TAIWAN SAVCH ELECTRIC

SAVCH PLC
Savch Website: www.savch.net E-mail: [email protected]
Programmable Logic Controller
Alibaba Website：www.savch.com.cn Alibaba Store：http://sanqidq.1688.com

520006605140 V1.0 2017-07-14

Ｓａｖｃｈ
Ｓａｖｃｈ
Ｓａｖｃｈ
Ｓａｖｃｈ

ＳＡＶＣＨ ＳＡＶＣＨ
 Innovate for more,Win forever

Cloud Platform
Cloud is a cross-platform IOT cloud platform. It supports PC, iPad, Android, IOS and other terminals. You
can visit on-site equipments from a thousand miles away, and realize the remote monitoring and maintaining
for HMI and PLC. It supports remote programming,firmware upgrades,monitoring and diagnosis etc.
Cloud Network Diagram
Cloud provides security mechanisms for communication. It is secured by the encryption mechanism of
128-bit SSL,which ensures the stable and safe data transfer. It also uses A-key and B-Key protection mechanism
to enable secure remote access to the devices.

Service Hotline： Service Hotline：

 Innovate for more,Win forever

SavchSoft_PLC Programming Software

SAVCH PLC Introduction SavchSoft_PLC is a programming software which is in accordance with IEC 61131-3 standard. It can be used for SAVCH PLC
programming. Furthermore, it supports 100% built-in simulator and three kinds of programming languages (LD-Ladder Diagram, FBD-
SAVCH PLC is a versatile high-performance programmable logic controller, which is widely used in plastics, packaging, textiles, food, Function Block Diagram and IL-Instruction List). It can run on the systems of Windows 98, Windows 200X, Windows XP and the later
medical, pharmaceutical, environmental, municipal, printing, building materials, elevators, central air conditioning, numerical control Windows version.
TEST
output, analog input, analog output, high-speed counter, high-speed pulse output channels, power supply, communication ports, etc.), it TEST
TEST

SAVCH PLC Features

1)Ethernet + 6)The firmware upgrade function

Host PLC and remote modules support Ethernet commun-
Taking the lead in the function of realizing firmware upgrade
ication, host PLC support Ethernet port and 5 serial RS232/
in a small programmable controller You can upgrade the Instruction List
RS485 communication ports working simultaneously, Ladder Diagram
system firmware through the firmware upgrade function for Function Block DIagram
support N:N network type, support remote programming,
free,previously can also have latest features from SAVCH com-
debugging,monitoring and data exchange. Easy to work with
other PLC modules, HMI and PC via Ethernet port.
pany. SavchSoft_PLC Features
2)Rich network communication function 7)Supporting for multiple communication protocols 1)Cloud Programming: 6)Interpolation simulator:
CPU host PLC supports built-in Ethernet port and 2 serial Supports Modbus TCP, Modbus RTU/ASCII protocol, free Support Cloud platform, can use Cloud to do remote prog- Track and draw the trajectory generated from motion control
RS232/RS485 communication ports, it is expandable to 1 communication protocol and savch company's,SAVCH ramming for SAVCH PLC as upload/download, firmware instructions such as the linear interpolation, circular interpola-
Ethernet port and 5 serial RS232/RS485 ports, each port can TCP,Savchbus high-speed communication protocols. No upgrading,self-diagnosis, monitoring and debugging.Easy for tion, listing parameters of the pulse output channel of the motive
be programmed and connects to network,and all of them can matter which kind of communication protocols, it only needs remote connection and real-time data monitor-ing of the site. plane and corresponding to each axis, display the current posi-
be used as masters or slaves. It support 1:N, N:1, N:N a simple communication instruction when dealing withcomplex Also you can do local programming through a HMI which supp- tion of the channel, the mechanical home position, output mode,
networking and a variety of human-machine interface,and communication functions.You will no longer troubled by the orts built-in Coud engine. you can set shaft length, unit pulses.
configuration software.It can also connect to network with any problems as communication sport’s conflicts, sending&
third-party devices whice have communication capabilities receiving control, communications interrupt handling issues 2)Communications simulator: 7)Modular project structure:
(such as inverters instruments,barcode readers,ect..) and you can use a variety of protocols to exchange data easily
by mixing them up in the program. It is used to the debug communication instruction simulation Create 31 blocks total (main program, sub program, interrupt
tools. It can be manually input simulately response mess-
3)High-speed pulse frequency measurement: program) and chose any programming language to program.
age returned from salve, or you can use the computer's serial
8)High-speed pulse counting function: port to communicate with salve really, Simulate the process
The execution order of block can be adjusted at random.
Supports 16-channel (200KHz) high-speed pulse frequency Each block can be imported and exported independently and
measurement, support the ways of time or pulses to measure Supports 8-channels duplex high-speed (200KHz) pulse that PLC executes communication instruction really and pro- has the same password protection of program projects. So we
the frequency counting, and 7 kinds of counting modes (pulse / direction 1 cess the return data from the salve. can fully realize the modular programming and program reuse
octave, pulse / direction 2 octave, forward / reverse pulse 1 dreams.
4)Motion control function: octave, forward / reverse pulse 2 octave, A/ B phase pulse 1 3)PLC executable file generation
octave, A / B phase pulse 2 octave, A / B phase pulse 4
Each model support 8-channel (200KHz) motion control, sup- octave), and three kinds of comparisons (single-stage PLC program can be generated to executable file which is Remote Engine Built-in PLC
ports arbitrary 2-channel linear interpolation,circular interpolation, comparision,the absolute mode comparision,the relative mode released and executed independently. So you do not need to Programming Cloud Engine

