Fisika Termal

Tim Fisika Termal Jurusan Fisika

Universitas Andalas
1.Dr. Techn. Marzuki MSc.Eng
2.Dwipuji Astuti, M.Si
3.Dr.rer.nat Muldarisnur
 Lecture 13. Thermodynamic Potentials (Ch. 5)
So far, we have been using the total internal energy U and, sometimes, the
enthalpy H to characterize various macroscopic systems. These functions are called
the thermodynamic potentials: all the thermodynamic properties of the system can
be found by taking partial derivatives of the TP.

For each TP, a set of so-called “natural variables” exists:

d U  T d S  P dV   d N d H  T d S  V dP   d N
Today we’ll introduce the other two thermodynamic potentials: the Helmhotz free
energy F and Gibbs free energy G. Depending on the type of a process, one of
these four thermodynamic potentials provides the most convenient description (and
is tabulated). All four functions have units of energy.

When considering different types of

Potential Variables
processes, we will be interested in two main
U (S,V,N) S, V, N issues:
H (S,P,N) S, P, N what determines the stability of a system
and how the system evolves towards an
F (T,V,N) V, T, N equilibrium;
G (T,P,N) P, T, N how much work can be extracted from a
system.
 Diffusive Equilibrium and Chemical Potential
For completeness, let’s recall what we’ve learned about the chemical potential.
1 P 
d U  T d S  P dV   d N dS d U  dV  d N
T T T
The meaning of the partial derivative (S/N)U,V : let’s fix
VA and VB (the membrane’s position is fixed), but
UA, VA, SA UB, VB, SB assume that the membrane becomes permeable for gas
molecules (exchange of both U and N between the sub-
systems, the molecules in A and B are the same ).
For sub-systems in  S AB   S AB   S A  SB  S  
diffusive equilibrium:
  0   0    
 U A VA , N A  N A U A , VA  N A  NB  N U ,V T

 S   U 
  T     - the chemical
S  N U ,V  N  S ,V potential

In equilibrium, TA  TB  A  B PA  PB
NA
Sign “-”: out of equilibrium, the system with the larger
S/N will get more particles. In other words, particles
UA will flow from from a high /T to a low /T.
  S   U 
Chemical Potential of an Ideal gas   T     
 N U ,V  N  S ,V
 has units of energy: it’s an amount of energy we need to (usually) remove
from the system after adding one particle in order to keep its total energy fixed.

   4 m  
3/ 2
5
Monatomic ideal gas: S ( N ,V ,U )  N k B ln V  U    ln N 5/ 2
 
    
2
 3h 2 



 S  V  2  m  
3/ 2
 h3 P 
  T     k BT ln   2 k BT    k BT ln  
5/ 2 
 N U ,V  N  h    2m k BT  
3/ 2

At normal T and P,  for an ideal gas is negative (e.g., for He,  ~ - 5·10-20 J ~ - 0.3 eV).
Sign “-”: by adding particles to this system, we increase its entropy. To keep
dS = 0, we need to subtract some energy, thus U is negative.

The chemical potential increases with with its pressure. Thus, the 0
molecules will flow from regions of high density to regions of lower when P
density or from regions of high pressure to those of low pressure . increases

Note that  in this case is negative because S increases with n. This is not always the
case. For example, for a system of fermions at T0, the entropy is zero (all the lowest
states are occupied), but adding one fermion to the system costs some energy (the Fermi
energy). Thus,
 T  0  EF  0
 The Quantum Concentration

 V  2 m 
3/ 2
   h 2

3/ 2
  n

   k BT ln   2 k BT    k BT ln n  
   k BT ln  
 N  h     2  mkBT   n 
 Q
where n=N/V is the concentration of particles

When n << nQ (In the limit of low densities), the gas is in the classical regime, and <0.
When n  nQ,   0

 2 m
3/ 2
 - the so-called quantum concentration (one particle per
nQ   2 k BT  cube of side equal to the thermal de Broglie wavelength).
 h 
3/ 2
h h 1  mkBT 
dB   nQ   
p mkBT dB3  h2 
At T=300K, P=105 Pa , n << nQ. When n  nQ, the quantum statistics comes into play.
 Isolated Systems, independent variables S and V
Advantages of U : it is conserved for an isolated system (it also has a simple physical
meaning – the sum of all the kin. and pot. energies of all the particles).
In particular, for an isolated system Q=0, and dU = W.

