LIQUID DRISPAC High viscosity polyanionic cellulose • • • • 0.5-4.0 Y N
POLYMER DRILPLEX Viscosifier for DRILPLEX system • • 1-3 Y
DRIL-KLEEN Low-toxicity detergent • • • • 0.2-1 N N Y

www.offshore-mag.com • September 2012  Offshore  67

 Plonor listing available

Plonor listing available

HOCNF classification

HOCNF classification
Passed LC50 test

Passed LC50 test

Synthetic fluid

Synthetic fluid
Saturated salt

usage (Ib/bbI)

Saturated salt

usage (Ib/bbI)
Nondispersed

Nondispersed
concentration

concentration
Fresh water

Fresh water
Dispersed

Dispersed
Oil-based

Oil-based
Normal

Normal
Product Product
name Description name Description
ENVIROBLEND Salt for ENVIROVERT system • SKL-100 Environmental replacement for KCL • • • • 1-4
FLOXIT Clay flocculant • • 0.1-2 N N Y QUARON N.V.
GLYDRIL GP Polyalkylene glycol with low cloud point • • • 7-17.5 Y N MC DEX Mud thinner / shale stabilizer • • • • 2-5
GLYDRIL HC Polyalkylene glycol with high cloud point • • • 7-17.5 N N MC K-SOL Potassium asphalt sulphonate • • • • 2-5
GLYDRIL LC Polyalkylene glycol with low cloud point • • • 7-17.5 Y N MC SIP Shale inhibitive polymer • • • 1-3
GLYDRIL MC Polyalkylene glycol with medium cloud point • • • 7-17.5 Y N MC SOL Sodium asphalt sulphonate • • • • 2-5
HIBTROL Fluid loss additive & secondary shale inhibitor • • • 1-5 Y N SETAC
HIBTROL HV Fluid loss additive & secondary shale inhibitor • • • 1.4-7 Boremaster Modified Lignite/carbon matrix • • • 2-6
HIBTROL ULV Ultra-low vis filtration control additive • • • 2.1-7 DRILL FAST ROP enhancer and lubricant • • • • 2-10% Y
and secondary shale inhibitor
SPECIAL PRODUCTS
IDCAP D Polymeric shale inhibitor • • 0-4 Y N Y
PRODUCT 239 Clay inhibitor • • • • 1-2 Y
INHIBYCOL XT Wide-molecular-weight glycol • • • • 7-17.5
PRODUCT 6166 Clay Inhibitor • • • • 1-2
K-17 Potassium lignite • • • 1-15 N N Y
K-52 Non-chloride potassium supplement • • • • 1-5 N N Y SUN DRILLING PRODUCTS
KLA-CURE Hydration suppressant • • • 4-8 Y N Y BLACKNITE Multi-particle sealing in liquid dispersion • • • • 2% Y
KLA-CURE II Hydration suppressant and detergent • • • • 4-8 C-MUL (PAO) Polyalphaolefin, ROP enhancer • • • • 3% Y
KLA-GARD Shale inhibitor & hydration suppressant • • • 4-8 Y N Y COASTALUBE (PAO) Polyalphaolefin liquid lubricant • • • • 3% Y
KAL-GARD B Salt-free KLA-GARD • • • 4-8 N N Y DRIL-CON Clay hydration suppressant • • • • 1% Y
KLA-HIB Liquid amine shale inhibitor • • • GUMBOSHIELD Gumbo inhibitor • • • • 3% Y
KLA-PLEX Potassium-base shale inhibitor • • TBC-BRINADD
KLA-SENTRY Shale inhibitor for lignosulfonate muds • BORECLEAN High molecular weight glycol 100
KLA-STOP Shale inhibitor • • • 2-4vol% N N CL FREE Organic amine • • • 3% by vol Y
KLA-STOP NS Shale inhibitor • • • 1-4vol% INHIBISAL ULTRA Low molecular weight polyglycol • • • 3% by vol Y
KLAFLOC I Low-cost shale inhibitor for floc water drilling • 1-4vol% INHIBISAL ULTRA B Low molecular weight polyglycol • • • 3% by vol Y
M-I PAC R Pure PAC polymer, technical grade • • • 2-5 Y Y TETRA TECHNOLOGIES, INC.
M-I PAC UL PAC polymer, low viscosity, technical grade • • • 2-5 Y Y PAYZONE STAY Clay Stabilizer • •
PARAMIX A Salt for the PARALAND system • 17-223 PAYZONE STRATAFIX Shale/clay stabilizer • •
PARAMIX N Salt for the PARALAND system • TURBO-CHEM INTERNATIONAL
POLYPAC R Polyanionic cellulose • • • • 0.5-2 Y Y Y TURBO-PHALT Gilsonite/resin • • • • 4 Y
POLYPAC ELV Extra-low-viscosity PAC • • • • 0.5-2 Y N VENTURE CHEMICALS
POLYPAC SUPREME R PAC, premium grade • • • • 0.5-2 Y N VEN-TROL 401 Resin-coated micronized, cellulose fiber • • • • • 2-6 Y
POLYPAC PAC, premium grade, ultra-low viscosity • • • • 0.5-2 Y N WEATHERFORD INTERNATIONAL LTD.
SUPREME UL
ALPHA 9206 Shale control amine • • • 0.01-1
POLYPAC UL PAC, ultra-low viscosity • • • • 0.5-2 Y N
CC-200 Polymer/formate shale control • • • 0.002 Y
POLY-PLUS High m.w. PHPA polymer • • • 0.5-4 Y N Y
CC-300 Copolymer/formate shale control • • • 0.2%-0.5% Y
POLY-PLUS DRY Dry PHPA polymer • • • 0.25-2
SC-900 Shale control copolymer • 1000-2000 ppm
POLY-PLUS LV Low-viscosity PHPA polymer • • • 0.25-2 N N
POLY-PLUS RD Readily dispersible PHPA dry powder • • • 0.5-4 Y N Y SPOTTING FLUIDS, LUBRICANTS
POROSEAL Latex-modified starch polymer • • • 2-5vol% ASAP FLUIDS
SHALE-CHEK Shale control additive • • • • 5 N N ASAP FREE W Environ. friendly weighted spotting fluid • • • • 45
SILDRIL D Dry sodium silicate • • • 9-15 Y Y ASAP FREE N/W Environ. friendly non-weighted spotting fluid • • • • 35 -45
SILDRIL K Potassium silicate version of SILDRIL • • • 8-12% ASAP STUCK FREE Spotting Fluid • • 80
SILDRIL L Liquid sodium silicate • • • 5-8% Y Y ASAP EP TORQUE Environ. friendly Universal EP Lubricant • • • • • • 3.5-5.5
SP-101 Sodium polyacrylate polymer • • • • 0.5-2 N N Y REDUCER