support follower pulse output, absolute address, relative add- comparision),supports 48 segments comparision fixedvalue, send the PLC program to the user,it can be very easy,very safe
OR
ress, backlash compensation, original point return,defintion of with selg-leaming functon. to put the PLC excutable file to the user to download,but do not SAVCH Cloud SAVCH HMI SCADA

electrical origin. worry the user would can see the program content.
9)High-speed pulse output: 4)Instruction using table:
5)PID control function: Remote PC
SAVCH
PLC #1
SAVCH SAVCH
PLC #1
SAVCH
PLC #N
Each model support 8-channel (200KHz) motioncontrol,supp- PLC #N
orts arbitrary 2-channel linear interpolation,circular interpola- Provides multiple instruction tables. Use these tables
Support 32 channels increment PID, support 32 channels auto
can reduce the amount of programs, saving program space, Remote Programming
tuning PID and 32 channels fuzzy temperature control, work tion, support follower pulse output, absolute address, relative
address, backlash compensation, original point return,defintion such as initialization data. Each table can be imported and ex-
with TTC temperature curve control, VC valve control and other
of electrical origin. ported independently and has the same password protection
instructions to easily control complicated objects in the industry Remote Engine Built-in PLC
of program project.
site. Programming Cloud Engine

SAVCH PLC with 16 encoders SAVCH PLC with 16 servos 5)Internal PLC simulator: SAVCH HMI OR SCADA

Realizing the PLC program run in the PLC program in the

1#encoder 2#encoder 3#encoder 16#encoder simulation without online to check the program execution is
Remote PC SAVCH SAVCH SAVCH SAVCH
correct or not. It can reduce on-site commissioning time PLC #1 PLC #N PLC #1 PLC #N
4~15#encoder greatly, reduce debugging diffcult and improve debugging
effciency. Local Programming
8 channels 200KHz A/B
8 channels 200KHz A/B phase pulse output
phase pulse input
16 points 200KHz single
16 points 200KHz pulse pulse output
freequency measurement

4~15#servo 16#servo
1#servo 2#servo 3#servo

PLC Simulator Real-time curve

Service Hotline： Service Hotline：

 Innovate for more,Win forever

Description of PLC model S Series - Standard PLC MPU (-e : Built-in Ethernet port)

