TEACHING SCHEME AND COMPLETE SYLLABUS

POSTGRADUATE PROGRAMMES

[M.Tech. in Environmental Engineering]

Session: 2015 (Onward)

Centre for Energy and Environmental Engineering

National Institute of Technology
Hamirpur, Himachal Pradesh, India– 177 005
Web Site: http://www.nith.ac.in
 CENTRE FOR ENERGY AND ENVIRONMENTAL ENGINEERING
NATIONAL INSTITUTE OF TECHNOLOGY, HAMIRPUR
HIMACHAL PRADESH, INDIA-177005

Post Graduate Programmes

[M.Tech. in Environmental Engineering]

The Centre for Energy and Environmental Engineering established at the National Institute of
Technology, Hamirpur, in the year 2009 started Post Graduate programmes in M.Tech w.e.f. July
2010.
Objectives:
1. The course on environmental Engineering will be helpful to gene4rate human resource in this
important area. The course will be helpful for the students to be competent in the area of
pollution control, environmental monitoring, and design of household sanitation and water
supply systems. Development of this course on will improve overall national development.
Due to the tremendous increase in population, the requirement of housing, transport, power,
telecommunication, drinking water and energy is increasing rapidly and wastes are produced
in vast amount. This course will be able to fulfil the current needs and future demand of water
supply and monitoring, control, management and treatment of waste and pollution.

The Centre offered Post Graduate Programme, M.Tech. in Environmental Engineering w.e.f July
2015

M.Tech [Environmental Engineering]

Eligibility: the Applicant must have a Bachelor’s degree in the following
Engineering/Technology discipline:
 Civil Engineering
 Chemical Engineering
 Environmental Engineering
Type of Academic Programme and Annual Intake:
Post Graduate programme M.Tech in Environmental Engineering, with Annual intake of 25
students: General: 10, SC: 3 ST: 02, OBC: 05, Sponsored: 05.
Learning Methodology
The learning methodology will consist of class room teaching through lectures, tutorials, seminars
and group discussions. In order to give practical insight, experiments will be conducted in the
laboratories of the Centre.
Fee Structure: The fee structure for the programme will be in accordance with regular PG
Programme norms of NIT, Hamirpur.
Courses of Study
The Courses are designed for awarding M.Tech [Environmental Engineering] degree after two year
duration of study. The Core Courses and Elective Courses have been structured in such a manner
that the students with different backgrounds will have the option to choose the elective courses so
as to become specialized in a specific field.

2
Centre for Energy and Environmental Engineering, NIT –Hamirpur (HP)
M. Tech (Environmental Engineering)

Teaching Scheme

(i)Year I - Semester I
S. No. Subject Title L T P Credit Hours
Code /Week
1. EN-620 Environmental Chemistry 3 0 0 3 3
2. EN-621 Microbiology and Ecology 3 0 0 3 3
3. EN-622 Advanced Water Treatment 3 0 0 3 3
4. EN-___ Elective-I 3 0 0 3 3
5. EN-___ Elective-II 3 0 0 3 3
6. EN-623 Environmental Engg. Lab-I 0 0 3 2 3
Total 15 0 3 17 18

(ii)Year I - Semester II
S. Subject Course Title L T P Credit Hours
No. Code /Week
1. EN-624 Statistical Methods and Modelling 3 0 0 3 3
2. EN-625 Advanced Waste water Treatment 3 0 0 3 3
3. EN-626 Design of Treatment Plants and 3 0 0 3 3
Equipments
4. EN-___ Elective-III 3 0 0 3 3
5. ------ *Open Elective-I 3 0 0 3 3
(From Other Departments)
6. EN-627 Environmental Engg. Lab-II 0 0 3 2 3
Total 15 0 3 17 18
*The student will have to take an Open Elective offered by other Departments
during Semester

(iii)Year II – Semester III

S. Subject Course Title L T P Credit Hours
No. Code /Week
1. EN-799 Self study Course 0 0 0 2 3
2. EN-800 Seminar 0 0 3 2 3
3. EN-801 Dissertation –1[to continue in the 0 0 0 12 24
IVth semester]
Total 0 0 3 16 30

