Scribd
Upload
773 views1 page

Certene L.A. LLBF-122D (Sustituto 11PG4) Actualizada

LLBF-122D is an ethylene copolymer resin designed for producing high performance blown films for general purpose packaging. It contains over 5% butene comonomer and features easy processability, strong films, and a wide heat sealing temperature range. Its major applications include produce and garment bags. The resin complies with FDA food contact regulations and international standards.

Uploaded by

diana
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
773 views1 page

Certene L.A. LLBF-122D (Sustituto 11PG4) Actualizada

LLBF-122D is an ethylene copolymer resin designed for producing high performance blown films for general purpose packaging. It contains over 5% butene comonomer and features easy processability, strong films, and a wide heat sealing temperature range. Its major applications include produce and garment bags. The resin complies with FDA food contact regulations and international standards.

Uploaded by

diana
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Technical Data Sheet

LLBF-122D
Ethylene Copolymer
LLBF-122D is a certified prime ethylene copolymer resin Butene-comonomer,greater than 5 wt% specially
designed for production of high performance Blown films for general purpose packaging. LLBF-122D features
excellent combination of easy processability with very good film strength as well as wide heat sealing temperature range.
LLBF-122D major applications include garment bags, produce bags and liners. Maximum recommended film
drawdown is 0.5 mil. LLBF-122D contains medium slip and high antiblock. LLBF-122D complies with FDA
regulation 21CFR 117.1520 (c) 3.1 (a) and with most international regulations concerning the use of Polyethylene in
contact with food articles.

Typical Properties

PROPERTIES* ASTM UNIT NOMINAL


TEST ENGLISH (METRIC) VALUES

RESIN

Melt Index D 1238E gr./10 min 1.0


3
Density D 1505 gr./cm 0.922

FILM**

Haze D 1003 % 7.5


Gloss D 2457 @45° 65
1
Tensile Modulus D 882 psi x 1000 (MPa) 31/36² (215/250)
Yield D 882 psi x 1000 (MPa) 1.8/1.7² (12/11)
Break D 882 psi x 1000 (MPa) 6.5/4.3² (45/30)
Ult. Elongation D 882 % 650/990²
Elmendorf Tear D 1922 gr. 80/550²
Dart Impact, F50 D 1709A gr. 85

TYPICAL VALUE OF PROPERTIES NOT TO BE CONSTRUED AS SPECIFICATIONS.


* - Test specimens from compression molded plaque according to ASTM D 1928 Procedure C.
o o
**- 1.0 mils (25µ) film, melt temperature 395-430 F (200-220 C), blow-up-ratio 2.5 :1.
1 - 1% secant.
2 - MD/TD.
THIS PRODUCT DATA SHEET EFFECTIVE OCTOBER 2003 SUPERSEDES ALL DATA PREVIOUSLY PUBLISHED
The technical information, suggested uses and applications presented are made without charge and are believed to be reliable;
however, H. Muehlstein & Co., Inc. disclaims responsibility for results of use of this information. H. MUEHLSTEIN & CO. INC. MAKES
NO WARRANTIES, EITHER EXPRESS OR IMPLIED, CONCERNING OUR MATERIALS, INCLUDING ANY WARRANTIES OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR USE. H. Muehlstein & Co. expressly disclaims any statements or
suggestions as being inducement. All users should rely upon their own test in determining suitability.

THE GLOBAL LEADER IN POLYMER DISTRIBUTION

WORLD HEADQUARTERS: 800 CONNECTICUT AVENUE, NORWALK CT. USA 06854-1631


PHONE: (203) 855-6000 - FAX: (203) 855-6222 - e-MAIL: [email protected]

You might also like