Power Spec. Model Pulse Pulse Max Dimension

Communication
Input Output Exp.
RS232 + RS485,
16 Relay
Product Max 5 ports
Ethernet port 2 Channels
Product Series Built-in Ethernet port 16 Transistor A/B phase RS232 + RS485,
E（Economic PLC MPU） Empty: Without Ethernet port NPN (4 points) Max 5 ports
S（Standard PLC MPU） 200KHz
H（High performance PLC MPU） Output type 2 Channels RS232 + RS485,
R（Relay） SMC-S48MR-e SMC-S48MR 28 20 Relay
M（Motion control PLC MPU） A/B phase Max 5 ports
X（Digital extend pure input） T（Transistor） (4 points) 2 Channels
Y（Digital extend pure output） N（No digital I/O） 20 Transistor 200KHz A/B phase RS232 + RS485,
C（Digital extend input / output combination type） SMC-S48MT-e SMC-S48MT 28 NPN (4 points) Max 5 ports
AD（Analog expansion_AD input） Module type 200KHz
DA（Analog expansion_DA output）
M（Main） RS232 + RS485,
AN（Analog expansion_AD/DA combination） 24 Relay
E（Extension module） Max 5 ports
TR（Analog expansion_Thermal resistance input）
TC（Analog expansion_Thermocouple input） 2 Channels
I/O point 24 Transistor A/B phase RS232 + RS485,
Built-IO:16-point,24-point,32-point,48-point, NPN (4 points) Max 5 ports
60-point are optional 200KHz

H Series - High Performance PLC MPU (-e : Built-in Ethernet port)

Products List
Power Spec. Model Pulse Pulse Max Dimension
E Series - Economic PLC MPU (-e : Built-in Ethernet port) Input Output
Communication
Exp.
Specification RS232 + RS485,
Dimension 20 Relay
Power Spec. Model 4 Channels Max 5 ports
Communication Max Exp. A/B phase 4 Channels
N/A 20 Transistor (8 points) A/B phase RS232 + RS485,
SMC-E10MR-e SMC-E10MR 4 Relay RS232 + RS485
NPN 200KHz (8 points) Max 5 ports
SMC-E10MT-e SMC-E10MT 4 Transistor NPN RS232 + RS485 N/A 200KHz

8 Relay N/A M Series - Motion Control PLC MPU (-e : Built-in Ethernet port )
Support line interpolation, arc interpolation and follow-up pulse output;Support absolute address and relative address;
8 Transistor NPN N/A
Support reverse clearance compensation;Support for electrical origin redefinition, etc
SMC-E24MR-e SMC-E24MR 8 Relay N/A

SMC-E24MT-e SMC-E24MT 8 Transistor NPN N/A Power Spec. Model Pulse Pulse Max Dimension
Communication
16 Relay N/A Input Output Exp.
6 Channels 6 Channels
16 Transistor NPN N/A 12 Transistor A/B phase A/B phase RS232 + RS485,
NPN (12 points) (12 points) Max 5 ports
SMC-E48MR-e SMC-E48MR 28 20 Relay N/A 200KHz 200KHz
8 Channels 8 Channels
SMC-E48MR-e SMC-E48MR 28 20 Transistor NPN N/A A/B phase A/B phase RS232 + RS485,
24 Transistor
NPN (16 points) (16 points) Max 5 ports
24 Relay N/A
200KHz 200KHz

24 Transistor NPN N/A

Digital I/O Expansion Modules (-e : Built-in Ethernet port)
S Series - Standard PLC MPU (-e : Built-in Ethernet port)
Power Spec. Model Dimension
Communication
Power Spec. Model Pulse Pulse Max Dimension
Communication
Input Output Exp.
8 Relay
RS232 + RS485,
8 Relay
Max 5 ports 8 Transistor NPN
2 Channels
8 Transistor A/B phase RS232 + RS485, 8 Relay RS485, supports remote function
PNP 2 Channels (4 points) Max 5 ports
A/B phase 200KHz 8 Transistor NPN RS485, supports remote function
(4 points) RS232 + RS485,
SMC-S24MR-e SMC-S24MR 8 Relay 200KHz 12 Relay RS485, supports remote function
Max 5 ports
2 Channels 12 Transistor NPN RS485, supports remote function
8 Transistor A/B phase RS232 + RS485,
SMC-S24MT-e SMC-S24MT 20 Relay RS485, supports remote function
NPN (4 points) Max 5 ports
200KHz
20 Transistor NPN RS485, supports remote function

Service Hotline： Service Hotline：

 Innovate for more,Win forever

Note:An extension module with a communication port that supports both parallel and serial buses.When the serial bus is
extended (i.e. remote IO function), it is not limited by the extension of system points; And its installation can be distributed Item Declare

