Sprint DG

Set Client Polling- +OMAPOLL

+OMAPOLL – Set Client Polling
AT+OMAPOLL= Enable/Disable Sprint Client Polling Mechanism.
<flag> Parameter:
<flag> : 1 – Enable Polling
0 - Disable Polling.
AT+OMAPOLL? Read command returns return the current OMA-DM Polling setting.
AT+OMAPOLL Test command returns the supported parameters.
=?
Example AT+OMAPOLL=1
OK
Reference 3GPP TS 27.007

Hands Free Activation Command- +HFA

+HFA – Hands Free Activation Command
AT+HFA=<flag> Enable/Disable Sprint HFA Mechanism.

Starts A CI HFA (DC+PRL+FUMO).

Parameter:
<flag> : 0 - Disable HFA.
1 – Enable HFA
2 – Starts Client Initiated HFA Session

Pay attention: The HFA Session includes:

1. DC session
2. PRL session
3. Reboot
4. Fumo session

AT+HFA? Read command returns return the current OMA-DM HFA setting.
AT+HFA =? Test command returns the supported parameters.
Example AT+HFA=1
OK

AT+HFA=2
OK
Reference 3GPP TS 27.007

Set OMADM Capabilities Command - +OMADM

+OMADM – Set OMADM Capabilities Command
AT+OMADM=<fl Enable/Disable Sprint Device Configuration Mechanism.
ag> Starts A CI OMADM Session.
Parameter:
<flag> : 0 - Disable OMADM.
1 – Enable OMADM.
2 – Starts Client Initiated OMADM Session

Pay attention: The OMADM Session includes:

1. DC session
2. Reboot

AT+OMADM? Read command returns return the current OMA-DM DC setting.

AT+OMADM =? Test command returns the supported parameters.
Example AT+OMADM=1
OK

AT+OMADM=2
OK
Reference 3GPP TS 27.007

Set PRL Capabilities Command - +PRL

+PRL – Set PRL Capabilities Command
AT+PRL=<flag> Enable/Disable Sprint Device Configuration Mechanism.
Starts A CI PRL.
Parameter:
<flag> : 0 - Disable PRL.
1 – Enable PRL.
2 – Starts Client Initiated PRL Session

AT+PRL? Read command returns return the current OMA-DM PRL setting.
AT+PRL =? Test command returns the supported parameters.
Example AT+PRL=1
OK

AT+PRL=2
OK
Reference 3GPP TS 27.007

Set OMA Maintenance Window Command - +OMAMW

+OMAMW – Set OMA Maintenance Window
AT+OMAMW=<t Set the OMADM Maintenance Window.
ime> If the Maintenance Window is set the unit will perform reboot only when the clock
reach the Maintenance Window.
Parameter:
<time>: in 24 hour format, UTC time
Setting time to zero will disable the Maintenance Window
AT+OMADM? Read command return the current value of time
AT+OMADM =? Test command returns OK
+OMAMW – Set OMA Maintenance Window
Example AT+OMAMW="01:00" -> sets the MW to 1 AM
OK
AT+OMAMW="13:00" -> sets the MW to 1 PM
OK
AT+OMAMW="0" -> Disable the MW
Reference 3GPP TS 27.007

Lab Commands

Set Sprint Polling Interval Command- #SPPRL

#SPRPL – Set Sprint Polling Interval
AT#SPRPL= Set the device the device polling interval before performing a DC+PRL session.
<polling_interval> Parameter:
< polling_interval > - in hours (default 720: 30 days)

AT#SPRPL? Read command returns the polling interval value.

AT#SPRPL=? Test command returns the OK result code.
Example AT+OMAPOLL=1
AT#SPRPL=1 -> set the polling timer to 1 hour
Reference 3GPP TS 27.007

Device Reset Command- $RTN

$RTN – Device Reset Command
AT$RTN= Set the device to factory defaults and power cycle the device if the correct SPC is
<spc> entered.
Parameter:
<spc> - the SPC of the device (default: 000000)
are mandatory), range is -96..+96
AT$RTN? Read command returns the OK result code.
AT$RTN=? Test command returns the OK result code.
Example AT$RTN=000000
OK
Reference 3GPP TS 27.007

Debug Information Command- $DEBUG

$DEBUG – Debug Information Command
AT$DEBUG? Return the list of debug information
Example AT$DEBUG?
OK
$DEBUG – Debug Information Command
LTE Engineering:

IMSI: "310120052246488"
State: idle
PLMN ID: 310 120
PCI: 157
Band: 25
UL channel:
DL channel: 8665
RSRP: -88dBm
RSRQ: -6dB
RS-SINR: 193dB
RSRP: -88dBm
RSRQ: -6dB
RS-SINR: 193dB
Tx Pwr:
IP - internet:
IP - ota:
Error: 36
APN: internet: n.ispsn
OTA : otasn