Earlier, by considering the total differential of S as a function of variables U, V, and

N, we arrived at the thermodynamic identity for quasistatic processes :

dU S ,V , N   T dS  PdV  dN
The combination of parameters on the right side is equal to the exact differential of U
. This implies that the natural variables of U are S, V, N,

Considering S, V, and N  U   U   U 
as independent variables: dU ( S ,V , N )    dS    dV    dN
  S V , N   V S ,N   N  S ,V

Since these two equations for dU must yield  U   U   U 

the same result for any dS and dV, the    T     P    
  S V , N   V S ,N   N  S ,V
corresponding coefficients must be the same:

Again, this shows that among several macroscopic variables that characterize the
system (P, V, T, , N, etc.), only three are independent, the other variables can be
found by taking partial derivatives of the TP with respect to its natural variables.
 Isolated Systems, independent variables S and V (cont.)

Work is the transfer of energy to a system by a change in the external parameters

such as volume, magnetic and electric fields, gravitational potential, etc. We can
represent W as the sum of two terms, a mechanical work on changing the volume of
a system (an “expansion” work) - PdV and all other kinds of work, Wother
(electrical work, work on creating the surface area, etc.):
 W   PdV   Wother
If the system comprises only solids and liquids, we can usually assume dV  0, and
the difference between W and Wother vanishes. For gases, the difference may be
very significant.
initially, the system is not necessarily in equilibrium
The energy balance for
an isolated system : dU  T dS  PdV   Wother  0 (for fixed N)

 Wother  PdV  TdS

If we consider a quasi-static process (the system evolves from one equilibrium state to
the other), than, since for an isolated system Q=TdS=0,
 Wother  PdV
 Equilibrium in Isolated Systems
UA, VA, SA UB, VB, SB
For a thermally isolated system Q = 0. If the
volume is fixed, then no work gets done (W = 0)
and the internal energy is conserved: U  const
While this constraint is always in place, the system might be out of equilibrium (e.g.,
we move a piston that separates two sub-systems, see Figure). If the system is
initially out of equilibrium, then some spontaneous processes will drive the
system towards equilibrium. In a state of stable equilibrium no further spontaneous
processes (other than ever-present random fluctuations) can take place. The
equilibrium state corresponds to the maximum multiplicity and maximum entropy. All
microstates in equilibrium are equally accessible (the system is in one of these
microstates with equal probability).
S eq  max
This implies that in any of these spontaneous processes, the entropy tends to
increase, and the change of entropy satisfies the condition
dS  0 S
Suppose that the system is characterized by a parameter
x which is free to vary (e.g., the system might consist of
ice and water, and x is the relative concentration of ice).
By spontaneous processes, the system will approach the
stable equilibrium (x = xeq) where S attains its absolute
maximum.
xeq x
 Enthalpy (independent variables S and P)
The volume V is not the most convenient independent variable. In
the lab, it is usually much easier to control P than it is to control V.
To change the natural variables, we can use the following trick:

U S ,V   U S ,V   PV

dH  d U  PV   dU  PdV  VdP
dH  TdS  VdP dH S , P, N   T dS  VdP  dN
dU  T dS  PdV
H (the enthalpy) is also a thermodynamic potential, with its natural variables S, P, and N.
- the internal energy of a system plus the work needed to make room for it at
P=const.