System state bits SM0~SM215

Analog I/O Expansion Modules (-e : Built-in Ethernet port)
Local relay LM~LM31
Support quantities convert, sample
Power Spec. Model Dimension Analog input register AI0~AI255
Conversion times and zero point correct
Communication
Accuracy Support quantities convert,
12 bits RS485, supports remote function Analog output register AQ0~AQ255 power-off preserve output can be

12 bits RS485, supports remote function V0~V14847 power-off preserve area can be set
70x95x82mm Internal data register freedom
12 bits RS485, supports remote function (default power-off preserve) V1000~V2047

RS485, supports remote function

Power-off preserve area can be set
4 Thermocouple 16 bits TV0~TV1023
Timer(Current value freedom, time base: 10ms, 100ms,
4 Thermocouple 16 bits RS485, supports remote function register) (default power-off preserve) TV96~TV127 1s can be set freedom,T252~T255
1ms
8 Thermal resis-
SMC-TC08EN tance
16 bits RS485, supports remote function 70x95x82mm Power-off preserve area can be set
Counter(Current value CV0~CV255
8 RS485, supports remote function freedom,CV48~CV79 are 32 bits,
SMC-AD08EN-e SMC-AD08EN 12 bits 93x95x82mm register) (default power-off preserve) CV64~CV127 Other are 16 bits
SMC-DA08EN-e SMC-DA08EN 8 12 bits RS485, supports remote function 93x95x82mm System register SV0~SV900
SMC-AN08EN-e SMC-AN08EN 8 4 12 bits RS485, supports remote function 93x95x82mm Local Register Lv0~Lv31
8 Thermal resis- Indexed addressing
SMC-TR08EN-e SMC-TR08EN 16 bits RS485, supports remote function 93x95x82mm P0~P29, use for indirect addressing
tance point
Interrupt I1-I52
Lable 255, use for program skip
Specofication -32768 ~ +32767(16 bits),
Con- 10 Decimal -2147483648 ~ +2147483647 (32 bits)
stant
Proformance Specification 16 Hexadecimal 0000~FFFF(16 bits), 00000000~FFFFFFFF(32 bits )

Item Declare MPU built-in 2 communication port (RS232/RS485), can be used for program or
Communication port
Program control model Max 5 communication port (RS232/RS485) expansion networking (master/slave)
Cycle scan model
Refresh once each cycle scan, support immediately
Input/output (I/O) control model Modbus RTU/ASCII protocol, freedom communication
refresh instruction (MPU and expansion module)
Communication protocol protocol, Savchbus speed communication protocol,
Execution speed of instruction 0.05μs / basic instruction Baud rate 1200~115200bps
Program language LD(ladder) + FBD(function block) + IL( instruction list) Accord with IEC 61131-3 PLC communication address can be set external set,
PLC network capacity built-in battery
Program capacity 48K Max 254,support 1:N, N:1, N:N network
Real time clock(RTC) Display: year/month/day/hour/minute/second/week
Storage way Flash ROM permanent storage, dispense with backup battery
The capacity of hardware Allow 7 pieces extension modules allow 7 pieces extension modules
Support edge catch and signal extension
External input X0~X1023
Have teaching function,7 counting
Power-off preserve output can be model:
External output Y0~Y1023
1 - pulse/direction 1 times,
M0~ M12287 2 - pulse/direction 2 times,
Auxiliary relay Power-off preserve area can be set High speed counter 8 Channels, 200KHz 3 - positive/reversal pulse 1 times,
(default power-off preserve) M1536~M2047 freedom 4 - positive/reversal pulse 2 times,
T0~T1023 Power-off preserve area can be set 5 - A/B phase pulse 1 times,
Timer(output coil) freedom, time base: 10ms, 100ms, 6 - A/B phase pulse 2 times,
(default power-off preserve) T96~T127 1s be set freedom,T252~T255 1ms 7 - A/B phase pulse 4 times
C0~C255 Power-off preserve area can be set 5 output models:
Counter(output coil) freedom 1 - single pulse output,
(default power-off preserve) C64~C127
2 - pulse/direction output,
S0~S2047 High speed pulse output 8 Channels, 200KHz 3 - positive/reversal pulse output,
Power-off preserve area can be set
Step state bits 4 - A/B phase pulse output,
(default power-off preserve) S156~S255 Freedom
5 - Synchronism pulse output