(iv)Year II - Semester IV
S. Subject Course Title L T P Credit Hours
No. Code /Week
1. EN-801 Dissertation – [Continued from IIIrd - - - 20 40
semester]
Total 20 40

3
(v) List of Electives for M.Tech [Environmental Engineering]

S.No. Subject Course Title L T P Credit Hours

Code /Week
1. EN-720 Solid & Hazardous Waste 3 0 0 3 3
Management
2. EN-721 Air Pollution and Control 3 0 0 3 3

3. EN-722 Industrial Waste Management 3 0 0 3 3

4. EN-723 Environmental Impact 3 0 0 3 3

Assessment
5. EN-724 Environmental Toxicology and 3 0 0 3 3
Health
6. EN-725 GIS and its Application in 3 0 0 3 3
Environmental Engineering

4
 M.TECH (ENVIRONMENTAL ENGINEERING) DETAILED SYLLABUS

(i) M.TECH CORE COURSE DETAILS: SEMESTER-I

Course Code Course Name L T P C

EN 620 Environmental Chemistry 3 0 0 3

Types of chemical reactions, stoichiometric calculations, solutions, chemical

thermodynamics, fundamentals of process kinetics, gas laws, ways of shifting chemical
equilibria. Equilibrium calculation, alkalinity, acidity, buffers, buffer index. Solubility
equilibrium for slightly soluble salts, effect of other solutes on salt solubility, competing acid-
base equilibria, effect of complexions, hydrolysis, computing total soluble species
concentration Oxidation-reduction processes, stability diagrams, redox potential.
Fundamental of Process kinetics: Reaction rate, order and stoichiometery. Fundamental of
surface and colloidal chemistry: surface charge on colloidal particles, electric double layer,
adsorption isotherm. Basic concepts of quantitative analytical chemistry. Instrumental
methods of analysis.

References

1. Sawyer, C.N. and McCarty, P.L., and Parkin, G.F. Chemistry for Environmental
Engineers , 4th Edn. McGraw Hill, New Delhi, 1994.
2. Benefield, Judkins and Weand – Process Chemistry for Water and Wastewater
Treatment, Prentice Hall

5
Course Code Course Name L T P C
EN 621 Microbiology and Ecology 3 0 0 3

Introduction : Microorganisms - classification, prokaryotic and eukaryotic cells,

structure, characteristics, nucleic acids, DNA and RNA, replication. Recombinant
DNA. Viruses, their detection and quantification. Microsopcy, Measurements and
Isolation of Microorganism, Different Cultures, Media and Techniques of Staining
and Enumeration of microorganism.
Microbial Metabolism and Growth : Enzyme and enzyme kinetics, Metabolism,
respiration, fermentation, Glycolysis, Kreb's cycle, carbohydrate, protein, lipids,
significance of energetics. Chemical composition of cell and nature of organic matter
used by microorganisms. Metabolic classification of microorganisms : phototrops,
chemotrops, applications in environmental engineering
Microbiology of Water and Wastewater : Distribution of microorganisms,
indicator organisms, coliforms - fecal coliforms - E.coli, Streptococcus fecalis
differentiation of coliforms - significance - MPN index, M.F. technique, standards.
Microbiology of wastewater treatment processes such as activated sludge process,
trickling filter, anaerobic processes.
Introduction to Microbiology of Soil and Air and Industrial Microbiology,
Microbiology of bioremediation and solid waste treatment
Physical and Biological process on earth: Bio-sphere, earth energy budget,
Ecosystem, Uniformitarianism, the ecology of population, Ecosystem and
communities: Physical and biological properties

References

1. Maier R M, Pepper I L and Gerba C P. Environmental Microbiology, Second

Edition, Elsevier- AP, 2009.
2. Pelczar, Jr, M.J., Chan, E.C.S., Krieg, R.N., and Pelczar M. F, Microbiology, 5th
Edn., Tata McGraw-Hill Publishing Company Limited, New Delhi, 1996.
3. Rittman B, McCarty P L McCarty P, Environmental Biotechnology: Principles
and Applications, 2nd edition, McGraw-Hill, 2000
Course Code Course Name L T P C
EN 622 Advanced Water Treatment 3 0 0 3