CONFIGURATION:

Technology: LTE
1x Diversity: Not Supported
EVDO Diversity: Not Supported
QLIC: Not Supported
PRL: Not Supported
Chipset: MDM9607
AMSS Version: LE.1.0.1
Device Version: 25.00.242
HW Version: 21
Data Status
IP Address (EVDO): Not Supported
1X: Not Supported
Last Error Code: Not Supported

OK
Reference 3GPP TS 27.007

Display Client Status Message- +OMASTAT

+OMASTAT – Display Client Status message
AT+OMASTAT= Enable/Disable the device Status messages.
<flag>
Parameter:
<flag> : 0 - Disable Client Status Messages.
1 – Enable Client Status Messages (number messages).
2 - Enable Client Status Messages (text messeges).
+OMASTAT – Display Client Status message
AT+OMASTAT? Read command returns a list of status messages from the Sprint Client:
000 Polling Timeout
100 OMA NIA Received
101 Connecting to OMA DM Server
102 Connection to OMA DM server failed
103 OMA Session Completed
200 Starting CI DC
201 CI DC Completed
202 CI DC Failed
203 Starting CI PRL
204 CI PRL Completed
205 CI PRL Failed
206 Starting CI FUMO
207 CI FUMO Completed
208 CI FUMO Failed
300 Radio reset required
301 Radio reset complete
302 Waiting on idle/dormant state for radio reset
400 Downloading FUMO Binary
401 Download of FUMO Binary Complete
402 Rebooting for FUMO install
403 FUMO install completed
404 No FUMO Update available
405 Waiting for next maintenance window for reset or reboot.
500 Conditions in DM-HFA-05 requires HFA to run.
501 HFA Completed
502 407 code Received from DM server
503 Waiting for HFA Retry

AT+OMASTAT= Test command returns the supported parameters.

?
Example AT+OMASTAT=1
OK

Reference 3GPP TS 27.007

HFA Session:

AT+HFA=1
AT+HFA=2

OMASTAT Massage:

500 Conditions in DM-HFA-05 requires HFA to run.

200 Starting CI DC
101 Connecting to OMA DM Server
103 OMA Session Completed
201 CI DC Completed
203 Starting CI PRL
101 Connecting to OMA DM Server
103 OMA Session Completed
204 CI PRL Completed
---------- REBOOT ----------
206 Starting CI FUMO
101 Connecting to OMA DM Server
103 OMA Session Completed
404 No FUMO Update available
208 CI FUMO Failed
501 HFA Completed
OMADM Session:

AT+OMADM=1
AT+OMADM=2

OMASTAT Massage:
200 Starting CI DC
101 Connecting to OMA DM Server
103 OMA Session Completed
201 CI DC Completed
---------- REBOOT ----------

PRL Session:

AT+PRL=1
AT+PRL=2

OMASTAT Massage:
203 Starting CI PRL
101 Connecting to OMA DM Server
103 OMA Session Completed
204 CI PRL Completed

FOTA Session:

AT#SWMENA=1 -> Set the SWM to enable

AT#SWMCFG=,3 ->Set the PDP_CID to 3
AT#REBOOT

---------- REBOOT ----------

AT#SWMCHKUPD ->Check if an update is available.

in the first Fota session the server will return release without doing
nothing.

#OTAEV: #907
#OTAEV: #DREL

AT#SWMCHKUPD ->Check if an update is available

#OTAEV: #907
#SWMCHKUPD:1,8510844,LE910C1-96-243,V_25.00.243,deltafota_LE910A4_V_25.00.001-
B096_to_V_25.00.243_LE910C1_NS_LE910C1_NS_CUST_046_test.upd

AT#SWMGETDP=1 -> Download the delta

#SWMDLPRGRSS: 0,8510844

#SWMDLPRGRSS: 851084,8510844

#SWMDLPRGRSS: 1702168,8510844

#SWMDLPRGRSS: 2553253,8510844

#SWMDLPRGRSS: 3404337,8510844
#SWMDLPRGRSS: 4255422,8510844

#SWMDLPRGRSS: 5106506,8510844

#SWMDLPRGRSS: 5957590,8510844

#SWMDLPRGRSS: 6808675,8510844

#SWMDLPRGRSS: 7659759,8510844

#SWMDLPRGRSS: 8510844,8510844

#OTAEV: #919

#SWMRING: 2,LE910C1-96-243,V_25.00.243,deltafota_LE910A4_V_25.00.001-
B096_to_V_25.00.243_LE910C1_NS_LE910C1_NS_CUST_046_test.upd;,http://telit-
swm.redbend.com:8080/DPInfo?DPID=85304997195015616717868199607178616897

AT#SWMDEPLOYDP=1 -> Install the delta

#OTAEV: #DREL
---------- REBOOT ----------