TARCLEAN Anticrete agent for heavy oil • 100% app ASAP SIL EPL Environ. friendly EP Lubricant FOR Sodium Silicate • • • • 10-12
ULTRACAP Encapsulator for ULTRADRIL system • • 1.5-3 ASAP EBL Ester based Lubricant • • • • • • 3.5 -5.5
ULTRACAP NS Biodegradable shale encapsulator • • ASAP LUBE Environmental friendly Universal Lubricant • • • • 3.5 -5.5
ULTRACAP PLUS Polymeric shale inhibitor for ULTRADRIL system • • 2-4 BAKER HUGHES DRILLING FLUIDS
ULTRAHIB Shale inhibitor for ULTRADRIL system • • 2-4 vol% AQUA-MAGIC Differential sticking preventative for depleted zones • • • • 2-4% Y
ULTRAHIB NS ULTRAHIB variant for North Sea • • 2-4vol% AQUA-MAGIC XPR Oil-free differential sticking preventative • • • • 2-4% Y
UNIPAC SUPREME UL Dispersible, regular-grade PAC • • • • 0.25-1 BIO-DRILL Polyol-based drilling/ROP enhancer • • • • 2-4% Y
XP-20K Potassium causticized chrome lignite • • • 1-15 N N Y BIO-SPOT Non-hydrocarbon, low toxicity spotting fluid • • • • as needed Y Y
XP-20 N Chrome lignite, neutralized • • • 1-15 N N BIO-SPOT XPR nontoxic, oil-free, water-soluble fluid • • • • as needed Y
MONTELLO for freeing stuck pipe
MON PAC Polyanionic cellulose • • • • 0.25-2 Y BLACK MAGIC Oil-base spotting fluid • • • • as needed
MON PAC ULTRA LO Polyanionic cellulose • • • • 0.25-2 Y BLACK MAGIC CLEAN Environmentally-safe spotting fluid • • • • as needed Y
NEWPARK DRILLING FLUIDS BLACK MAGIC LT Low-toxicity, oil-base spotting fluid • • • • as needed
DEEPDRILL INHIBITOR Proprietary HPWB shale inhibitor • • • • 3-20 vol% BLACK MAGIC Spotting fluid without asphalt • • • • • • as needed Y
DYNACOL Glycol shale stabilizer • • • • 0.7-5 vol% PHALT FREE
DYNANITE Gilsonite • • • • 2-6 BLACK MAGIC SFT Oil-base spotting fluid concentrate • • • • as needed Y
FLEXFIRM Potassium silicate shale stabilizer • • • • 0.25-2 ECCO-LUBE WBM lubricant • • • • 0.5-2%
HIPERM Amine shale inhibitor • • • 0.3-0.6 vol% LATILUBE High temperature lubricant • • • 2-4%
LST-MD Liquid sulfonated asphalt • • • • 2-3 vol% LATIMAGIC Wellbore stabilizer and lubricant • • • 5-10 ppb
NEW100 Blend of polyglycerines • • • • • • 4-5 vol% LATIRATE Rate of penetration enhancer and lubricant • • • 2-4%
for water-based fluids
NEW100 N Blend of polyglycerines • • • • • • 4-5 vol%
LC-GLIDE Spherical carbon material for torque • • • • • • 2-12 ppb Y Y
NEWPHASE Blend of polyglycerines • •
and drag reduction
NEWPHALT Sulphonated asphalt • • • 2-8
LC-LUBE Sized, synthetic graphite • • • • • • 2-8 ppb Y
NEWPHPA PHPA • • • • 0.2-2
LC-LUBE FINE Sized, synthetic graphite • • • • • • 2-8 ppb Y
NEWPHPA D PHPA • • • • 0.25-1
LUBE-622 WBM lubricant • • • • 2-4% Y
NEWPHPA DLMW Low molecular weight anionic PHPA • • • • 1-3
LUBRI-GLIDE COARSE Spherical CPC friction reducer • • • • • • As needed
NEWPHPA DSL Very low molecular weight PHPA • • • • 1-4
LUBRI-GLIDE FINE Spherical CPC friction reducer • • • • • • As needed
NOV FluidControl
MIL-GLIDE Spherical glass drilling bead used • • • • • • 2-6 ppb
PETRO-TITE Gilsonite • • • • • 2-8 Y as a boundary lubricant
K-TROL Potassium acetate, liquid • • • 2-6 MIL-GLIDE FINE Fine grade spherical glass drilling bead • • • • • • 2-6 ppb
NOV TEX Proprietary Blend • • • • • 1-5 Y MIL-GLIDE CP Spherical copolymer drilling bead used • • • • • • 2-12 ppb
POTASSIUM Salt • • As needed as a boundary lubricant
CHLORIDE MIL-GLIDE CP FINE Fine spherical co-polymer drilling bead • • • • • • 2-12 ppb
SOLTEX Asphalt • • • • 4-8 Y MIL-GRAPHITE Graded graphite used primarily • • • • • • 5-20 ppb
PETRO-TITE LIQUID Gilsonite blend liquid • • • • 2-6 to enhance lubricity and sliding
STARTROL Asphalt blend • • • • 2-6 MIL-LUBE Vegetable oil-base boundary and • • • • 2-4% Y
TRIPLE A Anti-accretion agent • • • • .5-3.0 % Y extreme pressure lubricant
OLEON N.V. NF2 Gas hydrate inhibitor • • • • 10-40% Y Y
RADIAGREEN EBL Env. friendly ester based lubricant • • • • 1 - 3% Y N Y NF3 Gas hydrate inhibitor • • • • • 5-40% Y
RADIAGREEN EBO General purpose lubricant & ROP enhancer • • • • • • 4 - 6% Y N Y OMNI-LUBE EP lubricant for emulsion systems • • 2.5-4%
RADIAGREEN Lubricant for heavy brines • • • 1 - 3% Y N Y OMNI-LUBE V2 Lubricant for invert emulsion drilling fluids • • 2.5-4%
EME SALT PENETREX ROP enhancer & anti-bit balling/accretion additive • • • • 2-3% Y
RADIAGREEN SL Lubricant for pH system >10 • • • 2 - 5% Y N Y PENETREX NS ROP enhancer–designed • • • • 2-3% Y
PQ CORP. for North Sea applications
ECODRILL Silicate drilling fluid • • 5 - 20% PENETREX XPR ROP enhancer formulated for offshore use • • • • • • 2-3%
PRIME ECO GROUP INC. PLUG-DRILL FR Friction reducer for plug-drill outs • • 1-2.5 ppb
PROTECTOMAGIC Oil soluble, air-blown asphalt used with oil • • • • 2-6 ppb
DT-2002 Blended polyglycerol • • • • Y
PROTECTOMAGIC M Water-dispersible, air-blown asphalt • • • • 2-6 ppb Y
DT-SAS Sulfonated asphalt • • • • 4-10 N N Y

