Anna University Exams April / May 2019 – Regulation 2017

Rejinpaul.com Unique Important Questions – 4th Semester BE/BTECH

MA8452 Statistics and Numerical Methods
UNIT 1 TESTING OF HYPOTHESIS
PART-B TOPICS PART-A TOPICS
Application ,uses ,properties, condition of
1
Problem based on t-distribution all distribution
2
Problem based on chi-square-distribution Definitions of all terms
3
Problem based on F-distribution
4
Goodness of fit –Attributes-contingency table
UNIT 2 DESIGN OF EXPERIMENTS
PART-B TOPICS PART-A TOPICS
1 Latin square design Definition of CRD,RBD,LSD
Advantage and Disadvantage of
2 22 factorial design CRD,RBD,LSD
3 Completely randomized design
4 Randomized block design

UNIT 3 SOLUTION OF EQUATIONS AND EIGENVALUE PROBLEMS

PART-B TOPICS PART-A TOPICS
Differences between iteration and
1 Newton Raphson method elimination
Eigen values of a matrix by Power method and Differences between gauss Jacobi and
2 Jacobi methods seidel

3 Iterative methods of Gauss Jacobi and Gauss Seidel

4 Gauss elimination method
UNIT 4 INTERPOLATION, NUMERICAL DIFFERENTIATION AND NUMERICAL INTEGRATION
PART-B TOPICS PART-A TOPICS
Evaluation of double integrals by Trapezoidal and
1 Simpson's 1/3 rules All model formulas
Numerical integration using Trapezoidal, Simpson's
2 1/3 rule Error and order of all methods
Newton's forward and backward difference
3 formulae for differentiation
4 Lagrange's interpolation
5 Newton's divided difference interpolation
Newton's forward and backward difference
6 formulae

UNIT 5 NUMERICAL SOLUTION OF ORDINARY DIFFERENTIAL EQUATIONS

PART-B TOPICS PART-A TOPICS
Milne's predictor corrector methods for solving first
1 order equations. All model formulas
Fourth order Runge-Kutta method for solving first
2 order equations
3 Taylor's series method
4 Euler's method - Modified Euler's method
Finite difference methods for solving second order
5 equations
 UNIT 1 TESTING OF HYPOTHESIS
1.Two independent samples are chosen from two schools A and B and a common test is given in a
subject. The scores of the students are as follows:
S chool A : 76 68 70 43 94 68 33
S chool B : 40 48 92 85 70 76 68 22
Is the difference between the sample means significant?
2. Two independent samples of 8 and 7 items respectively had the following values of the variables:
Sample 1: 39 41 43 41 45 39 42 44
Sample 2: 40 42 40 44 39 38 40
Do the estimates of the population variance differ significantly?
3. A survey of 800 families with 4 children each revealed the following distribution:
No. of boys : 0 1 2 3 4
No.of girls : 4 3 2 1 0
No. of families: 32 178 290 236 64
Is this result consistent with the hypothesis that the male and female births are equally
probable? (Test the hypothesis at 5% level).
4. Two researchers A and B adopted different techniques while rating the students level.
Can you say that the techniques adopted by them are significant?
Researchers Below average Average Above average Genius
A 40 33 25 2
B 86 60 44 10
5. The mean value of a random sample of 60 items was found to be 145, with an SD of 40. Find the
95% confidence limits for the population mean. What size of the sample is required to estimate
the population mean within 5 of its actual value with 95% or more confidence, using the sample
mean?