Note:An extension module with a communication port that supports both parallel and serial buses.When the serial bus is Float point arithmetic instruction
point convert arithmetic
extended (i.e. remote IO function), it is not limited by the extension of system points; And its installation can be distributed
Support three level password protection
Password protection
password, PLC hardware password) and upload
prohibited function

Service Hotline： Service Hotline：

 Innovate for more,Win forever

Power Specificcation Digital Input(DI)Wiring Diagram

Item AC Supply DC Supply

Input power supply 100~240VAC 24VDC -15%~+20%

Power supply frequency 50~60Hz ---
Instant surge MAX 20A 1.5ms @220VAC MAX 20A 1.5ms @24VDC
Power output MAX 25VA ---
Permit Power supply lost 20ms within @220VAC 10ms within
Fuse capacity 2A,250V 2A,250V
When input power voltage rise to
95~100VAC, PLC will be run, when input
---
power voltage drop down to 70VAC, PLC
will be stopped.
5VDC for CPU 5V,-2%~+2%,1.2A(maximum) 5V,-2%~+2%,1.2A(maximum)
Output 24VDC power supply for output
power 24V,-15%~+15%,500 mA(maximum) 24V,-15%~+15%,500mA(maximum)
and expansion modules
supply
24VDC power supply for input and Direct use the 24VDC input power
24V,-15%~+15%,300mA(maximum)
external device supply
Transformer/photo electricity Digital Output(DO)Specification
Isolation model No electrical isolation
isolation,1500VAC/1 minute
DC power input polar against, over Item Relay Output-R NPN or PNP Transistor Output -T /P
Protect the power supply 24VDC output over the limit of the current
voltage
Resistance load 2A/1 point,8A/4 point per COM 0.5A/1 point,2A/4 point per COM
maximum
load Inductive load 50VA 5W/24VDC
Product Environment Specification
Light load 100W 12W/24VDC
Item
Min. load 10mA 2mA
Working temperature: 0 ~ + 55 ℃ storage temperature: - 25 ~ + 70 ℃ and humidity: 5 ~ 95%
Temperature/Humidity
RH, no condensation Below 250VAC,30VDC 30VDC
10~57Hz range 0.075mm,57Hz~150Hz acceleration 1G,X, Y, Z three axis 10 times each
Anti vibration Drive capability Maximum 5A/250VAC MAX 1A 10S
direction
Anti shock 15G,continue 11ms,X, Y, Z three axis 6 times each direction Response time Off-on 10ms,On-off 5ms Off→On 10μs, On→Off 120μs

Anti jamming AC EFT: ± 2500V, surge: ± 2500V, DC EFT: ±2500V, surge: ±1000V Leakage current when route opened --- Below 0.1mA
Between AC terminal and PE terminal 1500VAC,1min,Between DC terminal and PE terminal
Over voltage capability Isolation mode Mechanical isolation Each Channel optical isolation
500VAC,1min
Between AC terminal and PE terminal@500VDC,>=5MΩ(Between all input/output terminal and Output indication LED light means ON , dark means OFF
Insulation impedance
PE terminal@500VDC)
Power supply PLC internal power supply 24VDC
Earth The third grounding(Cannot connect to the strong power system’s earth)
Operation environment Operated where no dust, moisture, corrosion, electrical shock and physical shock ,etc.

Digital Input(DI)Specification
Digital Output(DO)Writing Diagram
Item Digital Input DI

Input signal Non-voltage contact or NPN/PNP contact

Action driving ON: 3.5 mA above OFF: below 1.5 mA

Input impedance About 4.3KΩ

Input maximum current 10mA

Response time

Isolation mode Each Channel optical isolation

Input indication LED light means ON, dark means OFF

Power supply PLC internal power supply: DC power(sink or source)5.3mA@24VDC

Service Hotline： Service Hotline：

 Innovate for more,Win forever

Analog Input(AI) Specification Analog Output(AO) Specification

Item Voltage Input Current Input RTD Input Thermocouple Input Item Voltage Output Current Output