Sedimentation and coagulation : Types, settling tests, scale up, Batch flow and
continuous flow operations. Coagulation, mechanisms of coagulation, effect of
turbidity and alkalinity, chemistry of coagulants.
Flow through beds of solids : Slows sand filters, rapid sand filters, ion exchange
units, adsorption towers, contacting towers, flow through expanded beds, flow
through porous plates and membranes.
Gas transfer and Disinfection Mechanism of transfer, film coefficients
and equilibrium relationship, gas disperses, packed columns, tray columns, spray
units. Disinfection, mechanism, different agents.
Advanced treatment operations: Adsorption, isotherms, reverses osmosis,
electrodialysis, ultrafiltration, etc.
Applications of Unit Operations in Water Treatment and Design of Physical
Facilities

References
1. Metcalf and Eddy Inc, Wastewater Engineering: Treatment, and Reuse, 4th
edition, Tata McGraw Hill, 2007.
2. Weber W. Physicochemical Processes for Water Quality Control, Wiley-
Interscience, New York, 1972.
3. Schroeder E D. Water and Wastewater Treatment, McGraw-Hill, 1997
4. Ministry of Urban development, Govt of India – Manual for Water Treatment.

7
Course Code Course Name L T P C
EN 623 Environmental Engineering Laboratory-I 0 3 3 2

Analysis of water/wastewater for physicochemical parameters

Turbidity, Alkalinity, pH, hardness, chlorides, sulphates, nitrates, oil and grease,
available chlorine, Dissolve Oxygen , Biochemical oxygen demand, chemical oxygen
demand.

Microbiological techniques
Microscopy, staining techniques, isolation and growth of bacteria, microbiological
quality of water – MPN, Plate count and membrane filtration techniques, effect of
environmental factors on microbial growth.

Ambient air quality monitoring for sulphur dioxide, nitrogen oxides, carbon
monoxide, particulates using high volume sampler

Stack monitoring

8
(ii).M.TECH CORE COURSE DETAILS: SEMESTER -II

Course Code Course Name L T P C

EN 624 Statistical Methods and Modelling 3 0 0 3

Introduction : Measures of Central tendency, dispersion, skewness and kurtosis -

Principle of least squares - Correlation and regression - rank correlation.
Sampling Distributions and Estimation
Sampling distributions - Point and interval estimates for population proportions, mean
and variance – Maximum likelihood estimate method - Method of moments.
Testing of Hypothesis
Sampling distributions - Tests based on Normal, t, Chi-square and F distributions
Analysis of variance – one-way and two-way classifications.
Mathematical modelling and simulation, Defining systems and its components, Types
of models and their applications.
Introduction to Soft Computing Techniques
Fuzzy set theory and logic, Fuzzy MCDM and FRBS, simple applications in
environmental engineering. Neural networks and Genetic Algorithsms

Models for Fate and Transport of Contaminants

Modelling of volatilization, chemical transformations, sorption/desorption,
photochemical transformations, biological transformations. Brief review of mass,
momentum and energy balance, advection, molecular diffusion, dispersion, their
application in modelling of rivers, lakes, sediments, wetlands, subsurface flow and
transport, air pollution modelling

References
1. Box G E P, Hunter J S and Hunter W G Statistics for Experimenters, 2nd Edition,,
John Wiley and Sons, 2005
2. Berthouex P M and Brown L C. Statistics for Environmental Engineers, 2nd
Edition, CRC Press, 2002.
3. Freund, J.E. and Miller, I.R., Probability and Statistics for Engineers, Prentice–
Hall of India, 5th Edition, New Delhi, 1994
4. Ramaswami, A, Milford, J B, Small, M. J. Integrated Environmental Modeling -
Pollutant Transport, Fate, and Risk in the Environment John Wiley & Sons, 2005.
5. Burrough, P.A. and McDonnell, R.A., Principles of Geographical Information
Systems, Oxford University Press, 1998.
6. Snape, J.B., Dunn, I.J. Ingham J and Prenosil J Dynamics of environmental
bioprocesses, modelling and simulation Weinheim: VCH, 1995.
7. International Water Association - Activated sludge modelling ASM1 and ASM2
8. Chapra S C, Surface Water Quality Modeling, McGraw-Hil, Inc., New York,
1997.