 H   H   H 
The total differential of H in terms dH S , P, N     dS    dP    dN
of its independent variables :  S  P , N  P  S , N  N  S , P

 H   H   H 
Comparison yields the relations:   T   V   
 S  P , N  P  S , N  N  S , P

In general, if we consider processes with “other” work: dH  TdS  VdP   Wother

 Processes at P = const , Wother = 0
For what kind of processes is H the most convenient thermodynamic potential?
At this point, we have to consider a system which is not isolated: it is in a thermal
contact with a thermal reservoir.

dH  TdS  VdP   Wother   Q  VdP   Wother

Let’s consider the P = const processes with purely “expansion” work (Wother = 0),

dH P,Wother 0
 Q
For such processes, the change of enthalpy is equal to the thermal energy (“heat”)
received by a system.

 Q   H  For the processes with P = const and  Wother = 0, the

CP       enthalpy plays the same part as the internal energy for
 T  P  T  P the processes with V = const and Wother = 0.

Example: the evaporation of liquid from an open vessel is such a process, because
no effective work is done. The heat of vaporization is the enthalpy difference
between the vapor phase and the liquid phase.
 Systems in Contact with a Thermal Reservoir
When we consider systems in contact with a large thermal reservoir (a “thermal bath,
there are two complications: (a) the energy in the system is no longer fixed (it may
flow between the system and reservoir), and (b) in order to investigate the stability of
an equilibrium, we need to consider the entropy of the combined system (= the
system of interest+the reservoir) – according to the 2nd Law, this total entropy should
be maximized.

What should be the system’s behavior in order to maximize the total entropy?

For the systems in contact with a eat bath, we need to invent a better, more useful
approach. The entropy, along with V and N, determines the system’s energy U =U
(S,V,N). Among the three variable, the entropy is the most difficult to control (the
entropy-meters do not exist!). For an isolated system, we have to work with the
entropy – it cannot be replaced with some other function. And we did not want to do
this so far – after all, our approach to thermodynamics was based on this concept.
However, for systems in thermal contact with a reservoir, we can replace the entropy
with another, more-convenient-to-work-with function. This, of course, does not mean
that we can get rid of entropy. We will be able to work with a different “energy-like”
thermodynamic potential for which entropy is not one of the natural variables.
 Helmholtz Free Energy (independ. variables T and V)
Let’s do the trick (Legendre transformation) again, now to exclude S :

U S ,V   U S ,V   T S F  U T S Helmholtz free energy

d U  TS   TdS  PdV  SdT  TdS  SdT  PdV dF T ,V , N   SdT  PdV  dN

 F   F   F 
The natural variables for F are T, V, N: dF T ,V , N     dT    dV    dN
 T V , N  V T , N  N T ,V

 F   F   F 
Comparison yields the relations:    S    P   
 T V , N  V T , N  N T ,V

 F   F   U   S 
    P can be rewritten as: P       T 
 V T , N  V T , N  V T , N  V T , N
The first term – the “energy” pressure – is dominant in most solids, the second term
– the “entropy” pressure – is dominant in gases. (For an ideal gas, U does not
depend on V, and only the second term survives).

F is the total energy needed to create the system, minus the heat we can get “for
free” from the environment at temperature T. If we annihilate the system, we
can’t recover all its U as work, because we have to dispose its entropy at a non-
zero T by dumping some heat into the environment.
 The Minimum Free Energy Principle (V,T = const)
The total energy of the combined system (= the system of interest+the reservoir) is
U = UR+Us, this energy is to be shared between the reservoir and the system (we
assume that V and N for all the systems are fixed). Sharing is controlled by the
S R s U R ,U s   S R U  U s   Ss U s   max
maximum entropy principle:

system’s parameters only

Since U ~ UR >> Us
 S  U 
S R  s U ,U s   S R U    R  U s   S s U s   S R U    s  S s   S R U   s
F
 U  T  T
SR+s reservoir loss in SR due to gain in Ss due to
+system transferring Us to transferring Us to
the system the system