Pt100, Output range -10V~+10V 0V~ +10V 0V~+5V 1V~+5V 0~20mA 4~20mA
S, K, T, E, J, B, N, R,
-10V~ 0V~ 0V~ 1V~ 0~ 4~ Pt1000,
Input range Wre3/25, Wre5/26, [0-20] Resolution 5mV 2.5mV 1.25mV 1.25mV 5μA 5μA
+10V +10V +5V +5V 20mA 20mA Cu50,
mV, [0-50]mV, [0-100]mV
Cu100 Output load
1KΩ@10V ≥500Ω@ 5V ≤500Ω
impedance
Resolution 5mV 2.5mV 1.25mV 1.25mV 5μA 5μA 0.1℃ 0.1℃
Output indication LED light means normal
Input impedance 6MΩ 250Ω 6MΩ 6MΩ
Drive capability 10mA
Max input range ±13V ±30mA ±5V Response time 3ms
Input indication LED light means normal , dark means break OFF Digital output range 12 bits, Code range: 0~32000(H series module 16 bits D/A convert)
Precision 0.2% F.S
Response time 5ms/4 Channel 560ms/4 Channel ,880ms/8 Channel
Power supply MPU use internal power supply, expansion module use external power supply 24VDC ±10% 5VA
Digital input
12 bits, Code range: 0~32000(H series module 16 bits A/D convert) 16 bits, Code range: 0~32000
range Isolation mode Opto-electric isolation, Non-isolation between Channel ,between analog and digital is opto-electric isolation
Precision 0.2% F.S 0.1% F.S
Power consumption 24VDC ±20%,100mA(Max)
Power supply MPU use internal power supply, expansion module use external power supply 24VDC ±10% 5VA

Isolation mode Opto-electric isolation, Non-isolation between Channel ,between analog and digital is opto-electric isolation Analog Outnput(AQ) Wiriting Diagram
Power
24VDC ±20%,100mA(Max) 24VDC ±20%,50mA(Max)
consumption