UNIT 2 DESIGN OF EXPERIMENTS

1. Analyze the variance in the Latin square of yields ( in kgs) paddy where P,Q,R,S denote the different
methods of cultivation.
S122 P121 R123 Q122
Q124 R123 P122 S125
P120 Q119 S120 R121
R122 S123 Q121 P122
Examine whether the different methods of cultivation have given significantly different
yields.
2. An experiment was designed to study the performance of 4 different detergents for
cleaning fuel injectors. The following cleanness readings were obtained with specially
designed equipment for 12 tanks of gas distributed over 3 different models of engines.
Engine 1 Engine 2 Engine 3
Detergent A: 45 43 51
Detergent B: 47 46 52
Detergent C: 48 50 55
Detergent D: 42 37 49
Perform the ANOVA and test at 0.01 level of significance whether there are differences
in the detergents or in the engines.
3. As part of the investigation of the collapse of the roof of a building, a testing laboratory is given all
 the available bolts that connected the steel structure at three different positions on the roof.
The forces required to shear each of these bolts (coded values) are as follows.
Position 1: 90 82 79 98 83 91
Position 2: 105 89 93 104 89 95 86
Position 3: 83 90 80 94
Perform an analysis of variance to test at the 0.05 level of significance whether the
differences among the sample means at the three positions are significant.
UNIT 3 SOLUTION OF EQUATIONS AND EIGENVALUE PROBLEMS
1..Solve the system of equations using Gauss Seidel iterative methods.20x – y – 2z = 17, 3x + 20y – z = -18, 2x –
3y +20z = 25.
 1 3  1
2.Find the largest eigen values and its corresponding vector of the matrix  3 2 4  by power method.
 
 1 4 10 
3. Using Newton-Raphson’s method, solve xlog10x = 1.2
4.Solve the following equations by Jacobi’s iteration method x + y + z = 9, 2x – 3y + 4z = 13, 3x + 4y + 5z = 40.

UNIT 4 INTERPOLATION, NUMERICAL DIFFERENTIATION AND NUMERICAL INTEGRATION

1. The following data are taken from the steam table:

Temp0 c : 140 150 160 170 180
Pressure : 3.685 4.854 6.502 8.076 10.225
Find the pressure at temperature t = 1420 and at t = 1750
2. Using Lagranges interpolation formula find y(10) given that y(5) = 12, y(6) = 13,y(9) = 14 and y(11) = 16.
3. Use Newton’s divided difference formula find u(3) given u(1)=-26, u(2)=1, u(4)=256, and u(6)=844
4.The following data gives the velocity of a particle for 20 seconds at an interval of five seconds. Find initial
acceleration using the data given below
Time(secs) : 0 5 10 15 20
Velocity(m/sec): 0 3 14 69 228

2 2
dxdy
5. Evaluate  x
1 1
2
 y2
numerically with h = 0.2 along the x direction and k = 0.25 along y direction by

Trapezoidal Rule

2
(ii) Simpson’s 1 – 3rd rule
6. Evaluate

0
sin x dx by (i) Trapeziodal Rule

dxdy
7.Evaluate   1 x  y by Simpson’s 1/3 rule with x  y = 0.5 where 0<x,y<1.

UNIT 5 NUMERICAL SOLUTION OF ORDINARY DIFFERENTIAL EQUATIONS

dy y 2  x 2
th
1.Using R.K. method of 4 order, solve  , with y (0)  1 at x  0.2
dx y 2  x 2
2.Using Taylor series method, find y(1.1) and y(1.2) correct to four decimal places given
dy
 xy1 / 3 and y (1)  1
dx
dy
3.Determine the value of y(0.4) using Milne’s method given  xy  y 2 , y (0)  1 , use Taylors series to get the
dx
value of y at x = 0.1, Euler’s method for y at x = 0.2 and RK 4th order method for y at x=0.3.
dy
4. Using Euler’s method find the solution of the IVP  log(x  y ), y (0)  2 at x  0.2 taking h  0.2 .
dx

5. Using the finite differences methods find y(0.25),y(0.5),y(0.75) satisfying the differential equation 𝒚′′ + 𝒚 = 𝒙,
y(0)=0,y(1)=2
Questions Are Expected for University Exams This May or may Not Be Asked for Exams
Please do not Copy (or) Republish This Questions, Students if You Find the Same Questions in Other
Sources, Kindly report us to [email protected]