Us
dS R  s U ,U s   dS s    dU s  TdSs    s
Fs dU s 1 dF
T T T
system
Thus, we can enforce the maximum entropy principle by simply
stable Us minimizing the Helmholtz free energy of the system without
equilibrium having to know anything about the reservoir except that it
maintains a fixed T! Under these conditions (fixed T, V, and N),
the maximum entropy principle of an isolated system is transformed into a minimum
Helmholtz free energy principle for a system in thermal contact with the thermal bath.
 Processes at T = const
In general, if we consider processes with “other” work: dF   SdT  PdV   Wother
For the processes at T = const
(in thermal equilibrium with a large reservoir): dF T   PdV   Wother T
The total work performed on a system at T = const in a reversible process is equal
to the change in the Helmholtz free energy of the system. In other words, for the T =
const processes the Helmholtz free energy gives all the reversible work.

Problem: Consider a cylinder separated into two parts by an adiabatic piston.

Compartments a and b each contains one mole of a monatomic ideal gas, and their
initial volumes are Vai=10l and Vbi=1l, respectively. The cylinder, whose walls allow
heat transfer only, is immersed in a large bath at 00C. The piston is now moving
reversibly so that the final volumes are Vaf=6l and Vbi=5l. How much work is delivered
by (or to) the system?

The process is isothermal : dF T   PdV T

Vaf Vbf
UA, VA, SA UB, VB, SB
The work delivered
 W   Wa   Wb   dFa   dFb
by the system:
Vai Vbi

3 3 T V 
F  U  TS  RT   RT ln  RT ln  Tf ( N , m) 

For one mole of 2 2 T0 V0 
monatomic ideal gas: Vaf Vbf
 W  RT ln  RT ln  2.6 103 J
Vai Vbi
 Gibbs Free Energy (independent variables T and P)
Let’s do the trick of Legendre transformation again, now to exclude both S and V :

U S ,V   U T , P  T S  PV

G  U  T S  PV - the thermodynamic potential G is called the Gibbs free energy.

Let’s rewrite dU in terms of independent variables T and P :

dU  TdS  PdV  d (TS )  SdT  d PV   VdP d U  TS  PV   SdT  VdP

dGT , P, N   SdT  VdP  dN

 G   G   G 
Considering T, P, and N as dGT , P, N     dT    dP    dN
independent variables:  T  P, N  P T , N  N T , P

 G   G   G 
Comparison yields the relations:    S   V   
 T  P, N  P T , N  N T , P
 Gibbs Free Energy and Chemical Potential

Combining U  T S  PV  N with G  U  T S  PV  G  N

- this gives us a new interpretation of the chemical potential: at least for the systems
with only one type of particles, the chemical potential is just the Gibbs free energy
per particle.

 G 
The chemical potential   
 N T , P

If we add one particle to a system, holding T and P fixed, the Gibbs free energy of
the system will increase by . By adding more particles, we do not change the value
of  since we do not change the density:   (N).

Note that U, H, and F, whose differentials also have the term dN, depend on N non-
linearly, because in the processes with the independent variables (S,V,N), (S,P,N),
and (V,T,N),  = (N) might vary with N.
 Example:
Pr.5.9. Sketch a qualitatively accurate graph of G vs. T for a pure substance as it
changes from solid to liquid to gas at fixed pressure.

 G  - the slope of the graph G(T ) at fixed P should be –S.

