Scribd
Upload
184 views

Quick Instruction For Erisan Anycast

This document provides instructions for connecting various devices to an EZM2 Wi-Fi device. It explains how to connect Android devices using Miracast, iOS devices using DLNA, and Windows devices either using Miracast or third party software. It also describes how to change the default booting mode of the EZM2 device.

Uploaded by

Anven Groups
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
184 views

Quick Instruction For Erisan Anycast

This document provides instructions for connecting various devices to an EZM2 Wi-Fi device. It explains how to connect Android devices using Miracast, iOS devices using DLNA, and Windows devices either using Miracast or third party software. It also describes how to change the default booting mode of the EZM2 device.

Uploaded by

Anven Groups
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 7

Quick Instruction for ERISAN AnyCast

Any questions, please email: [email protected]

The EZM2 has two modes for Wi-Fi connection, one is the Miracast for Android, the other is the

DLNA for iOS(like iPhone, iPad or Macbook)

Please press the "Fn" button to enter in the correct mode.

1
Miracast: for Android（PSK：xxxxxxxx, the numbers“xxxxxxxx” is the password）

DLNA: for iOS devices.（PSK：xxxxxxxx, the numbers“xxxxxxxx” is the password）

2
Part 1. Instruction For android device(Press the FN button to enter in the Miracast mode):

Please plug the EZM2 Wi-Fi device in the HDMI port & 5V USB ports of the projector/TV, then power on

the projector/TV and select the input signal as HDMI, it will show the booting screen.

Notice: Android device Must support Miracast, please check the settings of android phone/tablet

to use “Smart View”/ "Wireless Display" / "Screen Mirroring" to connect.

Not sure? Please consult the device manufacturer for assistance.

(1) (2)

(3) (4)

3
Part 2. Instruction For iOS device(Press the FN button to enter in the DLNA mode):

Please plug the EZM2 Wi-Fi device in the HDMI port & 5V USB ports of the projector/TV, then power on

the projector/TV and select the input signal as HDMI, it will show the booting screen.

Mode: DLNA, PSK：xxxxxxxx, the numbers“xxxxxxxx” is the password

Go to Setting of your iPhone/iPad, In the WLAN, please

connect to the WiFi named like "Anycast-xxxxxx", input the

Password（PSK：xxxxxxxx, the numbers“xxxxxxxx” is

the password）.

(1)

Open the web browser of your iPhone/iPad, like Safari or

Chrome, input the IP:“192.168.203.1”, please click the first

option "Internet", then you can find your home's WiFi and

please connect to it.

Please wait about 3-5 seconds after you input the

Password of your WiFi password.

(2)

4
Go back to Setting of your iPhone/iPad, In the WLAN,

please click the WiFi named like "Anycast-xxxxxx" again.

(3)

Slide upward from the bottom of iPhone/iPad to display

the hidden menu, please click "Airplay Mirroring".

(4)

Then please click "Anycast-xxxxxx".

(5)

5
Part 3. Instruction For Windows(Press the FN button to enter in the Miracast mode)

Notice: Only support Windows® 10 Operating system with a 4th Generation (or newer) processor.

Does Not support Windows 7 and Windows 8.

For Windows, Please check the Compatibility, GO to www.intel.com & Search 000021494

If Windows PC/Laptop/Tablet does not have the Inter WIDI feature, please use the third-party

Software“AirParrot”to connect.

6
You can set the Default Booting Mode in AirSetup, here is how:

1. Press Fn button to enter in DLNA mode.

2. In Wi-Fi of Android/iOS, connect to “Anycast-xxxxxx", （PSK： xxxxxxxx, the numbers“xxxxxxxx” is

the password）.

3. After connected, open the web browser of your iOS/Android (like Safari or Chrome), input the IP:

“192.168.203.1”, you can set the default booting mode by clicking the option "Default Mode".

4. Default Booting Mode can be switched to selected.

Any questions, please email: [email protected]

You might also like