9
Course Code Course Name L T P C
EN 625 Advance Wastewater Treatment 3 0 0 3

Kinetics of Biological Growth: Nutrition and growth conditions, Effect of

environmental conditions, bacterial growth in terms of numbers and mass, growth
curve, interpretation of curve, substrate limited growth, Monod's expression, substrate
utilization and cell growth, effect of endogenous metabolism, inhibition, effect of
temperature, application of growth and substrate removal kinetics to biological
treatment.
Reactors and Reactor nalysis. Types of reactors and their analysis

Biological Processes: Fundamentals and design concepts of aerobic treatment

processes. Anaerobic treatment processes
Nutrient removal and Pond treatment processes: Biological processes for nitrogen
and phosphorus removal. Different pond treatment systems
Biological processes for sludge processing

References

1. Metcalf and Eddy Inc, Wastewater Engineering: Treatment, and Reuse, 4th
edition, Tata McGraw Hill, 2007.
2. Benefield L D, and Randall, C W. Biological Process Design for Wastewater
Treatment Prentice Hall, 1980.
3. Schroeder E D. Water and Wastewater Treatment, McGraw-Hill, 1997
4. Karia G L and Christian R A. Wastewater Treatment : Concepts and Design
Approach, Prentice Hall, 2006.
5. Soli J Arceivala, Wastewater treatment for pollution control

10
Course Code Course Name L T P C
EN 626 Design of Treatment Plants and Equipment 3 0 0 3

Design of screens, grit chamber, skimming tank, and flotation tank. Design of
equalization tank, Design of plug flow and complete mix activated sludge process,
secondary settling tank, trickling filter, bio tower, rotating biological contactors,
sequencing batch reactor, oxidation ditch, and aerated lagoon.

Design of oxidation ponds, Inhoff tank, septic tank, design of sludge digestion, sludge
thickening unit, sludge trying bed, incinerators, Design of anaerobic reactors, Design
of anaerobic filter, UASB reactor. Design of disposal system

References

(1) Ministry of Urban development, Govt of India – Manual for Sewage Treatment.
(2) Qasim S R, Motley E M and Zhu G, Water Works Engineering, Prentice-Hall
India, 2006.
(3) Montgomery – Water Treatment Principles and Design, John Wiley and Sons.
(4) Metcalf and Eddy Inc – Wastewater Engineering: Treatment, and Reuse, 4th
edition, Tata McGraw Hill, 2007.

11
Course Code Course Name L T P C
EN 623 Environmental Engineering Laboratory-II 0 3 3 2

Analysis of solid wastes

Characterisation of wastes from different industries
Coagulation and flocculation/optimum dosage of coagulants
Filtration Performance Studies
Kinetics of chlorination
Water softening by chemical precipitation
Adsorption kinetics
Sludge Volume Index
Settling characteristics of discrete settling solids
Removal of heavy metals by precipitation

12
(iii).M.TECH CORE COURSE DETAILS: SEMESTER -III

Year II – Semester III

S. Subject Course Title L T P C Hours/
No. Code Week
1. EN-799 Self Study Course 0 0 0 3 3
2. EN-800 Seminar 0 0 3 2 3
3. EN-801 Dissertation Phase –1 [to continue in the 0 0 0 12 24
IVth semester]
Total 0 0 3 17 30

EN-799: Self Study: - The faculty adviser will decide a specific problem and the
students are required to study the subject. They are required to submit a syllabus in
consultation with faculty adviser at the end of the second semester. Syllabus will be
internally assessed by the faculty adviser and course coordinator and same will be
approved in the department post-graduate committee.

EN-800: SEMINAR: - Each Student is required to present a seminar on a scheduled

date and a typed copy of the seminar report is to be submitted. Assessment is based on
the presentation and contents of seminar report

(iv). M.TECH CORE COURSE DETAILS: SEMESTER –IV

Year II - Semester IV

S. Subject Code Course Title L T P C Hours/

No. Week
1. EN-801 Dissertation -Phase-II - - - 20 40
[Analysis, Presentation ,Viva]
Total 20 40

EN-801: DISSERTATION PRELIMINARY/ FINAL DISSERTATION

Each student is to carry out the dissertation work for which topic will be assigned
at the end of the second semester.