   S Thus, the slope is always negative, and becomes
 T  P , N
steeper as T and S increases. When a substance
G undergoes a phase transformation, its entropy increases
abruptly, so the slope of G(T ) is discontinuous at the
transition.

solid
liquid gas
 G 
   S G   ST
 T  P
T
S - these equations allow computing Gibbs
free energies at “non-standard” T (if G is
tabulated at a “standard” T)
solid
gas
liquid

T
 The Minimum Free Energy Principle (P,T = const)
The total energy of the combined system (=the system of interest+the reservoir) is
U = UR+Us, this energy is to be shared between the reservoir and the system (we
assume that P and N for all the systems are fixed). Sharing is controlled by the
maximum entropy principle:
S R s U R ,U s   S R U  U s   Ss U s   max

dS R  s U ,U s   dS s   dVs   dU s  TdSs  PdVs    s

dU s P 1 dG
T V T T
SR+s Thus, we can enforce the maximum entropy principle by
reservoir
simply minimizing the Gibbs free energy of the system
+system
without having to know anything about the reservoir
except that it maintains a fixed T! Under these conditions
Us (fixed P, V, and N), the maximum entropy principle of
Gs
an isolated system is transformed into a minimum
system Gibbs free energy principle for a system in the
Us thermal contact + mechanical equilibrium with the
stable
equilibrium
reservoir.
dG T ,P, N  0
Thus, if a system, whose parameters T,P, and N are fixed, is in thermal contact
with a heat reservoir, the stable equilibrium is characterized by the condition: G  min
G/T is the net entropy cost that the reservoir pays for allowing the system to have volume
V and energy U, which is why minimizing it maximizes the total entropy of the whole
combined system.
 Processes at P = const and T = const
Let’s consider the processes at P = const and T = const in general, including the
processes with “other” work:
 W   PdV   Wother
dG  d U  T S  PV T , P  Q  PdV   Wother T , P  TdS  PdV
Then

  Q T , P   Wother T , P  TdS   Wother T , P

The “other” work performed on a system at T = const and P = const in a reversible
process is equal to the change in the Gibbs free energy of the system.

In other words, the Gibbs free energy gives all the reversible work except the PV work.
If the mechanical work is the only kind of work performed by a system, the Gibbs free
energy is conserved: dG = 0.

Gibbs Free Energy and the Spontaneity of Chemical Reactions

The Gibbs free energy is particularly useful when we consider the chemical
reactions at constant P and T, but the volume changes as the reaction proceeds.
G associated with a chemical reaction is a useful indicator of weather the reaction
will proceed spontaneously. Since the change in G is equal to the maximum
“useful” work which can be accomplished by the reaction, then a negative G
indicates that the reaction can happen spontaneously. On the other hand, if G
is positive, we need to supply the minimum “other” work  Wother= G to make the
reaction go.
 V
Electrolysis of Water - +
I I
By providing energy from a battery, water can be dissociated H2 O2
into the diatomic molecules of hydrogen and oxygen.
Electrolysis is a (slow) process that is both isothermal and
isobaric (P,T = const).
The tank is filled with an electrolyte, e.g. dilute sulfuric acid
(we need some ions to provide a current path), platinum
electrodes do not react with the acid. 
Dissociation: H 2SO 4  2 H   SO 4
When I is passed through the cell, H+ move to the “-” electrode: 2 H   2e-  H 2
1
The sulfate ions move to the “+” electrode: SO 4  H 2O  H 2SO 4  O2  2e-
--

2
1
The sum of the above steps: H 2O  H 2  O2
2
The electrical work required
to decompose 1 mole of water: Wother   G  G H 2  
1
GO2   GH 2O
(neglect the Joule heating of electrolyte) 2

In the Table (p. 404), the Gibbs free energy G represents the change in G upon
forming 1 mole of the material starting with elements in their most stable pure
GH2   0 GO2   0 GH2O  237 kJ/mole
states:

Wother  G  237 kJ/mole

 1
Electrolysis of Water (cont.) H 2O  H 2  O2
2
Convenience of G: let’s consider the same reaction, but treat it in terms of U, V,
and S:
Wother  G  U  PV  TS
PV: we will neglect the initial volume of water in comparison with the final volume
of gas. By dissociating 1 mole of water, we’ll get 1.5 moles of gas. The work by gas:
W  PV  nRT  1.5 mol 8.3 J/mol  K 300 K   3.7 kJ
-TS: the entropy of a mole of substance (from the same Table, p.404) –
S(H2)=130.7 J/K, S(O2)=205.1 J/K, S(H2O)=69.9 J/K,

 TS  300 K 130.7 J/K  0.5  205.1 J/K - 69.9 J/K   49 kJ
U: ???? – not in the Table...
Well, we got H in the Table - H(H2) =
0, H(O2) = 0, H(H2O)= - 285.8 kJ (H
upon forming 1 mol of the material
starting with elements in their most stable
pure states).

