Scribd
Upload
62 views

Introduction To Fusion: Advantages of Fusion Power

Nuclear fusion is a promising source of clean energy that could power future power stations. Fusion is the process that powers the sun and stars, where atomic nuclei collide and release energy. Scientists are working to replicate this process on Earth by heating hydrogen gas to 100 million degrees Celsius using strong magnets, creating a plasma. The most developed fusion device is the tokamak, which aims to prove fusion can generate power at a scale needed for commercial energy production. International projects are working towards the development of fusion power plants that could provide abundant, safe, and carbon-free energy.

Uploaded by

The milk goes first
Copyright
© © All Rights Reserved
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
62 views

Introduction To Fusion: Advantages of Fusion Power

Nuclear fusion is a promising source of clean energy that could power future power stations. Fusion is the process that powers the sun and stars, where atomic nuclei collide and release energy. Scientists are working to replicate this process on Earth by heating hydrogen gas to 100 million degrees Celsius using strong magnets, creating a plasma. The most developed fusion device is the tokamak, which aims to prove fusion can generate power at a scale needed for commercial energy production. International projects are working towards the development of fusion power plants that could provide abundant, safe, and carbon-free energy.

Uploaded by

The milk goes first
Copyright
© © All Rights Reserved
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 2

Introduction to fusion

Nuclear fusion is one of the most promising options for generating large amounts of carbon-free
energy in the future.
Fusion is the process that heats the
Sun and all other stars, where atomic
nuclei collide together and release
energy (in the form of neutrons, see
diagram on the right). Fusion
scientists and engineers are
developing the technology to use this
process in tomorrow's power stations.
To get energy from fusion, gas from a
combination of types of hydrogen –
deuterium and tritium – is heated to
very high temperatures (100 million degrees Celsius). One way to achieve these conditions is a
method called ‘magnetic confinement' – controlling the hot gas (known as a plasma) with strong
magnets. The most promising device for this is the ‘tokamak', a Russian word for a ring-shaped
magnetic chamber.
See also: How fusion works
Advantages of fusion power
The world needs new, cleaner ways to supply our increasing energy demand, as concerns grow over
climate change and declining supplies of fossil fuels. Power stations using fusion would have a
number of advantages:
 No carbon emissions. The only by-products of fusion reactions are small amounts of helium, which is
an inert gas that will not add to atmospheric pollution.
 Abundant fuels. Deuterium can be extracted from water and tritium is produced from lithium, which is
found in the earth's crust. Fuel supplies will therefore last for millions of years.
 Energy efficiency. One kilogram of fusion fuel can provide the same amount of energy as 10 million
kilograms of fossil fuel.
 No long-lived radioactive waste. Only plant components become radioactive and these will be safe to
recycle or dispose of conventionally within 100 years.
 Safety. The small amounts of fuel used in fusion devices (about the weight of a postage stamp at any
one time) means that a large-scale nuclear accident is not possible.
 Reliable power. Fusion power plants should provide a baseload supply of large amounts of electricity,
at costs that are estimated to be broadly similar to other energy sources.

See also: Why fusion is needed


Progress in fusion research
Many of the scientific hurdles in fusion have now been
overcome by researchers. The world's largest
tokamak, JET (Joint European Torus), has produced 16
megawatts of fusion power and proved the technical
feasibility of fusion using deuterium and tritium, currently
considered the most efficient fuels. The challenge now is to
prove fusion can work on a power plant scale.
See also: The tokamak
The next steps
International fusion research is following a roadmap to
achieve power generation by 2050. It focuses on three main
projects:
 ITER – a multinational project that is being built in the south of France. ITER will be a 500 megawatt
tokamak (equivalent to a small power plant) and aims to confirm that fusion power will be possible on
a commercial scale;
 IFMIF (International Fusion Materials Irradiation Facility) – a device that will test the materials needed
in a fusion power station, planned to operate in parallel with ITER;
 DEMO – a demonstration power plant supplying fusion electricity to the grid. This is being designed
now and would be constructed during ITER and IFMIF operation. If successful, it will be followed by
the first generation of commercial fusion power stations.

See also: Achieving fusion power


Fusion in the UK
The United Kingdom's fusion research programme is based at Culham Centre for Fusion Energy
(CCFE) in Oxfordshire. The work is funded by the Engineering and Physical Sciences Research
Council and by the European Union under the Euratom treaty.
The UK contributes to fusion research in two main ways:
 Its own fusion programme, centred on the MAST (Mega Amp Spherical Tokamak) device. The UK
programme also makes important contributions to ITER preparations and to theory, materials and
technology research;
 Operating JET, Europe's flagship experiment. JET is situated at CCFE next to the UK's fusion
laboratory. CCFE hosts the JET facility on behalf of fusion researchers around Europe via a
contract between the European Commission and the United Kingdom Atomic Energy Authority.

You might also like