68  Offshore  September 2012 • www.offshore-mag.com

 Plonor listing available

Plonor listing available

HOCNF classification

HOCNF classification
Passed LC50 test

Passed LC50 test

Synthetic fluid

Synthetic fluid
Saturated salt

usage (Ib/bbI)

Saturated salt

usage (Ib/bbI)
Nondispersed

Nondispersed
concentration

concentration
Fresh water

Fresh water
Dispersed

Dispersed
Oil-based

Oil-based
Normal

Normal
Product Product
name Description name Description
TEQ-LUBE II Environ.-acceptable lubricant for WBM • • • 3-5% LUBRICANT OBM Invert muds lubricant • • 1-3%
TEQ-LUBE NS Environ.-acceptable lubricant for WBM • • • 3-5% LUBRICANT ROP Rate of penetration enhancer • • • • 1-3%
in the North Sea PRESANTIL 873 Hydrocarbon free spotting fluids • • • • • •
TERRA-RATE ROP enhancer for TERRA-MAX • • • 1-4% PRESANTIL USP Unweighted spotting fluids • • • • • •
TERRA-RATE XPR ROP enhancer for TERRA-MAX • • • 2-6% PRESANTIL WSP Weighted spotting fluids • • • • • •
BAROID FLUID SERVICES LIQUID CASING
BARO-LUBE Surfactants/lubricant blend • • • • 2.0-6.0 Y LIQUID CASING Polycrystalline • • • • • • 8 Y
GOLD SEAL LIQUID CASING II Polycrystalline • • • • • • 6 Y
BARO-LUBE NS Surfactants/lubricant blend • • • • 2.0-6.0 Y Y O-M SEAL Polycrystalline • • • • • • 50 Y
CMO-568 Oil mud lubricant • 2.0-6.0 Y MAYCO WELLCHEM
DRIL-N-SLIDE ROP enhancer • • • • 2.0-5.0% Y Y KLEEN-PAK Completion fluid package • • 2-3
EZ SPOT Spotting fluid concentrate • • • • as needed MAYCO SLURRY Lost circulation spotting fluid • • • • • 50
ENVIRO-TORQ Broad-spectrum lubricant • • • • 2.0-6.0 Y OILSPOT-FT Spotting fluid package • • • • 75
EP MUDLUBE Extreme-pressure lubricant • • • • 2.0-6.0 Y OILSPOT-L Premium weighted spotting fluid • • • • 24
EZ GLIDE Lubricant • • 1.0-3.0 Y OILSPOT-P Spotting fluid package • • • • 50
GRAPHITE Carbon platelets • • • • • • 5.0-40.0 Y Y Y POLY-SLICK Copolymer bead lubricant • • • • 4 Y
LIQUI-DRIL ROP enhancer • • • < 1.0 Y SLICKPIPE Mud lubricant • • • 4
LUBRA-BEADS Copolymer bead lubricant, F and C • • • • • • 4.0-8.0 Y SLICKPIPE EP Extreme pressure mud lubricant • • • 4 Y
NXS-LUBE Extreme-pressure lubricant • • • • 2.0-8.0 Y STUCK-BREAKER Pipe freeing compound • • • • 8
QUIK-FREE High performance spotting fluid • • • • As needed Y STUCK-BREAKER-W Weighted spotting fluid • • • • 12
STICK-LESS 20 Spherical glass beads • • • • • • 4.0-8.0 Y Y Y
MESSINA
TORQ-TRIM 22 Lubricant • • • • 2.0-6.0
OILSPOT-P Spotting fluid package • • • • 50
TORQ-TRIM II Lubricant • • • • 2.0-6.0 Y Y
OILSPOT-L Premium weighted spotting fluid • • • • 24
TORQ-TRIM II PLUS Lubricant • • • • 2.0-6.0 Y Y
OILSPOT-FT Spotting fluid package • • • • 75
TORQUE-LESS DI-170 Spherical glass beads • • • • • • 4.0-8.0 Y Y Y
POLY-SLICK Copolymer microbead lubricant • • • • 4 Y
XLR-RATE ROP enhancer • • • 1.0-4.0 Y
SLICKPIPE Mud lube, regular & non-toxic versions • • • 4
BOYSENBLUE/CELTEC INTERNATIONAL
SLICKPIPE-EP Extreme pressure mud lubricant • • • 4 Y
BLEN SEAL Cellulose fiber • • • • • • 6 Y SLICKPIPE-EP-II Low to extreme pressure lubricant • • • • 1-5
MEGASLIDE Glass beads ‘C’ • • • • • • 10 Y SLICKPIPE-NT Low toxicity lubricant • • • • 1-5
SUPERSLIDE Glass beads ‘Medium • • • • • • 10 Y SLICK-SEAL Sized cellulose lubricant • • • • 1-6
CHANDLER ENGINEERING
STUCKBREAKER Pipe freeing compound • • • • 8
ALPHA BORELUBE Environment safe lubricant • • • • .5 - 8.0
STUCKBREAKER-ES Non-toxic pipe freeing compound • • • • 8
ALPHA SAVESPOT Spotting fluid • • 1.0 -5.0
STUCKBREAKER-W Weighted spotting fluid • • • • 12
CRODA
M-I SWACO
ESLTADRIL L100 Silicate and calcium tolerant lubricant • • • 2-5%
ALPINE Lubricating beads • • • •
for water based muds
SPOTTING BEADS
KEMELIX VG20WAN Shale swell inhibitor • • • 2-5%
D-D Drilling detergent • • • • 0.5-6 N N Y
KEMELIX VG45WAN Saturated salt shale swell inhibitor • • • 2-5%
DRILFREE High-performance lubricant, antisticking agent • • • • 1-3% Y N
KEMELIX 7423X Shale swell inhibitor • • • 2-5%
DRIL-KLEEN Anti bit balling agent • • • • 0.2-1 N N Y
DRILLSAFE JANEL DRIL-KLEEN II Anti bit balling agent • • • • 0.2-0.5 N N
MULTILUBE A Non-polluting EP lubricant • • • • 1-5 FLO-LUBE Lubricant for coiled tubing applications • • •
MULTILUBE B Salt water EP lubricant • • • • 1-5 FLO-LUBE II High-performance lubricant for land drilling • • •
MULTI-POL SP Pipe-freeing agent • • • • • 1.5-3 GLYDRIL GP Polyalkylene glycol with low cloud point • • • • 7-17.5 Y N
ECOFLUIDS GLYDRIL HC Polyalkylene glycol with high cloud point • • • • 7-17.5 N N
ECOFREE Pipe freeing agent • • • • GLYDRIL LC Polyalkylene glycol with low cloud point • • • • 7-17.5 Y N
DRILLFAST ROP enhancer • • • • 4-8 Y GLYDRIL MC Polyalkylene glycol with medium cloud point • • • • 7-17.5 Y N