G  H - TS
286 kJ - 49 kJ  237 kJ
 Electrolysis of Water (cont.)
The process must provide the energy for the dissociation plus the energy to expand
the produced gases. Both of those are included in H. Since the enthalpy H = U+PV,
the change in internal energy U is then:

U  H - PV  286 kJ - 4 kJ  282 kJ

However, it is not necessary to put in the whole amount in the form of electrical
energy. Since the entropy increases in the process of dissociation, the amount T S
can be provided from the environment. Since the electrolysis results in an increase in
entropy, the environment “helps” the process by contributing T S .

The min. voltage required for electrolysis:

1
W  237 kJ  V  I  t  V  Q  V   2 N Ae
*
H 2O  H 2  O2
2
G 2.37 105 J/mole I
V0    1.23 V
2 N Ae 1.93 10 C/mole
5
Fuel cell Electrolysis
(Pr. 5.4)

If V < V0, the reaction will proceed from right to V0 V

left provided gaseous hydrogen is available at
the “+” electrode and gaseous oxygen at the “-”
electrode.
 Fuel Cells
Hydrogen and oxygen can be combined
in a fuel cell to produce electrical energy.
FC differs from a battery in that the fuel
(H2 and O2) is continuously supplied.

By running the process of electrolysis in

reverse (controllable reaction between
H2 and O2), one can extract 237 kJ of
electrical work for 1 mole of H2
consumed. The efficiency of an ideal fuel
cell :
(237 kJ / 286 kJ)x100% = 83% !
This efficiency is far greater than the
ideal efficiency of a heat engine that
burns the hydrogen and uses the heat to
power a generator.

The entropy of the gases decreases by 49 kJ/mol since the number of water molecules
is less than the number of H2 and O2 molecules combining. Since the total entropy
cannot decrease in the reaction, the excess entropy must be expelled to the
environment as heat.
 Fuel Cell at High T
Fuel cells operate at elevated temperatures (from ~700C to ~6000C). Our estimate
ignored this fact – the values of G in the Table are given at room temperature.
Pr. 5.11, which requires an estimate of the maximum electric work done by the cell
operating at 750C, shows how one can estimate G at different T by using partial
derivatives of G.
 G 
   S G   ST
 T  P Substance G(1bar, 298K) S(1bar, 298K)
- these equations allow computing Gibbs kJ/mol J/K mol
free energies at non-standard T and P: H2 0 130
At 750C (348K): O2 0 205
GH2   0  130 J/K 50 K   6.5 kJ H2O -237 70
GO2   0  205 J/K 50 K   10.25 kJ
GH2O  237 kJ  70 J/K 50 K   240.5 kJ
G  GH 2O  GH 2   GO2   240.5 kJ  6.5 kJ  5.1 kJ  -228.9 kJ
1
2
Thus, the maximum electrical work done by the cell is 229 kJ, about 3.5% less than
the room-temperature value of 237 kJ. Why the difference? The reacting gases
have more entropy at higher temperatures, and we must get rid of it by dumping
waste heat into the environment.
 Conclusion:
Potential Variables dU S ,V , N   T dS  PdV  dN
U (S,V,N) S, V, N
H (S,P,N) S, P, N
dH S , P, N   T dS  VdP  dN
F (T,V,N) V, T, N dF T ,V , N   S dT  PdV  dN
G (T,P,N) P, T, N
dGT , P, N   S dT  VdP  dN