The main objective of dissertation work is to provide scope for original and
independent study/research, to develop a theme and to demonstrate ability of using
analytical approach independently. The theme or topic of dissertation should be
within the framework of P.G. Programme.

Thesis is prepared by each student under the supervision of the faculty advisor and
to be submitted as per the specified time and the student has to defend his/her work
at the viva-voce examination fixed by the Institute.

13
(V). M.TECH. ELECTIVE COURSES DETAILS:

Course Code Course Name L T P C

EN 720 Solid And Hazardous Waste Management 3 0 0 3

Introduction
Solid waste sources - nature and characteristics - Quantities and Qualities - generation
rates – Potential of disease - nuisance and other problems.

Collection and Storage

Solid waste management – Functional elements of solid waste-on-site storage, collection
and separation. – Containers and its location – collection systems- vehicle routing- route
balance- transfer station - Processing- recovery and reuse.

Disposal
Disposal methods – sanitary land filling, planning, site selection, design. Monitoring
Closure and post closure monitoring – Other methods like incineration, pyrolysis,
composting, biological digestion,

Hazardous Waste Management

Introduction to hazardous waste – Definition, characterization and composition – TCLP
test – The magnitude of problem – Risk assessment - – Storage and transportation of
hazardous waste – Labeling of hazardous waste – Physical, Chemical and Biological
treatment of hazardous waste – Bioremediation of hazardous waste – Treatment of
nuclear waste and Radio-active waste.

Legislation
Biomedical waste and BMW-98 Rules - MSW-2000 Rules – Legislation for E-waste and
radio active waste.

References
1. David Rimbers, "Municipal Solid Waste Management: Pollution Technologies
Review", Noyes Data Corporation, London. (1990)
2. Charles A. Wentz, "Hazardous Waste Management", McGraw Hill International
Edition, New York. (1995)
3. Tchobanoglous G, “Solid Wastes: Engineering principles and Management
issues”, McGraw Hill Book Company, Delhi. (1977)
4. Michael D. Lagrega, Phillip L. Buckingham, Jeffrey C. Evans, “Hazardous Waste
Management” McGraw Hill, New York. (1994)
5. Gaynor W. Dawson, Basil W. Mercer, “Hazardous Waste Management” Wiley
Interscience, New York. (1986)

14
Course Code Course Name L T P C
EN 721 Air Pollution and Control 3 0 0 3

Air Quality and Standards :

Important air pollutants, their sources, characteristics and effects. Sampling and Analysis:
Ambient air sampling, stack sampling, Air quality standards.
Air Pollution Meteorology and Dispersion Models.
Atmospheric motion, Lapse rate, atmospheric stability, inversion, atmospheric dispersion,
maximum mixing depth, Diffusion models, plume rise.
Control of Particulates
Characteristics of particulates. Filters, gravitational, centrifugal-multiple type cyclones,
prediction of collection efficiency, pressure drop, wet collectors, Electrostatic Precipitation
theory-particle charging-particle collection-ESP design procedure
Control of Gaseous Pollutants
adsorption, absorption. Emission control in coal-fired power plants and other important
industries. Condensation and incineration
Automobile Pollution
Legislation for motor vehicle emission control, control of automobile pollution, internal
combustion engines, modification of IC engines to reduce emission, air fuel ratio, catalytic
converters.
Odour pollution and control, Indoor air pollution, Noise pollution and control

References
1. de Nevers, H Air Pollution Control Engineering., McGraw-Hill, New York, 1995.
2. Wark K, Warner C F and Davis W. Air Pollution Its Origin and Control, 3 rd edition,
Harper and Row, New York, 1997.
3. Rao M N, Air Pollution, Tata McGraw Hill, New Delhi, 1989.
4. Griffin R D, Principles of Air Quality Management, 2nd Edition, CRC Press, Boca
Raton, USA, 2007.

15
Course Code Course Name L T P C
EN 722 Industrial Waste Management 3 0 0 3

Introduction to Industrial wastes

Industrial waste source, Nature and characteristics, quantity and quality of industrial wastes
and their impact on the environment, waste volume reduction, waste strength reduction,
neutralization, removal of suspended and colloidal solids, removal of inorganic and organic
dissolved solids, disposal of sludge solid – treatment of cyanide waste – heavy metal and
radio activity.