STRATABEADS Glass beads • • • • • • 10-40 G-SEAL Coarse sized graphite • • • • • • 15-20 Y Y
STRATALUBE Glycol EP lubricant • • • • 2%-6% Y IDLUBE XL Extreme pressure lubricant • • • • 1-6
EMERY LOTORQ Lubricant for FLOPRO system in Alaska • • • • 1-3 vol%
DEHYLUB 197 Lubricant for silicate muds, alcohol based • • 2-6 LUBE-PLEX Lubricant for enhanced DRILPLEX system •
DEHYLUB 594 Environ. Friendly lubricant, ester based • • • • 1-4 LUBE XLS Extreme pressure lubricant • • • • 1-6 Y
DEHYLUB 639 W Lubricant As needed LUBE-100 Low-toxicity lubricant • • • • 4-6 N N Y
DEHYLUB 1037 OBM lubricant, ester based • • • • • • 1-3 LUBE-167 Lower-toxicity lubricant • • • • 4-16 Y N Y
DEHYLUB 1111 OBM/WBM lubricant, esterblend • • • • • • 1-3 LUBE-776 Lubricant for LSND muds • 1-3 vol%
DEHYLUB 1200 WBM lubricant, ester based • • • • 1-3 LUBE 945 WBM lubricant • • • • 4-16
DEHYLUB 1222 WBM lubricant, ester based • • • • 1-3 M-I LUBE General-purpose lubricant • • • • 1-3% N N
DEHYLUB 1316 WBM lubricant, ester based • • • • 1-3 PIPE-LAX Stuck pipe surfactant • • • • • 8.3 N N Y
DEHYLUB 1324 OBM/WBM lubricant, esterblend • • • • • 1-3 PIPE-LAX ENV Low-toxicity stuck pipe solution • • • • 100% N N Y
DEHYLUB 1757 WBM lubricant, ester based • • • • 1-5 PIPE-LAX ENV WH Water soluble low toxicity stuck pipe solution • • • • 100%
GUMPRO PIPE-LAX OB Stuck pipe solution for Invert Emulsion systems • • 100%
GEL FREE W Environ. friendly weighted spotting fluid • • • • 45 PIPE-LAX W EXPORT Stuck pipe solution concentrate • • • • • 30.3 N N Y
GEL FREE N/W Environ. friendly non-weighted spotting fluid • • • • 35 -45 SAFE-LUBE Water-soluble brine lubricant • 0.6 vol% N N
STUCK FREE Spotting Fluid • • 80 SCREENKLEEN Screen cleaner for drilling tar sands 100%
GEL EP TORQUE Environ. friendly Universal EP Lubricant • • • • • • 3.5-5.5 SILDRIL EPL Silicate-base extreme pressure lubricant • • • 5-8% N N
REDUCER SIL-LUBE Lubricant for SILDRIL system • • 1-3% N N
GEL SIL EPL Environ. friendly EP Lubricant • • • • 10-12 • STARGLIDE Lubricant for WBMs • • • • 1-3 vol%
FOR Sodium Silicate STAR-LUBE Brine Lubricant • 2 vol%
GEL EBL Ester based Lubricant • • • • • • 3.5 -5.5 STEEL LUBE EP Extreme-pressure lubricant • • • • 1-3 vol%
GEL LUBE Environmental friendly Universal Lubricant • • • • 3.5 -5.5 ULTRAFREE ROP Enhancer for the ULTRADRIL system • • • 1-2 vol%
KEMTRON TECHNOLOGIES ULTRAFREE L Low-cost anticrete • • • 1-2vol%
K LUBE Hydrocarbon lubricant • • • • ULTRAFREE NH Non-hydrocarbon version of ULTRAFREE • • • 1-2vol%
LAMBERTI SPA VERSALUBE Oil-soluble lubricant • • 1-3 N N
DRILQUICK AC ROP enhancer, anti accretion • • • • 1-3% MONTELLO
EMULUBE OBM Effective OBM lubricant • • 1-3% HME ENERGIZER Selective non-ionic wetting agent • • • • 0.1-1 Y
FRONLUBE 100 Top range lubricant for salty environment • • • • • • 1-3% NEWPARK DRILLING FLUIDS
FRONLUBE 200 Top range, ester based lubricant • • • • • • 1-3% DYNACOL Glycol shale stabilizer • • • • 0.7-5 vol%
LUBRICANT CD All purpose lubricant • • • • .5-5 DYNAFREE Blend of lubricants & surfactants • • • •
LUBRICANT EHB Environ. friendly lubricant for heavy brines • • • • 1-3% DYNAVERT SFT 1-sack blend of emulsifiers & gellants • • • •
LUBRICANT EP Extreme pressure lubricant • • • • 1-3% EVOLUBE DPE HPHT Drilling Performance Enhancer • • 2-4 vol%
LUBRICANT F/458 Lubricant for high temperature • • • • .5-5 EVOLUBE S Modified ester ROP enhancer • • • • 2-5 vol%
LUBRICANT SL Lubricant for silicate fluids • • • • 1-3% NEW100 Blend of polyglycerines • • • • • • 3-4 vol%
LUBRICANT CBR 600 Environmentally friendly brine soluble • • • • 1-3% Y Y NEW100 N Blend of polyglycerines • • • • • • 3-4 vol%
LUBRICANT 29 Cost effective, environ. friendly lubricant • • • • 1-3% NEWEASE HT Synthetic ROP enhancer • • • • 2-5 vol%
LUBRICANT 73 Water soluble lubricant • • • • 1-3% NEWPHASE Blend of polyglycerines • •
PRESANTIL Pipe freeing agent for unweighted spotting fluids • • • • • • 5-20 NEWPHPA PHPA • • • • 0.2-2
PRESANTIL OBM Effective OMB pipe-freeing agent • • 5-20 NEWPHPA D PHPA • • • • 0.25-1
PRESANTIL W Pipe freeing agent for weighted spotting fluids • • • • • 30 NEWPHPA DLMW Low molecular weight anionic PHPA • • • • 1-3
PRESANTIL WNF Non flammable pipe freeing agent (weighted) • • • • • • 30-50 NEWPHPA DSL Very low molecular weight PHPA • • • • 1-4
LAMBERTI USA TOPSPOT Non-toxic organic blend • • • •
LUBRICANT GP479 General purpose lubricant • • • • 1-3% NOV FluidControl
LUBRICANT EPS Extreme pressure lubricant • • • • 1-3% DE-2000 ROP Enhancer • • • •

www.offshore-mag.com • September 2012  Offshore  69

 Plonor listing available

Plonor listing available

HOCNF classification

HOCNF classification
Passed LC50 test

Passed LC50 test

Synthetic fluid

Synthetic fluid
Saturated salt

usage (Ib/bbI)

