Scribd
Upload
27 views

Assignment 2: Instrumental Drawing

This document contains instructions and diagrams for Assignment 2 of an instrumental drawing course. It includes 4 figures showing geometric constructions with labeled radii and dimensions. Figure 1 shows two circles with radii R1=50mm and R2=30mm. Figure 2 shows two overlapping circles with radii R1=45mm and R1=50mm separated by 5mm. Figure 3 shows two squares with sides of 110mm separated by 5mm and 10mm. Figure 4 shows four overlapping circles with labeled radii R1=50mm, R2=35mm, R3=15mm, and R4=35mm.

Uploaded by

qweqwe
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
27 views

Assignment 2: Instrumental Drawing

This document contains instructions and diagrams for Assignment 2 of an instrumental drawing course. It includes 4 figures showing geometric constructions with labeled radii and dimensions. Figure 1 shows two circles with radii R1=50mm and R2=30mm. Figure 2 shows two overlapping circles with radii R1=45mm and R1=50mm separated by 5mm. Figure 3 shows two squares with sides of 110mm separated by 5mm and 10mm. Figure 4 shows four overlapping circles with labeled radii R1=50mm, R2=35mm, R3=15mm, and R4=35mm.

Uploaded by

qweqwe
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 6

ASSIGNMENT 2

INSTRUMENTAL DRAWING
FIGURE 1

R1 = 50 mm

R2 = 30 mm

COURSE & SECT. NAME: ASSIGNMENT NO: 2

SEAT NO. INSTRUCTOR: DATE: GRADE


Instrumental Drawing

Step 6

A . . A

. .
. .
C C

B B

Use Compass to connect Points A to B, having Point C as the


Center Point.
Use French Curve to Connect Points A to A and B to B.

Lettering Instrumental Drawing Geometrical Construction Working Drawing Isometric Drawing


FIGURE 2

R1 = 45 mm
R1 = 50 mm

5 mm

COURSE & SECT. NAME: ASSIGNMENT NO: 2

SEAT NO. INSTRUCTOR: DATE: GRADE


FIGURE 3
5 mm 10 mm

110 mm
110 mm

COURSE & SECT. NAME: ASSIGNMENT NO: 2

SEAT NO. INSTRUCTOR: DATE: GRADE


FIGURE 4

R2 = 35 mm
R1 = 50 mm
R3 = 15 mm

R4 = 35 mm

COURSE & SECT. NAME: ASSIGNMENT NO: 2

SEAT NO. INSTRUCTOR: DATE: GRADE

You might also like