Analog Input(AI) Wiriting Diagram

Programming Cable Wiring DIagram

PC (RS232) PLC(COM1)
DB9 female 4 line S male

Thermocouple & RTD Input Wiring Diagram

Service Hotline： Service Hotline：

 Innovate for more,Win forever

Instruction Table ENCO Encoder FCMP Floating point comparison

DECO Decoder Floating point regional
FZCP
comparison
BTOW Bit convert to word FMOV Floating point move instruction
Instruction Instruction 8bit 32bit Instruction RESH IO refresh
Type Name Model Model Function WTOB Word convert to bit
SHC Single high speed counter FADD Floating point addition
Equal to compare switch ,have
HEX HEX.LB ASCII convert to hexadecimal FSUB Floating point subtraction
= LB.= HB.= D.= 16 bit/32 bit /low byte/high byte HHSC High speed counter
model ASCI ASCI.LB Hexadecimal convert to ASCII FMUL Floating point multiplication
HCWR Write high speed counter
Unequal to compare switch ,have Discrete bit combination to
LB.<> BUNB FDIV Floating point division
<> D.<> 16 bit/32 bit /low byte/high byte SPD Speed detection continuous bit
HB.<>
model
PWM Pulse width modulation Discrete bit combination to FACCU Floating point accumulation
Greater than compare switch BUNW
continuous word
> LB.> HB.> D.> ,have 16 bit/32 bit /low byte/high PLSY D.PLSY Pulse output Data FAVG Floating point average
Discrete word combination to
byte model conversion WUNW
Accelerate and decelerate pulse continuous word FMAX Floating point maximum
PLSR D.PLSR instruction Continuous bit disperse to
Great than or equal to compare output BDIB
LB.>= discrete bit FMIN Floating point minimum
>= D.>= switch ,have 16 bit/32 bit /low High
HB.>= ZRN Origin point return
byte/high byte model speed Continuous word disperse to FTOI Floating point convert to integer
WDIB
Less than compare switch ,have control SETZ Set electric origin point discrete bit
< LB.< HB.< D.< 16 bit/32 bit /low byte/high byte instruction Continuous word disperse to ITOF D.ITOF
PPMR Linear interpolation WDIW Floating
model discrete word point FABS Floating point absolute
Compare CIMR Circular interpolation
Less than or equal to compare BCD D.BCD BIN convert to BCD instruction
switch LB.<= FSQR Floating point square root
<= D.<= switch ,have 16 bit/32 bit /low
HB.<= SPLS Single pulse output BIN D.BIN BCD convert to BIN
byte/high byte model FSIN Sine
Floating-point number equal to MPTO Multi-segment pulse output ITOL Integer convert to long integer
F.= FCOS Cosine
compare switch
SYNP Synchronization pulse output GRAY BIN convert to GRAY code
Floating-point number unequal to FTAN Tangent
F.<> PSTOP Stop pulse output
compare switch GBIN GRAY code convert to BIN
FASIN Arcsine
Floating-point number greater DVIT Interrupt positioning pulse output GHLB Obtain high low byte
F.> FACOS Arccosine
than compare switch
ECAM The electronic CAM GETB Capture byte string
Floating-point number greater FATAN Arctangent
F.>= JOGP Jog pulse output
than or equal to compare switch BCMP BCMP.LB Byte string comparison
FLN Natural logarithm
Floating-point number less than CMP D.CMP Compare instruction Character
F.< ITOC D.ITOC Integer convert to character The base-10 logarithm of a
compare switch instruction FLOG
ZCP D.ZCP Regional comparison number
Floating-point number less than CTOI Character convert to integer
F.<= FEXP Nature exponential
or equal to compare switch MATC D.MATC Numerical match FTOC Floating point convert to character
FRAD Angle convert to radian
STL Step start ABSC D.ABSC Absolute cam comparison CTOF
Step FDEG Radian convert to angle
SFROM Step combine Compare BON ON bit determine WNOT D.WNOT Negation
instruction
instruction FXY Exponent
STO Step jump BONC D.BONC ON bit numbers WAND D.WAND AND operation
WOR D.WOR OR operation TCMP Real time clock comparison
AND Logic AND MAX D.MAX Maximum
WXOR D.WXOR XOR operation TACCU Time accumulative total
OR Logic OR MIN D.MIN Minimum
ADD D.ADD Addition SCLK Setup system clock
XOR Logic XOR SEL D.SEL Selection of conditions Clock
SUB D.SUB Subtraction instruction TIME Time switch
OUT Coil output MUX D.MUX Multi-choice INC D.INC Increase 1
Bit Arithmetical DATE Date switch
SET Setting LBST Low byte evaluation instruction DEC D.DEC Decrease 1
instruction
INVT Count down
RST Reset HBST High byte evaluation MUL D.MUL Multiplication
DIV D.DIV Division SUM SUM.LB SUM verify
ALT ON/OFF alternately output MOV D.MOV Move
ACCU D.ACCU Accumulation BCC BCC.LB BCC verify
ZRST Batch reset BMOV Block move
AVG D.AVG Average CRC CRC.LB CRC verify
ENO Get ENO output FILL Fill
ABS D.ABS Absolute value LRC LRC.LB LRC verify
TON Delay ON XCH Byte swap
NEG D.NEG Two's complement COMM COMM.LB Serial communications
Timer TOF Delay OFF BXCH Block swap
ATCH Interrupt binding
MODR Modbus read
TP Pulse timer SHL Bit left shift
Interrupt DTCH Interrupt release
MODW Modbus write
CTU D.CTU Increase counter SHR Bit right shift instruction ENI Enable interrupt
HWRD SAVCHbus read
Counter CTD D.CTD Decrease counter WSHL Word left shift
DISI Disable interrupt Communication
Shift HWWR SAVCHbus write
CTUD D.CTUD Increase and Decrease counter WSHR Word right shift instruction
instruction MC Master control
RCV Receive communication data
GPWM General pulse width modulation ROL Bit rotate left shift
MCR Master control clear
XMT XMT.LB Sent communication data
FTC Fuzzy temperature control ROR Bit rotate right shift
FOR Loop command
PID PID control FROM
WROL Word rotate left shift read
NEXT Loop end
HAL D.HAL Upper limit alarm WROR Word rotate right shift TO
Program WAIT Delay wait write
Special LAL D.LAL Lower limit alarm BSHL Byte left shift control
CALL Call subroutine TCPMDR Modbus TCP read
function instruction
instruction LIM D.LIM Range limitation BSHR Byte right shift TCPMDW Modbus TCP write
EXIT Condition exit
SC D.SC Linear conversion ATBL Append to array TCPHWR SAVCHbus TCP read
REWD Scanning time reset
VC Valve control FIFO TCPHWW SAVCHbus TCP write
JMPC Condition jump
TTC Temperature curve control LIFO
LBL Jump label
APID Self-tuning PID SORT Data sort