Saturated salt

usage (Ib/bbI)
Nondispersed

Nondispersed
concentration

concentration
Fresh water

Fresh water
Dispersed

Dispersed
Oil-based

Oil-based
Normal

Normal
Product Product
name Description name Description
DL-100 EP Lubricant • • • • ASAP TROL AL Aminated Lignite • • 5-10
ECOSPOT Environmentally safe spotting fluid • • • • Y ASAP THIN-O OBM Thinner • • 1-3
TRAXX TC Metal Adhereing Lubricant • • • • Y ASAP SPILL CHECK Adsorbent for oil spill • • As per req.
OLEON N.V. ASAP RIG WASH Rig Wash • • • • • • 4-6
RADIAGREEN EBL Env. friendly ester based lubricant • • • • 1 - 3% Y N Y ASAP SOL Wellbore Clean UP Solvent • • 160
RADIAGREEN EBO General purpose lubricant & ROP enhancer • • • • • • 4 - 6% Y N Y ASAP SURF Spacer fluid for metal surface cleaning • • 35
RADIAGREEN Lubricant for heavy brines • • • 1 - 3% Y N Y BAKER HUGHES DRILLING FLUIDS
EME SALT AMPLI-FOAM FW Freshwater foaming agent • 1-2 gal/10 bbl
RADIAGREEN SL Lubricant for pH system >10 • • • 2 - 5% Y N Y AMPLI-FOAM SW Saltwater foaming agent • 1-2 gal/10 bbl
PRIME ECO GROUP INC. BIO-COTE Wetting agent for synthetic systems • • 2.4-24 L/m3 Y
DTS-2002 Polyalcohol no cloud point • • • • 3%-10% Y CLAY-COTE HT Wetting agent and secondary emulsifier • • 0.25-2 ppb
SETAC DEFOAMER Defoaming agent for completion fluids • • As needed
DRILLFAST Triglyceride ester micro emulsion • • • • 4 to 14 Y DOPE-FREE Pipe dope remover • • varies
DRILLFAST BASE Triglyceride ester base • • • • 4 to 14 Y DOPE-FREE ZN Pipe dope remover • • varies
SPECIAL PRODUCTS CLEAN-THREAD Pipe dope remover • • varies
PRODUCT 6055 Spotting compound • • • • MD Biodegradable drilling fluid detergent • • • • • .02-.04 gal/bbl
PRODUCT 6064 Drilling pipe lubricant (low toxicity) • • • • 1-2 MD-II Biodegradable drilling fluid detergent • • • • • .02-.04 gal/bbl
MICRO-PRIME OBM Displacement System • •
STRATA CONTROL SERVICES, INC.
MIL-CLEAN Water-soluble, biodegradable detergent/rig wash • • • • • • 1%
STRATA-LUBE Fatty acid based liquid lubricant • • • • 0.5-3.0
MIL-CLEAN E Biodegradable cleaner/degreaser • • • • • 1%
SUPER GLIDE BEADS Glass beads F-M-C • • • • • • 1-20+ Y
MIL-CLEAN SEA North Sea approved rig wash detergent • • 1%
STRATA-FLEX Fine Resilient Elastomeric Material • • • • • • 1-20+ y
MICRO-CURE AF E2 Acid-free mesophase remediation •
SUN DRILLING PRODUCTS
MICRO-CURE E2 Mesophase remediation •
C-MUL, (PAO) Polyalphaolefin, ROP enhancer • • • • 3% Y MUL-FREE RS Non-emulsifying surfactant 0.25-0.75%
COASTAL SPOT (PAO) Stuck pipe, spotting fluid • • • • As needed Y OMNI-COTE Wetting Agent all emulsion fluids • • • 0.1-1 gal/bbl
COASTALUBE (PAO) PAO-based lubricant& ROP enhancer • • • • 3% Y PACK-MUL Wetting agent for OMNI-PACK system • • 6-10 ppb
EZE-SLIDE Synthetic based Lubricant • • • • 1-2% Y PRIME 200HT Wellbore cleaning product • • Varies
LIQUIBEADS Liquid and mechanical lubricant • • • • • • 2% Y for high temperature displacements
LUBRA MAX Mechanical, solid spherical lubricant 4-6 lbs/bbl Y PRIME VIS HT Viscosifier for high temperature displacements • • 3-10 ppb
LUBRA GLIDE Mechanical, solid spherical lubricant • • • • • • 4-6 lbs/bbl Y SURF-COTE Wetting agent for oil-based drilling fluids • .1-.25 gal/bbl
TBC-BRINADD TECHNICLEAN 4570 Casing wash for oil and synthetic mud • • • As needed
CL FREE Multivalent, non-volatile amine 1-3% by vol TECHNICLEAN 4575 Casing wash for oil and synthetic mud • • • As needed
INHIBISAL ULTRA B Low molecular weight polyglycol • • • 3% by vol Y TECHNICLEAN 4580 Pipe dope removal and casing wash oil base mud • • • • As needed
LUBETEX Lubricant • • • 0.5 gpb Y ULTRA FLUSH Weightable WBM/OBM casing wash • • • • As needed
TETRA TECHNOLOGIES, INC. WELL WASH 100 Casing wash for water-based fluids • • 2-20%
CT 100 FR Friction reducer • WELL WASH 120 Casing wash for water-based fluids • • 2-20%
CT 200 FR Friction reducer • WELL WASH 400 Casing wash for oil and synthetic mud • • • 2-20%
PAYZONE FLC SLICK Solids free pill • • WELL WASH 610G Casing wash for oil and synthetic mud • • • 2-20% Gold Y Y
PAYZONE Solids free pill • • WELL WASH 2000 Casing wash for oil and synthetic mud • • • 2-20%
SMARTSEAL PAD WELL WASH 2020 Casing wash for oil and synthetic mud • • • • • • 2-20%
PAYZONE Lubricant • • WELL WASH 2050 Casing wash for oil and synthetic mud • • • 2-20%
STRATA GLIDE BAROID FLUID SERVICES
TETRAGLIDE Water-soluble brine lubricant • 0.6vol% N N AKTAFLO-S Non-ionic surfactant • • • • 0.5-7.0 Y
TURBO-CHEM INTERNATIONAL AQUATONE-S Non-ionic surfactant • • • • 0.5-7.0 Y
TURBO-LUBE Lubricant • • • • • 2% Y BARAKLEAN Degreaser and oil mud remover As needed Y
VENTURE CHEMICALS BARAKLEAN FL Wellbore cleaner for displacement 5% in H20 Y
VEN-LUBE II • • • • 6-10 Y BARAKLEAN FL PLUS Wellbore cleaner for displacement 5% in H20 Y Y
WEATHERFORD INTERNATIONAL LTD. BARAKLEAN GOLD Wellbore cleaner for displacement 5% in H20 Y Y
ALPHA 6111 Low toxicity spotting fluid • • 0.5-2 BARAKLEAN NS PLUS Wellbore cleaner for displacement 5% in H20 Y Y
ALPHA 6151 Lubricant/spotting fluid • • 0.5-2 N-FLOW BREAKERS Delayed, in-situ filter-cake breakers • • • • • • as needed Y Y
ALPHA 6156 Lubricant/spotting fluid • • 0.5-2 CON DET Mud detergent • • • • 0.25-1.0 Y
ALPHA 6177 Dispersant lubricant, low tox. • • 0.5-2 CON DET E Surfactant blend • • • • 0.25-1.0 Y
WELL FLOW INTERNATIONAL DHT FOAM Foaming agent 0.02-2.0%
KOPLUS D14 Med/high weight filter cake dissolver • • • • • • D DRILFOAM Foaming agent 0.1-1.0% Y
KOPLUS D17 High/extreme weight filter cake dissolver • • • • • • D DRILTREAT Oil wetting agent • 0.25-2.0 Y Y Y
KOPLUS LL Water base fluid pipe release additive • • • • E EXTENSOL Salt crystal growth inhibitor • 0.2-0.5
KOPLUS LO Water/Oil base fluid pipe release additive • • • • • • E PIPESCRUB Pipe dope remover As needed Y
SUPER PICKLE Blend of solvents • • • C QUIK-FOAM Foaming agent 0.02-2.0% Y
CRODA
S U R FA C TA N T S
AL 2559 Foaming agent • • • 0.01-0.3%
ARCHER DANIELS MIDLAND AL 2575 Foaming agent • • • 0.01-0.3%
ADM 500 “Green” emulsifier, lubricity enhancer, • • 0.25-2 Y ESTADRIL F100 pH switchable foamer • • • 0.01-0.3%
wetting agent MONAWET MO-70 Wetting agent • • • 0.01-1.0%
ADM 2100 Low viscosity “Green” emulsifier, • • 0.25-2 Y MONAWET SNO-35 Salt tolerant wetting agent • • • 0.01-1.0%
lubricity enhancer, wetting agent
PRIFER 6813 Environmentally friendly solvent • • 10-100%
ADM 750 “Green” surfactant, lubricity enhancer, • • • • 0.25-2 Y
SPAN 80 Oil spill dispersants • • 40-60%
wetting agent, secondary emulsifier
SYNPERNONIC Low foam wetting agent • • • 0.01-1.0%
ADM 3100 Low viscosity “Green” surfactant/lubricity • • • • 0.25-2 Y
enhancer, wetting agent, secondary emulsifier SYNPERNONIC A 11 Wetting agent • • • 0.01-1.0%
AQUA-CLEAR SYNPERNONIC High temperature low foam wetting agent • • • 0.01-1.0%
LF/RA 320
AIRFOAM 311 Foaming agent heavy salt water • 0.05 gal/bbl
SYNPERNONIC Environment friendly low foaming wetting agent • • 0.01-1.0% NCA
AIRFOAM 511 Foaming agent fresh water and mild salt water • 0.05 gal/bbl 850
AIRFOAM AP-50 Foaming agent fresh water and mild salt water • 0.05 gal/bbl TWEEN 80 Oil spill dispersants • • • • 40-60%
AIRFOAM B Foaming agent heavy salt water • 0.05 gal/bbl TWEEN 85 Oil spill dispersants • • • • 40-60%
AIRFOAM HD Foaming agent for foaming oil • • 0.05 gal/bbl
DRILLSAFE JANEL
ASAP FLUIDS
MULTI-FOAM Foaming agent • • • •
ASAP RIG WASH Rig Wash • • • • • • 4-6
EMERY
ASAP DET Mud detergent • • • • 2-3.5
SULFOTEX 853 B Foamer 0.5-3
ASAP CLAY Organo Clay Dry Blend • • 2-10
SULFOTEX 1137 Foamer 0.5-3
ASAP MUL- A i1 One Drum Emusifier • • 2-10
SULFOTEX 1138 Foamer 0.5-3
ASAP MUL- A i 1 HT One Drum Emusifier for High Temperatures • • 4-12
SULFOTEX 1139 Foamer 0.5-3
ASAP MUL LP Low Pour Point Emulsifier/ • • 4-12
Emusifier for cold regions GUMPRO
ASAP R MUL One Drum Emulsifier for Reservior Drilling • • 2-10 GEL DET Mud detergent • • • • 2-3.5
ASAP WET Wetting Agents • • 1.5-2.5 GEL CLAY Organo Clay Dry Blend • • 2-10
ASAP MUL P Primary Emulsifier • • 3-10 GEL MUL- A i1 One Drum Emulsifier • • 2-10
ASAP MUL S Secondary Emulsifier cum Wetting Agent • • 3-10 GEL MUL- A i 1 HT One Drum Emulsifier for High Temperatures • • 4-12
ASAP MOD Rheology Modifier • • 1-2 Gel Mul LP Low Pour point Emusifiers/ Emulsifiers • • 4-12
ASAP IS Instand Barite Suspender for Mud Transport • • 0.25-2.0 for Cold Regions
ASAP TROL Gilsonite • • 2-10 GEL R MUL One Drum Emulsifier for Reservoir Drilling • • 2-10
ASAP TROL HT High Softning Point Gilsonite • • 2-10 GEL WET Wetting agents • • 1.5-2.5
ASAP TROL P Polymeric Fluid Loss Reducer • • 1-3 GEL MUL P Primary Emulsifier • • 3-10
GEL MUL S Secondary Emulsifier cum wetting agents • • 3-10