Management
Management of industrial waste for various industries like dairy, sugar, paper, distillery,
textile, tannery, food processing, fertilizer, pharmaceutical industrial.

Recent Trends
Development of integrated treatment for waste water – physico chemical treatment tertiary
treatment methodologies - recent trends in clean technologies – zero polluting industry
concept – Reuse and recycle of waste water.

References

1. Nemerow, N.L. Liquid waste of Industries, Addison Wesely. 1996

2. Rao M N and Datta A K Wastewater Treatment, Oxford & IBH Publishing Co. Pvt.
Ltd, New Delhi.
3. Eckenfelder. Industrial Water Pollution Control, McGraw-Hill.
4. Metcalf and Eddy, (1995) Wastewater Engineering-treatment, Disposal, Refuse,
T.M.H. Edition, New Delhi.

16
Course Code Course Name L T P C
EN 723 Environmental Impact Assessment 3 0 0 3

Environment and its components, Concept of Ecological imbalances, carrying capacity and
sustainable development. Evolution of environmental impact assessment (EIA), Current
screening process in India. A step-by-step procedure for developing EIA. Elements of
Environmental Analysis. Public consultation, Post monitoring, Data collection for Air
Quality Impact analysis, Water Quality Impact Analysis and energy impact analysis. Impact
Assessment Methodologies-Matrices, overlays, network analysis. Case studies of Industrial
EIA and Water resources projects. Brief introduction about Environment legislation and
Environmental Audit.
References:
1. Environmental Impact Assessment for Developing Countries: Asit K. Biswas
2. Environmental Impact Analysis Handbook : G.J. Rau and C.D. Wooten
3. Environmental Impact Assessment by C.W. Canter
4. Environmental Impact Assessment Theory and practice Peter Wathern

17
Course Code Course Name L T P C
EN 724 Environmental Toxicology and Health 3 0 0 3

Dimensions of environmental health, causative agents of diseases, social factors, urban

problems, housing and health, economy and health, climate and other atmospheric elements,
violence, crime and mental health, family health practice, health care planning and delivery,
chronic and communicable diseases.
Industrial and agricultural pollutants, occupational health, epidemiological data, occupational
health hazards, environmental exposure and diseases, industrial toxicants, hazardous wastes,
preventing exposure to unhealthy and unsafe working conditions, ergonomics, controlling
stress of life.
Disease control, disease prevention, morbidity and mortality, diseases and progressive
deterioration, controlling diseases and disability.
Foodborne and waterborne diseases outbreaks, Nuclear energy and environmental health,
concerns and uncertainties about nuclear power, nuclear power plants, safety.
Environmental health planning, need for planning, the planning process. Environmental
health services, various agencies, international efforts, role of industry, voluntary health
agencies, Law and human welfare, public health and the law, constitutional right to healthy
environment, environmental education Health aspects of water supply and sanitation, disposal
of wastewater in rural and urban areas, integrated approach to health and sanitation.
Transmission of diseases through air, water and food. Insect vector and rodent control.
Excreta treatment and management in rural and urban slums, low cost options. Software
related to environmental health and hygiene.
References
1. Cairncross S, Feachem R. Environmental Health Engineering in the Tropics; 2nd edition,
John Wiley & Sons 1993.
2. Morgan M T, Environmental Health, Wadsworth Publishing Co, 1997
3. The World Bank – Appropriate technology for water supply and sanitation (Series)

18
Course Code Course Name L T P C
EN 725 GIS and its Application in Environmental 3 0 0 3
Engineering

Essential components of GIS, geographic grid, map projection, coordinate systems. Vector
data and its representation, topological and non-topological vector data, TIN, vector
analysis. Acquiring and handling of raster data, GIS data analysis. GIS packages and their
salient features,
Advantage and disadvantage of GIS application. Selection of software and hardware, Need
analysis. Remote sensing Application. GPS application, DEM Application, Mapping, Water
and sewer model

1. C.P. Lo Concept and Techniques of Geographical Information systems

2. Kang-tsung Chang Introduction to Geographical Information systems
3. Stan Aromoff Geographical Information systems‐ A Management Perspective
4. U.M. Shamsi GIS Applications for water, wastewater, and stormwater systems

19