Service Hotline： Service Hotline：

 Innovate for more,Win forever

Communication Address Code Table Dimension and Installation

Bit Component
Equivalently Modbus address type 0, 1, support Modbus function code 1, 2, 5, 15 Mounting and installation
Component Modbus Communication Address Code
Component Name Read/ Write Declare
Range Hexadecimal Decimal
X External input X0~X1023 R 0x0000~0x03FF 0~1023
Y External output Y0~Y1023 R/W 0x0600~0x09FF 1536~2559

M Auxiliary relay M0~M12287 R/W 0x0C00~0x3BFF 3072~15359

T Timer(output coil) T0~T1023 R/W 0x3C00~0x3FFF 15360~16383

C Counter(output coil) C0~C255 R/W 0x4000~0x40FF 16384~16639

The PLC should be secured to an enclosed cabinet
all be read, while mounting. For heat dissipation, make sure to
SM System status bit SM0~SM215 0x4200~0x42D7 16896~17111
some be written provide a minimum clearance of 50mm between
S Step relay S0~S2047 R/W 0x7000~0x77FF 28672~30719 the unit and all sides of the cabinet. (See the above

Rail Mounting: Use standard 35 mm rail.

Register Component Screw Mounting: Each MPU or extension module has
Equivalently Modbus address type 3, 4, support Modbus function code 3, 4, 6, 16 two positioning screw holes, the diameter of the hole

Modbus Communication location of the positioning holes and their spacing.

Component Read/ Address Code
Component Name Declare To avoid over temperature and for a better heat
Range Write
Hexadecimal Decimal dissipation, do not mount PLC to a position near to
All can be the bottom/top of the cabinet. Do not mount PLC in
Use Modbus protocol vertical direction.
expansion module read, some
CR CR0~CR255 0x00~0xFF 0~255 to access expansion
parameter can be Extension Module Wiring: Connections between
module
wrote extension modules and connections between module
AI Analog input register AI0~AI255 R 0x0000~0x00FF 0~255 and MPU are achieved through bus.An extension
Analog output
AQ AQ0~AQ255 R/W 0x0100~0x01FF 256~511 the connection between two different modules.
register
V Internal data register V0~V14847 R/W 0x0200~0x3BFF 512~15359 Connection methods: turn the right side of extended
interface(the last MPU or extension module) over,
TV Timer(current value ) TV0~TV1023 R/W 15360~16383
plug the extension cable in the extended interface,
16 bit register, among then press down the cover of the extended interface
Counter(current
CV CV0~CV255 R/W 0x4000~0x40FF 16384~16639 CV48~CV79 32 bit to reset the interface, the extended interface at the
value )
register right side of the module will be reserved for extension
All can be of the next module. Connect all extension modules in
System special read, some turn in the same way.
SV SV0~SV900 0x4400~0x4784 17408~18308
register can be
written

Declare:

SAVCH PLC use the stand Modbus protocol(support RTU and ASCII mode),can communicate to HMI and configuration soft which
support Modbus protocol. Address Setting
SAVCH PLC's Modbus addressing number from 0, Some HMI or configuration soft from 1, if HMI or configuration soft Modbus SAVCH PLC with Ethernet port, the default IP address is: 192.168.1.111. Hardware DIP dial switch address range: 1-15, the default
Modbus addressing from address is 1. If you need to set a bigger adress range, you can set on the software after connection with PLC, it can be set on the
PLC parameter option in the software menu by checking on the "soft address" with the range of 1-254 (the soft address is prior to the
component type (0/1 is bit relay ,3/4 is word register , 0/4 can read and write, 1/3 read only) other places are the component address. hardware dial address).

Service Hotline： Service Hotline：