70  Offshore  September 2012 • www.offshore-mag.com

 Plonor listing available

Plonor listing available

HOCNF classification

HOCNF classification
Passed LC50 test

Passed LC50 test

Synthetic fluid

Synthetic fluid
Saturated salt

usage (Ib/bbI)

Saturated salt

usage (Ib/bbI)
Nondispersed

Nondispersed
concentration

concentration
Fresh water

Fresh water
Dispersed

Dispersed
Oil-based

Oil-based
Normal

Normal
Product Product
name Description name Description
GEL MOD Rheology Modifier • • 1-2 SCREENKLEEN Stops screen blinding from tar & heavy oil • • • • 0.5-1 vol%
GEL IS Instant Barite Suspender for Mud Transport • • 0.25-2.0 STARGLIDE Lubricant for WBMs • • • • 1-3 vol%
GEL TROL Gilsonite • • 2-10 SUREMUL Primary emulsifier for synthetic systems • 2-8 N N Y
GEL TROL HT High Softning Point Gilsonite • • 2-10 SUREMUL EH Nondispersive emulsifier for SBM • 2-8
GEL TROL P Polymeric Fluid Loss Reducer • • 1-3 SURETHIN Thinner for synthetic systems • 0.5-2 N N Y
GEL TROL AL Aminated Lignite • • 5-10 SUREWET Wetting agent for synthetic systems • 1-5 N N Y
GEL THIN-O OBM Thinner • • 1-3 SWA EH OBM wetting agent for high-brine-content systems • 1-5 N N
GEL SPILL CHECK Adsorbent for oil spill • • As per Req. TARLIFT Solvent for the SAGDril system • 0.1-2 vol%
GEL RIG WASH Rig Wash • • • • • • 4-6 TARSURF Water-wetter for the SAGDril system • 0.02-0.5 vol%
GEL SOL Well Bore Clean Up Solvent • • 160 ULTRAFREE ROP enhancer for ULTRADRIL system • • • 1-2 vol%
GEL SURF Spacer Fluid for metal surface Cleaning • • 35 ULTRAFREE L Low-cost anticrete • • • 1-2vol%
KEMTRON TECHNOLOGIES ULTRAFREE NH Non-hydrocarbon version of ULTRAFREE • • • 1-2vol%
KT-BREAKER Propretary, hydrocarbon base • • • • 0.1 to 0.3 ULTRAFREE NS ROP enhancer for WBM • • 1-2 vol%
LAMBERTI SPA ULTRAFREE II ROP enhancer for ULTRADRIL system • • 1-2 vol%
ALBISOL AT Cleaner/spacer • • • • • • 2-10% VERSACOAT Wetting agent & emulsifier • 1-8 N N
ALBISOL CF Environmental friendly washer / spacer • • • • • • 2-10% Y VERSACOAT HF Emulsifier for OBM • 1-8 N N
ALBISOL DM Washer/spacer • • • • • • 2-10% VERSACOAT NA High flash point emulsifier for oil muds • 1-8 N N
ALBISOL F10 Environmental friendly mud • • • • • • 2-10% Y VERSATRIM Reduces oil on cuttings for OBM • 2-6
remover – direct emulsifier VERSAWET Wetting agent for OBM • 1-6 N N
ALBISOL K100 Cleaner/Spacer for grease residues • • • • • • 2-10% MONTELLO
ALBISOL OE Solvent based pipe cleaner • 2-10% HME ENERGIZER Wetting agent, coupler for gilsonite • • • • 0.1 - 0.5 PPB N N Y
DRILTAL DK Anti sticking / Anti bit balling • • • • 1-3 NEWPARK DRILLING FLUIDS
DRILTAL 131 Anti bit balling agent / cleaner • • • • 1-10 CYBERCOAT Surfactant & supplimental emulifier • 0.5-2
EMULAM PE Primary emulsifier for OBM • • 1-10 CYBERMUL Low toxicity emulsifier •
EMULAM SE Secondary emulsifier for OBM • • 1-10 CYBERPLUS Low toxicity emulsifier •
FOAMEX SAL Salt tolerant foaming agent • • • • 1-10 CYBERPLUS C Concentrated • • 4-6
FOAMEX TX Concentrate forming agent • • • 0.5-5 DYNADET Detergent • • • • 0.17-0.8
LAMBERTI USA DYNAMUL 204 Oil-in-water emulsifier • • •
ALBISOL DET Drilling detergent & anti bit balling agent • • • • 1-10 EVOCON Fluid conditioner • • • •
CLEAR RIG Effective cleaning agent • • • • 1-10 GILSONITE COUPLER Non-ionic gilsonite surfactant • • • • 0.1-0.3
DRILTAL Concentrated drilling detergent • • • • 1-8 OPTIMUL Organic emulsifier •
CONCENTRATE OPTIPLUS Organic emulsifier •
DRILTAL DD Drilling fluids surfactant • • • • 1-10 OPTITHIN Organic thinner • • 0.25-1
MAYCO WELLCHEM OPTIWET Blend of emulsifying & wetting agents • 0.25-8
MAYCO TREAT Surfactant de-emulsifier • • • • 0.2-0.5 NOV FluidControl
MESSINA TRU-FLUSH Well wash • • 55/100
DRILL-PEN ROP Enhancer/anti-bit ball • • • • 2.5 HME Surface active agent • • • •
HYDRO-WET Mud surfactant • • • • 0.4 TENSION-EZE Drilling mud detergent • • • • 0.1-0.4 Y
KLEEN-WET Low-toxicity oil wetting surfactant • • 0.25-1.9 OLEON N.V.
MESUCO-RIG-CLEAN Industrial detergent As required RADIAGREEN CLO Stimulation additive & mud cake breaker • •
MESUCO-FOAM For mist and foam drilling • • • 0.35-1.0 RADIAGREEN CLW Cased hole cleaner • • • • •
MUDDET Drilling detergent • • • • 0.16-0.32 SPECIAL PRODUCTS
MUD-MUL Oil-in-water emulsifier • • • • 1.0 PRODUCT 2077 Unique corrosion inhibiting oxygen scavenger • • • 1-4
OILWET Oil wetting agent • 0.25-1.9 PRODUCT 6099 High-Temp DMS Shale Dispersent Surfactant • • • • 1-4
POLYFIX Thermal stabilizer for polymers • • • • 1-2 STRATA CONTROL SERVICES, INC.
SURF-ACT Mud surfactant • • • • 2-8 STRATA-COUPLER Liquid coupler for gilsonite, asphalt,etc • • • • 0.01 - 0.03 Y
SURF-ACT-II Mud surfactant • • • • 0.66-1.3
SUN DRILLING PRODUCTS
M-I SWACO
MUL SPERSE Wetting agent and coupler • • • • 0.0001 Y
CLEAN UP Surfactant blend • • • • • • 1-100% N N DRILL CON Surfactant based inhibitor • • • • 1%-3% Y
D-D Drilling detergent • • • • 0.5-6 N N Y
TBC-BRINADD
D-SPERSE Surfactant • 0.25-1 vol%
HYSAL ACTIVATOR Catalyst for polymer hydration • • • 0.5 gal/bbl
DRILFREE Lubricant, antisticking agent • • • • 1-3% Y N
AO-COUPLER Emulsifier
DRIL-KLEEN Low-toxicity detergent • • • • 0.2-1 N N Y
AO-EW Emulsifier/wetting agent
DRIL-KLEEN II Anti bit balling agent • • • • 0.2-0.5 N N
TETRA TECHNOLOGIES, INC.
DRILZONE ROP enhancer • • • 1-2 vol%
DRILZONE L Low-cost anticrete • • • 1-2vol% TDSP II OMD Surfactant wash • •
DRILZONE NS ROP enhancer • • • 1-2vol% TDSP II O-SOL Surfactant wash • • • •
DRILZONE II ROP enhancer • • • 1-2vol% TDSP II O-SOL PLUS Surfactant wash • • • •
ECOGREEN P Primary emulsifier • 2-6 Y N TETRA OMD Surfactant wash • •
ECOGREEN S Secondary emulsifier • 2-6 Y N TETRA O-SOL Surfactant wash • • • •
ECOKLEEN Anticrete for tar applications TETRASOL Surfactant wash • • • •
ENVIROBLEND Salt for ENVIROVERT system • WEATHERFORD INTERNATIONAL LTD.
FAZE-WET Wetting agent for FAZEPRO system • • 8-12 N N ALPHA 6177 Low toxicity. dispersant • • 0.1-0.4
GLYDRIL DG Water-miscible glycol hydrate inhibitor • • • • 3-20% N N ALPHA CLEAN O Casing wash/pipe dope, low toxicity •
HYDRABLOK Deepwater hydrate inhibitor • • • • 5 vol% ALPHA CLEAN W Casing wash, toxicity •
KLEEN UP Surfactant cleaner • • CAT-FOAM Cationic foaming agent • • .02-.2 gal/bbl
LUBE-167 Low-toxicity lubricant • • • • 4-16 Y N Y CWF-311RC Multi-purpose air-foam drilling surfactant • • .02-.2 gal/bbl
M-I 157 Supplemental emulsifier • • 0.5-2 N N CWF-418 All-purpose, oil-tolerant air-drilling surfactant • • .02-.2 gal/bbl
MUD WASH Rig wash 2-10 vol% CWF-419 Oil-tolerant surfactant for high TDS brines • • .02-.2 gal/bbl
NOVAMUL Primary emulsifier and wetting agent • 2-8 N N Y CWF-511 Fresh water air-drilling surfactant • .02-.2 gal/bbl
for synthetic fluids FW-FOAMER Fresh water air-drilling surfactant • .02-.2 gal/bbl
NOVATHIN Thinner for synthetic muds • 0.5-2 N N Y WELL FLOW INTERNATIONAL
NOVAWET Wetting agent for synthetic muds • 1-5 N N Y DIRT MAGNET Alcohol/surfactant blend • • • • • Y
NOVAWET CN Capped wetting agent • HOG WASH Solvent/surfactant blend • • • • •
NOVAWET PLUS Capped wetting agent • POWERWASH Surface cleaner • • • • • •
PARAWET Wetting agent for OBM & SBM • • RINSE-AID Complex surfactant blend • • • • • •
SAFE-BREAK CBF Emulsion preventer for brines • 0.1-0.5% N N RINSE-AID “E” Complex surfactant blend • • • • • • E
SAFE-BREAK ZINC Emulsion preventer for zinc bromide brines • 0.1-0.5% N N THINNERS/DISPERANTS
SAFE-FLOC I Surfactant / flocculant solvent blend • • .01-2.0% N N
AQUALON
SAFE-FLOC II Surfactant / solvent blend • • .01-2.0% N N
SAFE-PEEL Filtercake releasing agent • 1-20 AQU D-3536 Cellulosic dispersant and fluid loss additive • • • • 1-3 Y Y
SAFE-SOLV E Pipe dope pickle solvent • 2-20% Y N ASAP FLUIDS
SAFE-SOLV OM Dispersible solvent for OBMs and SBMs • • 2-20% N N ASAP LIG Caustisized Lignite • • 5 -9
SAFE-SURF E Non-ionic wellbore cleaning agent • • • • • • 2-5 vol% ASAP LIGNITE Powdered Lignite • • 5-9
for OBM and WBM ASAP CR Chrome lignite • • 5-9
SAFE-SURF NS Wash chemical • • 5-20 vol% ASAP K-LIG Potassium lignite • • 7-12
SAFE-SURF O Concentrated surfactant for wellbore clean-up • 2-20% N N ASAP CFD Chrome Free Deflocculant • • • • 5-9
SAFE-SURF O II Displacement wash chemical for WBM • • • • 1-10% N N ASAP HT THIN Polymeric Deflocculant for high temperature • • • • 2-5 •
SAFE-SURF W Surfactant-base detergent • • • • 2-10% N N ASAP THIN-W Polymeric Deflocculant • • • • 0.5- 2
SAFE-SURF WE Non-ionic surfactant blend • • 2-10% N N BAKER HUGHES DRILLING FLUIDS
SAFE-SURF WN Displacement wash chemical for WBM • • • • 2-10% N N ALL-TEMP Water-base deflocculant/rheological stabilizer • • • • 0.5-2 ppb Y
SAFE-T-PICKLE Pipe dope solvent • • • • 100% with special applications in HT environments

