DHCP Config
DHCP Config
Topology Diagram
Addressing Table
All contents are Copyright © 2008 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information. Page 1 of 3
CCNA Exploration
Accessing the WAN: IP Addressing Services PT Activity 7.1.8: Configuring DHCP Using Easy IP
Learning Objectives
• Configure routers with Easy IP.
• Verify that PCs are dynamically configured with addressing details.
• Configure a DNS server with DNS entries.
• Test PC connectivity to domain names.
Introduction
DHCP assigns IP addresses and other important network configuration information dynamically. Cisco
routers can use the Cisco IOS feature set, Easy IP, as an optional, full-featured DHCP server. Easy IP
leases configurations for 24 hours by default. In this activity, you will configure DHCP services on two
routers and test your configuration. The user EXEC password is cisco, and the privileged EXEC
password is class.
On R1, name the address pool R1LAN. Specify the address pool, default gateway, and DNS server that
are assigned to each client device requesting DHCP service.
Step 1. Verify that PC1 can connect to servers using the domain name.
On PC1, open the web browser and enter www.cisco.com in the address line. The web page should
appear.
Step 2. Verify that PC3 can connect to servers using domain name.
On PC3, open the web browser and enter www.publicsite.com in the address line. The web page
should appear.
All contents are Copyright © 2008 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information. Page 3 of 3