www.offshore-mag.com • September 2012  Offshore  71

 Plonor listing available

Plonor listing available

HOCNF classification

HOCNF classification
Passed LC50 test

Passed LC50 test

Synthetic fluid

Synthetic fluid
Saturated salt

usage (Ib/bbI)

Saturated salt

usage (Ib/bbI)
Nondispersed

Nondispersed
concentration

concentration
Fresh water

Fresh water
Dispersed

Dispersed
Oil-based

Oil-based
Normal

Normal
Product Product
name Description name Description
ALL-TEMP XPR Economy water-base deflocculant/ • • • • .25-1 ppb RHEOMATE Zirconium complex based dispersant / HT extender • • • • 0.5-3
rheological stabilizer MESSINA
LIGCO Ground leonardite • • 2-8 ppb Y HI-THIN Mud deflocculant • • • • 0.5-3
LIGCON Ground causticized leonardite • • 2-8 ppb Y HI-THIN-II High performance polymer • • • • 0.5-3
MIL-TEMP Contamination-resistant HPHT rheological • • • • 1-2 ppb Y KLEEN-THIN Low-toxicity oilmud thinner • • 1-2
stabilizer for WBM, > 500°F MESUCO-CL Causticized lignite • • • • 1-8
NEW-THIN Synthetic deflocculant • • • • 0.14 L/m3 Y MESUCO-KL Potassium/lignite • • • • 1-8
UNI-CAL Chrome-modified sodium lignosulfonate • • • 2-6 ppb Y MESUCO-LIG Lignite • • • • 1-8
UNI-CAL CF Chrome-free lignosulfonate • • • • 1-5 ppb Y OILTHIN Oilmud thinner • 1-2
BAROID FLUID SERVICES POLYSPERSE Synthetic deflocculant • • • • 0.1-1.0
ATC All temperature thinner • 1.0-3.0 Y POLYSPERSE-XHT Synthetic deflocculant • • • • 0.1-1.0
BARAFOS Sodium polyphosphate compound • 0.1-1.0 Y POLYTHERM-FX HT drilling polymer • • • 1-6
BARATHIN-PLUS Modified lignosulfonate • • • • 2.0-6.0 Y REDI-THIN Polymeric deflocculant • • • • 0.1-1.0
CARBONOX Leonardite • • • • 2.0-12.0 Y Y Y RHEOTHIN Modified lignosulfonate • • • • 2-6
COLDTROL Cold temperature thinner • 1.0-3.0 Y RHEOTHIN-CF Chrome-free lignosulfonate • • • • 2-6
DEEP-TREAT Wetting agent • • 1.0-6.0 Y RHEOTHIN-HP Polymer modified lignosulfonate • • • • 1-3
ENVIRO-THIN Chrome-free lignosulfonate • • • • 2.0-6.0 Y Y Y THERMO-THIN-S High performance deflocculant • • • • 0.5-1.5
IRON-THIN Iron lignosulfonate • • • • 2.0-6.0 Y THERMO-TROL-50 HT fluid loss and mud thinner • • • • 1-8
LIGNOX PLUS Lignosulfonate thinner for lime muds • 2.0-10.0 THERMO-TROL-X Synergistic polymer conditioner • • • • 2-6
OMC Oil mud conditioner • • .25-1.5 M-I SWACO
OMC 42 Oil mud conditioner • • .25-1.5 Y Y CAUSTILIG Causticized ground lignite • • • 1-15 N N Y
OMC 2 Oil mud conditioner • • 0.1-0.5 Y CALOTHIN HT ENVIROTHERM system Thinner • • • 2-6
OMC 3 Oil mud conditioner • • 0.1-1.0 Y CALOSPERSE ENVIROTHERM system Thinner • • • • 4-16
QUIK-THIN Ferrochrome lignosulfonate • • • 1.0-8.0 Y CALOSPERSE ZR ENVIROTHERM system Thinner • • • • 4-16
QUIK-THIN PLUS Chrome lignosulfonate • • • IDSPERSE XT High temp polymeric dispersant • • • 0-6 Y N
SAPP Sodium acid polyphosphate • • 0.1-0.5 Y Y K-17 Potassium causticized lignite • • • • 1-15 N N Y
THERMA-FLOW 500 High temperature dispersant • • 1-4 vol% Y NOVATHIN Thinner for synthetic muds • 0.5-2 N N Y
THERMA-THIN High temperature deflocculant • • • • 0.1-4.0 Y Y NOVAWET Wetting agent for synthetic muds • 1-5 N N Y
BOYSENBLUE/CELTEC INTERNATIONAL PTS-200 Polymeric temperature stabilizer • • •
BLEN THIN Polymer liquid defloculant • • • • PTS-530 Alkalinity control agent • • • •
CHANDLER ENGINEERING RESINEX High-temperature synthetic resin • • • • 2-6 N N Y
ALPHA THIN Thinner / Dispersant • • .2 -2.0 RESINEX II High-temperature synthetic resin • • • • 2-10 N N Y
ALPHA TEMP Thinner / Dispersant • • .2 -2.0 RHEDUCE Thinner & conditioner for the RHELIANT system • 0.1-0.2
CRODA RHEOCHEK Chrome-free lignosulfonate • • • 1-12
HYPERMER 2296 Asphaltene dispersant • • 1-3% RHEOSPERSE Polymeric high-temperature deflocculant • • • 1-5 N N
HYPERMER 2524 Asphaltene dispersant • • 1-3% SHALE CHEK Shale control & gumbo additive • • • • 5 N N
HYPERMER LP1 Dispersant for barytes, metal oxides, • • 1-3% SPERSENE Chrome lignosulfonate • • • 1-12 N N Y
hydroxides and carbonates SPERSENE CFI Iron lignosulfonate • • • 1-12 N N
KEMELIX 7475X Asphaltene dispersant • • SPERSENE I Ferrochrome lignosulfonate • • • 0.5-8 N N Y
MONAWET 5136 Wetting and dispersing agent • • • • 1-3% SURETHIN Thinner for synthetic RDF systems • 0.5-2 N N Y
DRILLING SPECIALTIES CO. SUREWET Wetting agent for syn. RDF systems • 1-5 N N Y
CF DESCO Chrome free modified tannin • • • • 0.25-6 Y Y TACKLE Sodium polyacrylate • • • 0.1-1 N N Y
DEFLOCCLANT TACKLE DRY Dry sodium polyacrylate • • • 0.1-2 N N
CF DESCO II Chrome free modified tannin • • • • 0.25-6 N Y TANNATHIN Ground lignite • • • • 1-15 N N Y
DEFLOCULANT THI-2000 Hardness indicator •
DESCO Modified tannin • • • • 0.25-6 Y Y THINSMART Organic FCA and rheological additive • • • • 1-6
DEFLOCCULANT VERSATHIN Surfactant thinner for high-solids OBM • 0.5-2 N N
DRILL-THIN THINNER Chrome free modified tannin • • • • 0.25-6 Y Y VERSATHIN HF Version of VERSATHIN made • 0.5-2 N N
DRILLSAFE JANEL with VERSACOAT HF
CARBOX S Polymeric dispersant • • 0.05-.1 XP-20 N Chrome lignite, neutralized • • • • 1-15 N N
MULTICRYL Acrylic polymer • • • • 0.05-.1 XP-20K Potassium causticized chrome lignite • • • • 1-15 N N Y
MULTILIG AF Alu-iron lignite • • • 0.1-2 NEWPARK DRILLING FLUIDS
MULTILIG K Potassium lgnite • • • 0.1-2 CYBERCOAT Surfactant & supplimental emulifier • 0.5-2
ECOFLUIDS FLEXTHIN HTZ High-temperature thinner • • • • 0.5-10
ECOSPERSE Oil mud thinner • • 1-2 ppb NEWEDGE High-grade leonardite • • • • • • 2-10
ECOSULFONATE HT liquid thinner • • • 0.5-2 ppb Y NEWFLOW CF Chrome-free lignosulfanate • • • • 2-5
ECOCFL II Crome free lignosulfonate • • • • 2-8 Y NEWFLOW Ferrochrome lignosulfanate • • • • 2-5
ECOTHIN E Liquid thinner • • • 1-2 ppb Y NEWLIG Lignite 2-10
EMERY OPTITHIN Organic thinner • 0.25-1
TERRADRIL V 408 Wetting agent • • 0.2-2 OPTIWET Blend of emulsifying & wetting agents • 0.25-8
TERRADRIL V 988 OBM thinner • • 0.2-2 NOV FluidControl
GRAIN PROCESSING CORPORATION LIQUI-THIN Polymeric deflocculant • • • • 1-4 Y
CONTROL I-910 Deflocculant, calcium control agent • • • 3-5 Y CHEMSPERSE Chrome lignosulfonate • • 2-6 Y
CONTROL I-920 Deflocculant, calcium control agent • • • 3-5 Y DESCO Modified tannin • • • • 3 Y
CONTROL I-930 Deflocculant, calcium control agent • • • 3-5 Y DRILLTHIN Organic mud thinner • • • • 0.25-3 Y
GUMPRO ECO-SPERSE Modified lignosulfonate • • • • 0.25-5 Y
GEL LIG Caustisized Lignite • • 5 -9 NOV LIG Processed lignite • • • • 6 Y
GEL LIGNITE Powdered Lignite • • 5-9 SAPP Sodium acid pyrophosphate • • 0.1-0.25 Y
GEL CR Chrome lignite • • 5-9 PRIME ECO GROUP INC.
GEL K-LIG Potassium lignite • • 7-12 DTHIN-12 Chrome free thinner • • • • 0.5 - 2 Y
GEL HT THIN Polymeric Deflocculant for high temperature • • • • 2-5 • DTHIN-18 Chrome free thinner for weighted fluids • • • • 3-6 Y
GEL THIN Polymeric Deflocculant • • • • 0.5- 2 SPECIAL PRODUCTS
KELCO OIL FIELD GROUP PRODUCT 63 Wetting agent • • 1-4
CELPOL ESL Extreme low visc PAC • • • • 0.25-2 Y PRODUCT 2075 Wetting agent • • 2-6
KEMTRON TECHNOLOGIES PRODUCT 6099 High-temp DMS shale dispersent surfactant • • • • 1-4
KEM-THIN Anionic polyacrylate, liquid • • • • 0.25 to 3.0 TETRA TECHNOLOGIES, INC.
KEM-THIN 5A Anionic polyacrylate, powder • • • • 0.05 to 2.5 FERROBAN Organic iron reducer and sequestrant • •
LAMBERTI SPA PAYZONE NE 200 Emulsion preventor • •
EMULAM ASB Super wetting agent for OBM • • 0.5-3 PAYZONE NE 300 Emulsion preventor • •
EMULAM HP120 High efficiency thinner/dispersant for OBM • • 0.5-3 PAYZONE 1320 Penetrant, wetting agent • • •
LAMSPERSE 100 Liquid polyacrylate based, • • • 0.2-3 Y TURBO-CHEM INTERNATIONAL
synthetic thinner - chrome free E Z THIN Surfactant blend to maintain pumpability • • • • • • 5.6 lbs/bbl Y
LAMSPERSE 300 Liquid calcium tolerant synthetic copolymer for HT • • • 0.2-2 Y & fluidity of E Z Squeeze
LAMSPERSE TH II Chrome free powder thinner for HT • • • 0.2-3 WEATHERFORD INTERNATIONAL LTD.
RHEOMATE Liquid zirconium complex, • • • .05-5 Y ALPHA 6450 Oil mud thinner • 0.5-3
thinner / stabilizer for HT conditions WELL FLOW INTERNATIONAL
LAMBERTI USA RINSE-AID Complex surfactant blend • • • • • •
EMULAM TH Thinner / dispersant for OBM • • 0.5-3 RINSE-AID “E” Complex surfactant blend • • • • • • E
LAMSPERSE TH II Powder, Chome free modified • • • • 0.2-3 WEIGHTING AGENTS
tannin based dispersant
LAMSPERSE 200 Liquid, synthetic polymer, HT dispersant • • • • 0.5-3

72  Offshore  September 2012 • www.offshore-mag.com

 Plonor listing available

Plonor listing available

HOCNF classification

HOCNF classification
Passed LC50 test

Passed LC50 test

Synthetic fluid

Synthetic fluid
Saturated salt

usage (Ib/bbI)

Saturated salt

usage (Ib/bbI)
Nondispersed

Nondispersed
concentration

concentration
Fresh water

Fresh water
Dispersed

Dispersed
Oil-based

Oil-based
Normal

Normal
Product Product
name Description name Description
ASAP FLUIDS NOV BAR Barite • • • • • • Y
ASAP CARB Ground Lime Stone • • • • • • As per Req Y NOV CARB C Calcium carbonate • • • • As needed
ASAP BAR Barytes • • • • • • As per Req Y NOV CARB F Calcium carbonate • • • • As needed
BAKER HUGHES DRILLING FLUIDS NOV CARB M Calcium carbonate • • • • As needed
AMMONIUM Solid salt for NH4Cl fluids to 9 ppg • • As needed E Y POTASSIUM Salt • • As needed
CHLORIDE CHLORIDE
CALCIUM BROMIDE Solid salt for 15.3 ppg • As needed E Y SODIUM BROMIDE Salt • • As needed
CALCIUM CHLORIDE Solid salt for 11.6 ppg • As needed E Y SODIUM CHLORIDE Salt • • As needed
DEEP SWEEP Coarse ground barite to improve hole cleaning • • • • • • SPECIAL PRODUCTS
DENSIMIX API Hematite • • • • • • As Required
HEMATITE Iron oxide • • • • • • As needed E Y STRATA CONTROL SERVICES, INC.
HYCAL I Calcium chloride solution to 11.6 ppg • As needed E Y STRATA-COUPLER Coupler for gilsonite, asphalt and oil • • • • Y
HYCAL II Calcium chloride/calcium bromide • As needed E Y TBC-BRINADD
solution to 15.1 ppg
ULTRACARB 2 Sized calcium carbonate • • • 10-50
HYCAL III Calcium chloride/calcium bromide/ • As needed B
zinc-bromide solution to 19.2 ppg ULTRACARB 5 Sized calcium carbonate • • • 10-50
MIL-BAR Barite meeting API specifications • • • • • • Y ULTRACARB 12 Sized calcium carbonate • • • 10-30
MIL-BAR 410 Barite with 4.1 specific gravity • • • • • • Y ULTRACARB 20 Sized calcium carbonate • • • 10-50
MIL-BAR UF Ultra fine grind barite • • • • • • As needed ULTRACARB 30 Sized calcium carbonate • • • 10-50
POTASSIUM Solid salt for NoCal fluids to 9.7 ppg • As needed E Y ULTRASAL 5 Sized sodium chloride • • • 10-50
CHLORIDE ULTRASAL 10 Sized sodium chloride • • • 10-50
POTASSIUM FORMATE Dry KCOOH for weight up to 13.1 ppg • E Y ULTRASAL 20 Sized sodium chloride • • • 10-50
SODIUM BROMIDE Powder for NoCal fluids to 12.7 • As needed E Y ULTRASAL 30 Sized sodium chloride • • • 10-50
SODIUM CHLORIDE Solid salt for fluids to 10 ppg • As needed E Y TETRA TECHNOLOGIES, INC.
SODIUM FORMATE Dry NaCOOH for weight up to 11 ppg • E Y BARITE Insoluble weighting agent
W.O. 30 Sized, ground calcium carbonate • • • • • • Y CABR2 Calcium bromide, 95% • •
(Multiple grind sizes available) EXPRESS, 94% Calcium chloride, 94% • •
BAROID FLUID SERVICES KCL Potassium chloride, 99% • •
BARACARB 5, 25, Sized calcium carbonate • • • • • • 5.0-60.0 Y Y Y NABR Sodium bromide, 97% • •
50,150, 600 NACL Drillers’ Salt
BARAPLUG Sized salt • • As needed Y Y Y NACL Sodium chloride evaporated salt • •
20, 50, 6/300 TETRA SS COARSE Size controlled, coarse NaCl • • • Y
BARAWEIGHT Iron carbonate powder • • • • • • As needed Y TETRA SS FINE Select grind, fine grind NaCl • • • Y
BARODENSE Hematite • • • • • • As needed Y TETRA SS MEDIUM Size controlled, med size NaCl • • • Y
BAROID Barite • • • • • • As needed Y Y Y TETRACARB COARSE Size controlled, coarse CaCO3 • • • • • • Y
BAROID 41 4.1 specific gravity barite • • • • • • As needed Y Y Y TETRACARB FINE Select grind, fine CaCO3 • • • • • • Y
BAROID F10 10 micron average diameter barite Y Y Y TETRACARB FLAKE Sized calcium carbonate
HEMATITE Iron oxide • • • • • • As needed Y TETRACARB MEDIUM Size controlled, medium CaCO3 • • • • • • Y
SWEEP-WATE Selectively sized barite • • • • • • As needed Y Y Y CALCIUM Stock fluid • •
BOYSENBLUE/CELTEC INTERNATIONAL CHLORIDE 11.6 ppg
BLEN CARB Sized calcium carbonate • • • • • • Y CALCIUM Stock fluid • •
CABOT SPECIALTY FLUIDS BROMIDE 14.2 ppg
ZNBR2/CABR2 Stock fluid • •
CESIUM ACETATE Density to 2.3 sg (19.2 ppg) • •
19.2 SOLUTION
CESIUM FORMATE Density to 2.3 sg (19.2 ppg) • • E N
ZNBR2/CABR2 Stock fluid • •
CESIUM FORMATE/ Density to 2.42 sg (20.18 ppg) • • 20.5 SOLUTION
ACETATE BLEND
WEATHERFORD INTERNATIONAL LTD.
MIXED FORMATES Densities from 1 sg to 2.3 sg • E Y
CLEARFORM K Potassium formate solution • • • • • E
POTASSIUM FORMATE Density to 1.57 sg (13 ppg) • E Y N
CLEARFORM S Sodium formate dry powder • • • • • E
SODIUM FORMATE Density to 1.3 sg (10.8 ppg) • E Y Y
DRILLSAFE JANEL
BARITE OCMA grade • • • • •
Footnotes
DRILLWATE Calcium carbonate, all grades • • • • •
PLONOR status only given for materials registered for use in North Sea
HI-WATE Extreme density weight material • • • • • 150 Y
IRONOXIDE Weighting agent H2S remover • • • • •
KLEEN-BAR Acid soluble weight agent • • As needed
KLEEN-BLOCK Acid soluble LCM • • 10-50
KLEEN-BLOCK-X Sized carbonate LCM • • 10-50
KLEEN-WATE Completion brines (calcium, zinc) • • As needed
MARITE High density weight material • • • • • 150 Y
MESUCO-BAR API Barite • • • • • 150 Y
SOLUBLE-WATE Acid soluble weight material • • • • • 150 Y
TEMP-WATE Coarse grind barite • • • • • 150 Y
ELKEM SILICON MATERIALS
MICROMAX Microfine weighting agent (Mn3O4) • • • • • • As needed Y Y Y
GUMPRO
GEL CARB Ground Lime Stone • • • • • • As per Req Y
GEL BAR Barytes • • • • • • As per Req Y
MAYCO WELLCHEM
MAYCO CALWATE Weighing agent sized calcium • • • • • •
carbonate, acid soluble
MESSINA
HI-WATE Extreme density weight material • • • • • • As required
MARITE API high density weight material • • • • • • As required
MESUCO-BAR API grade barite • • • • • • As required
SOLUBLE-WATE Acid-soluble weight material • • • • As required
TEMP-WATE Coarse-grind barite • • • • • • As required
M-I SWACO
FER-OX API hematite • • • • • • 1-500 Y Y Y
FLO-WATE Sized salt • 40-60 N N
LO-WATE Sized ground limestone • • • • • • 10-40 N Y
M-I BAR API barite • • • • • • 1-600 Y Y Y
M-I WATE 4.1 sg barite • • • • • • 1-600 N N
SAFE-CARB Sized ground marble • • • • • • 10-50 Y N
WARP Micron-sized weighting agent • • • • • •
NEWPARK DRILLING FLUIDS
NEWBAR Barite • • • • • •
NEWCARB Sized calcium carbonate • • • • • •
NOV FluidControl
CALCIUM BROMIDE Salt • • As needed
CALCIUM CHLORIDE Salt • • As needed
HEMATITE Hematite • • • • • • Y

www.offshore-mag.com • September 2012  Offshore  73

 name
Product
Description

Dispersed
Nondispersed
Saturated salt
Fresh water

74  Offshore  September 2012 • www.offshore-mag.com

Oil-based
Synthetic fluid
Normal
concentration
usage (Ib/bbI)
HOCNF classification
Plonor listing available
Passed LC50 test
name
Product
Description

Dispersed
Nondispersed
Saturated salt
Fresh water
Oil-based
Synthetic fluid
Normal
concentration
usage (Ib/bbI)
HOCNF classification
Plonor listing available
Passed LC50 test
 name
Product
Description

Dispersed
Nondispersed
Saturated salt
Fresh water
Oil-based
Synthetic fluid
Normal
concentration
usage (Ib/bbI)
HOCNF classification
Plonor listing available
Passed LC50 test
name
Product
Description

Dispersed
Nondispersed
Saturated salt
Fresh water
Oil-based
Synthetic fluid
Normal
concentration
usage (Ib/bbI)
HOCNF classification
Plonor listing available
Passed LC50 test

www.offshore-mag.com • September 2012  Offshore  75